Age | Commit message (Collapse) | Author | Files | Lines |
|
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
HDMI Audio has been added to the DT binding documentation with an
incorrect index. DT and the driver use index 26. This happened,
because the binding is missing MULTI_SAI type, which is using
index 25.
Reported-by: Michael Yackavage <michaely@ips-yes.com>
Fixes: 7bdbd87d4008 ("dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schema")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240226212740.2019837-6-sre@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document support for the Direct Memory Access Controllers (DMAC) in the
Renesas R-Car V4M (R8A779H0) SoC.
Based on a patch in the BSP by Thanh Le.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/96aad3b532ee401f19693e18038494f43ddb90e9.1707915609.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This helps validating DTS files. Introduced changes:
1. Adjusted "reg" in example
2. Added includes to example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240213063919.20196-1-zajec5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the compatible string 'fsl,imx95-edma5' to support the i.MX95's eDMA,
which features 64-bit physical address support.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231221153528.1588049-6-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the Marvell MMP DMA binding to YAML.
The TXT binding mentions that the controller may have one IRQ per DMA
channel. Examples of this were dropped in the YAML binding because of
dt_binding_check complaints (either too many interrupt cells or
interrupts) and the fact that this is not used in any of the in-tree
device trees.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240131-pxa-dma-yaml-v2-2-9611d0af0edc@skole.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.
Since the number of channels and endpoints are described with additional
generic properties, just add a new H616-specific compatible string and
fallback to the A100 one.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-5-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add Loongson LS2X APB DMA controller binding with DT schema
format using json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/078307641077edaf46dd986c6d31cea15545a208.1702365725.git.zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add dma-channel-mask binding doc support to nvidia,tegra210-adma
to reserve the adma channel usage
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20231128071615.31447-2-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add new compatible name microchip,mpfs-pdma to support
out of order dma transfers
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Link: https://lore.kernel.org/r/20231208103856.3732998-3-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The compatibles "ti,omap-sdma" and "ti,dra7-dma-crossbar" aren't documented
by a schema which causes warnings:
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
As no one has cared to fix them, just drop them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122235050.2966280-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the GPI DMA Engine on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025-topic-sm8650-upstream-bindings-gpi-v2-1-4de85293d730@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMAC block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-dmac" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
No driver changes are required as generic compatible string
"renesas,rz-dmac" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231102203922.548353-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Qualcomm X1E80100 uses GPI DMA for its GENI interface. Add a compatible
string for it in the documentation by using the SM6350 as fallback.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124100608.29964-4-quic_sibis@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for introducing more register regions, add description
for existing register regions so that its easier to map reg-names to
that of SoC Documentations/TRMs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
- Big pile of __counted_by attribute annotations to several structures
for bounds checking of flexible arrays at run-time
- Another big pile platform remove callback returning void changes
- Device tree device_get_match_data() usage and dropping
of_match_device() calls
- Minor driver updates to pxa, idxd fsl, hisi etc drivers
* tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits)
dmaengine: stm32-mdma: correct desc prep when channel running
dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16
dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove()
dmaengine: mmp_tdma: drop unused variable 'of_id'
MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers
dmaengine: xilinx: xdma: Support cyclic transfers
dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers
dmaengine: Drop unnecessary of_match_device() calls
dmaengine: Use device_get_match_data()
dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by
dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
dmaengine: xilinx: xdma: Use resource_size() in xdma_probe()
dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver
dmaengine: Remove unused declaration dma_chan_cleanup()
dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning
dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning
dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq()
dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by
dmaengine: idxd: add wq driver name support for accel-config user tool
dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by
...
|
|
On SM8550, the GPI DMA controller is coherent with the CPU.
Allow specifying that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230830-topic-8550_dmac2-v1-1-49bb25239fb1@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
xlnx,bus-width is a required property. In yaml conversion somehow
it got missed out. Bring it back and mention it in required list.
Also add Harini and myself to the maintainer list.
Fixes: 5a04982df8da ("dt-bindings: dmaengine: zynqmp_dma: convert to yaml")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/1695216326-3841352-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
|
|
Extend Freescale eDMA driver bindings to support eDMA3 IP blocks in
i.MX8QM and i.MX8QXP SoCs. In i.MX93, both eDMA3 and eDMA4 are now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230821161617.2142561-12-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add an optional AXI DMA property 'xlnx,irq-delay'. It specifies interrupt
timeout value and causes the DMA engine to generate an interrupt after the
delay time period has expired. Timer begins counting at the end of a packet
and resets with receipt of a new packet or a timeout event occurs.
