summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22Merge tag 'net-next-6.3' of ↵Linus Torvalds41-275/+736
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-22Merge tag 'v6.3-p1' of ↵Linus Torvalds5-9/+188
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ...
2023-02-21Merge tag 'thermal-6.3-rc1' of ↵Linus Torvalds4-10/+289
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
2023-02-21Merge tag 'pm-6.3-rc1' of ↵Linus Torvalds4-29/+79
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ...
2023-02-21Merge tag 'timers-core-2023-02-20' of ↵Linus Torvalds4-0/+62
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for timekeeping, timers and clockevent/source drivers: Core: - Yet another round of improvements to make the clocksource watchdog more robust: - Relax the clocksource-watchdog skew criteria to match the NTP criteria. - Temporarily skip the watchdog when high memory latencies are detected which can lead to false-positives. - Provide an option to enable TSC skew detection even on systems where TSC is marked as reliable. Sigh! - Initialize the restart block in the nanosleep syscalls to be directed to the no restart function instead of doing a partial setup on entry. This prevents an erroneous restart_syscall() invocation from corrupting user space data. While such a situation is clearly a user space bug, preventing this is a correctness issue and caters to the least suprise principle. - Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout() to align it with the nanosleep semantics. Drivers: - The obligatory new driver bindings for Mediatek, Rockchip and RISC-V variants. - Add support for the C3STOP misfeature to the RISC-V timer to handle the case where the timer stops in deeper idle state. - Set up a static key in the RISC-V timer correctly before first use. - The usual small improvements and fixes all over the place" * tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ clocksource/drivers/em_sti: Mark driver as non-removable clocksource/drivers/sh_tmu: Mark driver as non-removable clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use clocksource/drivers/timer-microchip-pit64b: Add delay timer clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx dt-bindings: timer: mediatek,mtk-timer: add MT8365 clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback clocksource/drivers/sh_cmt: Mark driver as non-removable clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST clocksource/drivers/riscv: Increase the clock source rating clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT dt-bindings: timer: Add bindings for the RISC-V timer device RISC-V: time: initialize hrtimer based broadcast clock event device dt-bindings: timer: rk-timer: Add rktimer for rv1126 time/debug: Fix memory leak with using debugfs_lookup() clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime() clocksource: Verify HPET and PMTMR when TSC unverified ...
2023-02-21Merge tag 'edac_updates_for_v6.3' of ↵Linus Torvalds1-0/+45
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add a driver for the RAS functionality on Xilinx's on chip memory controller - Add support for decoding errors from the first and second level memory on SKL-based hardware - Add support for the memory controllers in Intel Granite Rapids and Emerald Rapids machines - First round of amd64_edac driver simplification and removal of unneeded functionality - The usual cleanups and fixes * tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive EDAC/amd64: Remove early_channel_count() EDAC/amd64: Remove PCI Function 0 EDAC/amd64: Remove PCI Function 6 EDAC/amd64: Remove scrub rate control for Family 17h and later EDAC/amd64: Don't set up EDAC PCI control on Family 17h+ EDAC/i10nm: Add driver decoder for Sapphire Rapids server EDAC/i10nm: Add Intel Granite Rapids server support EDAC/i10nm: Make more configurations CPU model specific EDAC/i10nm: Add Intel Emerald Rapids server support EDAC/skx_common: Delete duplicated and unreachable code EDAC/skx_common: Enable EDAC support for the "near" memory EDAC/qcom: Add platform_device_id table for module autoloading EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
2023-02-21Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds35-57/+1104
Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ...
