| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"During the development period of v6.8 kernel, it became evident that
there was a lack of helper utilities to trace the initial state of
bus, while investigating certain PHYs compliant with different
versions of IEEE 1394 specification.
This series of changes includes the addition of tracepoints events,
provided by 'firewire' subsystem. These events enable tracing of how
firewire core functions during bus reset and asynchronous
communication over IEEE 1394 bus.
When implementing the tracepoints events, it was found that the
existing serialization and deserialization helpers for several types
of asynchronous packets are scattered across both firewire-core and
firewire-ohci kernel modules. A set of inline functions is newly added
to address it, along with some KUnit tests, serving as the foundation
for the tracepoints events. This renders the dispersed code obsolete.
The remaining changes constitute the final steps in phasing out the
usage of deprecated PCI MSI APIs, in continuation from the previous
version"
* tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits)
firewire: obsolete usage of *-objs in Makefile for KUnit test
firewire: core: remove flag and width from u64 formats of tracepoints events
firewire: core: fix type of timestamp for async_inbound_template tracepoints events
firewire: core: add tracepoint event for handling bus reset
Revert "firewire: core: option to log bus reset initiation"
firewire: core: add tracepoints events for initiating bus reset
firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter
firewire: ohci: add bus-reset event for initial set of handled irq
firewire: core: add tracepoints event for asynchronous inbound phy packet
firewire: core/cdev: add tracepoints events for asynchronous phy packet
firewire: core: add tracepoints events for asynchronous outbound response
firewire: core: add tracepoint event for asynchronous inbound request
firewire: core: add tracepoints event for asynchronous inbound response
firewire: core: add tracepoints events for asynchronous outbound request
firewire: core: add support for Linux kernel tracepoints
firewire: core: replace local macros with common inline functions for isochronous packet header
firewire: core: add common macro to serialize/deserialize isochronous packet header
firewire: core: obsolete tcode check macros with inline functions
firewire: ohci: replace hard-coded values with common macros
firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add a dm-crypt optional "high_priority" flag that enables the crypt
workqueues to use WQ_HIGHPRI.
- Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow
for improved visibility and controls over IO and crypt workqueues.
- Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE.
This limit isn't needed given that the block core provides late bio
splitting if bio exceeds underlying limits (e.g. max_segment_size).
- Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use
WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND.
- Fix various issues with dm-delay target (ranging from a resource
teardown fix, a fix for hung task when using kthread mode, and other
improvements that followed from code inspection).
* tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-delay: remove timer_lock
dm-delay: change locking to avoid contention
dm-delay: fix max_delay calculations
dm-delay: fix hung task introduced by kthread mode
dm-delay: fix workqueue delay_timer race
dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue
dm: use queue_limits_set
dm-crypt: stop constraining max_segment_size to PAGE_SIZE
dm-crypt: export sysfs of all workqueues
dm-crypt: add the optional "high_priority" flag
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the bindings for the imx-pata and ahci-da850 drivers to DT
schemas (from Animesh)
- Correct the code to handle HAS_IOPORT dependencies and conditionally
compile drivers as needed (from Niklas)
- Correct the legacy_exit() function in the pata_legacy driver to
properly handle cleanups on driver exit (from Sergey)
- Small code simplification removing the ata_exec_internal_sg()
function and folding it into its only caller (from me)
* tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_legacy: make legacy_exit() work again
ata: libata-core: Remove ata_exec_internal_sg()
ata: add HAS_IOPORT dependencies
dt-bindings: ata: ahci-da850: Convert to dtschema
dt-bindings: ata: imx-pata: Convert to dtschema
|
|
Pull fsverity update from Eric Biggers:
"Fix a false positive kmemleak warning"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: use register_sysctl_init() to avoid kmemleak warning
|
|
Pull fscrypt update from Eric Biggers:
"Improve the performance of opening unencrypted files on filesystems
that support fscrypt"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: try to avoid refing parent dentry in fscrypt_file_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
"Fix out-of-bounds fsid access.
Small fix to quiet warnings from string fortification helpers,
suggested by Arnd Bergmann"
* tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: fix out-of-bounds fsid access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Properly fix the glock shrinker this time: it broke in commit "gfs2:
Make glock lru list scanning safer" and commit "gfs2: fix glock
shrinker ref issues" wasn't actually enough to fix it
- On unmount, keep glocks around long enough that no more dlm callbacks
can occur on them
- Some more folio conversion patches from Matthew Wilcox
- Lots of other smaller fixes and cleanups
* tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits)
gfs2: make timeout values more explicit
gfs2: Convert gfs2_aspace_writepage() to use a folio
gfs2: Add a migrate_folio operation for journalled files
gfs2: Simplify gfs2_read_super
gfs2: Convert gfs2_page_mkwrite() to use a folio
gfs2: gfs2_freeze_unlock cleanup
gfs2: Remove and replace gfs2_glock_queue_work
gfs2: do_xmote fixes
gfs2: finish_xmote cleanup
gfs2: Unlock fewer glocks on unmount
gfs2: Fix potential glock use-after-free on unmount
gfs2: Remove ill-placed consistency check
gfs2: Fix lru_count accounting
gfs2: Fix "Make glock lru list scanning safer"
Revert "gfs2: fix glock shrinker ref issues"
gfs2: Fix "ignore unlock failures after withdraw"
gfs2: Get rid of unnecessary test_and_set_bit
gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru
gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async
gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes some small fixes, and some big internal changes:
- Fix a long standing race between the unlock callback for the last
lkb struct, and removing the rsb that became unused after the final
unlock. This could lead different nodes to inconsistent info about
the rsb master node.
