| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is a no-op change which simplifies the follow up patches.
Link: https://lkml.kernel.org/r/20201106231635.3528496-7-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ep_events_available() is called multiple times around the busy loop logic,
even though the logic is generally not used. ep_reset_busy_poll_napi_id()
is similarly always called, even when busy loop is not used.
Eliminate ep_reset_busy_poll_napi_id() and inline it inside
ep_busy_loop(). Make ep_busy_loop() return whether there are any events
available after the busy loop. This will eliminate unnecessary loads and
branches, and simplifies the loop.
Link: https://lkml.kernel.org/r/20201106231635.3528496-6-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a no-op change and simply to make the code more coherent.
Link: https://lkml.kernel.org/r/20201106231635.3528496-5-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To simplify the code, pull in checking the fatal signals into
ep_send_events(). ep_send_events() is called only from ep_poll().
Note that, previously, we were always checking fatal events, but it is
checked only if eavail is true. This should be fine because the goal of
that check is to quickly return from epoll_wait() when there is a pending
fatal signal.
Link: https://lkml.kernel.org/r/20201106231635.3528496-4-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check signals before locking ep->lock, and immediately return -EINTR if
there is any signal pending.
This saves a few loads, stores, and branches from the hot path and
simplifies the loop structure for follow up patches.
Link: https://lkml.kernel.org/r/20201106231635.3528496-3-soheil.kdev@gmail.com
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Cc: Guantao Liu <guantaol@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "simplify ep_poll".
This patch series is a followup based on the suggestions and feedback by
Linus:
https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com
The first patch in the series is a fix for the epoll race in presence of
timeouts, so that it can be cleanly backported to all affected stable
kernels.
The rest of the patch series simplify the ep_poll() implementation. Some
of these simplifications result in minor performance enhancements as well.
We have kept these changes under self tests and internal benchmarks for a
few days, and there are minor (1-2%) performance enhancements as a result.
This patch (of 8):
After abc610e01c66 ("fs/epoll: avoid barrier after an epoll_wait(2)
timeout"), we break out of the ep_poll loop upon timeout, without checking
whether there is any new events available. Prior to that patch-series we
always called ep_events_available() after exiting the loop.
This can cause races and missed wakeups. For example, consider the
following scenario reported by Guantao Liu:
Suppose we have an eventfd added using EPOLLET to an epollfd.
Thread 1: Sleeps for just below 5ms and then writes to an eventfd.
Thread 2: Calls epoll_wait with a timeout of 5 ms. If it sees an
event of the eventfd, it will write back on that fd.
Thread 3: Calls epoll_wait with a negative timeout.
Prior to abc610e01c66, it is guaranteed that Thread 3 will wake up either
by Thread 1 or Thread 2. After abc610e01c66, Thread 3 can be blocked
indefinitely if Thread 2 sees a timeout right before the write to the
eventfd by Thread 1. Thread 2 will be woken up from
schedule_hrtimeout_range and, with evail 0, it will not call
ep_send_events().
To fix this issue:
1) Simplify the timed_out case as suggested by Linus.
2) while holding the lock, recheck whether the thread was woken up
after its time out has reached.
Note that (2) is different from Linus' original suggestion: It do not set
"eavail = ep_events_available(ep)" to avoid unnecessary contention (when
there are too many timed-out threads and a small number of events), as
well as races mentioned in the discussion thread.
This is the first patch in the series so that the backport to stable
releases is straightforward.
Link: https://lkml.kernel.org/r/20201106231635.3528496-1-soheil.kdev@gmail.com
Link: https://lkml.kernel.org/r/CAHk-=wizk=OxUyQPbO8MS41w2Pag1kniUV5WdD5qWL-gq1kjDA@mail.gmail.com
Link: https://lkml.kernel.org/r/20201106231635.3528496-2-soheil.kdev@gmail.com
Fixes: abc610e01c66 ("fs/epoll: avoid barrier after an epoll_wait(2) timeout")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Guantao Liu <guantaol@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Guantao Liu <guantaol@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem_cgroup_page_lruvec() in memcontrol.c and mem_cgroup_lruvec() in
memcontrol.h is very similar except for the param(page and memcg) which
also can be convert to each other.
So rewrite mem_cgroup_page_lruvec() with mem_cgroup_lruvec().
