Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's one API update here, a new API factoring out a common pattern
for reference voltage supplies. These are supplies used as a reference
by analogue circuits where the consumer requests and enables the
supply, reads the voltage to calibrate the user and then never touches
it again. This is factored out into a single operation which just
returns the voltage and uses devm_ to manage the request and enable
portion.
Otherwise this has been a very quiet release, we've got some new
device support, some small fixes, housekeeping and cleanup work but
nothing substantial.
There's also some non-regulator changes in here, a number of users for
the new reference voltage API were merged along with it and some MFD
changes were pulled in as dependencies for new driver work.
Highlights:
- Add a new API for single operation handling of reference voltages
- Support for Allwinner AXP717 and D1, and NXP PCA9561A"
* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
regulator: sun20i: Add Allwinner D1 LDOs driver
regulator: dt-bindings: Add Allwinner D1 system LDOs
regulator: Mention regulator id in error message about dummy supplies
staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) simplify final return in probe
regulator: devres: fix devm_regulator_get_enable_read_voltage() return
hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
regulator: devres: add API for reference voltage supplies
regulator: rtq2208: Fix LDO discharge register and add vsel setting
regulator: dt-bindings: fixed-regulator: Add a preferred node name
regulator: axp20x: add support for the AXP717
mfd: axp20x: Add support for AXP717 PMIC
dt-bindings: mfd: x-powers,axp152: Document AXP717
regulator: axp20x: fix typo-ed identifier
dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
regulator: pca9450: add pca9451a support
regulator: dt-bindings: pca9450: add pca9451a support
...
|
|
The Allwinner D1 SoC contains two pairs of in-package LDOs. The pair of
"system" LDOs is for general purpose use. LDOA generally powers the
board's 1.8 V rail. LDOB powers the in-package DRAM, where applicable.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240509153107.438220-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define "regulator-[0-9]v[0-9]" as the preferred node name for fixed
regulators. Other suffixes with names are also accepted. Combined,
these make up about half of the existing names in use.
For now this only serves as documentation as the schema still allows
anything to avoid lots of additional warnings for something low priority
to fix. Once a "no deprecated" mode is added to the tools, warnings can
be enabled selectively.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240426215147.3138211-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Merge series from Joy Zou <joy.zou@nxp.com>:
The patchset supports pmic pca9451a.
For the details, please check the patch commit log.
---
Changes in v5:
- adjust gpio@22 to the front of pmic@25.
Changes in v4:
- modify the comment for uSDHC but not i2c.
Changes in v3:
- modify the dts voltags constraints.
- remove unnecessary changes in driver code.
- modify commit message.
- add tag for dt-bindings.
Changes in v2:
- drop old part support.
Joy Zou (3):
regulator: dt-bindings: pca9450: add pca9451a support
regulator: pca9450: add pca9451a support
arm64: dts: imx93-11x11-evk: add pca9451a support
.../regulator/nxp,pca9450-regulator.yaml | 1 +
.../boot/dts/freescale/imx93-11x11-evk.dts | 111 ++++++++++
drivers/regulator/pca9450-regulator.c | 194 +++++++++++++++++-
include/linux/regulator/pca9450.h | 1 +
4 files changed, 305 insertions(+), 2 deletions(-)
--
2.37.1
|
|
The VBUS register block on the PM6150 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://msgid.link/r/20240322-fp4-tcpm-v1-1-c5644099d57b@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update pca9450 bindings.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240318095633.4079027-2-joy.zou@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
|
array bounds
The minimum number of array entries for "gpios-states" was not not
specified, so the the default is the same as the max (8).
The minimum is also missing from "states", and the maximum is also wrong
as it should be 2^(# of GPIO lines). Since there can be 1 to 8 GPIOs,
the "states" range should be 2 to 256.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240224000752.3830665-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These devices are regulators may need to make use of the common
regulator properties, but these are not permitted while only documented
in trivial-devices.yaml
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240223-blabber-obnoxious-353e519541a6@spud
[groeck: Dropped empty line at end of patch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The VBUS register block on the PM4125 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://msgid.link/r/20240221-pm4125-typec-v3-1-fdd0ee0465b8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The VBUS register block on the PM6150 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240217163201.32989-2-danila@jiaxyga.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The VBUS register block on the PMI632 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240130-pmi632-typec-v3-1-b05fe44f0a51@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert devicetree binding mcp16502-regulator.txt to YAML format.