- Remove unnecessary refcounting on callback structs, returning to
the way things were done in the past.
- Do message processing in softirq context. This allows dlm messages
to be cleared more quickly and efficiently, reducing long lists of
incomplete requests. A future change to run callbacks directly from
this context will make this more effective.
- The softirq message processing involved a number of patches
changing mutexes to spinlocks and rwlocks, and a fair amount of
code re-org in preparation.
- Use an rhashtable for rsb structs, rather than our old internal
hash table implementation. This also required some re-org of lists
and locks preparation for the change.
- Drop the dlm_scand kthread, and use timers to clear unused rsb
structs. Scanning all rsb's periodically was a lot of wasted work.
- Fix recent regression in logic for copying LVB data in user space
lock requests"
* tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits)
dlm: return -ENOMEM if ls_recover_buf fails
dlm: fix sleep in atomic context
dlm: use rwlock for lkbidr
dlm: use rwlock for rsb hash table
dlm: drop dlm_scand kthread and use timers
dlm: do not use ref counts for rsb in the toss state
dlm: switch to use rhashtable for rsbs
dlm: add rsb lists for iteration
dlm: merge toss and keep hash table lists into one list
dlm: change to single hashtable lock
dlm: increment ls_count for dlm_scand
dlm: do message processing in softirq context
dlm: use spin_lock_bh for message processing
dlm: remove schedule in receive path
dlm: convert ls_recv_active from rw_semaphore to rwlock
dlm: avoid blocking receive at the end of recovery
dlm: convert res_lock to spinlock
dlm: convert ls_waiters_mutex to spinlock
dlm: drop mutex use in waiters recovery
dlm: add new struct to save position in dlm_copy_master_names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This update brings a few minor performance improvements, otherwise
there's a lot of refactoring, cleanups and other sort of not user
visible changes.
Performance improvements:
- inline b-tree locking functions, improvement in metadata-heavy
changes
- relax locking on a range that's being reflinked, allows read
operations to run in parallel
- speed up NOCOW write checks (throughput +9% on a sample test)
- extent locking ranges have been reduced in several places, namely
around delayed ref processing
Core:
- more page to folio conversions:
- relocation
- send
- compression
- inline extent handling
- super block write and wait
- extent_map structure optimizations:
- reduced structure size
- code simplifications
- add shrinker for allocated objects, the numbers can go high and
could exhaust memory on smaller systems (reported) as they may
not get an opportunity to be freed fast enough
- extent locking optimizations:
- reduce locking ranges where it does not seem to be necessary and
are safe due to other means of synchronization
- potential improvements due to lower contention,
allocation/freeing and state management operations of extent
state tracking structures
- delayed ref cleanups and simplifications
- updated trace points
- improved error handling, warnings and assertions
- cleanups and refactoring, unification of error handling paths"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits)
btrfs: qgroup: fix initialization of auto inherit array
btrfs: count super block write errors in device instead of tracking folio error state
btrfs: use the folio iterator in btrfs_end_super_write()
btrfs: convert super block writes to folio in write_dev_supers()
btrfs: convert super block writes to folio in wait_dev_supers()
bio: Export bio_add_folio_nofail to modules
btrfs: remove duplicate included header from fs.h
btrfs: add a cached state to extent_clear_unlock_delalloc
btrfs: push extent lock down in submit_one_async_extent
btrfs: push lock_extent down in cow_file_range()
btrfs: move can_cow_file_range_inline() outside of the extent lock
btrfs: push lock_extent into cow_file_range_inline
btrfs: push extent lock into cow_file_range
btrfs: push extent lock into run_delalloc_cow
btrfs: remove unlock_extent from run_delalloc_compressed
btrfs: push extent lock down in run_delalloc_nocow
btrfs: adjust while loop condition in run_delalloc_nocow
btrfs: push extent lock into run_delalloc_nocow
btrfs: push the extent lock into btrfs_run_delalloc_range
btrfs: lock extent when doing inline extent in compression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The LZ4 global buffer count is now configurable instead of the
previous per-CPU buffers, which is useful for bare metals with
hundreds of CPUs. A reserved buffer pool for LZ4 decompression can
also be enabled to minimize the tail allocation latencies under the
low memory scenarios with heavy memory pressure.