[alex.shi@linux.alibaba.com: add missed warning in mem_cgroup_lruvec]
Link: https://lkml.kernel.org/r/94f17bb7-ec61-5b72-3555-fabeb5a4d73b@linux.alibaba.com
[lstoakes@gmail.com: warn on missing memcg on mem_cgroup_page_lruvec()]
Link: https://lkml.kernel.org/r/20201125112202.387009-1-lstoakes@gmail.com
Link: https://lkml.kernel.org/r/20201108143731.GA74138@rlk
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A VCPU of a VM can allocate couple of pages which can be mmap'ed by the
user space application. At the moment this memory is not charged to the
memcg of the VMM. On a large machine running large number of VMs or
small number of VMs having large number of VCPUs, this unaccounted
memory can be very significant. So, charge this memory to the memcg of
the VMM. Please note that lifetime of these allocations corresponds to
the lifetime of the VMM.
Link: https://lkml.kernel.org/r/20201106202923.2087414-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some definitions are left unused, just clean them.
Link: https://lkml.kernel.org/r/20201108003834.12669-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add VM_WARN_ON_ONCE_PAGE() macro.
Since readahead page is charged on memcg too, in theory we don't have to
check this exception now. Before safely remove them all, add a warning
for the unexpected !memcg.
Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "bail out early for memcg disable".
These 2 patches are indepenedent from per memcg lru lock, and may
encounter unexpected warning, so let's move out them from per memcg
lru locking patchset.
This patch (of 2):
We could bail out early when memcg wasn't enabled.
Link: https://lkml.kernel.org/r/1604283436-18880-1-git-send-email-alex.shi@linux.alibaba.com
Link: https://lkml.kernel.org/r/1604283436-18880-2-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- IRQ handling cleanups
- Support for suspend
- Various fixes for UML specific drivers: ubd, vector, xterm
* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
um: Fix build w/o CONFIG_PM_SLEEP
um: time-travel: Correct time event IRQ delivery
um: irq/sigio: Support suspend/resume handling of workaround IRQs
um: time-travel: Actually apply "free-until" optimisation
um: chan_xterm: Fix fd leak
um: tty: Fix handling of close in tty lines
um: Monitor error events in IRQ controller
um: allocate a guard page to helper threads
um: support some of ARCH_HAS_SET_MEMORY
um: time-travel: avoid multiple identical propagations
um: Fetch registers only for signals which need them
um: Support suspend to RAM
um: Allow PM with suspend-to-idle
um: time: Fix read_persistent_clock64() in time-travel
um: Simplify os_idle_sleep() and sleep longer
um: Simplify IRQ handling code
um: Remove IRQ_NONE type
um: irq: Reduce irq_reg allocation
um: irq: Clean up and rename struct irq_fd
um: Clean up alarm IRQ chip name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2, ubi and ubifs updates from Richard Weinberger:
"JFFS2:
- Fix for a remount regression
- Fix for an abnormal GC exit
- Fix for a possible NULL pointer issue while mounting
UBI:
- Add support ECC-ed NOR flash
- Removal of dead code
UBIFS:
- Make node dumping debug code more reliable
- Various cleanups: less ifdefs, less typos
- Fix for an info leak"
* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: ubifs_dump_node: Dump all branches of the index node
ubifs: ubifs_dump_sleb: Remove unused function
ubifs: Pass node length in all node dumping callers
Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len"
ubifs: Limit dumping length by size of memory which is allocated for the node
ubifs: Remove the redundant return in dbg_check_nondata_nodes_order
jffs2: Fix NULL pointer dereference in rp_size fs option parsing
ubifs: Fixed print foramt mismatch in ubifs
ubi: Do not zero out EC and VID on ECC-ed NOR flashes
jffs2: remove trailing semicolon in macro definition
ubifs: Fix error return code in ubifs_init_authentication()
ubifs: wbuf: Don't leak kernel memory to flash
ubi: Remove useless code in bytes_str_to_int
ubifs: Fix the printing type of c->big_lpt
jffs2: Allow setting rp_size to zero during remounting
jffs2: Fix ignoring mounting options problem during remounting
jffs2: Fix GC exit abnormally
ubifs: Code cleanup by removing ifdef macro surrounding
jffs2: Fix if/else empty body warnings
ubifs: Delete duplicated words + other fixes
|
|
Pull cifs updates from Steve French:
"The largest part are for support of the newer mount API which has been
needed for cifs/smb3 mounts for a long time due to the new API's
better handling of remount, and better error reporting. There are
three additional small cleanup patches for this being tested, that are
not included yet.
This series also includes addition of support for the SMB3 witness
protocol which can provide important notifications from the server to
client on server address or export or network changes. This can be
useful for example in order to be notified before the failure - when a
server's IP address changes (in the future it will allow us to support
server notifications of when a share is moved).