2023-02-21Merge tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-14/+57
Pull ARM SoC updates from Arnd Bergmann: "The majority of the changes are for the OMAP2 platform, mostly removing some dead code that got left behind from previous cleanups. Aside from that, there are very minor updates and correctness fixes for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1" * tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) dt-bindings: soc: samsung: exynos-pmu: allow phys as child ARM: imx: mach-imx6ul: add imx6ulz support ARM: imx: Call ida_simple_remove() for ida_simple_get arm64: drop redundant "ARMv8" from Kconfig option title ARM: ep93xx: Convert to use descriptors for GPIO LEDs ARM: s3c: fix s3c64xx_set_timer_source prototype ARM: OMAP2+: Fix spelling typos in comment ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h> ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h> ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() ARM: BCM63xx: remove useless goto statement ARM: omap2: make functions static ARM: omap2: remove unused omap2_pm_init ARM: omap2: remove unused declarations ARM: omap2: remove unused functions ARM: omap2: smartreflex: remove on_init control ARM: omap2: remove APLL control ARM: omap2: simplify clock2xxx header ARM: omap2: remove unused omap_hwmod_reset.c ARM: omap2: remove unused headers ...
2023-02-21Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds5-248/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
2023-02-17dt-bindings: riscv: correct starfive visionfive 2 compatiblesConor Dooley1-2/+2
Using "va" and "vb" doesn't match what's written on the board, or the communications from StarFive. Switching to using the silkscreened version number will ease confusion & the risk of another spin of the board containing a "conflicting" version identifier. As the binding has not made it into mainline yet, take the opportunity to "correct" things. Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/linux-riscv/Y+4AxDSDLyL1WAqh@wendy/ Fixes: 97b7ed072784 ("dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230216131511.3327943-1-conor.dooley@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-17Merge tag 'socfpga_dts_updates_for_v6.3_part2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA dts updates for v6.3, part 2 - Add support for the enclustra PE1 board that is based on Arria10 * tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-16Merge tag 'wireless-next-2023-03-16' of ↵Jakub Kicinski7-55/+54
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * EHT channel puncturing support (client & AP) * some support for AP MLD without mac80211 * fixes for A-MSDU on mesh connections Major driver changes: iwlwifi * EHT rate reporting * Bump FW API to 74 for AX devices * STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware mt76 * switch to using page pool allocator * mt7996 EHT (Wi-Fi 7) support * Wireless Ethernet Dispatch (WED) reset support libertas * WPS enrollee support brcmfmac * Rename Cypress 89459 to BCM4355 * BCM4355 and BCM4377 support mwifiex * SD8978 chipset support rtl8xxxu * LED support ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table * tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: brcmfmac: p2p: Introduce generic flexible array frame member wifi: mac80211: add documentation for amsdu_mesh_control wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description wifi: mac80211: always initialize link_sta with sta wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() wifi: cfg80211: Set SSID if it is not already set wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status() wifi: rtw88: usb: drop now unnecessary URB size check wifi: rtw88: usb: send Zero length packets if necessary wifi: rtw88: usb: Set qsel correctly wifi: mac80211: fix off-by-one link setting wifi: mac80211: Fix for Rx fragmented action frames wifi: mac80211: avoid u32_encode_bits() warning wifi: mac80211: Don't translate MLD addresses for multicast wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify wifi: nl80211: Allow authentication frames and set keys on NAN interface wifi: mac80211: fix non-MLO station association wifi: mac80211: Allow NSS change only up to capability ... ==================== Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16dt-bindings: altera: Add enclustra mercury PE1Steffen Trumtrar1-0/+1
Add binding for the enclustra PE1 baseboard from enclustra GmbH. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2023-02-16dt-bindings: net: snps,dwmac: Fix snps,reset-delays-us dependencyAndrew Halaney1-1/+1
The schema had snps,reset-delay-us as dependent on snps,reset-gpio. The actual property is called snps,reset-delays-us, so fix this to catch any devicetree defining snsps,reset-delays-us without snps,reset-gpio. Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230214171505.224602-1-ahalaney@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15Merge branches 'powercap', 'pm-domains', 'pm-em' and 'pm-opp'Rafael J. Wysocki2-1/+5
