summaryrefslogtreecommitdiff
path: root/Documentation/driver-api
AgeCommit message (Collapse)AuthorFilesLines
2023-02-22Merge tag 'platform-drivers-x86-v6.3-1' of ↵Linus Torvalds2-23/+25
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ...
2023-02-21Merge tag 'thermal-6.3-rc1' of ↵Linus Torvalds3-321/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
2023-02-09Documentation: admin-guide: Move intel_powerclamp documentationSrinivas Pandruvada2-321/+0
Create a folder "thermal" under Documentation/admin-guide and move intel_powerclamp documentation to this folder. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03platform/surface: aggregator: Rename top-level request functions to avoid ↵Maximilian Luz1-4/+4
ambiguities We currently have a struct ssam_request_sync and a function ssam_request_sync(). While this is valid C, there are some downsides to it. One of these is that current Sphinx versions (>= 3.0) cannot disambiguate between the two (see disucssion and pull request linked below). It instead emits a "WARNING: Duplicate C declaration" and links for the struct and function in the resulting documentation link to the same entry (i.e. both to either function or struct documentation) instead of their respective own entries. While we could just ignore that and wait for a fix, there's also a point to be made that the current naming can be somewhat confusing when searching (e.g. via grep) or trying to understand the levels of abstraction at play: We currently have struct ssam_request_sync and associated functions ssam_request_sync_[alloc|free|init|wait|...]() operating on this struct. However, function ssam_request_sync() is one abstraction level above this. Similarly, ssam_request_sync_with_buffer() is not a function operating on struct ssam_request_sync, but rather a sibling to ssam_request_sync(), both using the struct under the hood. Therefore, rename the top level request functions: ssam_request_sync() -> ssam_request_do_sync() ssam_request_sync_with_buffer() -> ssam_request_do_sync_with_buffer() ssam_request_sync_onstack() -> ssam_request_do_sync_onstack() Link: https://lore.kernel.org/all/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org/ Link: https://github.com/sphinx-doc/sphinx/pull/8313 Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-02-03platform/surface: aggregator: Improve documentation and handling of message ↵Maximilian Luz2-19/+21
target and source IDs The `tid_in` and `tid_out` fields of the serial hub protocol command struct (struct ssh_command) are actually source and target IDs, indicating the peer from which the message originated and the peer for which it is intended. Change the naming of those fields accordingly and improve the protocol documentation. Additionally, introduce an enum containing all currently known peers, i.e. targets and sources. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-26thermal: intel: int340x: Add production mode attributeSrinivas Pandruvada1-0/+3
It is possible that the system manufacturer locks down thermal tuning beyond what is usually done on the given platform. In that case user space calibration tools should not try to adjust the thermal configuration of the system. To allow user space to check if that is the case, add a new sysfs attribute "production_mode" that will be present when the ACPI DCFG method is present under the INT3400 device object in the ACPI Namespace. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-12media: davinci: remove vpbe supportArnd Bergmann2-40/+0
The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-19Merge tag 'dmaengine-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - Qualcomm SDM670, SM6115 and SM6375 GPI controller support - Ingenic JZ4755 dmaengine support - Removal of iop-adma driver Updates: - Tegra support for dma-channel-mask - at_hdmac cleanup and virt-chan support for this driver" * tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits) dmaengine: Revert "dmaengine: remove s3c24xx driver" dmaengine: tegra: Add support for dma-channel-mask dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA dmaengine: idxd: Remove linux/msi.h include dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375 dmaengine: idxd: Fix crc_val field for completion record dmaengine: at_hdmac: Convert driver to use virt-dma dmaengine: at_hdmac: Remove unused member of at_dma_chan dmaengine: at_hdmac: Rename "chan_common" to "dma_chan" dmaengine: at_hdmac: Rename "dma_common" to "dma_device" dmaengine: at_hdmac: Use bitfield access macros dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c dmaengine: at_hdmac: Set include entries in alphabetic order dmaengine: at_hdmac: Use pm_ptr() dmaengine: at_hdmac: Use devm_clk_get() dmaengine: at_hdmac: Use devm_platform_ioremap_resource dmaengine: at_hdmac: Use devm_kzalloc() and struct_size() dmaengine: at_hdmac: Introduce atc_get_llis_residue() dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts ...
2022-12-19Merge tag 'phy-for-6.2' of ↵Linus Torvalds1-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ...