It also includes three patches for stable e.g. some that better handle
some confusing error messages during session establishment"
* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
cifs: update internal module version number
cifs: Fix support for remount when not changing rsize/wsize
cifs: handle "guest" mount parameter
cifs: correct four aliased mount parms to allow use of previous names
cifs: Tracepoints and logs for tracing credit changes.
cifs: fix use after free in cifs_smb3_do_mount()
cifs: fix rsize/wsize to be negotiated values
cifs: Fix some error pointers handling detected by static checker
smb3: remind users that witness protocol is experimental
cifs: update super_operations to show_devname
cifs: fix uninitialized variable in smb3_fs_context_parse_param
cifs: update mnt_cifs_flags during reconfigure
cifs: move update of flags into a separate function
cifs: remove ctx argument from cifs_setup_cifs_sb
cifs: do not allow changing posix_paths during remount
cifs: uncomplicate printing the iocharset parameter
cifs: don't create a temp nls in cifs_setup_ipc
cifs: simplify handling of cifs_sb/ctx->local_nls
cifs: we do not allow changing username/password/unc/... during remount
cifs: add initial reconfigure support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug"
* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net/sched: sch_taprio: reset child qdiscs before freeing them
nfp: move indirect block cleanup to flower app stop callback
octeontx2-af: Fix undetected unmap PF error check
net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
qlcnic: Fix error code in probe
mptcp: fix pending data accounting
mptcp: push pending frames when subflow has free space
mptcp: properly annotate nested lock
mptcp: fix security context on server socket
net/mlx5: Fix compilation warning for 32-bit platform
mptcp: clear use_ack and use_map when dropping other suboptions
devlink: use _BITUL() macro instead of BIT() in the UAPI header
net: korina: fix return value
net/smc: fix access to parent of an ib device
ethtool: fix error paths in ethnl_set_channels()
nfc: s3fwrn5: Remove unused NCI prop commands
nfc: s3fwrn5: Remove the delay for NFC sleep
phy: fix kdoc warning
tipc: do sanity check payload of a netlink message
use __netdev_notify_peers in hyperv
...
|
|
Pull OpenRISC updates from Stafford Horne:
- New drivers and OpenRISC support for the LiteX platform
- A bug fix to support userspace gdb debugging
- Fixes one compile issue with blk-iocost
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: add local64.h to fix blk-iocost build
openrisc: fix trap for debugger breakpoint signalling
openrisc: add support for LiteX
drivers/tty/serial: add LiteUART driver
dt-bindings: serial: document LiteUART bindings
drivers/soc/litex: add LiteX SoC Controller driver
dt-bindings: soc: document LiteX SoC Controller bindings
dt-bindings: vendor: add vendor prefix for LiteX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major update to this release is that there's a new arch config
option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.
Currently, only x86_64 enables it. All the ftrace callbacks now take a
struct ftrace_regs instead of a struct pt_regs. If the architecture
has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
have enough information to read the arguments of the function being
traced, as well as access to the stack pointer.
This way, if a user (like live kernel patching) only cares about the
arguments, then it can avoid using the heavier weight "regs" callback,
that puts in enough information in the struct ftrace_regs to simulate
a breakpoint exception (needed for kprobes).
A new config option that audits the timestamps of the ftrace ring
buffer at most every event recorded.
Ftrace recursion protection has been cleaned up to move the protection
to the callback itself (this saves on an extra function call for those
callbacks).
Perf now handles its own RCU protection and does not depend on ftrace
to do it for it (saving on that extra function call).
New debug option to add "recursed_functions" file to tracefs that
lists all the places that triggered the recursion protection of the
function tracer. This will show where things need to be fixed as
recursion slows down the function tracer.
The eval enum mapping updates done at boot up are now offloaded to a
work queue, as it caused a noticeable pause on slow embedded boards.
Various clean ups and last minute fixes"
* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Offload eval map updates to a work queue
Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
ring-buffer: Add rb_check_bpage in __rb_allocate_pages
ring-buffer: Fix two typos in comments
tracing: Drop unneeded assignment in ring_buffer_resize()
tracing: Disable ftrace selftests when any tracer is running
seq_buf: Avoid type mismatch for seq_buf_init
ring-buffer: Fix a typo in function description
ring-buffer: Remove obsolete rb_event_is_commit()
ring-buffer: Add test to validate the time stamp deltas
ftrace/documentation: Fix RST C code blocks
tracing: Clean up after filter logic rewriting
tracing: Remove the useless value assignment in test_create_synth_event()
livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
MAINTAINERS: assign ./fs/tracefs to TRACING
tracing: Fix some typos in comments
ftrace: Remove unused varible 'ret'
ring-buffer: Add recording of ring buffer recursion into recursed_functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.11 merge window:
- Fix a race condition between systemd/udev and the module loader.