In addition, Zstandard algorithm is now supported as an alternative
since it has been requested by users for a while.
There are some random cleanups as usual.
Summary:
- Make LZ4 global buffers configurable instead of per-CPU buffers
- Add a reserved buffer pool for LZ4 decompression for lower latencies
- Support Zstandard compression algorithm as an alternative
- Derive fsid from on-disk UUID for .statfs() if possible
- Minor cleanups"
* tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: Zstandard compression support
erofs: clean up z_erofs_load_full_lcluster()
erofs: derive fsid from on-disk UUID for .statfs() if possible
erofs: add a reserved buffer pool for lz4 decompression
erofs: do not use pagepool in z_erofs_gbuf_growsize()
erofs: rename per-CPU buffers to global buffer pool and make it configurable
erofs: rename utils.c to zutil.c
|
|
Write through mode is for cache=none, not for default (when
caching is allowed if we have a lease). Some tests were running
much, much more slowly as a result of disabling caching of
writes by default.
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Firmware loading from host support in intel-ish driver, needed to
support Lunar Lake and later (Zhang Lixu)
- updates to HID-BPF infrastructure, with some of the specific fixes
(e.g. rdesc fixups) abstracted into separate BPF programs for
consumption from libevdev/udev-hid-bpf (Benjamin Tissoires)
- support for Deck IMU in hid-steam (Max Maisel)
- fixes for better support of 3rd party playstation DS4 controllers
(Max Staudt)
- support for missing mappings and codes from HUT 1.5 in hid-debug
(Thomas Kuehne)
- initial support for ROG Ally and ROG X13 devices (Luke D. Jones)
- full support for WinWing Orion2 (Ivan Gorinov)
* tag 'hid-for-linus-2024051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (74 commits)
selftests/hid: skip tests with HID-BPF if udev-hid-bpf is not installed
selftests/hid: add tests for the Raptor Mach 2 joystick
selftests/hid: move the gamepads definitions in the test file
selftests/hid: import base_gamepad.py from hid-tools
selftests/hid: add Huion Kamvas Pro 19 tests
selftests/hid: tablets: also check for XP-Pen offset correction
selftests/hid: tablets: add a couple of XP-PEN tablets
selftests/hid: tablets: reduce the number of pen state
selftests/hid: add support for HID-BPF pre-loading before starting a test
selftests/hid: import base_device.py from hid-tools
HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2
HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19
HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over Bluetooth
HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPen
HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouse
HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse
HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16
HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24
HID: do not assume HAT Switch logical max < 8
HID: amd_sfh: Use amd_get_c2p_val() to read C2P register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart for the normal updates for dt bindings, cleanups and support for
new device variants to existing drivers this completes the conversion
to pwmchip_alloc() which was started in the v6.9 development cycle.
Using pwmchip_alloc() is a precondition to the character device
support which allows easier and faster access to PWM devices. However
there are some issues I want to clean up before including it in
mainline, so this isn't contained here despite it was in next for some
time.
Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George
Stark, Jerome Brunet and Varshini Rajendran for their contributions.
Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David
Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A.
R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch
review"
* tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits)
pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0
dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice
dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice
dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice
dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice
dt-bindings: pwm: bcm2835: Do not require pwm-cells twice
pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating
pwm: meson: Add check for error from clk_round_rate()
pwm: meson: Drop unneeded check in .get_state()
dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC
pwm: meson: Add generic compatible for meson8 to sm1
pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get()
pwm: bcm2835: Introduce a local variable for &pdev->dev
pwm: stm32: Calculate prescaler with a division instead of a loop
pwm: stm32: Fix for settings using period > UINT32_MAX
pwm: stm32: Improve precision of calculation in .apply()
pwm: stm32: Add error messages in .probe()'s error paths
pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata()
pwm: Don't check pointer for being non-NULL after use
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux
Pull hte/timestamp update from Dipen Patel:
- Improve hte-test driver platform remove callback by replacing it with
the remove_new which returns void instead
* tag 'for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
hte: tegra-194: Convert to platform remove callback returning void
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Infineon XDP710
- EC Chip driver for Lenovo ThinkStation motherboards
- Analog Devices ADP1050
Improved support for existing drivers:
- emc1403: Convert to with_info API; Support for EMC1428 and EMC1438
- nzxt-kraken3: Support for NZXT Kraken 2023
- aquacomputer_d5next: Support for Octo flow sensors
- pmbus/adm1275: Support for ADM1281
- dell-smm: Supportt for Precision 7540 and G5 5505
Other notable cleanup:
- max6639: Use regmap
- Remove unused structure fields from multiple drivers
- Drop explicit initialization of struct i2c_device_id::driver_data
to zero
- Improve configuration mode handling in it87 driver
- jc42: Drop support for I2C_CLASS_SPD
- Various conversions to devicetree schema
- Add HAS_IOPORT dependencies as needed
Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"
* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
hwmon: (nzxt-kraken3) Bail out for unsupported device variants
hwmon: (emc1403) Add support for EMC1428 and EMC1438.
