| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Minor changes to the I2C core. Most changes are in drivers:
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations, such as
isolating faulty channels and flushing stuck buses, among others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4"
* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: sprd: Convert to platform remove callback returning void
Documentation: i2c: Document that client auto-detection is a legacy mechanism
i2c: remove redundant condition
i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
i2c: cadence: Add system suspend and resume PM support
i2c: mpc: remove outdated macro
i2c: mpc: use proper binding for transfer timeouts
dt-bindings: i2c: mpc: use proper binding for transfer timeouts
i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
i2c: constify the struct device_type usage
i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
i2c: designware: Use accessors to DW_IC_INTR_MASK register
i2c: designware: Do not enable interrupts shortly in polling mode
i2c: designware: Uniform initialization flow for polling mode
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
i2c: Remove redundant comparison in npcm_i2c_reg_slave
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB budget legacy API was finally documented. It took only 20+ years
to get some documentation about it...
- hantro driver has gained support for STM32MP25 VDEC/VENC
- rkisp1 has gained support for i.MX8MP
- atomisp got rid of two items from its todo list. Still 5 items
pending for moving it out of staging
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
media: rcar-isp: Disallow unbind of devices
media: usbtv: Remove useless locks in usbtv_video_free()
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
media: ttpci: fix two memleaks in budget_av_attach
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
media: usb: s2255: Refactor s2255_get_fx2fw
media: ti: j721e-csi2rx: Convert to platform remove callback returning void
media: stm32-dcmipp: Convert to platform remove callback returning void
media: nxp: imx8-isi: Convert to platform remove callback returning void
media: nuvoton: Convert to platform remove callback returning void
media: chips-media: wave5: Convert to platform remove callback returning void
media: chips-media: wave5: Remove unnecessary semicolons
media: i2c: imx290: Fix IMX920 typo
media: platform: replace of_graph_get_next_endpoint()
media: i2c: replace of_graph_get_next_endpoint()
media: ivsc: csi: Make use of sub-device state
media: ivsc: csi: Swap SINK and SOURCE pads
media: ipu-bridge: Serialise calls to IPU bridge init
...
|
|
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
|
|
Add microchip,sam9x7-pmecc to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223172520.671940-1-varshini.rajendran@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTD2801 Backlight
Fix-ups:
- Fix include lists; alphabetise, remove unused, explicitly add used
- Device Tree binding adaptions/conversions/creation
- Use dev_err_probe() to clean-up error paths
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
Bug Fixes:
- Fix changes of NULL pointer dereference
- Remedy a bunch of logic errors
- Initialise (zero) Backlight properties data structures"
* tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
backlight: pandora_bl: Drop unneeded ENOMEM error message
backlight: lm3630a_bl: Simplify probe return on gpio request error
backlight: lm3630a_bl: Handle deferred probe
backlight: as3711_bl: Handle deferred probe
backlight: bd6107: Handle deferred probe
backlight: l4f00242t03: Simplify with dev_err_probe()
backlight: gpio: Simplify with dev_err_probe()
backlight: lp8788: Fully initialize backlight_properties during probe
backlight: lm3639: Fully initialize backlight_properties during probe
backlight: da9052: Fully initialize backlight_properties during probe
backlight: lm3630a: Use backlight_get_brightness helper in update_status
backlight: lm3630a: Don't set bl->props.brightness in get_brightness
backlight: lm3630a: Initialize backlight_properties on init
backlight: mp3309c: Fully initialize backlight_properties during probe
backlight: mp3309c: Utilise temporary variable for struct device
backlight: mp3309c: Use dev_err_probe() instead of dev_err()
backlight: mp3309c: Make use of device properties
dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
backlight: hx8357: Utilise temporary variable for struct device
backlight: hx8357: Make use of dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- New driver for GPIO based 7-segment LED display (Chris Packham)