The module loader was sending a uevent before the module was fully
initialized (i.e., before its init function has been called). This
means udev can start processing the module uevent before the module
has finished initializing, and some udev rules expect that the
module has initialized already upon receiving the uevent.
This resulted in some systemd mount units failing if udev processes
the event faster than the module can finish init. This is fixed by
delaying the uevent until after the module has called its init
routine.
- Make the linker array sections for kernel params and module version
attributes more robust by switching to use the alignment of the
type in question.
Namely, linker section arrays will be constructed using the
alignment required by the struct (using __alignof__()) as opposed
to a specific value such as sizeof(void *) or sizeof(long). This is
less likely to cause breakages should the size of the type ever
change (Johan Hovold)
- Fix module state inconsistency by setting it back to GOING when a
module fails to load and is on its way out (Miroslav Benes)
- Some comment and code cleanups (Sergey Shtylyov)"
* tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: delay kobject uevent until after module init call
module: drop semicolon from version macro
init: use type alignment for kernel parameters
params: clean up module-param macros
params: use type alignment for kernel parameters
params: drop redundant "unused" attributes
module: simplify version-attribute handling
module: drop version-attribute alignment
module: fix comment style
module: add more 'kernel-doc' comments
module: fix up 'kernel-doc' comments
module: only handle errors with the *switch* statement in module_sig_check()
module: avoid *goto*s in module_sig_check()
module: merge repetitive strings in module_sig_check()
module: set MODULE_STATE_GOING state when a module fails to load
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- arm: added mhu-v2 controller driver
- arm_mhu_db: fix kfree by using devm_ variant
- stm32-ipcc: misc cleanup
* tag 'mailbox-v5.11' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: arm_mhuv2: Add driver
dt-bindings: mailbox : arm,mhuv2: Add bindings
mailbox: stm32-ipcc: cast void pointers to unsigned long
mailbox: stm32-ipcc: remove duplicate error message
mailbox: stm32-ipcc: add COMPILE_TEST dependency
mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support
- A series of patches to improve readdir performance, particularly
with large directories
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers
- Micro-optimisations for RDMA
- RDMA tracing improvements
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving
partial pages (Dan Aloni)
- Various fixes for getxattr and listxattr, when used over non-TCP
transports
- Fixes for containerised NFS from Sargun Dhillon
- switch nfsiod to be an UNBOUND workqueue (Neil Brown)
- READDIR should not ask for security label information if there is
no LSM policy (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum
Mackay)
- A series of RPC and NFS layer fixes to support the NFSv4.2
READ_PLUS code
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes"
* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
NFSv4/pnfs: Add tracing for the deviceid cache
fs/lockd: convert comma to semicolon
NFSv4.2: fix error return on memory allocation failure
NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
NFSv4.2: decode_read_plus_hole() needs to check the extent offset
NFSv4.2: decode_read_plus_data() must skip padding after data segment
NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
SUNRPC: When expanding the buffer, we may need grow the sparse pages
SUNRPC: Cleanup - constify a number of xdr_buf helpers
SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
SUNRPC: _copy_to/from_pages() now check for zero length
SUNRPC: Cleanup xdr_shrink_bufhead()
SUNRPC: Fix xdr_expand_hole()
SUNRPC: Fixes for xdr_align_data()
SUNRPC: _shift_data_left/right_pages should check the shift length
...
|
|
Pull ceph updates from Ilya Dryomov:
"The big ticket item here is support for msgr2 on-wire protocol, which
adds the option of full in-transit encryption using AES-GCM algorithm
(myself).
On top of that we have a series to avoid intermittent errors during
recovery with recover_session=clean and some MDS request encoding work
from Jeff, a cap handling fix and assorted observability improvements
from Luis and Xiubo and a good number of cleanups.
Luis also ran into a corner case with quotas which sadly means that we
are back to denying cross-quota-realm renames"
* tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits)
libceph: drop ceph_auth_{create,update}_authorizer()
libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1
libceph, ceph: implement msgr2.1 protocol (crc and secure modes)
libceph: introduce connection modes and ms_mode option
libceph, rbd: ignore addr->type while comparing in some cases
libceph, ceph: get and handle cluster maps with addrvecs
libceph: factor out finish_auth()
libceph: drop ac->ops->name field
libceph: amend cephx init_protocol() and build_request()
libceph, ceph: incorporate nautilus cephx changes
libceph: safer en/decoding of cephx requests and replies
libceph: more insight into ticket expiry and invalidation
libceph: move msgr1 protocol specific fields to its own struct
libceph: move msgr1 protocol implementation to its own file
libceph: separate msgr1 protocol implementation
libceph: export remaining protocol independent infrastructure
libceph: export zero_page
libceph: rename and export con->flags bits
libceph: rename and export con->state states
libceph: make con->state an int
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Allow unprivileged mounting in a user namespace.
