Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document support for the Clock Pulse Generator (CPG) and Module Standby
Software Reset (MSSR) module on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/eb3cd02b62f3ca834df079a3f1e551d9414fe42a.1706194617.git.geert+renesas@glider.be
|
|
'bus' and 'ip' are sufficient because naming is local to the module.
As the bindings have not made a release yet, rename the cmu_misc
clock-names.
Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
|
|
* clk-rs9:
clk: rs9: Add support for 9FGV0841
clk: rs9: Replace model check with bitshift from chip data
clk: rs9: Limit check to vendor ID in VID register
dt-bindings: clk: rs9: Add 9FGV0841
|
|
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
* clk-zynq:
drivers: clk: zynqmp: update divider round rate logic
drivers: clk: zynqmp: calculate closest mux rate
* clk-xilinx:
clocking-wizard: Add support for versal clocking wizard
dt-bindings: clock: xilinx: add versal compatible
* clk-stm:
dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
clk: stm32mp1: use stm32mp13 reset driver
clk: stm32mp1: move stm32mp1 clock driver into stm32 directory
|
|
clk-next
* clk-imx:
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
dt-bindings: clock: support i.MX93 ANATOP clock module
* clk-qcom: (41 commits)
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
clk: qcom: gcc-sm8550: Mark RCGs shared where applicable
clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs
clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable
clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag
clk: qcom: camcc-sc8280xp: Prevent error pointer dereference
clk: qcom: videocc-sm8150: Add runtime PM support
clk: qcom: videocc-sm8150: Add missing PLL config property
clk: qcom: videocc-sm8150: Update the videocc resets
dt-bindings: clock: Update the videocc resets for sm8150
clk: qcom: rpmh: Add support for X1E80100 rpmh clocks
clk: qcom: Add Global Clock controller (GCC) driver for X1E80100
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100
dt-bindings: clock: qcom: Add X1E80100 GCC clocks
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
clk: qcom: branch: Add mem ops support for branch2 clocks
...
* clk-amlogic:
clk: meson: g12a: add CSI & ISP gates clocks
clk: meson: g12a: add MIPI ISP clocks
dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids
clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks
dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids
* clk-mediatek:
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: brcm,kona-ccu: convert to YAML
dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema
dt-bindings: Remove alt_ref from versal
|
|
'clk-sophgo' into clk-next
- Add glitch free PLL setting support to si5351 clk driver
* clk-versa:
clk: versaclock3: Drop ret variable
clk: versaclock3: Add missing space between ')' and '{'
clk: versaclock3: Use u8 return type for get_parent() callback
clk: versaclock3: Avoid unnecessary padding
clk: versaclock3: Update vc3_get_div() to avoid divide by zero
* clk-silabs:
clk: si5351: allow PLLs to be adjusted without reset
dt-bindings: clock: si5351: add PLL reset mode property
dt-bindings: clock: si5351: convert to yaml
* clk-samsung:
clk: samsung: Improve kernel-doc comments
clk: samsung: Fix kernel-doc comments
* clk-starfive:
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
* clk-sophgo:
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
|
|
Add various clock controllers found in the MT7988 SoC to existing
bindings (if applicable) and add files for the new ethwarp, mcusys
and xfi-pll clock controllers not previously present in any SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/07e76a544ce4392bcb88e34d5480e99bb7994618.1702849494.git.daniel@makrotopia.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add definition for the clock controller of the CV1800 series SoC.
For CV181X, it has a clock that CV180X does not have. To avoid misuse,
also add a compatible string to identify CV181X series SoC.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://github.com/milkv-duo/duo-files/blob/main/hardware/CV1800B/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49535E448097F6FFC1218C39BB90A@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.8
This adds devicetree bindings and nodes for:
- Media Data Path 3 (MDP3) bindings and enablement on MT8195
- Smart Voltage Scaling (SVS) on MT8195
- LVTS SoC thermal on MT8192
- MT8188 SoC along with its resets, display bindings, and more
- MT8183 hardware video decoder (mtk-vcodec-dec)
Adds the following new machines:
- MT8188 Evaluation Board (EVB)
- MT8183 Chromebooks: Kukui-Katsu, Jacuzzi-Makomo, Pico, Pico6
Performs cleanups for various MediaTek SoCs and PMICs, and also
includes some spare fixes.