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
hwmon: (emc1403) Add support for conversion interval configuration
hwmon: (emc1403) Support 11 bit accuracy
hwmon: (emc1403) Convert to with_info API
hwmon: (max6639) Use regmap
hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
hwmon: (stts751) Remove an unused field in struct stts751_priv
hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
hwmon: (max31790) revise the scale to write pwm
hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
hwmon: (nzxt-kraken3) Decouple device names from kinds
hwmon: (it87) Remove tests nolonger required
hwmon: (it87) Test for chipset before entering configuration mode
hwmon: (it87) Do not enter configuration mode for some chiptypes
hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
hwmon: (pmbus) Add support for Infineon XDP710
dt-bindings: hwmon: Add infineon xdp710 driver bindings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Other than a few cleanups the changes here are all in the KUnit tests,
Richard Fitzgerald sent some bug fixes during the v6.9 cycle and while
adding test coverage for the issues fixed did some fairly substantial
improvements, both cleaning up the framework and building out the
coverage"
* tag 'regmap-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Reorder fields in 'struct regmap_config' to save some memory
regmap: kunit: Fix an NULL vs IS_ERR() check
regmap: spi: Add missing MODULE_DESCRIPTION()
regmap: Drop capitalisation in MODULE_DESCRIPTION()
regmap: kunit: Add test cases for regmap_read_bypassed()
regmap: kunit: Add cache-drop test with multiple cache blocks
regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc
regmap: kunit: Use a KUnit action to call regmap_exit()
regmap: kunit: Add more cache-sync tests
regmap: kunit: Add more cache-drop tests
regmap: kunit: Run non-sparse cache tests at non-zero register addresses
regmap: kunit: Run sparse cache tests at non-zero register addresses
regmap: kunit: Introduce struct for test case parameters
regmap: kunit: Create a struct device for the regmap
regmap: kunit: Fix warnings of implicit casts to __le16 and __be16
regmap: maple: Remove second semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates coming from the 20240322 release upstream, an
ACPI DPTF driver update adding new platform support for it, some new
quirks and some assorted fixes and cleanups.
Specifics:
- Add EINJ CXL error types to actbl1.h (Ben Cheatham)
- Add support for RAS2 table to ACPICA (Shiju Jose)
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King)
- Fix spelling and typos in ACPICA (Saket Dumbre)
- Modify ACPI_OBJECT_COMMON_HEADER (lijun)
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu)
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam)
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin)
- Mark new ACPICA release 20240322 (Saket Dumbre)
- Add support for the AEST V2 table to ACPICA (Ruidong Tian)
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann)
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf)
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski)
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko)
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko)
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki)
- Rework the handling of the NHLT table to simplify and clarify it
and drop some obsolete pieces (Cezary Rojewski)
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV,
TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter
Schafranek, Tamim Khan, Christoffer Sandberg)
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus)
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling
code and simplify it on top of that (Robert Richter)
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko)
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko)
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede)
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan)
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar)
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König)
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts)
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu)
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)"
* tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
ACPI/NUMA: Remove architecture dependent remainings
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
ACPICA: AEST: Add support for the AEST V2 table
ACPI: tools: pfrut: Print the update_cap field during capability query
ACPI: property: Add reference to UEFI DSD Guide
Documentation: firmware-guide: ACPI: Fix namespace typo
PNP: add HAS_IOPORT dependencies
ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
ACPICA: Update acpixf.h for new ACPICA release 20240322
ACPICA: events/evgpeinit: don't forget to increment registered GPE count
ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
ACPICA: SRAT: Add RISC-V RINTC affinity structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The most significant part of this is a rework of thermal governors,
including a redesign of the thermal governor interface and changes to
make some of them take trip point hysteresis into account properly, as
well as some related cleanups of the thermal governors and thermal
core.
The above is based on preliminary changes refactoring thermal data
structures and moving the definitions of some of them into the thermal
core which also ensure that trip point crossing notifications will be
sent to user space via netlink and recorded in the debug statistics in
temperature order.
In addition, netlink bind/unbind notifications are added to the
thermal core and the Intel HFI driver is modified to use them to avoid
sending netlink messages until there are subscribers.
Apart from that, multiple thermal drivers are updated which includes
new hardware support (MediaTek MT8188 and MT8186, Amlogic A1 thermal
sensor, Loongson-2K2000, Lmh QCM2290), fixes, cleanups and
documentation updates, and the recently added thermal debug code is
fixed and cleaned up.