For quite some time the security model of overlayfs has been that
operations on underlying layers shall be performed with the
privileges of the mounting task.
This way an unprvileged user cannot gain privileges by the act of
mounting an overlayfs instance. A full audit of all function calls
made by the overlayfs code has been performed to see whether they
conform to this model, and this branch contains some fixes in this
regard.
- Support running on copied filesystem images by optionally disabling
UUID verification.
- Bug fixes as well as documentation updates.
* tag 'ovl-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: unprivieged mounts
ovl: do not get metacopy for userxattr
ovl: do not fail because of O_NOATIME
ovl: do not fail when setting origin xattr
ovl: user xattr
ovl: simplify file splice
ovl: make ioctl() safe
ovl: check privs before decoding file handle
vfs: verify source area in vfs_dedupe_file_range_one()
vfs: move cap_convert_nscap() call into vfs_setxattr()
ovl: fix incorrect extent info in metacopy case
ovl: expand warning in ovl_d_real()
ovl: document lower modification caveats
ovl: warn about orphan metacopy
ovl: doc clarification
ovl: introduce new "uuid=off" option for inodes index feature
ovl: propagate ovl_fs to ovl_decode_real_fh and ovl_encode_real_fh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Improve performance of virtio-fs in mixed read/write workloads
- Try to revalidate cache before returning EEXIST on exclusive create
- Add a couple of miscellaneous bug fixes as well as some code cleanups
* tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix bad inode
fuse: support SB_NOSEC flag to improve write performance
fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request
fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2
fuse: setattr should set FATTR_KILL_SUIDGID
fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path
fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID
fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2
fuse: always revalidate if exclusive create
virtiofs: clean up error handling in virtio_fs_get_tree()
fuse: add fuse_sb_destroy() helper
fuse: simplify get_fuse_conn*()
fuse: get rid of fuse_mount refcount
virtiofs: simplify sb setup
virtiofs fix leak in setup
fuse: launder page should wait for page writeback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've made more work into per-file compression support.
For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
DECOMPRESS_FILE provides a way to compress and decompress the existing
normal files manually.
There is also a new mount option, compress_mode=fs|user, which can
control who compresses the data.
Chao also added a checksum feature with a mount option so that
we are able to detect any corrupted cluster.
In addition, Daniel contributed casefolding with encryption patch,
which will be used for Android devices.
Summary:
Enhancements:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fixes:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well"
* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
f2fs: compress: fix compression chksum
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
f2fs: fix race of pending_pages in decompression
f2fs: fix to account inline xattr correctly during recovery
f2fs: inline: fix wrong inline inode stat
f2fs: inline: correct comment in f2fs_recover_inline_data
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
f2fs: convert to F2FS_*_INO macro
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
f2fs: don't allow any writes on readonly mount
f2fs: avoid race condition for shrinker count
f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
f2fs: add compress_mode mount option
f2fs: Remove unnecessary unlikely()
f2fs: init dirty_secmap incorrectly
f2fs: remove buffer_head which has 32bits limit
f2fs: fix wrong block count instead of bytes
f2fs: use new conversion functions between blks and bytes
f2fs: rename logical_to_blk and blk_to_logical
f2fs: fix kbytes written stat for multi-device case
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, reiserfs, quota and writeback updates from Jan Kara:
- a couple of quota fixes (mostly for problems found by syzbot)
- several ext2 cleanups
- one fix for reiserfs crash on corrupted image
- a fix for spurious warning in writeback code
* tag 'for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: don't warn on an unregistered BDI in __mark_inode_dirty
fs: quota: fix array-index-out-of-bounds bug by passing correct argument to vfs_cleanup_quota_inode()
reiserfs: add check for an invalid ih_entry_count
ext2: Fix fall-through warnings for Clang
fs/ext2: Use ext2_put_page
docs: filesystems: Reduce ext2.rst to one top-level heading
quota: Sanity-check quota file headers on load
quota: Don't overflow quota file offsets
ext2: Remove unnecessary blank
fs/quota: update quota state flags scheme with project quota flags
|
|
syzkaller shows that packets can still be dequeued while taprio_destroy()
is running. Let sch_taprio use the reset() function to cancel the advance
timer and drop all skbs from the child qdiscs.
