| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues on zoned
storage such as direct IO and write_hints. In addition, we've migrated
some IO paths using folio. Meanwhile, there are multiple bug fixes in
the compression paths, sanity check conditions, and error handlers.
Enhancements:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fixes:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of
f2fs_new_node_page()
- compress:
- don't allow unaligned truncation on released compress inode
- cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- fix error path of inc_valid_block_count()
- fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage
missing corner cases in the error paths"
* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
f2fs: initialize last_block_in_bio variable
f2fs: Add inline to f2fs_build_fault_attr() stub
f2fs: fix some ambiguous comments
f2fs: fix to add missing iput() in gc_data_segment()
f2fs: allow dirty sections with zero valid block for checkpoint disabled
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs: fix to release node block count in error path of f2fs_new_node_page()
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
f2fs: compress: fix error path of inc_valid_block_count()
f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
f2fs: compress: fix to update i_compr_blocks correctly
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
f2fs: fix to limit gc_pin_file_threshold
f2fs: remove unused GC_FAILURE_PIN
f2fs: use f2fs_{err,info}_ratelimited() for cleanup
f2fs: fix block migration when section is not aligned to pow2
f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
f2fs: fix to avoid allocating WARM_DATA segment for direct IO
f2fs: remove redundant parameter in is_next_segment_free()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
|
|
Update ABI documentation about the introduction of the new sysfs
entry bootargs_append. This sysfs entry will be used to setup the
additional parameters to be passed to dump capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240510082114.561163-1-hbathini@linux.ibm.com
|
|
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like
there are no users since then, and no testers and no developers, it's
just not active at all.
On the other hand, even if the config is disabled, there are still many
fields in throtl_grp and throtl_data and many functions that are only
used for throtl low.
At last, currently blk-throtl is initialized during disk initialization,
and destroyed during disk removal, and it exposes many functions to be
called directly from block layer.
Remove throtl low to make code much more cleaner and follow up work much
easier.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
type of f2fs_inode.i_gc_failures, f2fs_inode_info.i_gc_failures, and
f2fs_sb_info.gc_pin_file_threshold is __le16, unsigned int, and u64,
so it will cause truncation during comparison and persistence.
Unifying variable of these three variables to unsigned short, and
add an upper boundary limitation for gc_pin_file_threshold.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This list was moved many years ago.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503121012.3ba5000b@canb.auug.org.au
|
|
Update DAMON ABI document for the newly added DAMO filter type, 'young
page'.
Link: https://lkml.kernel.org/r/20240426195247.100306-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch includes documentation for mTHP counters and an ABI file for
sys-kernel-mm-transparent-hugepage, which appears to have been missing for
some time.
[v-songbaohua@oppo.com: fix the name and unexpected indentation]
Link: https://lkml.kernel.org/r/20240415054538.17071-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240412114858.407208-4-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To avoid directory scans in perf it is going to be assumed that sysfs
event names are either lower or upper case.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Userspace had been unknowingly relying on a non-stable interface of
kernel internals to determine if partition scanning is enabled for a
given disk. Provide a stable interface for this purpose instead.
Cc: stable@vger.kernel.org # 6.3+
Depends-on: 140ce28dd3be ("block: add a disk_has_partscan helper")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-block/ZhQJf8mzq_wipkBH@gardel-login/
Link: https://lore.kernel.org/r/20240502130033.1958492-3-hch@lst.de
[axboe: add links and commit message from Keith]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: hwtracing subsystem updates for v6.10
CoreSight/hwtracing updates for the next release includes:
- ACPI power management support for CoreSight legacy components, via migration
from AMBA to platform device
- Fixes for ETE register save/restore during CPU Idle.
- ACPI support TMC for Scatter-Gather mode.