* tag 'mtk-dts64-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (60 commits)
arm64: dts: mediatek: mt8192: Add Smart Voltage Scaling node
arm64: dts: mediatek: mt8195: Add SVS node and reduce LVTS_AP iospace
arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs
arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes
arm64: dts: mediatek: mt8186: Fix alias prefix for ovl_2l0
arm64: dts: mt6358: Drop bogus "regulator-fixed" compatible properties
arm64: dts: mt8183: kukui-jacuzzi: Drop bogus anx7625 panel_flag property
arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
dt-bindings: soc: mediatek: pwrap: Modify compatible for MT8188
dt-bindings: arm: mediatek: Add mt8188 pericfg compatible
dt-bindings: arm: Add compatible for MediaTek MT8188
arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
dt-bindings: display: mediatek: dsi: add compatible for MediaTek MT8195
arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators
dt-bindings: arm: mediatek: convert audsys and mt2701-afe-pcm to yaml
arm64: dts: mediatek: mt8195: add MDP3 nodes
arm64: dts: mediatek: mt8195: revise VDOSYS RDMA node name
arm64: dts: mediatek: mt8183: correct MDP3 DMA-related nodes
dt-bindings: display: mediatek: padding: add compatible for MT8195
dt-bindings: display: mediatek: split: add compatible for MT8195
...
Link: https://lore.kernel.org/r/20231212114515.121695-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.8
Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
Since no driver changes are needed in this work and the DTS is
directly affected by bindings change (running tests with `make
dtbs_check`), this pull includes all bindings changes, even though
usual practice is that bindings come via driver subsystem. Keeping
everything here makes review and testing easier. Also will allow us
to avoid conflicts related to new platforms (see below).
2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
Kit) with minimal support so far: serial console, GPIO-based keys and
PWM fan.
3. Add few bindings for upcoming Google GS101 SoC. This pull request
does not include its DTS yet, just few reviewed dependencies. DTS
will be coming soon.
[1] Documentation/devicetree/bindings/writing-bindings.rst
* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
arm64: dts: exynos: add initial support for exynosautov920 SoC
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
...
Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
For applications where the PLL must be adjusted without glitches in the
clock output(s), a new silabs,pll-reset-mode property is added. It
can be used to specify whether or not the PLL should be reset after
adjustment. Resetting is known to cause glitches.
For compatibility with older device trees, it must be assumed that the
default PLL reset mode is to unconditionally reset after adjustment.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Jacob Siverskog <jacob@teenage.engineering>
Cc: Sergej Sawazki <sergej@taudac.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-2-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The following additional properties are described:
- clock-names
- clock-frequency of the clkout child nodes
In order to suppress warnings from the DT schema validator, the clkout
child nodes are prescribed names clkout@[0-7] rather than clkout[0-7].
The example is refined as follows:
- correct the usage of property pll-master -> silabs,pll-master
- give an example of how the silabs,pll-reset property can be used
I made myself maintainer of the file as I cannot presume that anybody
else wants the responsibility.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20231124-alvin-clk-si5351-no-pll-reset-v6-1-69b82311cb90@bang-olufsen.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Adds clock and reset binding entries for STM32MP25 SoC family
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208143700.354785-4-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This is an 8-channel variant of 9FGV series.
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231113221949.111964-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Convert Broadcom Kona family clock controller unit (CCU) bindings
to DT schema.
Changes during conversion:
- remove "dmac" from clock-output-names for brcm,bcm11351-master-ccu,
such a clock doesn't exist
- remove "uartb4" from clock-output-names for brcm,bcm21664-slave-ccu,
such a clock doesn't exist
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ZVED01t3+coBd44x@standask-GA-A55M-S2HP
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
DT schema helps validating DTS files. Binding was moved to clock/ as
this hardware is a clock provider. Example required a small fix for
"reg" value (1 address cell + 1 size cell).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231119212416.2682-1-zajec5@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the devicetree compatible for Versal clocking wizard.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231214105125.26919-2-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The alt_ref is present only in Versal-net devices.
Other versal devices do not have it. So remove alt_ref
for versal.
Fixes: 352546805a44 ("dt-bindings: clock: Add bindings for versal clock driver")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231128104348.16372-1-shubhrajyoti.datta@amd.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For MT8188, VPPSYS0 and VPPSYS1 are 2 display pipes with
hardware differences in power domains, clocks and subsystem counts,
which should be probed from mtk-mmsys driver to populate device by
platform_device_register_data then start its own clock driver.
Signed-off-by: yu-chang.lee <yu-chang.lee@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Provide dt-schema documentation for Google gs101 SoC clock controller.
