summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2019-06-09dt-bindings: doc: net: keystone-netcp: document cptsGrygorii Strashko1-0/+44
The Keystone 2 66AK2HK/E/L 1G Ethernet Switch Subsystems contains The Common Platform Time Sync (CPTS) module which is in general compatible with CPTS module found on "legacy" TI AM3/4/5 SoCs. So, the basic support for Keystone 2 CPTS is available by default, but not documented. The Keystone 2 CPTS module supports also some additional features like time sync reference (RFTCLK) clock selection through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module, which is modelled as multiplexer clock. This patch adds missed binding documentation for Keystone 2 66AK2HK/E/L CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: document axistream-connected attributeRobert Hancock1-4/+15
The axienet driver requires the use of an axistream-connected attribute, but this isn't documented in the devicetree bindings. Document how this attribute is supposed to be used, including the upcoming change to make the usage of this attribute optional. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: document device tree mdio child nodeRobert Hancock1-0/+3
The mdio child node for the MDIO bus is generally required when using this driver but was not documented other than being shown in the example. Document it as an optional (but usually required) parameter. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Add optional support for Ethernet core interruptRobert Hancock1-1/+2
Previously this driver only handled interrupts from the DMA RX and TX blocks, not from the Ethernet core itself. Add optional support for the Ethernet core interrupt, which is used to detect rx_missed and framing errors signalled by the hardware. In order to use this interrupt, a third interrupt needs to be specified in the device tree. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07net: axienet: Use clock framework to get device clock rateRobert Hancock1-0/+6
This driver was previously always calculating the MDIO clock divisor (from AXI bus clock to MDIO bus clock) based on the CPU clock frequency, assuming that it is the same as the AXI bus frequency, but that simplistic method only works on the MicroBlaze platform. Add support for specifying the clock used for the device in the device tree using the clock framework. If the clock is specified then it will be used when calculating the clock divisor. The previous CPU clock detection method is left for backward compatibility if no clock is specified. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07dt-bindings: socfpga-dwmac: add "altr, socfpga-stmmac-a10-s10" bindingDinh Nguyen1-2/+8
Add the "altr,socfpga-stmmac-a10-s10" binding for Arria10/Agilex/Stratix10 implementation of the stmmac ethernet controller. On the Arria10, Agilex, and Stratix10 SoCs, there are a few differences from the Cyclone5 and Arria5: - The emac PHY setup bits are in separate registers. - The PTP reference clock select mask is different. - The register to enable the emac signal from FPGA is different. Because of these differences, the dwmac-socfpga glue logic driver will use this new binding to set the appropriate bits for PHY, PTP reference clock, and signal from FPGA. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05dt-bindings: net: dsa: marvell: add "marvell,mv88e6250" compatible stringRasmus Villemoes1-2/+5
The mv88e6250 has port_base_addr 0x8 or 0x18 (depending on configuration pins), so it constitutes a new family and hence needs its own compatible string. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04dt-bindings: net: mediatek: Add support for MediaTek MT7629 SoCSean Wang1-2/+12
Add binding document for the ethernet on MT7629 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04dt-bindings: clock: mediatek: Add an extra required property to sgmiisysSean Wang1-0/+2
add an extra required property "mediatek,physpeed" to sgmiisys to determine link speed to match up the capability of the target PHY. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller24-63/+103
The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26dt-bindings: net: add qca,ar71xx.txt documentationOleksij Rempel1-0/+45
Add binding documentation for Atheros/QCA networking IP core used in many routers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24dt-bindings: net: document new usxgmii phy modeHeiner Kallweit1-0/+1
Add new interface mode USXGMII to binding documentation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24dt-binding: ptp_qoriq: support ENETC PTP compatibleY.b. Lu1-0/+1
Add a new compatible for ENETC PTP. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23dt-bindings: phy: dp83867: Add documentation for disabling clock outputTrent Piepho1-2/+4
The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23dt-bindings: phy: dp83867: Describe how driver behaves w.r.t rgmii delayTrent Piepho1-0/+8