- his_ptt driver update to set the parent device for PMU and documentation fixes
- Qcomm Trace component DT binding fixes
- Miscellaneous cleanups
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (28 commits)
hwtracing: hisi_ptt: Assign parent for event_source device
Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source
coresight: tmc: Enable SG capability on ACPI based SoC-400 TMC ETR devices
coresight: Docs/ABI/testing/sysfs-bus-coresight-devices: Fix spelling errors
coresight: tpiu: Convert to platform remove callback returning void
coresight: tmc: Convert to platform remove callback returning void
coresight: stm: Convert to platform remove callback returning void
coresight: debug: Convert to platform remove callback returning void
coresight: catu: Convert to platform remove callback returning void
coresight: Remove duplicate linux/amba/bus.h header
coresight: stm: Remove duplicate linux/acpi.h header
coresight: etm4x: Fix access to resource selector registers
coresight: etm4x: Safe access for TRCQCLTR
coresight: etm4x: Do not save/restore Data trace control registers
coresight: etm4x: Do not hardcode IOMEM access for register restore
coresight: debug: Move ACPI support from AMBA driver to platform driver
coresight: stm: Move ACPI support from AMBA driver to platform driver
coresight: tmc: Move ACPI support from AMBA driver to platform driver
coresight: tpiu: Move ACPI support from AMBA driver to platform driver
coresight: catu: Move ACPI support from AMBA driver to platform driver
...
|
|
Currently, led pattern trigger uses timer_list to schedule brightness
changing. As we know from timer_list API [1], it's not accurate to
milliseconds and depends on HZ granularity.
Example:
"0 10 0 0 50 10 50 0 100 10 100 0 150 10 150 0 200 10 200 0 250 10 250 0",
we expect it to be 60ms long, but it can actually be up to ~120ms
(add ~10ms for each pattern when HZ == 100).
But sometimes, userspace needs time accurate led patterns to make sure
that pattern will be executed during expected time slot.
To achieve this goal the patch introduces optional hrtimer usage for
led trigger pattern, because hrtimer is microseconds accurate timer.
[1]: kernel/time/timer.c#L104
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Link: https://lore.kernel.org/r/20240416201847.357099-1-mmkurbanov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
To allow for assigning a suitable parent to the struct pmu device
update the documentation to describe the device via the event_source
bus where it will remain accessible.
For the ABI documention file also rename the file as it is named
after the path.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-30-Jonathan.Cameron@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Added a new API mhi_power_down_keep_dev() to not destroy the struct dev
associated with the MHI channels during MHI power down. This is useful in
scenarios such as system suspend/hibernation where the probability of
channels coming back is very high. So the PM maintainer suggested not to
destroy the struct dev in those cases.
This API is introduced for fixing the failure reported in the ath11k driver
during resume from system suspend.
NOTE: Due to the API dependency, the patch adding the API is pushed to an
immutable branch (mhi-immutable) and merged into both mhi and ath trees. But
the merge commit is not visible in mhi tree due to git being smart with
'fast-forward'.
- Added an optional sysfs entry to force the MHI devices to enter the Emergency
Download (EDL) mode to download the firmware from host.
- Added EDL mode support for Qcom SDX75/65/55 modems as per the MHI spec v1.2,
Chapter 13.2. This involves writing a cookie to the EDL doorbell registers and
then triggering the device reset from host.
* tag 'mhi-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add generic edl_trigger to allow devices to enter EDL mode
bus: mhi: host: Add a new API for getting channel doorbell offset
bus: mhi: host: Add sysfs entry to force device to enter EDL
bus: mhi: host: Add mhi_power_down_keep_dev() API to support system suspend/hibernation
|
|
The elfcorehdr describes the CPUs and memory of the crashed kernel to
the kernel that captures the dump, known as the second or fadump kernel.
The elfcorehdr needs to be updated if the system's memory changes due to
memory hotplug or online/offline events.
Currently, memory hotplug events are monitored in userspace by udev
rules, and fadump is re-registered, which recreates the elfcorehdr with
the latest available memory in the system.
However, the previous patch ("powerpc: make fadump resilient with memory
add/remove events") moved the creation of elfcorehdr to the second or
fadump kernel. This eliminates the need to regenerate the elfcorehdr
during memory hotplug or online/offline events.
Create a sysfs entry at /sys/kernel/fadump/hotplug_ready to let
userspace know that fadump re-registration is not required for memory
add/remove events.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-3-sourabhjain@linux.ibm.com
|
|
Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.
The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.
The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.
The driver was tested by the user who created the github issue.
Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix spelling and gramatical errors
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
[ Adjusted title ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240428011401.1080-1-rbrasga@uci.edu
|
|
Add sysfs entry to allow users of MHI bus to force device to enter EDL
(Emergency Download) mode to download the device firmware. Since there is
no guarantee that all the devices will support EDL mode, the sysfs entry
is kept as an optional one and will appear only for the supported devices.
Controllers supporting the EDL mode are expected to provide edl_trigger()
callback that puts the device into EDL mode.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1713928915-18229-2-git-send-email-quic_qianyu@quicinc.com
[mani: fixed the kernel version and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable
of synthesizing wideband signals from DC up to 3 GHz.
A dual-port, source synchronous, LVDS interface simplifies the digital
interface with existing FGPA/ASIC technology. On-chip controllers are used
to manage external and internal clock domain variations over temperature to
ensure reliable data transfer from the host to the DAC core.
Co-developed-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-10-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The 'efivars' sysfs interface was removed in commit 0f5b2c69a4cb ("efi:
vars: Remove deprecated 'efivars' sysfs interface"), but the ABI
documentation was not updated properly.
Strip down the documentation file for /sys/firmware/efi/vars to a very
basic description of what the interface was about, add a section about
the rough removal timeline, and inform the reader about the intended
replacement.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add support for an MCU powersave WMI call. This is intended to set the
MCU in to a low-power mode when sleeping. This mode can cut sleep power
use by around half.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-9-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for toggling the BIOS POST sound on some ASUS laptops.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-5-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Support the 2024 mini-led backlight and adjust the related functions
to select the relevant dev-id. Also add `available_mini_led_mode` to the
platform sysfs since the available mini-led levels can be different.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For example the BMP280 barometric pressure sensor on Qualcomm
MSM8974-based Nexus 5 smartphone exposes such file in sysfs.
Document it.
Whilst here, fix up incorrect repeated use of X as a wildcard
for in_tempY_input.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240406-in_temp_input-v1-1-a1744a4a49e3@z3ntu.xyz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Backmerging to get v6.9-rc2 changes into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add infra to support card power and energy attributes through channel 0.
Package attributes will be now exposed through channel 1 rather than
channel 0 as shown below.
Channel 0 i.e power1/energy1_xxx used for card and
channel 1 i.e power2/energy2_xxx used for package power,energy attributes.
power1/curr1_crit and in0_input are moved to channel 1, i.e.
power2/curr2_crit and in1_input as these are available for package only.
This would be needed for future platforms where they might be
separate registers for package and card power and energy.
Each discrete GPU supported by Xe driver, would have a directory in
/sys/class/hwmon/ with multiple channels under it.
Each channel would have attributes for power, energy etc.
Ex: /sys/class/hwmon/hwmon2/power1_max
/power1_label
/energy1_input
/energy1_label
Attributes will have a label to get more description of it.
Labelling is as below.
power1_label/energy1_label - "card",
power2_label/energy2_label - "pkg".
v2: Fix checkpatch errors.
v3:
- Update intel-xe-hwmon documentation. (Riana, Badal)
- Rename hwmon card channel enum from CHANNEL_PLATFORM
to CHANNEL_CARD. (Riana)
v4:
- Remove unrelated changes from patch. (Anshuman)
- Fix typo in commit msg.
v5:
- Update commit message and intel-xe-hwmon documentation with "Xe"
instead of xe when using it as a name. (Rodrigo)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328175435.3870957-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Also add a newline character at the end of the last one.
Fixes: b12f3ea7c188 ("drm/panfrost: Replace fdinfo's profiling debugfs knob with sysfs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20240326160110.4c00e1e5@canb.auug.org.au/
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326134812.4008775-1-adrian.larumbe@collabora.com
|
|
This patch prepares onboad_hub to support non-hub devices by renaming
the driver files and their content, the headers and their references.
The comments and descriptions have been slightly modified to keep
coherence and account for the specific cases that only affect onboard
hubs (e.g. peer-hub).
The "hub" variables in functions where "dev" (and similar names) variables
already exist have been renamed to onboard_dev for clarity, which adds a
few lines in cases where more than 80 characters are used.