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240201161517.492162-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert TI TPS65132 bindings from .txt to .yaml format.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240104-tps65132-v2-1-6c77fe2f4787@apitzsch.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
to schemas
- Improvements in Samsung GPU schemas
- A few more cases of dropping unneeded quotes in schemas
- Merge QCom idle-states txt binding into common idle-states schema
- Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
Controller
- Add NXP i.mx8dl to SCU PD
- Add synaptics r63353 panel controller
- Clarify the wording around the use of 'wakeup-source' property
- Add a DTS coding style doc
- Add smi vendor prefix
- Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
tree
- Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present
- Fix double free in of_parse_phandle_with_args_map()
- A couple of kerneldoc fixes
* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
of: unittest: Fix of_count_phandle_with_args() expected value message
dt-bindings: fpga: altera: Convert bridge bindings to yaml
dt-bindings: fpga: Convert bridge binding to yaml
dt-bindings: vendor-prefixes: Add smi
dt-bindings: power: Clarify wording for wakeup-source property
of: Fix double free in of_parse_phandle_with_args_map
dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
drivers: of: Fixed kernel doc warning
dt-bindings: tpm: Document Microsoft fTPM bindings
dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
dt-bindings: tpm: Consolidate TCG TIS bindings
dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
dt-bindings: arm: Add remote etm dt-binding
dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
dt-bindings: display: panel: Add synaptics r63353 panel controller
dt-bindings: arm: merge qcom,idle-state with idle-state
dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
...
|
|
Devicetree node names should be generic; fix up the
qcom,usb-vbus-regulator binding example accordingly.
While at it, drop an unnecessary label and add a newline separator
before the child node to improve readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20231219075749.25308-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible for PM8010 RPMH regulators present on sm8550-qrd and
sm8550-mtp boards.
Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://msgid.link/r/20231214-pm8010-regulator-v2-2-82131df6b97b@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231124092121.16866-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series add under-voltage and emergency shutdown for system critical
regulators
|
|
Introduces a new devicetree property to specifies the time window (in
milliseconds) following a critical under-voltage (UV) event during which
less critical actions can be safely carried out by the system.
Less Critical Actions:
- Logging the under-voltage event for later analysis.
- Saving less critical data that may be useful for diagnosing issues or
for audit purposes.
More Critical Actions (post the less critical window):
- Initiating procedures to properly shutdown hardware to prevent damage.
The 'regulator-uv-less-critical-window-ms' property is crucial for
conveying board-specific hardware characteristics, not for enforcing a
certain policy. The time window represented by this property is derived
from the physical attributes of the hardware like the capacity of
on-board capacitors, the power consumption of the components, and the
time needed to safely shut down hardware to prevent damage. These
attributes can significantly vary between different boards, making it a
board-specific property rather than a policy directive.
By providing a precise representation of the time available for less
critical actions post an under-voltage event, this property enables the
kernel to make informed decisions on action prioritization, ensuring
that essential preventative measures are taken to avoid hardware damage
while also allowing for data capture and analysis.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-5-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In certain projects, the main system regulator, composed of simple
components including an under-voltage detector and capacitors, can be
aptly described as a fixed regulator in the device tree. To cater to
such use cases, this patch extends the fixed regulator binding to
support the 'system-critical-regulator' property. This property
signifies that the fixed-regulator is vital for system stability.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-4-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new Device Tree property 'system-critical-regulator' for
marking a regulator as crucial for system stability or functionality.
This helps in distinguishing regulators that are vital for system
operations and may require special handling in under-voltage scenarios.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231026144824.4065145-2-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the pm8937 compatible string and available regulators in
the QCOM SMD RPM regulator documentation.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-6-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for qcom,pm8937-regulators compatible string and add
relevant supplies in QCOM's SPMI regulator documentation.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106-pm8937-v1-4-ec51d9eeec53@riseup.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for LTC2991
- Driver for POWER-Z
Added chip / system support to existing drivers:
- The ina238 driver now also supports INA237
- The asus-ec-sensors driver now supports ROG Crosshair X670E Gene
- The aquacomputer_d5next now supports Aquacomputer High Flow USB and
MPS Flow
- The pmbus/mpq7932 driver now also supports MPQ2286
- The nct6683 now also supports ASRock X670E Taichi
Various other minor improvements and fixes:
- One patch series to call out is the conversion of hwmon platform
drivers to use the platform remove callback returning void"
* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
dt-bindings: hwmon: npcm: Add npcm845 compatible string
hwmon: Add driver for ltc2991
dt-bindings: hwmon: ltc2991: add bindings
hwmon: (pmbus/max31785) Add delay between bus accesses
hwmon: (ina238) add ina237 support
dt-bindings: hwmon: ti,ina2xx: add ti,ina237
hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
hwmon: (max31827) handle vref regulator
hwmon: (ina3221) Add support for channel summation disable
dt-bindings: hwmon: ina3221: Add ti,summation-disable
dt-bindings: hwmon: ina3221: Convert to json-schema
hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
regulator: dt-bindings: Add mps,mpq2286 power-management IC
hwmon: (pmbus/mpq7932) Get page count based on chip info
dt-bindings: hwmon: Add possible new properties to max31827 bindings
hwmon: (max31827) Modify conversion wait time
hwmon: (max31827) Make code cleaner
...
|
|
Document mpq2286 power-management IC.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231011164754.449399-3-saravanan@linumiz.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add PMC8380 compatibles for PMIC found in SC8380XP platform.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231025135550.13162-2-quic_sibis@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add under-voltage interrupt support. This can be used with simple
regulators having no other way to communicate an under-voltage event
except as by toggling some GPIO line.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-4-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck
Converter Device Tree binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/bfd1cf9d620a8229f5a5e62e6fe9e59c153d0830.1698051619.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add ADI MAX77503 buck converter devicetree document.