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-16Merge tag 'tty-6.2-rc1' of ↵Linus Torvalds2-26/+33
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver changes for 6.2-rc1. As in previous kernel releases, nothing big here at all, just some small incremental serial/tty layer cleanups and some individual driver additions and fixes. Highlights are: - serial helper macros from Jiri Slaby to reduce the amount of duplicated code in serial drivers - api cleanups and consolidations from Ilpo Järvinen in lots of serial drivers - the usual set of n_gsm fixes from Daniel Starke as that code gets exercised more - TIOCSTI is finally able to be disabled if requested (security hardening feature from Kees Cook) - fsl_lpuart driver fixes and features added - other small serial driver additions and fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: atmel: don't stop the transmitter when doing PIO serial: atmel: cleanup atmel_start+stop_tx() tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API serial: sunsab: Fix error handling in sunsab_init() serial: altera_uart: fix locking in polling mode serial: pch: Fix PCI device refcount leak in pch_request_dma() tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused tty: serial: fsl_lpuart: Add runtime pm support tty: serial: fsl_lpuart: enable wakeup source for lpuart serdev: Replace poll loop by readx_poll_timeout() macro tty: synclink_gt: unwind actions in error path of net device open serial: stm32: move dma_request_chan() before clk_prepare_enable() dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity' serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle. serial: amba-pl011: avoid SBSA UART accessing DMACR register tty: serial: altera_jtaguart: remove struct altera_jtaguart tty: serial: altera_jtaguart: use uart_port::read_status_mask tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars() n_tty: Rename tail to old_tail in n_tty_read() ...
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-12-15Merge tag 'gpio-updates-for-v6.2' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have a new GPIO multiplexer driver, bunch of driver updates and refactoring in the core GPIO library. GPIO core: - teach gpiolib to work with software nodes for HW description - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number of GPIOS since the allocation became entirely dynamic - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller, Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701 - refactor OF quirk code - some general refactoring of the OF and ACPI code, adding new helpers, minor tweaks and fixes, making fwnode usage consistent etc. GPIO uAPI: - fix an issue where the user-space can trigger a NULL-pointer dereference in the kernel by opening a device file, forcing a driver unbind and then calling one of the syscalls on the associated file descriptor New drivers: - add gpio-latch: a new GPIO multiplexer based on latches connected to other GPIOs Driver updates: - convert i2c GPIO expanders to using .probe_new() - drop the gpio-sta2x11 driver - factor out common code for the ACCES IDIO-16 family of controllers and use this new library wherever applicable in drivers - add DT support to gpio-hisi - allow building gpio-davinci as a module and increase its maxItems property - add support for a new model to gpio-pca9570 - other minor changes to various drivers" * tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits) gpio: sim: set a limit on the number of GPIOs gpiolib: protect the GPIO device against being dropped while in use by user-space gpiolib: cdev: fix NULL-pointer dereferences gpiolib: Provide to_gpio_device() helper gpiolib: Unify access to the device properties gpio: Do not include <linux/kernel.h> when not really needed. gpio: pcf857x: Convert to i2c's .probe_new() gpio: pca953x: Convert to i2c's .probe_new() gpio: max732x: Convert to i2c's .probe_new() dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names gpiolib: ensure that fwnode is properly set gpio: sl28cpld: Replace irqchip mask_invert with unmask_base gpiolib: of: Use correct fwnode for DT-probed chips gpiolib: of: Drop redundant check in of_mm_gpiochip_remove() gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode gpiolib: add support for software nodes gpiolib: consolidate GPIO lookups gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes gpiolib: acpi: change acpi_find_gpio() to accept firmware node ...
2022-12-14Merge tag 'pinctrl-v6.2-1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ...
2022-12-13Merge tag 'spi-v6.2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A busy enough release, but not for the core which has only seen very small updates. The biggest addition is the readdition of support for detailed configuration of the timings around chip selects. That had been removed for lack of use but there's been applications found for it on Atmel systems. Otherwise the updates are mostly feature additions and cleanups to existing drivers. Summary: - Provide a helper for getting device match data in a way that abstracts away which firmware interface is being used. - Re-add the spi_set_cs_timing() API for detailed configuration of the timing around chip select and support it on Atmel. - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450 FIU and Socionext F_OSPI" * tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits) spi: dt-bindings: Convert Synquacer SPI to DT schema spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode spi: spi-mtk-nor: Add recovery mechanism for dma read timeout spi: spi-fsl-lpspi: add num-cs binding for lpspi spi: spi-fsl-lpspi: support multiple cs for lpspi spi: mtk-snfi: Add snfi support for MT7986 IC spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property) spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include) spi: mediatek: Enable irq when pdata is ready spi: spi-mtk-nor: Unify write buffer on/off spi: intel: Add support for SFDP opcode spi: intel: Take possible chip address into account in intel_spi_read/write_reg() spi: intel: Implement adjust_op_size() spi: intel: Use ->replacement_op in intel_spi_hw_cycle() spi: cadence: Drop obsolete dependency on COMPILE_TEST spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings spi: wpcm-fiu: Add direct map support ...