- New driver for Maxim MAX6958/6959 I²C 7-segment LED display
controller
- Refactor linedisp library to make the above happen
- Update Holtek HT16k33 driver to follow the linedisp refactoring
- Convert .remove to return void in platform drivers (Uwe Kleine-König)
- Fix DT schemas (Krzysztof Kozlowski)
- Refresh MAINTAINERS database
* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
auxdisplay: hd44780: Convert to platform remove callback returning void
auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
auxdisplay: seg-led-gpio: Import linedisp namespace
dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
auxdisplay: Add 7-segment LED display driver
auxdisplay: Add driver for MAX695x 7-segment LED controllers
dt-bindings: auxdisplay: Add Maxim MAX6958/6959
auxdisplay: ht16k33: Drop struct ht16k33_seg
auxdisplay: ht16k33: Switch to use line display character mapping
auxdisplay: ht16k33: Define a few helper macros
auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
auxdisplay: ht16k33: Add default to switch-cases
auxdisplay: linedisp: Allocate buffer for the string
auxdisplay: linedisp: Add support for overriding character mapping
auxdisplay: linedisp: Provide struct linedisp_ops for future extension
auxdisplay: linedisp: Move exported symbols to a namespace
auxdisplay: linedisp: Add missing header(s)
auxdisplay: linedisp: Unshadow error codes in ->store()
auxdisplay: linedisp: Use unique number for id
...
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
|
|
'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
|
|
'clk-microchip' into clk-next
* clk-remove:
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
* clk-amlogic:
clk: meson: Add missing clocks to axg_clk_regmaps
* clk-qcom: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
* clk-parent:
clk: Fix clk_core_get NULL dereference
* clk-microchip:
clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
clk: microchip: mpfs: add missing MSSPLL outputs
clk: microchip: mpfs: setup for using other mss pll outputs
clk: microchip: mpfs: split MSSPLL in two
dt-bindings: can: mpfs: add missing required clock
dt-bindings: clock: mpfs: add more MSSPLL output definitions
|
|
'clk-allwinner' into clk-next
* clk-aspeed:
clk: ast2600: Add FSI parent clock with correct rate
dt-bindings: clock: ast2600: Add FSI clock
* clk-keystone:
clk: keystone: sci-clk: Adding support for non contiguous clocks
* clk-mobileye:
dt-bindings: reset: mobileye,eyeq5-reset: add bindings
dt-bindings: clock: mobileye,eyeq5-clk: add bindings
clk: fixed-factor: add fwname-based constructor functions
clk: fixed-factor: add optional accuracy support
* clk-allwinner:
clk: sunxi: usb: fix kernel-doc warnings
clk: sunxi: sun9i-cpus: fix kernel-doc warnings
clk: sunxi: a20-gmac: fix kernel-doc warnings
|
|
and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Fix some static checker errors in the hisilicon clk driver
* clk-renesas: (25 commits)
clk: renesas: r8a779h0: Add RPC-IF clock
clk: renesas: r8a779h0: Add SYS-DMAC clocks
clk: renesas: r8a779h0: Add SDHI clock
clk: renesas: r8a779h0: Add EtherAVB clocks
clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
...
* clk-cleanup:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: ti: dpll3xxx: use correct function names in kernel-doc
clk: clocking-wizard: Remove redundant initialization of pointer div_addr
clk: keystone: sci-clk: match func name comment to actual
clk: cdce925: Remove redundant assignment to variable 'rate'
MAINTAINERS: drop Sekhar Nori
* clk-hisilicon:
clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: mediatek: add infracfg reset controller for mt7988
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
* clk-bulk:
clk: Provide managed helper to get and enable bulk clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Small bug fixes and device tree updates. No new features"
* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis_i2c: Add compatible string nuvoton,npct75x
tpm_tis: Add compatible string atmel,at97sc3204
tpm_tis_spi: Add compatible string atmel,attpm20p
dt-bindings: tpm: Add compatible string atmel,attpm20p
tpm,tpm_tis: Avoid warning splat at shutdown
tpm/tpm_ftpm_tee: fix all kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The biggest feature is the locking overhaul. Up until now the
synchronization in the GPIO subsystem was broken. There was a single
spinlock "protecting" multiple data structures but doing it wrong (as
evidenced by several places where it would be released when a sleeping
function was called and then reacquired without checking the protected
state).