Specifics:
- Redesign the thermal governor interface to allow the governors to
work in a more straightforward way (Rafael Wysocki)
- Make thermal governors take the current trip point thresholds into
account in their computations which allows trip hysteresis to be
observed more accurately (Rafael Wysocki)
- Make the thermal core manage passive polling for thermal zones and
remove passive polling management from thermal governors (Rafael
Wysocki)
- Refactor trip point representation and move the definition of
thermal governor and thermal zone device structures to the thermal
core (Rafael Wysocki)
- Sort trip point crossing notifications and debug recording of trip
point crossing events by temperature (Rafael Wysocki)
- Improve the handling of cooling device states and thermal
mitigation episodes in progress in the thermal debug code (Rafael
Wysocki)
- Avoid excessive updates of trip point statistics and clean up the
printing of thermal mitigation episode information (Rafael Wysocki)
- Clean up thermal governors and thermal core (Rafael Wysocki)
- Allow thermal drivers to register notifiers that will be invoked on
netlink events like BIND and UNBIND, so that they can adjust their
activity depending on whether or not there are any subscribers of
netlink messages coming from them, and make the Intel HFI driver
use this mechanism (Stanislaw Gruszka)
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and
allow it to process more data in one go (Ricardo Neri)
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas
Pandruvada)
- Replace deprecated strncpy() with strscpy() in the int340x_thermal
driver (Justin Stitt)
- Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer
dereference in the lmh driver when the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to
support it correctly (Hsin-Te Yuan)
- Fix a NULL pointer dereference in the tsens driver when the
function compute_intercept_slope() is called with a NULL parameter
(Aleksandr Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fix up calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)"
* tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
thermal: intel: Add missing module description
thermal: core: Move passive polling management to the core
thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid
thermal: trip: Add missing empty code line
thermal/debugfs: Avoid printing zero duration for mitigation events in progress
thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()
thermal/debugfs: Create records for cdev states as they get used
thermal: core: Introduce thermal_governor_trip_crossed()
thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats
thermal/debugfs: Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
thermal/debugfs: Clean up thermal_debug_update_temp()
thermal/debugfs: Avoid excessive updates of trip point statistics
thermal: core: Relocate critical and hot trip handling
thermal: core: Drop the .throttle() governor callback
thermal: gov_user_space: Use .trip_crossed() instead of .throttle()
thermal: gov_fair_share: Eliminate unnecessary integer divisions
...
|
|
This closely resembles helpers added for the global cgroup_rstat_lock in
commit fc29e04ae1ad ("cgroup/rstat: add cgroup_rstat_lock helpers and
tracepoints"). This is for the per CPU lock cgroup_rstat_cpu_lock.
Based on production workloads, we observe the fast-path "update" function
cgroup_rstat_updated() is invoked around 3 million times per sec, while the
"flush" function cgroup_rstat_flush_locked(), walking each possible CPU,
can see periodic spikes of 700 invocations/sec.
For this reason, the tracepoints are split into normal and fastpath
versions for this per-CPU lock. Making it feasible for production to
continuously monitor the non-fastpath tracepoint to detect lock contention
issues. The reason for monitoring is that lock disables IRQs which can
disturb e.g. softirq processing on the local CPUs involved. When the
global cgroup_rstat_lock stops disabling IRQs (e.g converted to a mutex),
this per CPU lock becomes the next bottleneck that can introduce latency
variations.
A practical bpftrace script for monitoring contention latency:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_cpu_lock_contended {
@start[tid]=nsecs; @cnt[probe]=count()}
tracepoint:cgroup:cgroup_rstat_cpu_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}
@cnt[probe]=count()}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); print(@cnt); clear(@cnt);}'
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- make framework and tests reporting KTAP compliant
- make ktap_helpers and power_supply test POSIX compliant
- add ksft_exit_fail_perror() to include errono in string form
- avoid clang reporting false positive static analysis errors about
functions that exit and never return. ksft_exit* functions are marked
__noreturn to address this problem
- add mechanism for reporting a KSFT_ result code
- fix build warnings related missing headers and unused variables
- fix clang build failures
- cleanups to resctrl test
- add host arch for LLVM builds
* tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (44 commits)
selftests/sgx: Include KHDR_INCLUDES in Makefile
selftests: Compile kselftest headers with -D_GNU_SOURCE
selftests/resctrl: fix clang build warnings related to abs(), labs() calls
selftests/ftrace: Fix checkbashisms errors
selftests/ftrace: Fix BTFARG testcase to check fprobe is enabled correctly
selftests/capabilities: fix warn_unused_result build warnings
selftests: filesystems: add missing stddef header
selftests: kselftest_deps: fix l5_test() empty variable
selftests: default to host arch for LLVM builds
selftests/resctrl: fix clang build failure: use LOCAL_HDRS
selftests/binderfs: use the Makefile's rules, not Make's implicit rules
Documentation: kselftest: fix codeblock