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae
Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The indirect block cleanup may cause control messages to be sent
if offloaded flows are present. However, by the time the flower app
cleanup callback is called txbufs are no longer available and attempts
to send control messages result in a NULL-pointer dereference in
nfp_ctrl_tx_one().
This problem may be resolved by moving the indirect block cleanup
to the stop callback, where txbufs are still available.
As suggested by Jakub Kicinski and Louis Peens.
Fixes: a1db217861f3 ("net: flow_offload: fix flow_indr_dev_unregister path")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the check for an unmap PF error is always going to be false
because intr_val is a 32 bit int and is being bit-mask checked against
1ULL << 32. Fix this by making intr_val a u64 to match the type at it
is copied from, namely npa_event_context->npa_af_rvu_ge.
Addresses-Coverity: ("Operands don't affect result")
Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A few fsnotify fixes from Amir fixing fallout from big fsnotify
overhaul a few months back and an improvement of defaults limiting
maximum number of inotify watches from Waiman"
* tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix events reported to watching parent and child
inotify: convert to handle_inode_event() interface
fsnotify: generalize handle_inode_event()
inotify: Increase default inotify.max_user_watches limit to 1048576
|
|
There is a spelling mistake in the Kconfig. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201216120020.13149-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return -EINVAL if we can't find the correct device. Currently it
returns success.
Fixes: 13159183ec7a ("qlcnic: 83xx base driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo Abeni says:
====================
mptcp: a bunch of assorted fixes
This series pulls a few fixes for the MPTCP datapath.
Most issues addressed here has been recently introduced
with the recent reworks, with the notable exception of
the first patch, which addresses an issue present since
the early days
====================
Link: https://lore.kernel.org/r/cover.1608114076.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sendmsg() needs to wait for memory, the pending data
is not updated. That causes a drift in forward memory allocation,
leading to stall and/or warnings at socket close time.
This change addresses the above issue moving the pending data
counter update inside the sendmsg() main loop.
Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When multiple subflows are active, we can receive a
window update on subflow with no write space available.
MPTCP will try to push frames on such subflow and will
fail. Pending frames will be pushed only after receiving
a window update on a subflow with some wspace available.
Overall the above could lead to suboptimal aggregate
bandwidth usage.
Instead, we should try to push pending frames as soon as
the subflow reaches both conditions mentioned above.
We can finally enable self-tests with asymmetric links,
as the above makes them finally pass.
Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP closes the subflows while holding the msk-level lock.
While acquiring the subflow socket lock we need to use the
correct nested annotation, or we can hit a lockdep splat
at runtime.
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently MPTCP is not propagating the security context
from the ingress request socket to newly created msk
at clone time.
Address the issue invoking the missing security helper.
Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field.
Defining an enum for such bit fields on 32-bit platform results in below
warning.
./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow]
^
./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’
MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20),
^~~
Use 32-bit friendly BIT_ULL macro.
Fixes: 2a2970891647 ("net/mlx5: Add sample offload hardware bits and structures")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 991fcb77f490 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.
The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases. And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.
However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement. It just won't
complain about an uninitialized variable any more.
So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random. We
have created a bridge to nowhere.
And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.
So depending on how the compiler has laid out the result, you might see
something like this:
drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()
and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.
IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).
Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.
This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).
A smart enough compiler that sees that we cover all the cases won't care.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To 2.30
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When remounting with the new mount API, we need to set
rsize and wsize to the previous values if they are not passed
in on the remount. Otherwise they get set to zero which breaks
xfstest 452 for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
|
|
Currently pmac32_defconfig with SMP=y doesn't build:
arch/powerpc/platforms/powermac/smp.c:
error: implicit declaration of function 'cleanup_cpu_mmu_context'
It would be nice for consistency if all platforms clear mm_cpumask and
flush TLBs on unplug, but the TLB invalidation bug described in commit
01b0f0eae081 ("powerpc/64s: Trim offlined CPUs from mm_cpumasks") only
applies to 64s and for now we only have the TLB flush code for that
platform.
So just add an empty version for 32-bit Book3S.
Fixes: 01b0f0eae081 ("powerpc/64s: Trim offlined CPUs from mm_cpumasks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Change log based on comments from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC OMAP GenPD updates from Arnd Bergmann:
"These are additional updates for the power domain support on OMAP,
moving to an implementation based on device tree information instead
of SoC specific code. This is the latest step in the ongoing process
for moving code out of arch/arm/mach-omap2.