Merge updates of the powercap framework, generic PM domains, Energy Model and operating performance points for 6.3-rc1: - Fix possible name leak in powercap_register_zone() (Yang Yingliang). - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui). - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada). - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui). - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman). - Add missing 'cache-unified' property in example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Remove "select SRCU" (Paul E. McKenney). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio). * powercap: powercap: intel_rapl: Fix handling for large time window powercap: idle_inject: Support 100% idle injection powercap: intel_rapl: add support for Emerald Rapids powercap: intel_rapl: add support for Meteor Lake powercap: fix possible name leak in powercap_register_zone() * pm-domains: PM: domains: fix memory leak with using debugfs_lookup() * pm-em: PM: EM: fix memory leak with using debugfs_lookup() * pm-opp: OPP: fix error checking in opp_migrate_dentry() dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array drivers/opp: Remove "select SRCU" dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
2023-02-15dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 supportGeert Uytterhoeven1-0/+3
Document support for the Thermal Sensor/Chip Internal Voltage Monitor/Core Voltage Monitor (THS/CIVM/CVM) on the Renesas R-Car V4H (R8A779G0) SoC. Unlike most other R-Car Gen3 and Gen4 SoCs, it has 4 instead of 3 sensors, so increase the maximum number of reg tuples. Just like other R-Car Gen4 SoCs, interrupts are not routed to the INTC-AP but to the ECM. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/11f740522ec479011cc8eef6bb450603be394def.1675958665.git.geert+renesas@glider.be Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-15dt-bindings: thermal: mediatek: Add LVTS thermal controllersBalsam CHIHI1-0/+142
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195. Signed-off-by: Balsam CHIHI <bchihi@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-14Merge tag 'opp-updates-6.3' of ↵Rafael J. Wysocki2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) updates for 6.3 from Viresh Kumar: "- Add missing 'cache-unified' property in example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Remove "select SRCU" (Paul E. McKenney). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio)." * tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: fix error checking in opp_migrate_dentry() dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array drivers/opp: Remove "select SRCU" dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
2023-02-14Merge tag 'cpufreq-arm-updates-6.3' of ↵Rafael J. Wysocki3-28/+74
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM updates for 6.3 from Viresh Kumar: "- Enable thermal cooling for Tegra194 (Yi-Wei Wang). - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss). - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi)." * tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles cpufreq: mediatek-hw: Register to module device table cpufreq: tegra194: Enable CPUFREQ thermal cooling
2023-02-14dt-bindings: net: dsa: mediatek,mt7530: improve binding descriptionArınç ÜNAL1-31/+21
Fix inaccurate information about PHY muxing, and merge standalone and multi-chip module MT7530 configuration methods. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-14dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximumChristian Marangi1-3/+13
Enlarge opp-supported-hw maximum value. In recent SoC we started matching more bit and we currently match mask of 112. The old maximum of 7 was good for old SoC that didn't had complex id, but now this is limiting and we need to enlarge it to support more variants. Document all the various mask that can be used and limit them to only reasonable values instead of using a generic maximum limit. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-02-14dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optionalChristian Marangi1-30/+44
The qcom-cpufreq-nvmem driver supports 2 kind of devices: - pre-cpr that doesn't have power-domains and base everything on nvmem cells and multiple named microvolt bindings. Doesn't need required-opp binding in the opp nodes as they are only used for genpd based devices. - cpr-based that require power-domain in the cpu nodes and use various source to decide the correct voltage and freq Require required-opp binding since they need to be linked to the related opp-level. When the schema was introduced, it was wrongly set to always require these binding but this is not the case for pre-cpr devices. Make the power-domain and the required-opp optional and set them required only for qcs404 based devices. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-02-14dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tablesChristian Marangi1-9/+26
Add additional info on what opp tables the defined devices in this schema supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level) and reference them. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-02-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo1-0/+1