We tried to use an RW semaphore before but the main issue with GPIO is
that we have drivers implementing the interfaces in both sleeping and
non-sleeping ways as well as user-facing interfaces that can be called
both from process as well as atomic contexts. Both ends converge in
the same code paths that can use neither spinlocks nor mutexes. The
only reasonable way out is to use SRCU and go mostly lockless. To that
end: we add several SRCU structs in relevant places and use them to
assure consistency between API calls together with atomic reads and
writes of GPIO descriptor flags where it makes sense.
This code has spent several weeks in next and has received several
fixes in the first week or two after which it stabilized nicely. The
GPIO subsystem is now resilient to providers being suddenly unbound.
We managed to also remove the existing character device RW semaphore
and the obsolete global spinlock.
Other than the locking rework we have one new driver (for Chromebook
EC), much appreciated documentation improvements from Kent and the
regular driver improvements, DT-bindings updates and GPIOLIB core
tweaks.
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to
GPIO device structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being
unbound while the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the
information we need can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to
struct gpio_device to further reduce the need to dereference the
former
- pass the GPIO device struct instead of the GPIO chip to sysfs
callback to, again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for
the same reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones
that are requested
- remove leftover typedefs
- pass the consumer device to GPIO core in
devm_fwnode_gpiod_get_index() for improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by
users as we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO
subsystem
- set the device type (assign the relevant struct device_type) for
GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it
in menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of
hard-coding it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add
lockdep asserts to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest
replacements
Other:
- remove an obsolete test from selftests"
* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: sysfs: repair export returning -EPERM on 1st attempt
selftest: gpio: remove obsolete gpio-mockup test
gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
gpio: of: Make of_gpio_get_count() take firmware node as a parameter
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
gpio: sim: use for_each_hwgpio()
gpio: provide for_each_hwgpio()
gpio: don't warn about removing GPIO chips with active users anymore
gpio: sim: delimit the fwnode name with a ":" when generating labels
gpio: sim: add lockdep asserts
gpio: Add ChromeOS EC GPIO driver
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
gpio: fix memory leak in gpiod_request_commit()
gpio: constify opaque pointer "data" in gpio_device_find()
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
gpio: uapi: clarify default_values being logical
gpio: sysfs: fix inverted pointer logic
gpio: don't let lockdep complain about inherently dangerous RCU usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, mostly cleanups, API updates and
simple device additions. I messed up slightly and there are a couple
of duplicated commits resulting from me leaving things in my inbox
which didn't seem worth removing by the time I noticed them.