2022-12-13Merge tag 'regulator-v6.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. Summary: - An API for requesting all regulators defined in DT - Conversion of lots of drivers to the I2C probe_new() API - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190" * tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits) regulator: core: Use different devices for resource allocation and DT lookup dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() regulator: add mt6357 regulator regulator: dt-bindings: Add binding schema for mt6357 regulators regulator: core: fix resource leak in regulator_register() regulator: core: fix module refcount leak in set_supply() regulator: core: fix use_count leakage when handling boot-on regulator: rk808: Use dev_err_probe regulator: rk808: reduce 'struct rk808' usage regulator: Drop obsolete dependencies on COMPILE_TEST regulator: pv88080-regulator: Convert to i2c's .probe_new() regulator: pfuze100-regulator: Convert to i2c's .probe_new() regulator: isl6271a-regulator: Convert to i2c's .probe_new() regulator: fan53555: Convert to i2c's .probe_new() regulator: act8865-regulator: Convert to i2c's .probe_new() regulator: qcom-rpmh: Add support for PM8550 regulators regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550 regulator: tps65023-regulator: Convert to i2c's .probe_new() regulator: tps62360-regulator: Convert to i2c's .probe_new() ...
2022-12-13Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+6
Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...
2022-12-13Merge tag 'docs-6.2' of git://git.lwn.net/linuxLinus Torvalds2-1/+9
Pull documentation updates from Jonathan Corbet: "This was a not-too-busy cycle for documentation; highlights include: - The beginnings of a set of translations into Spanish, headed up by Carlos Bilbao - More Chinese translations - A change to the Sphinx "alabaster" theme by default for HTML generation. Unlike the previous default (Read the Docs), alabaster is shipped with Sphinx by default, reducing the number of other dependencies that need to be installed. It also (IMO) produces a cleaner and more readable result. - The ability to render the documentation into the texinfo format (something Sphinx could always do, we just never wired it up until now) Plus the usual collection of typo fixes, build-warning fixes, and minor updates" * tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits) Documentation/features: Use loongarch instead of loong Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR docs/zh_CN: Fix '.. only::' directive's expression docs/sp_SP: Add memory-barriers.txt Spanish translation docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI Documentation/features: Update feature lists for 6.1 Documentation: Fixed a typo in bootconfig.rst docs/sp_SP: Add process coding-style translation docs/sp_SP: Add kernel-docs.rst Spanish translation docs: Create translations/sp_SP/process/, move submitting-patches.rst docs: Add book to process/kernel-docs.rst docs: Retire old resources from kernel-docs.rst docs: Update maintainer of kernel-docs.rst Documentation: riscv: Document the sv57 VM layout Documentation: USB: correct possessive "its" usage math64: fix kernel-doc return value warnings math64: add kernel-doc for DIV64_U64_ROUND_UP math64: favor kernel-doc from header files doc: add texinfodocs and infodocs targets ...
2022-11-25Merge tag 'v6.1-rc4' into spi-6.2Mark Brown3-7/+16
Linux 6.1-rc4 which should get my CI working on RPi3s again.
2022-11-25Merge tag 'v6.1-rc4' into regulator-6.2Mark Brown3-7/+16
Linux 6.1-rc4 which should get my CI working on RPi3s again.
2022-11-24Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie3-6/+3
Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-22Merge 6.1-rc6 into tty-nextGreg Kroah-Hartman2-3/+3
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22Documentation: devres: add missing PWM helperYang Yingliang1-0/+1
Add missing devm_pwmchip_add() to devres.rst. It's introduced by commit bcda91bf86c1 ("pwm: Add a device-managed function to add PWM chips"). Fixes: bcda91bf86c1 ("pwm: Add a device-managed function to add PWM chips") Cc: Thierry Reding <thierry.reding@gmail.com> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221102024430.1444714-1-yangyingliang@huawei.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-11-21Merge 6.1-rc6 into usb-nextGreg Kroah-Hartman2-3/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-21Merge 6.1-rc6 into driver-core-nextGreg Kroah-Hartman4-10/+18
We need the kernfs changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-18Merge tag 'tty-6.1-rc6' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 6.1-rc6. They all resolve reported problems: - kernel doc build problems with the -rc1 serial driver documentation update - n_gsm reported problems - imx serial driver missing callback - lots of tiny 8250 driver fixes for reported issues. All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake serial: 8250_lpss: Configure DMA also w/o DMA filter serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send Revert "tty: n_gsm: replace kicktimer with delayed_work" Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" serial: imx: Add missing .thaw_noirq hook tty: serial: fsl_lpuart: don't break the on-going transfer when global reset serial: 8250: omap: Flush PM QOS work on remove serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
