| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use READ_ONCE() when loading the posted interrupt descriptor control
field to ensure "old" and "new" have the same base value. If the
compiler emits separate loads, and loads into "new" before "old", KVM
could theoretically drop the ON bit if it were set between the loads.
Fixes: 28b835d60fcc ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Save/restore IRQs when disabling IRQs in posted interrupt pre/post block
in preparation for moving the code into vcpu_put/load(), where it would be
called with IRQs already disabled.
No functional changed intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't update Posted Interrupt's NDST, a.k.a. the target pCPU, in the
pre-block path, as NDST is guaranteed to be up-to-date. The comment
about the vCPU being preempted during the update is simply wrong, as the
update path runs with IRQs disabled (from before snapshotting vcpu->cpu,
until after the update completes).
Since commit 8b306e2f3c41 ("KVM: VMX: avoid double list add with VT-d
posted interrupts", 2017-09-27) The vCPU can get preempted _before_
the update starts, but not during. And if the vCPU is preempted before,
vmx_vcpu_pi_load() is responsible for updating NDST when the vCPU is
scheduled back in. In that case, the check against the wakeup vector in
vmx_vcpu_pi_load() cannot be true as that would require the notification
vector to have been set to the wakeup vector _before_ blocking.
Opportunistically switch to using vcpu->cpu for the list/lock lookups,
which do not need pre_pcpu since the same commit.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-25-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return bools instead of ints for the posted interrupt "test" helpers.
The bit position of the flag being test does not matter to the callers,
and is in fact lost by virtue of test_bit() itself returning a bool.
Returning ints is potentially dangerous, e.g. "pi_test_on(pi_desc) == 1"
is safe-ish because ON is bit 0 and thus any sane implementation of
pi_test_on() will work, but for SN (bit 1), checking "== 1" would rely on
pi_test_on() to return 0 or 1, a.k.a. bools, as opposed to 0 or 2 (the
positive bit position).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-24-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop sanity checks on the validity of the previous pCPU when handling
vCPU block/unlock for posted interrupts. The intention behind the sanity
checks is to avoid memory corruption in case of a race or incorrect locking,
but the code has been stable for a few years now and the checks get in
the way of eliminating kvm_vcpu.pre_cpu.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-23-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly skip posted interrupt updates if APICv is disabled in all of
KVM, or if the guest doesn't have an in-kernel APIC. The PI descriptor
is kept up-to-date if APICv is inhibited, e.g. so that re-enabling APICv
doesn't require a bunch of updates, but neither the module param nor the
APIC type can be changed on-the-fly.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add helpers to wake and query a blocking vCPU. In addition to providing
nice names, the helpers reduce the probability of KVM neglecting to use
kvm_arch_vcpu_get_wait().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Call kvm_vcpu_block() directly for all wait states except HALTED so that
kvm_vcpu_halt() is no longer a misnomer on x86.
Functionally, this means KVM will never attempt halt-polling or adjust
vcpu->halt_poll_ns for INIT_RECEIVED (a.k.a. Wait-For-SIPI (WFS)) or
AP_RESET_HOLD; UNINITIALIZED is handled in kvm_arch_vcpu_ioctl_run(),
and x86 doesn't use any other "wait" states.
As mentioned above, the motivation of this is purely so that "halt" isn't
overloaded on x86, e.g. in KVM's stats. Skipping halt-polling for WFS
(and RESET_HOLD) has no meaningful effect on guest performance as there
are typically single-digit numbers of INIT-SIPI sequences per AP vCPU,
per boot, versus thousands of HLTs just to boot to console.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Go directly to kvm_vcpu_block() when handling the case where userspace
attempts to run an UNINITIALIZED vCPU. The vCPU is not halted, nor is it
likely that halt-polling will be successful in this case.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Calculate the halt-polling "stop" time using "start" instead of redoing
ktime_get(). In practice, the numbers involved are in the noise (e.g.,
in the happy case where hardware correctly predicts do_halt_poll and
there are no interrupts, "start" is probably only a few cycles old)
and either approach is perfectly ok. But it's more precise to count
any extra latency toward the halt-polling time.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a "blocking" stat that userspace can use to detect the case where a
vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on
x86, WFI on arm64, etc... Current guest/host/halt stats don't show this
well, e.g. if a guest halts for a long period of time then the vCPU could
could appear pathologically blocked due to a host condition, when in
reality the vCPU has been put into a not-runnable state by the guest.