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
2023-02-13wifi: mwifiex: Support SD8978 chipsetLukas Wunner1-1/+3
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de
2023-02-13dt-bindings: net: wireless: minor whitespace and name cleanupsKrzysztof Kozlowski6-54/+50
Minor cleanups: - Drop redundant blank lines, - Correct indentaion in examples, - Correct node names in examples to drop underscore and use generic name. No functional impact except adjusting to preferred coding style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230118175413.360153-1-krzysztof.kozlowski@linaro.org
2023-02-13Merge tag 'qcom-arm64-for-6.3-2' of ↵Arnd Bergmann3-0/+170
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm ARM64 DT updates for 6.3 The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on these are introduced. New support for a couple of USB modem sticks from THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro SKU of the Herobrine device. The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths for UFS are also described. A few fixes related to the power-grid of herobrine, on SC7280, are introduced. QFPROM is introduced on IPQ8074 and Interconnect providers are added for SDM670. On SDM845 the duplicated wcd9340 audio coded description is moved from devices to a common file, audio devices are added to the OnePlus 6 and 6T. On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the platform is switched to use #address/size-cells of 2, in line with most other platforms. Camera control interface and clock controllers are added for SM6350, and the CCI interface is enabled on the Fairphone FP4. On SM8350 the interconnect reference of SDHCI controller is corrected, DSI1 PHY clocks are properly described as sources for the Display clock controller and DSI1 is wired up to the display controller. The firmware paths are corrected for the Sony Xperia Nagara platform. The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the SM8550 platform. Additionally a few small typos/errors are corrected. gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a range of DT validation issues are corrected. * tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits) arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly arm64: dts: qcom: pmk8550: fix PON compatible arm64: dts: qcom: sm8550: fix DSI controller compatible arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators arm64: dts: qcom: sm6115: correct TLMM gpio-ranges arm64: dts: qcom: msm8953: correct TLMM gpio-ranges arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings arm64: dts: qcom: sm6350: Use specific qmpphy compatible arm64: dts: qcom: sm6115: Add smp2p nodes arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses arm64: dts: qcom: sm6350: Add CCI nodes arm64: dts: qcom: sm6350: Add camera clock controller dt-bindings: clock: add QCOM SM6350 camera clock bindings ... Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13Merge tag 'qcom-dts-for-6.3-2' of ↵Arnd Bergmann2-0/+18
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm ARM32 DTS updates for 6.3 This adds backlight, notification LED, vibrator, volume keys and hall sensor to the OnePlus One, and provides a range of Devicetree validation fixes across various platforms. * tag 'qcom-dts-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits) ARM: dts: qcom: align OPP table names with DT schema ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator ARM: dts: qcom: pm8941: Add vibrator node ARM: dts: qcom: sdx55: correct TLMM gpio-ranges dt-bindings: arm: qcom: add the sa8775p-ride board ARM: dts: qcom: apq8064: add second DSI host and PHY ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish) ARM: dts: qcom-sdx65: align RPMh regulator nodes with bindings ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings ARM: dts: qcom: use "okay" for status ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node dt-bindings: qcom: Document msm8916-thwc-uf896 and ufi001c ... Link: https://lore.kernel.org/r/20230210185846.2032601-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-13dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xxIcenowy Zheng1-0/+8
T-Head C906/C910 CLINT is not compliant to SiFive ones (and even not compliant to the newcoming ACLINT spec) because of lack of mtime register. Add a compatible string formatted like the C9xx-specific PLIC compatible, and do not allow a SiFive one as fallback because they're not really compliant. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230202072814.319903-1-uwu@icenowy.me Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-13dt-bindings: timer: mediatek,mtk-timer: add MT8365Bernhard Rosenkränzer1-0/+1
Add binding description for mediatek,mt8365-systimer Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230125143503.1015424-8-bero@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-02-13dt-bindings: timer: Add bindings for the RISC-V timer deviceAnup Patel1-0/+52