This property is useful when AXI DMA is connected to the streaming IP i.e
axiethernet where inter packet latency is critical while still taking the
benefit of interrupt coalescing.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1691387509-2113129-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add an optional AXI DMA property 'xlnx,axistream-connected'. This
can be specified to indicate that DMA is connected to a streaming IP
in the hardware design and dma driver needs to do some additional
handling i.e pass metadata and perform streaming IP specific
configuration.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1691387509-2113129-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add compatible for sam9x7.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728102451.265869-1-varshini.rajendran@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The BAM DMA resources can be controlled remotely (e.g. by trusted
environment; needs qcom,powered-remotely or qcom,controlled-remotely
properties) or locally. In the latter case we need to provide its
clock.
Require one of methods of such control to properly validate DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230626145645.646136-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the DT binding document for bcm2835-dma from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230617133620.53129-3-stefan.wahren@i2se.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Since SM8250 BAM DMA engine supports six iommu entries,
increase the maxItems in the iommu property section, without
which 'dtbs_check' would throw errors.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add new compatible for BAM DMA engine version v1.7.4 which is
found on Qualcomm SM6115 and QCM2290 SoCs. Since its very similar
to v1.7.0 used on SM8150 like SoCs, mark the comptible scheme
accordingly.
While at it, also update qcom,bam-dma bindings to add comments
which describe the BAM DMA versions used in SM8150 and SM8250 SoCs.
This provides an easy reference for identifying the actual BAM DMA
version available on Qualcomm SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add bindings for J721S2 BCDMA instance dedicated for Camera
Serial Interface. Unlike AM62A CSI BCDMA, this instance has RX
and TX channels but lacks block copy channels.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230505143929.28131-2-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
DP DMA has own power domain that's why describe required power-domain
property.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/8f5651634df338743f95a7253a741f9ddc92487d.1683891609.git.michal.simek@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Extend the DMA40 bindings so that we can pass two SRAM
segments as phandles instead of directly referring to the
memory address in the second reg cell. This enables more
granular control over the SRAM, and adds the optiona LCLA
SRAM segment as well.
Deprecate the old way of passing LCPA as a second reg cell,
make sram compulsory.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-1-60bfa6785968@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DMA controller needs two reset items to work properly on JH7110 SoC,
so there is need to constrain the items' value to 2, other platforms
have 1 reset item at most.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-2-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230331182141.1900348-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The block found on Apple's M2 SoC is compatible with the existing driver
so add its per-SoC compatible.
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Martin Povišer <povik+lin@cutebit.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20230202-asahi-t8112-dt-v3-13-d1a5f6383d95@jannau.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document clock-names and reset-names properties as we have multiple
clocks and resets.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230315064726.22739-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a compatible for the single GPI DMA controller on QCM2290. It uses
the same 0x10000 offset as SM6350.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230314-topic-2290_compats-v1-2-47e26c3c0365@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
New hardware support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
|
|
Cleanup examples:
- use 4-space indentation (for cases when it is neither 4 not 2 space),
- use lowercase hex,
- drop unused node's label.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230124081117.31186-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Cleanup by removing unneeded quotes from refs and redundant blank lines.
No functional impact except adjusting to preferred coding style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> # mediatek
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hector Martin <marcan@marcan.st> # apple
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # Spear
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # Renesas
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # Socionext
Link: https://lore.kernel.org/r/20230124081117.31186-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of redefining the 'ti,sci' and 'ti,sci-dev-id' properties multiple
times, reference the common schema where they are defined. Most cases
using these properties already do this, just udma and ringacc need to be
fixed.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20230125221339.3057322-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The Qualcomm SM8550 uses GPI DMA for its GENI interface. Add a compatible
string for it in the documentation by using the SM6350 as fallback.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-gpi-v1-0-33b28a227c5d@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the i.MX SDMA binding to DT schema format using json-schema.
The compatibles fsl,imx31-to1-sdma, fsl,imx31-to2-sdma, fsl,imx35-to1-sdma
and fsl,imx35-to2-sdma are not used. So need to delete it. The compatibles
fsl,imx50-sdma, fsl,imx6sll-sdma and fsl,imx6sl-sdma are added. The
original binding don't list all compatible used.
In addition, add new peripheral types HDMI Audio.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115093823.2879128-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
AM62A SoC has a dedicated BCDMA that serves Camera Serial Interface
(CSI) IP. Add new compatible for the same. Unlike system
BCDMA, this instance only has RX DMA channels and lack TX or block copy
channel. Thus make those properties optional. Additionally CSI RX has
independent power domain, add the binding for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221213164304.1126945-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add compatible for gpi on QDU1000 and QRU1000 SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221216231513.25085-1-quic_molvera@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the MXS DMA binding to DT schema format using json-schema.
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.
Update example node names to be standard dma-controller@ ,
add global interrupt-parent property into example.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221219093713.328776-1-marex@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document compatibility for this GPI DMA controller on SM6125.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
[Marijn: Move compatible to the list with qcom,sdm845-gpi-dma]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221222194600.139854-2-marijn.suijten@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|