Originally-by: Cannon Matthews <cannonmatthews@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[sean: renamed stat to "blocking", massaged changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate
non-halt wait/sleep/block conditions that should not be subjected to
halt-polling.
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are
nops.
No functional change intended.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename a variety of HLT-related helpers to free up the function name
"kvm_vcpu_halt" for future use in generic KVM code, e.g. to differentiate
between "block" and "halt".
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke the arch hooks for block+unblock if and only if KVM actually
attempts to block the vCPU. The only non-nop implementation is on x86,
specifically SVM's AVIC, and there is no need to put the AVIC prior to
halt-polling; KVM x86's kvm_vcpu_has_events() will scour the full vIRR
to find pending IRQs regardless of whether the AVIC is loaded/"running".
The primary motivation is to allow future cleanup to split out "block"
from "halt", but this is also likely a small performance boost on x86 SVM
when halt-polling is successful.
Adjust the post-block path to update "cur" after unblocking, i.e. include
AVIC load time in halt_wait_ns and halt_wait_hist, so that the behavior
is consistent. Moving just the pre-block arch hook would result in only
the AVIC put latency being included in the halt_wait stats. There is no
obvious evidence that one way or the other is correct, so just ensure KVM
is consistent.
Note, x86 has two separate paths for handling APICv with respect to vCPU
blocking. VMX uses hooks in x86's vcpu_block(), while SVM uses the arch
hooks in kvm_vcpu_block(). Prior to this path, the two paths were more
or less functionally identical. That is very much not the case after
this patch, as the hooks used by VMX _must_ fire before halt-polling.
x86's entire mess will be cleaned up in future patches.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the put and reload of the vGIC out of the block/unblock callbacks
and into a dedicated WFI helper. Functionally, this is nearly a nop as
the block hook is called at the very beginning of kvm_vcpu_block(), and
the only code in kvm_vcpu_block() after the unblock hook is to update the
halt-polling controls, i.e. can only affect the next WFI.
Back when the arch (un)blocking hooks were added by commits 3217f7c25bca
("KVM: Add kvm_arch_vcpu_{un}blocking callbacks) and d35268da6687
("arm/arm64: KVM: arch_timer: Only schedule soft timer on vcpu_block"),
the hooks were invoked only when KVM was about to "block", i.e. schedule
out the vCPU. The use case at the time was to schedule a timer in the
host based on the earliest timer in the guest in order to wake the
blocking vCPU when the emulated guest timer fired. Commit accb99bcd0ca
("KVM: arm/arm64: Simplify bg_timer programming") reworked the timer
logic to be even more precise, by waiting until the vCPU was actually
scheduled out, and so move the timer logic from the (un)blocking hooks to
vcpu_load/put.
In the meantime, the hooks gained usage for enabling vGIC v4 doorbells in
commit df9ba95993b9 ("KVM: arm/arm64: GICv4: Use the doorbell interrupt
as an unblocking source"), and added related logic for the VMCR in commit
5eeaf10eec39 ("KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block").
Finally, commit 07ab0f8d9a12 ("KVM: Call kvm_arch_vcpu_blocking early
into the blocking sequence") hoisted the (un)blocking hooks so that they
wrapped KVM's halt-polling logic in addition to the core "block" logic.
In other words, the original need for arch hooks to take action _only_
in the block path is long since gone.
Cc: Oliver Upton <oupton@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the clearing of valid_wakeup from kvm_arch_vcpu_block_finish() so
that a future patch can drop said arch hook. Unlike the other blocking-
related arch hooks, vcpu_blocking/unblocking(), vcpu_block_finish() needs
to be called even if the KVM doesn't actually block the vCPU. This will
allow future patches to differentiate between truly blocking the vCPU and
emulating a halt condition without introducing a contradiction.