Currently this adds support for cmu_top, cmu_misc and cmu_apm.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231209233106.147416-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The hi3620-clock binding is simple and always a child of the
"hisilicon,sysctrl" node, so just add it into the hisilicon,sysctrl
binding and drop the old txt binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Merge the X1E80100 clock bindings to get access to the clock constants.
|
|
Merge the X1E80100 DeviceTree bindings through a topic branch, to allow
the clock constants to be shared with the DeviceTree branch.
|
|
Add bindings and update documentation for clock rpmh driver on X1E80100
SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-4-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for global clock controller on X1E80100 SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8
Merge the SM8650 clock bindings, to gain access to the clock constants.
|
|
clk-for-6.8
Merge the ECPI clock controller through a topic branch to make it
possible to merge the clock constants into the DeviceTree branch as
well.
|
|
Add device tree bindings for qcom ecpri clock controller on QDU1000 and
QRU1000 SoCs.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231123064735.2979802-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into clk-for-6.8
Merge SM8650 GCC, TCSRCC, DISPCC, GPUCC and RPMHCC bindings through a
topic branch to make it possible to also merge and use the constants in
the DeviceTree branch.
|
|
Add bindings documentation for the SM8650 RPMH Clock Controller.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 Graphics Clock Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-4-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 Display Clock Controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-3-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 General Clock Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-2-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for the SM8650 TCSR Clock Controller.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-topic-sm8650-upstream-clocks-v3-1-761a6fadb4c0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
arm64-for-6.8
Merge the SC8280XP Camera Clock Controller binding updates from the
topic branch, to gain access to clock defines to be used in DeviceTree
source.
|
|
Merge the SC8280XP Camera Clock Controller binding changes through a
topic branch to allow them to be merged and used in the DeviceTree
source branch as well.
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SC8280XP platform.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Various of the camcc bindings are repeated serially. We can use
qcom,gcc.yaml to encapsulate the generic repeated patterns.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026105345.3376-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm IPQ6018 GCC clock controller has clock inputs, thus existing
gcc-other.yaml was not describing it fully so move it to a separate schema.
Fully document the allowed and required XO and sleep clock inputs, as well
as update the provided example.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231026101931.695497-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Support i.MX93 ANATOP module which contains PLL and OSC for Clock
Controller Module
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231121063446.155300-1-peng.fan@oss.nxp.com
[abel.vesa@linaro.org: renamed to ANATOP instead of Analog]
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
QMP PCI PHY PIPE clocks are inputs for the GCC clock controller.
In order to describe this in DTS, allow passing them as the inputs to GCC.
This has a benefit that it avoids doing a global matching by name.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add IPQ5018 compatible to A53 PLL bindings.
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230925102826.405446-2-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231124092121.16866-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'clk-frac-divider' into clk-next
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
|
|
and 'clk-qcom' into clk-next
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
|
|
'clk-imx' into clk-next
- Add clock driver for TWL6032
* clk-doc:
clk: linux/clk-provider.h: fix kernel-doc warnings and typos
* clk-amlogic:
clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS
clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller
clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
dt-bindings: clock: document Amlogic S4 SoC peripherals clock controller
dt-bindings: clock: document Amlogic S4 SoC PLL clock controller
* clk-mediatek:
clk: mediatek: fix double free in mtk_clk_register_pllfh()
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data
* clk-twl:
clk: twl: add clock driver for TWL6032
* clk-imx:
clk: imx: imx8qm/qxp: add more resources to whitelist
clk: imx: scu: ignore clks not owned by Cortex-A partition
clk: imx8: remove MLB support
clk: imx: imx8qm-rsrc: drop VPU_UART/VPUCORE
clk: imx: imx8qxp: correct the enet clocks for i.MX8DXL
clk: imx: imx8qxp: Fix elcdif_pll clock
clk: imx: imx8dxl-rsrc: keep sorted in the ascending order
clk: imx: imx6sx: Allow a different LCDIF1 clock parent
clk: imx: imx8mq: correct error handling path
clk: imx8mp: Remove non-existent IMX8MP_CLK_AUDIOMIX_PDM_ROOT
clk: imx: imx8: Simplify clk_imx_acm_detach_pm_domains()
clk: imx: imx8: Add a message in case of devm_clk_hw_register_mux_parent_data_table() error
clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()
clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails
clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()
clk: imx: Select MXC_CLK for CLK_IMX8QXP
|