Add a note to make it more clear how the driver behaves when "rgmii" vs "rgmii-id", "rgmii-idrx", or "rgmii-idtx" interface modes are selected. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22dt: bindings: mtd: replace references to nand.txt with nand-controller.yamlKamal Dasu15-39/+39
nand-controller.yaml replaced nand.txt however the references to it were not updated. This change updates these references wherever it appears in bindings documentation. Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt-bindings: interrupt-controller: arm,gic: Fix schema errors in exampleRob Herring1-11/+13
Validating the examples against the schema have a few errors: arm,gic.example.dt.yaml: 'ranges' does not match any of the regexes: '^v2m@[0-9a-f]+$', 'pinctrl-[0-9]+' arm,gic.example.dt.yaml: #address-cells:0:0: 2 is not one of [0, 1] arm,gic.example.dt.yaml: #size-cells:0:0: 1 was expected 'ranges' is valid, but missing from the schema, so add it. The reg addresses and sizes don't match the schema requirements and the example template. We could just override the example template to use 64-bit addresses, but there's not really any value showing that in the example. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt-bindings: arm: Clean up CPU binding examplesRobin Murphy2-8/+8
Following commit 31af04cd60d3 ("arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string"), clean up these binding examples in case anyone is tempted to copy them. CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt: fix refs that were renamed to json with the same file nameMauro Carvalho Chehab4-4/+4
These files were converted to json-schema, but the references weren't renamed. Fixes: 66ed144f147a ("dt-bindings: interrupt-controller: Convert ARM GIC to json-schema") (and other similar commits) Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt-bindings: Pass binding directory to validation toolsRob Herring1-1/+1
In order to have $ref's to schema files within the kernel, we need to pass the base path of bindings to the schema validation tools. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-22dt-bindings: sifive: describe sifive-blocks versioningPaul Walmsley1-0/+38
For IP blocks that are generated from the public, open-source sifive-blocks repository, describe the version numbering policy that its maintainers intend to use, upon request from Rob Herring <robh@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Megan Wachs <megan@sifive.com> Cc: Wesley Terpstra <wesley@sifive.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer
2019-05-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-1/+150
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
2019-05-19Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+1
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ...
2019-05-19Merge tag 'riscv-for-linus-5.2-mw2' of ↵Linus Torvalds1-0/+51
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains an assortment of RISC-V related patches that I'd like to target for the 5.2 merge window. Most of the patches are cleanups, but there are a handful of user-visible changes: - The nosmp and nr_cpus command-line arguments are now supported, which work like normal. - The SBI console no longer installs itself as a preferred console, we rely on standard mechanisms (/chosen, command-line, hueristics) instead. - sfence_remove_sfence_vma{,_asid} now pass their arguments along to the SBI call. - Modules now support BUG(). - A missing sfence.vma during boot has been added. This bug only manifests during boot. - The arch/riscv support for SiFive's L2 cache controller has been merged, which should un-block the EDAC framework work. I've only tested this on QEMU again, as I didn't have time to get things running on the Unleashed. The latest master from this morning merges in cleanly and passes the tests as well" * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) riscv: fix locking violation in page fault handler RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs RISC-V: Add DT documentation for SiFive L2 Cache Controller RISC-V: Avoid using invalid intermediate translations riscv: Support BUG() in kernel module riscv: Add the support for c.ebreak check in is_valid_bugaddr() riscv: support trap-based WARN() riscv: fix sbi_remote_sfence_vma{,_asid}. riscv: move switch_mm to its own file riscv: move flush_icache_{all,mm} to cacheflush.c tty: Don't force RISCV SBI console as preferred console RISC-V: Access CSRs using CSR numbers RISC-V: Add interrupt related SCAUSE defines in asm/csr.h RISC-V: Use tabs to align macro values in asm/csr.h RISC-V: Fix minor checkpatch issues. RISC-V: Support nr_cpus command line option. RISC-V: Implement nosmp commandline option. RISC-V: Add RISC-V specific arch_match_cpu_phys_id riscv: vdso: drop unnecessary cc-ldoption riscv: call pm_power_off from machine_halt / machine_power_off ...