Alternatively, the hook could be renamed to kvm_arch_vcpu_halt_finish(),
but there's literally one call site in s390, and future cleanup can also
be done to handle valid_wakeup fully within kvm_s390_handle_wait() and
allow generic KVM to drop vcpu_valid_wakeup().
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the halt-polling "success" and histogram stats update into the
dedicated helper to fix a discrepancy where the success/fail "time" stats
consider polling successful so long as the wait is avoided, but the main
"success" and histogram stats consider polling successful if and only if
a wake event was detected by the halt-polling loop.
Move halt_attempted_poll to the helper as well so that all the stats are
updated in a single location. While it's a bit odd to update the stat
well after the fact, practically speaking there's no meaningful advantage
to updating before polling.
Note, there is a functional change in addition to the success vs. fail
change. The histogram updates previously called ktime_get() instead of
using "cur". But that change is desirable as it means all the stats are
now updated with the same polling time, and avoids the extra ktime_get(),
which isn't expensive but isn't free either.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a comment to document that halt-polling is considered successful even
if the polling loop itself didn't detect a wake event, i.e. if a wake
event was detect in the final kvm_vcpu_check_block(). Invert the param
to update helper so that the helper is a dumb function that is "told"
whether or not polling was successful, as opposed to determining success
based on blocking behavior.
Opportunistically tweak the params to the update helper to reduce the
line length for the call site so that it fits on a single line, and so
that the prototype conforms to the more traditional kernel style.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't update halt-polling stats if halt-polling wasn't attempted. This is
a nop as @poll_ns is guaranteed to be '0' (poll_end == start); in a future
patch (to move the histogram stats into the helper), it will avoid to
avoid a discrepancy in what is considered a "successful" halt-poll.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and
instead force the architecture (PPC) to define its own rcuwait object.
Allowing common KVM to directly access vcpu->wait without a guard makes
it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(),
kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not
the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for
PPC.
Due to PPC's shenanigans with respect to callbacks and waits (it switches
to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether
or not this fixes any bugs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of
kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical,
largely benign bug on s390 where the result of kvm_arch_no_poll() could
change due to userspace modifying halt_poll_max_steal while the vCPU is
blocking. The bug is largely benign as it will either cause KVM to skip
updating halt-polling times (no_poll toggles false=>true) or to update
halt-polling times with a slightly flawed block_ns.
Note, READ_ONCE is unnecessary in the current code, add it in case the
arch hook is ever inlined, and to provide a hint that userspace can
change the param at will.
Fixes: 8b905d28ee17 ("KVM: s390: provide kvm_arch_no_poll function")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ensure vcpu->cpu is read once when signalling the AVIC doorbell. If the
compiler rereads the field and the vCPU is migrated between the check and
writing the doorbell, KVM would signal the wrong physical CPU.
Functionally, signalling the wrong CPU in this case is not an issue as
task migration means the vCPU has exited and will pick up any pending
interrupts on the next VMRUN. Add the READ_ONCE() purely to clean up the
code.
Opportunistically add a comment explaining the task migration behavior,
and rename cpuid=>cpu to avoid conflating the CPU number with KVM's more
common usage of CPUID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't configure the wakeup handler when a vCPU is blocking with IRQs
disabled, in which case any IRQ, posted or otherwise, should not be
recognized and thus should not wake the vCPU.
Fixes: bf9f6ac8d749 ("KVM: Update Posted-Interrupts Descriptor when vCPU is blocked")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
change 0 to false and 1 to true to fix following cocci warnings:
arch/x86/kvm/mmu/mmu.c:1485:9-10: WARNING: return of 0/1 in function 'kvm_set_pte_rmapp' with return type bool
arch/x86/kvm/mmu/mmu.c:1636:10-11: WARNING: return of 0/1 in function 'kvm_test_age_rmapp' with return type bool
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Message-Id: <20211114164312.GA28736@makvihas>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If we do have the vcpu mutex, as is the case if kvm_running_vcpu is set
to the target vcpu of the kick, changes to vcpu->mode do not need atomic
operations; cmpxchg is only needed _outside_ the mutex to ensure that
the IN_GUEST_MODE->EXITING_GUEST_MODE change does not race with the vcpu
thread going OUTSIDE_GUEST_MODE.