Signed-off-by: Gokhan Celik <gokhan.celik@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/fb2cb32219eb1a5f85169d6c85cd2c057c5bb4a9.1698000185.git.gokhan.celik@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
29 LDO regulators, not counting ones that feed internally and basically
have no controls. The regulators are named after their intended usage
for the SoC and system design, thus not named generically as ldoX or
dcdcX, but as vcn33 or vgpu.
The differences compared to the MT6358 are minimal:
- Regulators removed: VCAMA1, VCAMA2, VCAMD, VCAMIO, VLDO28
- Regulators added: VM18, VMDDR, VSRAM_CORE
Both PMIC models contain a chip ID register at the same address that
can be used to differentiate the actual model. Thus, even though the
MT6366 is not fully backward compatible with the MT6358, it still falls
back on the MT6358 compatible string. It is up to the implementation
to use the chip ID register as a probing mechanism.
Update the MT6358 regulator binding and add entries for all the MT6366's
regulators and their supplies. The regulator node names follow a cleaned
up style without type prefixes and with underscores replaced with hyphens.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
[wens@chromium.org: major rework and added commit message]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6358 PMIC has various regulator power supply pins that should be
supplied from external power sources or routed from one of its outputs.
Add these regulator supplies to the binding. The names are the actual
names from the datasheet, with hyphens replacing underscores.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MT6358 PMIC allows changing operating modes for the buck regulators,
but not the LDOs. Existing device trees and the Linux implementation
already utilize this through the standard regulator-allowed-modes
property.
The values currently used in existing device trees are simply raw
numbers. The values in the Linux driver are matching numbers defined
with macros denoting the two supported modes. Turns out these two
modes are common across parts of the larger MT63xx PMIC family. The
MT6397 regulator binding already has macros for the two modes, with
matching numbers.
Codify the supported values for regulator-allowed-modes for the MT6358
in the device tree binding: 0 and 1 are supported for buck regulators,
and the property should not be present for LDO regulators. Users should
use the dt-bindings/regulator/mediatek,mt6397-regulator.h header for
the macros, instead of using raw numbers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert this from the old style text based binding to the new DT schema
style. This will make adding the MT6366 portion easier.
The examples have been trimmed down considerably, and the remaining
entries now match what is seen in actual device trees, minus some
properties that aren't covered by the bindings yet, or don't make
sense on their own.
The original submitter seems to have left MediaTek, so instead the
submitter and maintainer for the MT6366 binding is listed as the
maintainer here.
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928085537.3246669-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pma8084-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pma8084-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-5-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pm8019-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8019-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-3-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the qcom,pm8909-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pm8909-regulators compatible).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230912-spmi-pm8909-v1-1-ba4b3bfaf87d@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230925212658.1975419-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
resource name suffix
Add "i", "j", "l", "m" and "n" to the allowed subffix list as they can be
used as RPMh resource name suffixes on new platforms.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230822-topic-sm8x50-upstream-rpmh-regulator-suffix-v2-1-136b315085a4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add aw37503 regulator device-tree binding documentation.
Signed-off-by: Alec Li <like@awinic.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230821035355.1269976-3-like@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add bindings for Richtek RTQ2208 IC controlled SubPMIC
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1691389687-31211-2-git-send-email-alina_yu@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the bindings for Dialog Semiconductor SLG51000 Voltage Regulator
to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230727085434.16596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each regulator node, which references common regulator.yaml schema,
should disallow additional or unevaluated properties. Otherwise
mistakes in properties will go unnoticed.
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Closes: https://git.codelinaro.org/linaro/qcomlt/kernel/-/commit/1c8aeef8a6e84520b77f0c270d99c8bf692c5933
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726074940.121040-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "or" (|) in regular expression must be within parentheses,
otherwise it is not really an "or" and it matches supplies:
qcom-apq8060-dragonboard.dtb: regulators-1: vdd_ncp-supply: [[34]] is not of type 'object'
Fixes: fde0e25b71a9 ("dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725164047.368892-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Regulator supplies are per-device, not per regulator, so they are
expected to be present in device node. Moving them to proper place
allows to simplify a lot, because now none of the regulators differ.
This also fixes dtbs_check warnings like:
rk3368-evb-act8846.dtb: act8846@5a: 'inl1-supply', 'inl2-supply', 'inl3-supply', 'vp1-supply',
'vp2-supply', 'vp3-supply', 'vp4-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725124629.150113-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Regulator names, as specified by regulator-name, are board-dependent and
should describe the name used on the actual board. Do not enforce
generic buck1/2 names.
This also fixes dtbs_check warnings like:
zynqmp-sm-k26-revA.dtb: pmic@33: regulators:buck1:regulator-name:0: 'da9131_buck1' does not match '^BUCK([1-2])$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230725124629.150113-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|