selftests: kselftest: Make ksft_exit functions return void instead of int
selftests: x86: ksft_exit_pass() does not return
selftests: timers: ksft_exit functions do not return
selftests: sync: ksft_exit_pass() does not return
selftests/resctrl: ksft_exit_skip() does not return
selftests: pidfd: ksft_exit functions do not return
selftests/mm: ksft_exit functions do not return
selftests: membarrier: ksft_exit_pass() does not return
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix race condition in try-catch completion
- change __kunit_test_suites_init() to exit early if there is
nothing to test
- change string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER
- move fault tests behind KUNIT_FAULT_TEST Kconfig option
- kthread test fixes and improvements
- iov_iter test fixes
* tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: bail out early in __kunit_test_suites_init() if there are no suites to test
kunit: string-stream-test: use KUNIT_DEFINE_ACTION_WRAPPER
kunit: test: Move fault tests behind KUNIT_FAULT_TEST Kconfig option
kunit: unregister the device on error
kunit: Fix race condition in try-catch completion
kunit: Add tests for fault
kunit: Print last test location on fault
kunit: Fix KUNIT_SUCCESS() calls in iov_iter tests
kunit: Handle test faults
kunit: Fix timeout message
kunit: Fix kthread reference
kunit: Handle thread creation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
- add support for uname(2)
- remove open-coded strnlen()
- export strlen()
- add tests for strlcat() and strlcpy()
- fix memory error in realloc()
- fix strlcat() and strlcpy() return code and size usage
* tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools/nolibc: add support for uname(2)
tools/nolibc/string: remove open-coded strnlen()
selftests/nolibc: Add tests for strlcat() and strlcpy()
tools/nolibc: Fix strlcpy() return code and size usage
tools/nolibc: Fix strlcat() return code and size usage
tools/nolibc/string: export strlen()
tools/nolibc/stdlib: fix memory error in realloc()
|
|
Pull OpenRISC updates from Stafford Horne:
"A few cleanups and fixups from me:
- Add a few missing relocations to fix module loading
- Cleanup FPU state save and restore to be more efficient
- Cleanups to traps handling and logging
- Fix issue with poweroff being broken after recent power driver
refactorings"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Move FPU state out of pt_regs
openrisc: Add FPU config
openrisc: traps: Don't send signals to kernel mode threads
openrisc: traps: Remove calls to show_registers before die
openrisc: traps: Convert printks to pr_<level> macros
openrisc: Add support for more module relocations
openrisc: Define openrisc relocation types
openrisc: Use do_kernel_power_off()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"The majority of improvements are coming from Geert Uytterhoeven who
took the time to fix a total of 30 cases of "-Wmissing-prototypes"
compiler warnings, either by adding a missing header include, defining
the missing forward declarations or making the functions in question
static.
In the case of several DMA functions, the fix was to actually just
remove them as they were added but never used. Another one of these
warnings was eliminated by removing the left-over sh5 cache handling
support, a change that was suggested by Yoshinori Sato and, finally,
the last of these warnings was fixed by guarding the function
setup_profiling_timer() with CONFIG_PROFILING.
While at it, Geert also removed two unneeded casts to kprobe_opcode_t
in the kprobes code.
Another change was contributed by Guenter Roeck to fix errors that
were reported during checksum unit tests. The fix actually reverts the
older change cadc4e1a2b4d ("sh: Handle calling csum_partial with
misaligned data") which turned to be incorrect. It remains to be
investigated whether there is a better way to handle misaligned data
in csum_partial().
A small fix contributed by Krzysztof Kozlowski drops the incorrect SPI
controller spi-max-frequency property in the device tree source file
for the J2 device platform while Uwe Kleine-König converted the
push-switch driver to have its callback function return void, a change
that is currently being applied to all drivers throughout the kernel
in order to avoid resource leaks.
Last but not least, Artur Rojek has fixed the IOPORT base address for
the Sega Dreamcast platform which allows the Linux kernel to be
successfully booted on this once popular video game console for the
first time since a long time ago"
* tag 'sh-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: (35 commits)
sh: setup: Add missing forward declaration for sh_fdt_init()
sh: smp: Protect setup_profiling_timer() by CONFIG_PROFILING
sh: of-generic: Add missing #include <asm/clock.h>
sh: dreamcast: Fix GAPS PCI bridge addressing
sh: boot: Add proper forward declarations
sh: boot: Remove sh5 cache handling
Revert "sh: Handle calling csum_partial with misaligned data"
sh: j2: Drop incorrect SPI controller spi-max-frequency property
sh: push-switch: Convert to platform remove callback returning void
sh: sh7785lcr: Make init_sh7785lcr_IRQ() static
sh: sh7757: Add missing #include <asm/mmzone.h>
sh: sh7757lcr: Make init_sh7757lcr_IRQ() static
sh: mach-sh03: Make sh03_rtc_settimeofday() static
sh: mach-highlander: Add missing #include <mach/highlander.h>
sh: traps: Make is_dsp_inst() static
sh: cache: Move forward declarations to <asm/cacheflush.h>
sh: dma: Remove unused functionality
sh: dwarf: Make dwarf_lookup_fde() static
sh: kprobes: Remove unneeded kprobe_opcode_t casts
sh: kprobes: Make trampoline_probe_handler() static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The most interesting parts are probably the mm changes from Ryan which
optimise the creation of the linear mapping at boot and (separately)
implement write-protect support for userfaultfd.