Use this to optimize the case of a vCPU sending an interrupt to itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the gotos from vmx_get_mt_mask. It's easier to build the whole
memory type at once, than it is to combine separate cacheability and
ipat fields.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-12-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for implementing in-place hugepage promotion, various
functions will need to be called from zap_collapsible_spte_range, which
has the const qualifier on its memslot argument. Propagate the const
qualifier to the various functions which will be needed. This just serves
to simplify the following patch.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The vCPU argument to mmu_try_to_unsync_pages is now only used to get a
pointer to the associated struct kvm, so pass in the kvm pointer from
the beginning to remove the need for a vCPU when calling the function.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_slot_page_track_is_active only uses its vCPU argument to get a
pointer to the assoicated struct kvm, so just pass in the struct KVM to
remove the need for a vCPU pointer.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework make_spte() to query the shadow page's role, specifically whether
or not it's a guest_mode page, a.k.a. a page for L2, when determining if
the SPTE is compatible with PML. This eliminates a dependency on @vcpu,
with a future goal of being able to create SPTEs without a specific vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This structure will replace vmcb_control_area in
svm_nested_state, providing only the fields that are actually
used by the nested state. This avoids having and copying around
uninitialized fields. The cost of this, however, is that all
functions (in this case vmcb_is_intercept) expect the old
structure, so they need to be duplicated.
In addition, in svm_get_nested_state() user space expects a
vmcb_control_area struct, so we need to copy back all fields
in a temporary structure before copying it to userspace.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-7-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the struct vmcb_control_area parameter from nested_vmcb_check_controls,
for consistency with the functions that operate on the save area. This
way, VMRUN uses the version without underscores for both areas, while
KVM_SET_NESTED_STATE uses the version with underscores.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the already checked svm->nested.save cached fields
(EFER, CR0, CR4, ...) instead of vmcb12's in
nested_vmcb02_prepare_save().
This prevents from creating TOC/TOU races, since the
guest could modify the vmcb12 fields.
This also avoids the need of force-setting EFER_SVME in
nested_vmcb02_prepare_save.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-6-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that struct vmcb_save_area_cached contains the required
vmcb fields values (done in nested_load_save_from_vmcb12()),
check them to see if they are correct in nested_vmcb_valid_sregs().
While at it, rename nested_vmcb_valid_sregs in nested_vmcb_check_save.
__nested_vmcb_check_save takes the additional @save parameter, so it
is helpful when we want to check a non-svm save state, like in
svm_set_nested_state. The reason for that is that save is the L1
state, not L2, so we check it without moving it to svm->nested.save.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-5-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nested_copy_vmcb_control_to_cache
Following the same naming convention of the previous patch,
rename nested_load_control_from_vmcb12.
In addition, inline copy_vmcb_control_area as it is only called
by this function.
__nested_copy_vmcb_control_to_cache() works with vmcb_control_area
parameters and it will be useful in next patches, when we use
local variables instead of svm cached state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-4-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is useful in the next patch, to keep a saved copy
of vmcb12 registers and pass it around more easily.
Instead of blindly copying everything, we just copy EFER, CR0, CR3, CR4,
DR6 and DR7 which are needed by the VMRUN checks. If more fields will
need to be checked, it will be quite obvious to see that they must be added
in struct vmcb_save_area_cached and in nested_copy_vmcb_save_to_cache().
__nested_copy_vmcb_save_to_cache() takes a vmcb_save_area_cached
parameter, which is useful in order to save the state to a local
variable.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20211103140527.752797-3-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Inline nested_vmcb_check_cr3_cr4 as it is not called by anyone else.
Doing so simplifies next patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211103140527.752797-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate the "new" memslot for !DELETE memslot updates straight away
instead of filling an intermediate on-stack object and forcing
kvm_set_memslot() to juggle the allocation and do weird things like reuse
the old memslot object in MOVE.