2019-05-17RISC-V: Add DT documentation for SiFive L2 Cache ControllerYash Shah1-0/+51
Add device tree bindings for SiFive FU540 L2 cache controller driver Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-16dt-bindings: Convert vendor prefixes to json-schemaRob Herring2-476/+977
Convert the vendor prefix registry to a schema. This will enable checking that new vendor prefixes are added (in addition to the less than perfect checkpatch.pl check) and will also check against adding other prefixes which are not vendors. Converted vendor-prefixes.txt using the following sed script: sed -e 's/\([a-zA-Z0-9\-]*\)[[:space:]]*\([a-zA-Z0-9].*\)/ "^\1,\.\*\":\n description: \2/' Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-16Merge tag 'at91-5.2-soc' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late AT91 SoC for 5.2 - PM changes for SAM9X60 * tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: do not disable/enable PLLA for ULP modes ARM: at91: pm: disable RC oscillator in ULP0 ARM: at91: pm: add ULP1 support for SAM9X60 ARM: at91: pm: add support for per SoC wakeup source configuration ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs ARM: at91: pm: initial PM support for SAM9X60 dt-bindings: arm: atmel: add binding for SAM9X60 SoC ARM: at91: pm: introduce at91_soc_pm structure Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-16Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds24-94/+1043
Pull ARM Device-tree updates from Olof Johansson: "Besides new bindings and additional descriptions of hardware blocks for various SoCs and boards, the main new contents here is: SoCs: - Intel Agilex (SoCFPGA) - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus) New boards: - Allwinner: + RerVision H3-DVK (H3) + Oceanic 5205 5inMFD (H6) + Beelink GS2 (H6) + Orange Pi 3 (H6) - Rockchip: + Orange Pi RK3399 + Nanopi NEO4 + Veyron-Mighty Chromebook variant - Amlogic: + SEI Robotics SEI510 - ST Micro: + stm32mp157a discovery1 + stm32mp157c discovery2 - NXP: + Eckelmann ci4x10 (i.MX6DL) + i.MX8MM EVK (i.MX8MM) + ZII i.MX7 RPU2 (i.MX7) + ZII SPB4 (VF610) + Zii Ultra (i.MX8M) + TQ TQMa7S (i.MX7Solo) + TQ TQMa7D (i.MX7Dual) + Kobo Aura (i.MX50) + Menlosystems M53 (i.MX53)j - Nvidia: + Jetson Nano (Tegra T210)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits) arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge arm64: dts: bitmain: Add pinctrl support for BM1880 SoC arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board arm64: dts: bitmain: Add GPIO support for BM1880 SoC ARM: dts: gemini: Indent DIR-685 partition table dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20 arm64: dts: msm8998: thermal: Fix number of supported sensors arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones arm64: dts: exynos: Move fixed-clocks out of soc arm64: dts: exynos: Move pmu and timer nodes out of soc ARM: dts: s5pv210: Fix camera clock provider on Goni board ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210 ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250 ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250 ARM: dts: exynos: Move pmu and timer nodes out of soc arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64 arm64: dts: db820c: Add sound card support arm64: dts: apq8096-db820c: Add HDMI display support ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds6-2/+215
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-16Merge branch 'linus' of ↵Linus Torvalds5-7/+113
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal soc updates from Eduardo Valentin: - thermal core has a new devm_* API for registering cooling devices. I took the entire series, that is why you see changes on drivers/hwmon in this pull (Guenter Roeck) - rockchip thermal driver gains support to PX30 SoC (Elaine Zhang) - the generic-adc thermal driver now considers the lookup table DT property as optional (Jean-Francois Dagenais) - Refactoring of tsens thermal driver (Amit Kucheria) - Cleanups on cpu cooling driver (Daniel Lezcano) - broadcom thermal driver dropped support to ACPI (Srinath Mannam) - tegra thermal driver gains support to OC hw throttle and GPU throtle (Wei Ni) - Fixes in several thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits) hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power thermal: rockchip: Support the PX30 SoC in thermal driver dt-bindings: rockchip-thermal: Support the PX30 SoC compatible thermal: rockchip: fix up the tsadc pinctrl setting error thermal: broadcom: Remove ACPI support thermal: Fix build error of missing devm_ioremap_resource on UM thermal/drivers/cpu_cooling: Remove pointless field thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX) thermal/drivers/cpu_cooling: Fixup the header and copyright thermal/drivers/cpu_cooling: Remove pointless test in power2state() thermal: rcar_gen3_thermal: disable interrupt in .remove thermal: rcar_gen3_thermal: fix interrupt type thermal: Introduce devm_thermal_of_cooling_device_register ...