Outside of our usual directories, the Kbuild-related changes under
scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts
have been acked by Rafael and the addition of cpumask_any_and_but()
has been acked by Yury.
ACPI:
- Support for the Firmware ACPI Control Structure (FACS) signature
feature which is used to reboot out of hibernation on some systems
Kbuild:
- Support for building Flat Image Tree (FIT) images, where the kernel
Image is compressed alongside a set of devicetree blobs
Memory management:
- Optimisation of our early page-table manipulation for creation of
the linear mapping
- Support for userfaultfd write protection, which brings along some
nice cleanups to our handling of invalid but present ptes
- Extend our use of range TLBI invalidation at EL1
Perf and PMUs:
- Ensure that the 'pmu->parent' pointer is correctly initialised by
PMU drivers
- Avoid allocating 'cpumask_t' types on the stack in some PMU drivers
- Fix parsing of the CPU PMU "version" field in assembly code, as it
doesn't follow the usual architectural rules
- Add best-effort unwinding support for USER_STACKTRACE
- Minor driver fixes and cleanups
Selftests:
- Minor cleanups to the arm64 selftests (missing NULL check, unused
variable)
Miscellaneous:
- Add a command-line alias for disabling 32-bit application support
- Add part number for Neoverse-V2 CPUs
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2
arm64/mm: Add uffd write-protect support
arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
arm64/mm: Remove PTE_PROT_NONE bit
arm64/mm: generalize PMD_PRESENT_INVALID for all levels
arm64: simplify arch_static_branch/_jump function
arm64: Add USER_STACKTRACE support
arm64: Add the arm64.no32bit_el0 command line option
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
kselftest: arm64: Add a null pointer check
arm64: defer clearing DAIF.D
arm64: assembler: update stale comment for disable_step_tsk
arm64/sysreg: Update PIE permission encodings
kselftest/arm64: Remove unused parameters in abi test
perf/arm-spe: Assign parents for event_source device
perf/arm-smmuv3: Assign parents for event_source device
perf/arm-dsu: Assign parents for event_source device
perf/arm-dmc620: Assign parents for event_source device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Fix invalid context sleep and reboot hang on Mac
- Fix spinlock race in kernel thread creation
- Miscellaneous fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.9-rc1
m68k: Move ARCH_HAS_CPU_CACHE_ALIASING
m68k: mac: Fix reboot hang on Mac IIci
m68k: Fix spinlock race in kernel thread creation
m68k: Let GENERIC_IOMAP depend on HAS_IOPORT
m68k: amiga: Use str_plural() to fix Coccinelle warning
macintosh/via-macii: Fix "BUG: sleeping function called from invalid context"
zorro: Use helpers from ioport.h
m68k: Calculate THREAD_SIZE from THREAD_SIZE_ORDER
|
|
Merge in late fixes to prepare for the 6.10 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some versions of conntrack(8) default to ipv4-only, so this needs to request
ipv6 explicitly, like all other spots already do.
Fixes: a8a388c2aae4 ("selftests: netfilter: add packetdrill based conntrack tests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240513114649.6d764307@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240514144415.11433-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add 2 byte padding to napi_gro_cb struct to ensure zeroed member is
aligned after flush_id member was removed in the original commit.
Fixes: 4b0ebbca3e16 ("net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segment")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/fca08735-c245-49e5-af72-82900634f144@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timers update from Thomas Gleixner:
"A single update for the TSC synchronixation sanity checks:
The sad state of TSC being notoriously non-sychronized for several
decades caused the kernel to grow quite rigorous sanity checks to
detect whether the TSC is valid to be used for timekeeping.
The TSC ADJUST MSR provides the offset between the initial TSC value
after hardware reset and later modifications. This allows to detect
cases where firmware tampers with the TSC and also allows to correct
the firmware induced damage by resetting the offset in a controlled
way.
The universal correct rule is that the TSC ADJUST value has to be
consistent within all CPUs of a socket.
The kernel further assumes that the TSC offset should be consistent
between sockets. That's not really correct as systems with a huge
number of sockets are not architecurally guaranteed to reset the per
socket TSC base synchronously.
In case that the per socket offset is not consistent the kernel resets
it to the offset of the boot CPU and then does a synchronization check
which corrects for the inter socket delays.
That works most of the time, but it is suboptimal as the firmware has
eventually better information about the per socket offset and on sane
systems that offset should just work in the validation checks"
* tag 'x86-timers-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Trust initial offset in architectural TSC-adjust MSRs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Dave Hansen:
"Coccinelle complained about some 64-bit divisions, but the divisor was
really just a 32-bit value being stored as 'unsigned long'.