In the MOVE case, this results in an "extra" memslot allocation due to
allocating both the "new" slot and the "invalid" slot, but that's a
temporary and not-huge allocation, and MOVE is a relatively rare memslot
operation.
Regarding MOVE, drop the open-coded management of the gfn tree with a
call to kvm_replace_memslot(), which already handles the case where
new->base_gfn != old->base_gfn. This is made possible by virtue of not
having to copy the "new" memslot data after erasing the old memslot from
the gfn tree. Using kvm_replace_memslot(), and more specifically not
reusing the old memslot, means the MOVE case now does hva tree and hash
list updates, but that's a small price to pay for simplifying the code
and making MOVE align with all the other flavors of updates. The "extra"
updates are firmly in the noise from a performance perspective, e.g. the
"move (in)active area" selfttests show a (very, very) slight improvement.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f0d8c72727aa825cf682bd4e3da4b3fa68215dd4.1638817641.git.maciej.szmigiero@oracle.com>
|
|
Initialize the "new" memslot in the !DELETE path only after the various
sanity checks have passed. This will allow a future commit to allocate
@new dynamically without having to copy a memslot, and without having to
deal with freeing @new in error paths and in the "nothing to change" path
that's hiding in the sanity checks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <a084d0531ca3a826a7f861eb2b08b5d1c06ef265.1638817641.git.maciej.szmigiero@oracle.com>
|
|
Do a quick lookup for possibly overlapping gfns when creating or moving
a memslot instead of performing a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked params to avoid churn in future cleanup]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <a4795e5c2f624754e9c0aab023ebda1966feb3e1.1638817641.git.maciej.szmigiero@oracle.com>
|
|
Introduce a memslots gfn upper bound operation and use it to optimize
kvm_zap_gfn_range().
This way this handler can do a quick lookup for intersecting gfns and won't
have to do a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <ef242146a87a335ee93b441dcf01665cb847c902.1638817641.git.maciej.szmigiero@oracle.com>
|
|
kvm_invalidate_memslot()
kvm_invalidate_memslot() calls kvm_arch_flush_shadow_memslot() on the
active, but KVM_MEMSLOT_INVALID slot.
Do it on the inactive (but valid) old slot instead since arch code really
should not get passed such invalid slot.
Note that this means that the "arch" field of the slot provided to
kvm_arch_flush_shadow_memslot() may have stale data since this function
is called with slots_arch_lock released.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <813595ecc193d6ae39a87709899d4251523b05f8.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
|
|
And use it where s390 code would just access the memslot with the highest
gfn directly.
No functional change intended.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <42496041d6af1c23b1cbba2636b344ca8d5fc3af.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.
This significantly hurts performance of per-hva operations with higher
memslot counts.
Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.
[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Memslot ID to the corresponding memslot mappings are currently kept as
indices in static id_to_index array.
The size of this array depends on the maximum allowed memslot count
(regardless of the number of memslots actually in use).
This has become especially problematic recently, when memslot count cap was
removed, so the maximum count is now full 32k memslots - the maximum
allowed by the current KVM API.
Keeping these IDs in a hash table (instead of an array) avoids this
problem.
Resolving a memslot ID to the actual memslot (instead of its index) will
also enable transitioning away from an array-based implementation of the
whole memslots structure in a later commit.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Since kvm_memslot_move_forward() can theoretically return a negative
memslot index even when kvm_memslot_move_backward() returned a positive one
(and so did not WARN) let's just move the warning to the common code.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <eeed890ccb951e7b0dce15bc170eb2661d5b02da.1638817640.git.maciej.szmigiero@oracle.com>
|
|
s390 arch has gfn_to_memslot_approx() which is almost identical to
search_memslots(), differing only in that in case the gfn falls in a hole
one of the memslots bordering the hole is returned.
Add this lookup mode as an option to search_memslots() so we don't have two
almost identical functions for looking up a memslot by its gfn.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked helper names to keep gfn_to_memslot_approx() in s390]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
|