No new functionality has been added.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240325-onboard_xvf3500-v8-2-29e3f9222922@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this round, there are a number of updates on mainly two areas:
Zoned block device support and Per-file compression. For example,
we've found several issues to support Zoned block device especially
having large sections regarding to GC and file pinning used for
Android devices. In compression side, we've fixed many corner race
conditions that had broken the design assumption.
Enhancements:
- Support file pinning for Zoned block device having large section
- Enhance the data recovery after sudden power cut on Zoned block
device
- Add more error injection cases to easily detect the kernel panics
- add a proc entry show the entire disk layout
- Improve various error paths paniced by BUG_ON in block allocation
and GC
- support SEEK_DATA and SEEK_HOLE for compression files
Bug fixes:
- avoid use-after-free issue in f2fs_filemap_fault
- fix some race conditions to break the atomic write design
assumption
- fix to truncate meta inode pages forcely
- resolve various per-file compression issues wrt the space
management and compression policies
- fix some swap-related bugs
In addition, we removed deprecated codes such as io_bits and
heap_allocation, and also fixed minor error handling routines with
neat debugging messages"
* tag 'f2fs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault
f2fs: truncate page cache before clearing flags when aborting atomic write
f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag
f2fs: prevent atomic write on pinned file
f2fs: fix to handle error paths of {new,change}_curseg()
f2fs: unify the error handling of f2fs_is_valid_blkaddr
f2fs: zone: fix to remove pow2 check condition for zoned block device
f2fs: fix to truncate meta inode pages forcely
f2fs: compress: fix reserve_cblocks counting error when out of space
f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks
f2fs: add a proc entry show disk layout
f2fs: introduce SEGS_TO_BLKS/BLKS_TO_SEGS for cleanup
f2fs: fix to check return value of f2fs_gc_range
f2fs: fix to check return value __allocate_new_segment
f2fs: fix to do sanity check in update_sit_entry
f2fs: fix to reset fields for unloaded curseg
f2fs: clean up new_curseg()
f2fs: relocate f2fs_precache_extents() in f2fs_swap_activate()
f2fs: fix blkofs_end correctly in f2fs_migrate_blocks()
f2fs: ro: don't start discard thread for readonly image
...
|
|
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add passthrough mode for regular file I/O.
This allows performing read and write (also via memory maps) on a
backing file without incurring the overhead of roundtrips to
userspace. For now this is only allowed to privileged servers, but
this limitation will go away in the future (Amir Goldstein)
- Fix interaction of direct I/O mode with memory maps (Bernd Schubert)
- Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)
- Allow resending queued requests for server crash recovery (Zhao Chen)
- Misc fixes and cleanups
* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
fuse: get rid of ff->readdir.lock
fuse: remove unneeded lock which protecting update of congestion_threshold
fuse: Fix missing FOLL_PIN for direct-io
fuse: remove an unnecessary if statement
fuse: Track process write operations in both direct and writethrough modes
fuse: Use the high bit of request ID for indicating resend requests
fuse: Introduce a new notification type for resend pending requests
fuse: add support for explicit export disabling
fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
fuse: fix typo for fuse_permission comment
fuse: Convert fuse_writepage_locked to take a folio
fuse: Remove fuse_writepage
virtio_fs: remove duplicate check if queue is broken
fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
fuse: don't unhash root
fuse: fix root lookup with nonzero generation
fuse: replace remaining make_bad_inode() with fuse_make_bad()
virtiofs: drop __exit from virtio_fs_sysfs_exit()
fuse: implement passthrough for mmap
fuse: implement splice read/write passthrough
...
|
|
Pick up documentation build fix for v6.9.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
Stephen reported that an htmldocs build hit:
Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation.
It turns out that line was fine but the tool was unhappy about some line
breaks in the table of values to error types.
It turns out that:
make V=1 SPHINXDIRS="admin-guide" htmldocs
...can not be used to get more info about what is behind a documentation
build error. It was only pure luck that reflowing the text resulted in
an error message that seemed a imply a problem later on with line breaks
around the table.
Fixes: 8039804cfa73 ("cxl/core: Add CXL EINJ debugfs files")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