Fixing the types fixes the warning"
* tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Improve data types to fix Coccinelle warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Small cleanups and improvements
* tag 'x86_sev_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Make the VMPL0 checking more straight forward
x86/sev: Rename snp_init() in boot/compressed/sev.c
x86/sev: Shorten struct name snp_secrets_page_layout to snp_secrets_page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- Fix a clang-15 build warning and other cleanups
* tag 'x86_microcode_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unused struct cpu_info_ctx
x86/microcode/AMD: Remove unused PATCH_MAX_SIZE macro
x86/microcode/AMD: Avoid -Wformat warning with clang-15
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support MediaTek MT7921S SDIO
- Various fixes for -Wflex-array-member-not-at-end and -Wfamnae
- Add USB HW IDs for MT7921/MT7922/MT7925
- Add support for Intel BlazarI and Filmore Peak2 (BE201)
- Add initial support for Intel PCIe driver
- Remove HCI_AMP support
* tag 'for-net-next-2024-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (47 commits)
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
Bluetooth: hci_conn: Use struct_size() in hci_le_big_create_sync()
Bluetooth: qca: clean up defines
...
====================
Link: https://lore.kernel.org/r/20240514150206.606432-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm alternatives updates from Borislav Petkov:
- Switch the in-place instruction patching which lead to at least one
weird bug with 32-bit guests, seeing stale instruction bytes, to one
working on a buffer, like the rest of the alternatives code does
- Add a long overdue check to the X86_FEATURE flag modifying functions
to warn when former get changed in a non-compatible way after
alternatives have been patched because those changes will be already
wrong
- Other cleanups
* tag 'x86_alternatives_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Remove alternative_input_2()
x86/alternatives: Sort local vars in apply_alternatives()
x86/alternatives: Optimize optimize_nops()
x86/alternatives: Get rid of __optimize_nops()
x86/alternatives: Use a temporary buffer when optimizing NOPs
x86/alternatives: Catch late X86_FEATURE modifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
- Change the fixed-size buffer for MCE records to a dynamically sized
one based on the number of CPUs present in the system
* tag 'ras_core_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Dynamically size space for machine check records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Have skx_edac decode error addresses belonging to SGX properly
- Remove a bunch of unused struct members
- Other cleanups
* tag 'edac_updates_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/skx_common: Allow decoding of SGX addresses
EDAC/mc_sysfs: Convert sprintf()/snprintf() to sysfs_emit()
EDAC: Remove unused struct members
EDAC: Remove dynamic attributes from edac_device_alloc_ctl_info()
EDAC/device: Remove edac_dev_sysfs_block_attribute::store()
EDAC/device: Remove edac_dev_sysfs_block_attribute::{block,value}
EDAC/amd64: Remove unused struct member amd64_pvt::ext_nbcfg
|
|
In function eventfs_find_events,there is a potential null pointer
that may be caused by calling update_events_attr which will perform
some operations on the members of the ei struct when ei is NULL.
Hence,When ei->is_freed is set,return NULL directly.
Link: https://lore.kernel.org/linux-trace-kernel/20240513053338.63017-1-hao.ge@linux.dev
Cc: stable@vger.kernel.org
Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
KASAN reports a bug:
BUG: KASAN: use-after-free in ftrace_location+0x90/0x120
Read of size 8 at addr ffff888141d40010 by task insmod/424
CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcf/0x610
kasan_report+0xb5/0xe0
ftrace_location+0x90/0x120
register_kprobe+0x14b/0xa40
kprobe_init+0x2d/0xff0 [kprobe_example]
do_one_initcall+0x8f/0x2d0
do_init_module+0x13a/0x3c0
load_module+0x3082/0x33d0
init_module_from_file+0xd2/0x130
__x64_sys_finit_module+0x306/0x440
do_syscall_64+0x68/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause is that, in lookup_rec(), ftrace record of some address
is being searched in ftrace pages of some module, but those ftrace pages
at the same time is being freed in ftrace_release_mod() as the
corresponding module is being deleted:
CPU1 | CPU2
register_kprobes() { | delete_module() {
check_kprobe_address_safe() { |
arch_check_ftrace_location() { |
ftrace_location() { |
lookup_rec() // USE! | ftrace_release_mod() // Free!
To fix this issue:
1. Hold rcu lock as accessing ftrace pages in ftrace_location_range();
2. Use ftrace_location_range() instead of lookup_rec() in
ftrace_location();
3. Call synchronize_rcu() before freeing any ftrace pages both in
ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().
Link: https://lore.kernel.org/linux-trace-kernel/20240509192859.1273558-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mathieu.desnoyers@efficios.com>
Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Minor refactor and s/TX_WAIT_TIMEOUT_MS/BTINTEL_PCIE_TX_WAIT_TIMEOUT_MS/g.
Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