We add DT bindings for a separate RISC-V timer DT node which can be used to describe implementation specific behaviour (such as timer interrupt not triggered during non-retentive suspend). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230103141102.772228-3-apatel@ventanamicro.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-02-13dt-bindings: timer: rk-timer: Add rktimer for rv1126Jagan Teki1-0/+1
Add rockchip timer compatible string for rockchip rv1126. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221123183124.6911-3-jagan@edgeble.ai Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-1/+8
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09Merge tag 'at91-dt-6.3-2' of ↵Arnd Bergmann1-2/+4
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 device tree updates for 6.3 #2 It contains: - cleanups arround flexcom nodes on SAM9X60 SoC as follows: - preserve same ID for flexcoms and the embedded nodes (e.g. flx4 will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3); - SoC specific bindings were moved from board specific file to SoC specific file - DMA bindings for all flexcom nodes were added - SoC file was filled with missing flexcom nodes - new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface, 1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power regulators, UART and JTAG connectors * tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60: Add missing flexcom definitions ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: fix spi4 node ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09Merge tag 'aspeed-6.3-devicetree' of ↵Arnd Bergmann2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 6.3 - New machines * Ufispace NCPLite AST2600 BMC * Facebook Greatlakes AST2600 BMC - Updates for ethanolx, bletchley and tyan s8036 * tag 'aspeed-6.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: p10bmc: Enable UART2 ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC dt-bindings: arm: aspeed: document Ufispace NCPLite BMC dt-bindings: vendor-prefixes: Add prefix for Ufi Space arm: dts: aspeed: tyan s8036: Enable kcs interrupts ARM: dts: aspeed: bletchley: Enable wdtrst1 ARM: dts: aspeed: bletchley: Rename flash1 label ARM: dts: aspeed: ethanolx: Add BIOS flash chip ARM: dts: aspeed: ethanolx: Enable CTS/RTS pins on UART1 ARM: dts: aspeed: ethanolx: Add label for the master partition ARM: dts: aspeed: ethanolx: Correct EEPROM device name ARM: dts: aspeed: ethanolx: Enable VUART ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC dt-bindings: arm: aspeed: add Facebook Greatlakes board Link: https://lore.kernel.org/r/CACPK8XdbffU5yRSZF-zR2xv-+6aJK+hEXP8TOkW=SvS+nNTGxg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-09Merge branch '20221213152617.296426-1-konrad.dybcio@linaro.org' into HEADBjorn Andersson1-0/+49
Merge DT binding to gain Camera clock defines for SM6350
2023-02-09dt-bindings: clock: add QCOM SM6350 camera clock bindingsKonrad Dybcio1-0/+49
Add device tree bindings for camera clock controller for Qualcomm Technology Inc's SM6350 SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
2023-02-09dt-bindings: arm: qcom: add the sa8775p-ride boardBartosz Golaszewski1-0/+7
Document the sa8775p SoC and its reference board: sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201152038.203387-5-brgl@bgdev.pl
2023-02-09dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)Jianhua Lu1-0/+1
Add a compatible for Xiaomi Mi Pad 5 Pro. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230131123515.833-1-lujianhua000@gmail.com
2023-02-09dt-bindings: qcom: Document msm8916-thwc-uf896 and ufi001cYang Xiwen1-0/+2
Document the new thwc,uf896/ufi001c device tree bindings used in their device trees. Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-02-09dt-bindings: vendor-prefixes: add thwcYang Xiwen1-0/+2
Shenzhen Tong Heng Wei Chuang Technology Co., Ltd. (hereinafter referred to as "Tong Heng Wei Chuang") is a focus on wireless communications equipment brand manufacturers. Link: http://www.szthwc.com/en/about.html Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-02-08dt-bindings: arm: at91: Add info on sam9x60 curiosityDurai Manickam KR1-2/+4
Adding the sam9x60 curiosity board from Microchip into the atmel AT91 board description yaml file. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230207110651.197268-8-durai.manickamkr@microchip.com
2023-02-08dt-bindings: net: micrel-ksz90x1.txt: Update for lan8841Horatiu Vultur1-0/+1
The lan8841 has the same bindings as ksz9131, so just reuse the entire section of ksz9131. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-08Merge tag 'devicetree-fixes-for-6.2-2' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of multiple OF framebuffer devices - Fix booting on Socionext Synquacer with bad 'dma-ranges' entries - Add DT binding .yamllint to .gitignore * tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property dt-bindings: Fix .gitignore of/address: Return an error when no valid dma-ranges are found of: Make OF framebuffer device names unique