2019-05-16Merge branch 'fixes' into arm/socOlof Johansson2-3/+3
Merge in a few pending fixes from pre-5.1 that didn't get sent in: MAINTAINERS: update arch/arm/mach-davinci ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'for-v5.2' of ↵Linus Torvalds8-10/+85
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Core: - Add over-current health state - Add standard, adaptive and custom charge types - Add new properties for start/end charge threshold New Drivers / Hardware: - UCS1002 Programmable USB Port Power Controller - Ingenic JZ47xx Battery Fuel Gauge - AXP20x USB Power: Add AXP813 support - AT91 poweroff: Add SAM9X60 support - OLPC battery: Add XO-1.5 and XO-1.75 support Misc Changes: - syscon-reboot: support mask property - AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor thought it's a good idea to build a desktop system with a fuel gauge, that slowly "discharges"... - cpcap-battery: Fix calculation errors - misc fixes" * tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits) power: supply: olpc_battery: force the le/be casts power: supply: ucs1002: Fix build error without CONFIG_REGULATOR power: supply: ucs1002: Fix wrong return value checking power: supply: Add driver for Microchip UCS1002 dt-bindings: power: supply: Add bindings for Microchip UCS1002 power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant power: supply: core: fix clang -Wunsequenced power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties power: supply: core: Add Standard, Adaptive, and Custom charge types power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist power: supply: bq27xxx_battery: Notify also about status changes power: supply: olpc_battery: Have the framework register sysfs files for us power: supply: olpc_battery: Add OLPC XO 1.75 support power: supply: olpc_battery: Avoid using platform_info power: supply: olpc_battery: Use devm_power_supply_register() power: supply: olpc_battery: Move priv data to a struct power: supply: olpc_battery: Use DT to get battery version x86/platform/olpc: Use a correct version when making up a battery node x86/platform/olpc: Trivial code move in DT fixup ...
2019-05-15dt-bindings: pps: pps-gpio PPS ECHO implementationTom Burkart1-0/+7
This patch implements the device tree binding changes required for the PPS ECHO functionality for pps-gpio, that sysfs claims is available already. It adds two DT properties for configuring the PPS ECHO functionality. This patch is provided separated from the rest of the patch per Documentation/devicetree/bindings/submitting-patches.txt. This patch was originally written by Lukas Senger as part of a masters thesis project and modified for inclusion into the linux kernel by Tom Burkart. Link: http://lkml.kernel.org/r/20190324043305.6627-3-tom@aussec.com Signed-off-by: Tom Burkart <tom@aussec.com> Signed-off-by: Lukas Senger <lukas@fridolin.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14Merge tag 'backlight-next-5.2' of ↵Linus Torvalds1-0/+129
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds12-3/+343
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds3-5/+110
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-14dt-bindings: rockchip-thermal: Support the PX30 SoC compatibleElaine Zhang1-0/+1
Add a new compatible for thermal founding on PX30 SoCs. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14dt-bindings: thermal: generic-adc: make lookup-table optionalJean-Francois Dagenais1-2/+8
Update binding description making lookup-table optional. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14dt-bindings: thermal: al-thermal: Add binding documentationTalel Shenhar1-0/+33
Add thermal binding documentation for Amazon's Annapurna Labs Thermal Sensor. Signed-off-by: Talel Shenhar <talel@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14dt: thermal: tsens: Add bindings for qcs404Amit Kucheria1-0/+14
qcs404 uses v1 of the TSENS IP block. Create a fallback DT property "qcom,tsens-v1" to gather common code Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14dt-bindings: backlight: Add lm3630a bindingsBrian Masney1-0/+129
Add new backlight bindings for the TI LM3630A dual-string white LED. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: lochnagar: Add links to binding docs for sound and hwmonCharles Keepax1-0/+17
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: LMU: Fix lm3632 dt binding exampleDan Murphy1-2/+2
Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: Add bindings for SAM9X60 HLCD controllerClaudiu Beznea1-0/+1
Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: stm32: syscon: Add clock supportFabrice Gasnier1-0/+2
STM32 system configuration controller registers needs to be clocked. Document clock support on stm32-syscon. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones21-14/+400
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-14of: Add bindings of OC hw throttle for Tegra socthermWei Ni1-0/+25
Add OC HW throttle configuration for soctherm in DT. It is used to describe the OCx throttle events. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14of: Add bindings of gpu hw throttle for Tegra socthermWei Ni1-2/+15
Add "nvidia,gpu-throt-level" property to set gpu hw throttle level. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>