- Conversion of several drivers to GPIO descriptors
- Build out the features of of the MP8859 driver
- Support for Qualcomm PM4125 and PM6150"
* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
regulator: core: make regulator_class constant
regulator: da9121: Remove unused of_gpio.h
regulator: userspace-consumer: add module device table
regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
regulator: mp8859: Implement set_current_limit()
regulator: mp8859: Report slew rate
regulator: mp8859: Support status and error readback
regulator: mp8859: Support active discharge control
regulator: mp8859: Support mode operations
regulator: mp8859: Support enable control
regulator: mp8859: Validate and log device identifier information
regulator: mp8859: Specify register accessibility and enable caching
regulator: max8998: Convert to GPIO descriptors
regulator: max8997: Convert to GPIO descriptors
regulator: lp8788-buck: Fully convert to GPIO descriptors
regulator: da9055: Fully convert to GPIO descriptors
regulator: max8973: Finalize switch to GPIO descriptors
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()"
* tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits)
mmc: core: make mmc_host_class constant
mmc: core: Fix switch on gp3 partition
mmc: tmio: comment the ERR_PTR usage in this driver
mmc: mmc_spi: Don't mention DMA direction
mmc: dw_mmc: Remove unused of_gpio.h
mmc: dw_mmc: add support for hi3798mv200
dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS()
mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
mmc: tmio: avoid concurrent runs of mmc_request_done()
dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
mmc: sh_mmcif: Advance sg_miter before reading blocks
mmc: sh_mmcif: sg_miter must not be atomic
mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic
dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
mmc: core: constify the struct device_type usage
mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate
files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350,
SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski)
- Allow 'required-opps' DT property for SoCs that require a minimum
performance level for the power domain (Johan Hovold)
- Remove requirement for 'msi-map-mask' DT property since it depends on how
MSIs are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because their PHY
configuration isn't tuned for L0s, which results in many Correctable
Errors (Johan Hovold)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add DT binding and driver support for X1E80100 (Abel Vesa)
* pci/controller/qcom:
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema
dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8180x: Move SC8180X to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations,
such as isolating faulty channels and flushing stuck buses, among
others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4.
|
|
Commit 4f2a348aa365 ("arm64: dts: imx8mm-venice-gw73xx: add TPM device")
added a devicetree node for the Trusted Platform Module on certain
Gateworks boards.
The commit only used the generic "tcg,tpm_tis-spi" compatible string,
but public documentation shows that the chip is an ATTPM20P from Atmel
(nowadays Microchip):
https://trac.gateworks.com/wiki/tpm
Add the chip to the supported compatible strings of the TPM TIS SPI
schema.
For reference, a datasheet is available at:
https://ww1.microchip.com/downloads/en/DeviceDoc/ATTPM20P-Trusted-Platform-Module-TPM-2.0-SPI-Interface-Summary-Data-Sheet-DS40002082A.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm
Merge OPP (operating performance points) updates for 6.9 from Viresh
Kumar:
"- Fix couple of warnings related to W=1 builds. (Viresh Kumar).
- Move Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg)."
* tag 'opp-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
|
|
With recent changes within matrix dimensions calculation,
dropping maxItems: 1 provides a warning-free run.
Fixes warning such as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dtb: opp-table: opp-200000000:opp-hz:0: [200000000, 0, 0, 150000000, 0, 0, 0, 0, 300000000] is too long
Fixes: 3cb16ad69bef ("dt-bindings: opp: accept array of frequencies")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add i.MX95 Generic, Secure Enclave and V2X Message Unit compatible string.
And the MUs in AONMIX has internal RAMs for SCMI shared buffer usage.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add dedicated schema for the PCIe controllers found on X1E80100.
Link: https://lore.kernel.org/linux-pci/20240301-x1e80100-pci-v4-1-7ab7e281d647@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Use compatible name "qcom,sm4450-tlmm" instead of "qcom,sm4450-pinctrl"
to match the compatible name in sm4450 pinctrl driver.
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240129092512.23602-2-quic_tengfan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Half of them are HD-audio quirks while
the rest are various device-specific ASoC fixes"
* tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook
ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table
ASoC: rcar: adg: correct TIMSEL setting for SSI9
ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA
ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P
ALSA: hda/realtek - Add Headset Mic supported Acer NB platform
ALSA: hda: optimize the probe codec process
ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
ASoC: madera: Fix typo in madera_set_fll_clks shift value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whether the 'msi-map-mask' property is needed or not depends on how the
MSI interrupts are mapped and it should therefore not be described as
required.
Note that the current schema fails to detect omissions of the mask
property if the internal MSI controller properties are also present.
Link: https://lore.kernel.org/r/20240306095651.4551-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Some Qualcomm SoCs require a minimum performance level for the power
domain so add 'required-opps' to the binding.
Link: https://lore.kernel.org/r/20240306095651.4551-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