I kept this separate from the other driver changes since it touches
code in multiple areas"
* tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: OMAP2+: Fix am4 only build after genpd changes
ARM: dts: Configure power domain for omap5 dss
ARM: dts: omap5: add remaining PRM instances
soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances
ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
ARM: dts: Configure interconnect target module for dra7 iva
ARM: dts: dra7: add remaining PRM instances
soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances
clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy platform data for omap4 gpmc
ARM: OMAP2+: Drop legacy platform data for omap4 iva
ARM: dts: Configure power domain for omap4 dsp
ARM: dts: Configure power domain for omap4 dss
ARM: dts: omap4: add remaining PRM instances
soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances
clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy remaining legacy platform data for am4
ARM: dts: Use simple-pm-bus for genpd for am4 l3
ARM: dts: Move am4 l3 noc to a separate node
ARM: dts: Use simple-pm-bus for genpd for am4 l4_per
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are updates for SoC specific code, mostly in the 32-bit
architecture:
- A rework for handling MMIO accesses in Renesas SoCs in a more
portable way
- Updates to SoC version detection in NXP i.MX SoCs.
- Smaller bug fixes for OMAP, Samsung, Marvell, Amlogic"
* tag 'arm-soc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: Kconfig: meson: drop pinctrl
ARM: mxs: Add serial number support for i.MX23, i.MX28 SoCs
MAINTAINERS: switch mvebu tree to kernel.org
MAINTAINERS: Add an entry for MikroTik CRS3xx 98DX3236 boards
ARM: shmobile: Stop using __raw_*() I/O accessors
ARM: shmobile: sh73a0: Remove obsolete static mapping
ARM: shmobile: sh73a0: Use ioremap() to map SMP registers
ARM: shmobile: sh73a0: Use ioremap() to map L2C registers
ARM: shmobile: r8a7779: Remove obsolete static mappings
ARM: shmobile: r8a7779: Use ioremap() to map SMP registers
ARM: shmobile: r8a7779: Use ioremap() to map INTC2 registers
ARM: shmobile: r8a7778: Introduce HPBREG_BASE
ARM: OMAP1: clock: Use IS_ERR_OR_NULL() to clean code
ARM: OMAP2+: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
ARM: OMAP2+: Remove redundant assignment to variable ret
ARM: OMAP2+: Fix kfree NULL pointer in omap2xxx_clkt_vps_init
ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
ARM: exynos: extend cpuidle support to P4 Note boards
ARM: imx: mach-imx6q: correctly identify i.MX6QP SoCs
ARM: imx: imx7ulp: Add a comment explaining the B2 silicon version
...
|
|
This patch cleared use_ack and use_map when dropping other suboptions to
fix the following syzkaller BUG:
[ 15.223006] BUG: unable to handle page fault for address: 0000000000223b10
[ 15.223700] #PF: supervisor read access in kernel mode
[ 15.224209] #PF: error_code(0x0000) - not-present page
[ 15.224724] PGD b8d5067 P4D b8d5067 PUD c0a5067 PMD 0
[ 15.225237] Oops: 0000 [#1] SMP
[ 15.225556] CPU: 0 PID: 7747 Comm: syz-executor Not tainted 5.10.0-rc6+ #24
[ 15.226281] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 15.227292] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.227816] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.229669] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293
[ 15.230188] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006
[ 15.230895] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700
[ 15.231593] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001
[ 15.232299] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0
[ 15.233007] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002
[ 15.233714] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000
[ 15.234509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.235081] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0
[ 15.235788] Call Trace:
[ 15.236042] skb_release_all+0x28/0x30
[ 15.236419] __kfree_skb+0x11/0x20
[ 15.236768] tcp_data_queue+0x270/0x1240
[ 15.237161] ? tcp_urg+0x50/0x2a0
[ 15.237496] tcp_rcv_established+0x39a/0x890
[ 15.237997] ? mark_held_locks+0x49/0x70
[ 15.238467] tcp_v4_do_rcv+0xb9/0x270
[ 15.238915] __release_sock+0x8a/0x160
[ 15.239365] release_sock+0x32/0xd0
[ 15.239793] __inet_stream_connect+0x1d2/0x400
[ 15.240313] ? do_wait_intr_irq+0x80/0x80
[ 15.240791] inet_stream_connect+0x36/0x50
[ 15.241275] mptcp_stream_connect+0x69/0x1b0
[ 15.241787] __sys_connect+0x122/0x140
[ 15.242236] ? syscall_enter_from_user_mode+0x17/0x50
[ 15.242836] ? lockdep_hardirqs_on_prepare+0xd4/0x170
[ 15.243436] __x64_sys_connect+0x1a/0x20
[ 15.243924] do_syscall_64+0x33/0x40