2023-02-07Merge tag 'linux-can-next-for-6.3-20230206' of ↵Paolo Abeni1-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-02-06 this is a pull request of 47 patches for net-next/master. The first two patch is by Oliver Hartkopp. One adds missing error checking to the CAN_GW protocol, the other adds a missing CAN address family check to the CAN ISO TP protocol. Thomas Kopp contributes a performance optimization to the mcp251xfd driver. The next 11 patches are by Geert Uytterhoeven and add support for R-Car V4H systems to the rcar_canfd driver. Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb driver, which add support for configurable CAN channel ID. The last 17 patches are by me and target the CAN bit timing configuration. The bit timing is cleaned up, error messages are improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead of netdev_err(), and the SJW handling is updated, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. * tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits) can: bittiming: can_validate_bitrate(): report error via netlink can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT() can: bittiming: can_calc_bittiming(): clean up SJW handling can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment can: bittiming: can_sjw_check(): report error via netlink and harmonize error value can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value can: bittiming: factor out can_sjw_set_default() and can_sjw_check() can: bittiming: can_changelink() pass extack down callstack can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT() can: netlink: can_validate(): validate sample point for CAN and CAN-FD can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided can: dev: register_candev(): ensure that bittiming const are valid can: bittiming: can_get_bittiming(): use direct return and remove unneeded else can: bittiming: can_fixup_bittiming(): set effective tq can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1 can: bittiming(): replace open coded variants of can_bit_time() can: peak_usb: Reorder include directives alphabetically can: peak_usb: align CAN channel ID format in log with sysfs attribute can: peak_usb: export PCAN CAN channel ID as sysfs device attribute ... ==================== Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-06Merge tag 'ti-k3-dt-for-v6.3' of ↵Arnd Bergmann1-0/+15
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt TI K3 device tree updates for v6.3 New features: J784S4 SoC and EVM support AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2 AM62A7 SK additional peripherals AM62 SK USB support Non critical fixes AM62: McSPI Clock ID fixes MMC TAP value updates J7200: pinmux range update All: Cache DT node fixes Cleanups: Reorder dts Makefile entries alphabetically * tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits) arm64: dts: ti: Makefile: Rearrange entries alphabetically arch: arm64: dts: Add support for AM69 Starter Kit dt-bindings: arm: ti: Add binding for AM69 Starter Kit arm64: dts: ti: iot2050: Add support for M.2 variant dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant arm64: dts: ti: iot2050: Add layout of OSPI flash arm64: dts: ti: k3-j7200: Fix wakeup pinmux range arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board arm64: dts: ti: Add initial support for AM68 SK System on Module dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: Update cache properties for ti arm64: dts: ti: Add support for phyBOARD-Electra-AM642 dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware arm64: dts: ti: k3-am62a7-sk: Enable USB1 node arm64: dts: ti: k3-am62a7-sk: Enable ethernet port arm64: dts: ti: k3-am62a-main: Add more peripheral nodes arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals arm64: dts: ti: Add support for J784S4 EVM board arm64: dts: ti: Add initial support for J784S4 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4 ... Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-06dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatibleAbel Vesa1-0/+1
Add compatible for EPSS CPUFREQ-HW on SM8550. Also document the interrupts. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-02-06dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatiblesLuca Weiss1-0/+4
Document the cpufreq-epss compatibles currently used in the tree, plus the sc7280 which will be added in a separate commit. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-02-05Merge tag 'rtc-6.2-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Here are a few fixes for 6.2. The EFI one is the most important as it allows some RTCs to actually work. The other two are warnings that are worth fixing. - efi: make WAKEUP services optional - sunplus: fix format string warning" * tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: sunplus: fix format string for printing resource dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property rtc: efi: Enable SET/GET WAKEUP services as optional
2023-02-04dt-bindings: arm: qcom: Document the sc7280 CRD Pro boardsRajendra Nayak1-0/+6
Add compatibles for the Pro SKU of the sc7280 CRD boards which come with a Pro variant of the qcard. The Pro qcard variant has smps9 from pm8350c ganged up with smps7 and smps8. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-1-quic_rjendra@quicinc.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-15 16:30:55 +0300