[ 15.244313] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 15.244821] RIP: 0033:0x7f65d946e469
[ 15.245183] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
[ 15.247019] RSP: 002b:00007f65d9b5eda8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[ 15.247770] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007f65d946e469
[ 15.248471] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005
[ 15.249205] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000
[ 15.249908] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c
[ 15.250603] R13: 00007fffe8a25cef R14: 00007f65d9b3f000 R15: 0000000000000003
[ 15.251312] Modules linked in:
[ 15.251626] CR2: 0000000000223b10
[ 15.251965] BUG: kernel NULL pointer dereference, address: 0000000000000048
[ 15.252005] ---[ end trace f5c51fe19123c773 ]---
[ 15.252822] #PF: supervisor read access in kernel mode
[ 15.252823] #PF: error_code(0x0000) - not-present page
[ 15.252825] PGD c6c6067 P4D c6c6067 PUD c0d8067
[ 15.253294] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.253910] PMD 0
[ 15.253914] Oops: 0000 [#2] SMP
[ 15.253917] CPU: 1 PID: 7746 Comm: syz-executor Tainted: G D 5.10.0-rc6+ #24
[ 15.253920] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 15.254435] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.254899] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.254902] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.254905] RSP: 0018:ffffc900019bfc08 EFLAGS: 00010293
[ 15.255376] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293
[ 15.255580]
[ 15.255583] RAX: ffff888004a7ac80 RBX: 0000000000000040 RCX: 0000000000000000
[ 15.255912]
[ 15.256724] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6ddd00
[ 15.257620] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006
[ 15.259817] RBP: ffff88800e9006c0 R08: 0000000000000000 R09: 0000000000000000
[ 15.259818] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88800e9006f0
[ 15.259820] R13: 0000000000000000 R14: ffff88807f6ddd00 R15: 0000000000000002
[ 15.259822] FS: 00007fae4a60a700(0000) GS:ffff88807c500000(0000) knlGS:0000000000000000
[ 15.259826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.260296] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700
[ 15.262514] CR2: 0000000000000048 CR3: 000000000b89c000 CR4: 00000000000006e0
[ 15.262515] Call Trace:
[ 15.262519] skb_release_all+0x28/0x30
[ 15.262523] __kfree_skb+0x11/0x20
[ 15.263054] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001
[ 15.263680] tcp_data_queue+0x270/0x1240
[ 15.263843] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0
[ 15.264693] ? tcp_urg+0x50/0x2a0
[ 15.264856] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002
[ 15.265720] tcp_rcv_established+0x39a/0x890
[ 15.266438] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000
[ 15.267283] ? __schedule+0x3fa/0x880
[ 15.267287] tcp_v4_do_rcv+0xb9/0x270
[ 15.267290] __release_sock+0x8a/0x160
[ 15.268049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.268788] release_sock+0x32/0xd0
[ 15.268791] __inet_stream_connect+0x1d2/0x400
[ 15.268795] ? do_wait_intr_irq+0x80/0x80
[ 15.269593] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0
[ 15.270246] inet_stream_connect+0x36/0x50
[ 15.270250] mptcp_stream_connect+0x69/0x1b0
[ 15.270253] __sys_connect+0x122/0x140
[ 15.271097] Kernel panic - not syncing: Fatal exception
[ 15.271820] ? syscall_enter_from_user_mode+0x17/0x50
[ 15.283542] ? lockdep_hardirqs_on_prepare+0xd4/0x170
[ 15.284275] __x64_sys_connect+0x1a/0x20
[ 15.284853] do_syscall_64+0x33/0x40
[ 15.285369] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 15.286105] RIP: 0033:0x7fae49f19469
[ 15.286638] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
[ 15.289295] RSP: 002b:00007fae4a609da8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[ 15.290375] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007fae49f19469
[ 15.291403] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005
[ 15.292437] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000
[ 15.293456] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c
[ 15.294473] R13: 00007fff0004b6bf R14: 00007fae4a5ea000 R15: 0000000000000003
[ 15.295492] Modules linked in:
[ 15.295944] CR2: 0000000000000048
[ 15.296567] Kernel Offset: disabled
[ 15.296941] ---[ end Kernel panic - not syncing: Fatal exception ]---
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 84dfe3677a6f (mptcp: send out dedicated ADD_ADDR packet)
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/ccca4e8f01457a1b495c5d612ed16c5f7a585706.1608010058.git.geliangtang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