2022-11-16Documentation: devres: add missing LED helpersYang Yingliang1-0/+3
Add some missing device-managed helpers of led to devres.rst. devm_led_classdev_register_ext() is introduced by commit b2b998c0f944 ("leds: class: Improve LED and LED flash class registration API"). devm_led_trigger_register() is introduced by commit 9534cc31dda2 ("leds: core: add managed version of led_trigger_register"). devm_of_led_get() is introduced by commit e389240ad992 ("leds: Add managed API to get a LED from a device driver"). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221103021331.1007699-1-yangyingliang@huawei.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-11-16Documentation: eisa: Fix typoAlbert Zhou1-1/+1
Fix a typo in the description of the kernel parameter eisa_bus.disable_dev within eisa.rst. Signed-off-by: Albert Zhou <albert.zhou.50@gmail.com> Link: https://lore.kernel.org/r/20221105080653.4741-1-albert.zhou.50@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-11-10Documentation: devres: add missing IIO helpersYang Yingliang1-0/+4
Add some missing device-managed helpers of iio to devres.rst. devm_iio_kfifo_buffer_setup_ext() is introduced by commit 0a21526bc1d4 ("iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant"). devm_iio_triggered_buffer_setup_ext() is introduced by commit 5164c7889857 ("iio: triggered-buffer: add {devm_}iio_triggered_buffer_setup_ext variants"). devm_iio_hw_consumer_alloc() is introduced by b688c18d3006 ("IIO: hw_consumer: add devm_iio_hw_consumer_alloc"). devm_fwnode_iio_channel_get_by_name() is introduced by commit 1e64b9c5f9a0 ("iio: inkern: move to fwnode properties"). Fixes: 0a21526bc1d4 ("iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant") Fixes: 5164c7889857 ("iio: triggered-buffer: add {devm_}iio_triggered_buffer_setup_ext variants") Fixes: b688c18d3006 ("IIO: hw_consumer: add devm_iio_hw_consumer_alloc") Fixes: 1e64b9c5f9a0 ("iio: inkern: move to fwnode properties") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20221103023402.1024437-1-yangyingliang@huawei.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-11-09Documentation: devres: add missing MEM helperYang Yingliang1-0/+1
Add missing devm_kstrdup_const() to devres.rst. It's introduce by commit 09d1ea1c7309 ("devres: provide devm_kstrdup_const()"). Fixes: 09d1ea1c7309 ("devres: provide devm_kstrdup_const()") Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221102025534.1450337-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.cAkira Yokosawa1-3/+2
Since merge of tty-6.0-rc1, "make htmldocs" with Sphinx >=3.1 emits a bunch of warnings indicating duplicate kernel-doc comments from drivers/tty/serial/serial_core.c. This is due to the kernel-doc directive for serial_core.c in serial/drivers.rst added in the merge. It conflicts with an existing kernel-doc directive in miscellaneous.rst. Remove the latter directive and resolve the duplicates. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Fixes: 607ca0f742b7 ("Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") Cc: stable@vger.kernel.org # 6.0 Cc: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/4e54c76a-138a-07e0-985a-dd83cb622208@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09Documentation: devres: add missing PHY helpersYang Yingliang1-0/+2
Add devm_usb_get_phy_by_phandle() to devres.rst. It's introduced by commit 5d3c28b5a42d ("usb: otg: add device tree support to otg library"). Add devm_usb_get_phy_by_node() to devres.rst. It's introduced by commit e842b84c8e72 ("usb: phy: Add interface to get phy give of device_node.") Fixes: 5d3c28b5a42d ("usb: otg: add device tree support to otg library") Fixes: e842b84c8e72 ("usb: phy: Add interface to get phy give of device_node.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221103020625.1003759-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09docs/pinctrl: fix runtime pinmuxing exampleSiarhei Volkau1-2/+2
The example declares "struct pinctrl *p" but refers to "foo->p" which isn't declared in the context of the example. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221101205159.1468069-3-lis8215@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-09docs/pinctrl: fix pinctrl_select_state examplesSiarhei Volkau1-3/+3
The function requires two arguments. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221101205159.1468069-2-lis8215@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-07doc: phy: Document typical order of API callsSean Anderson1-1/+24
Document the typical order of API calls to used by new drivers and controllers. Many existing controllers follow this order, but some do not. This is especially true for controllers designed to work with one particular PHY driver, which may not need a call to (for example) phy_init. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221018175841.1906611-1-sean.anderson@seco.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-04Documentation: devres: add missing devm_acpi_dma_controller_free() helperYang Yingliang1-0/+1
Add missing devm_acpi_dma_controller_free() to devres.rst, it's introduced by commit 1b2e98bc1e35 ("dma: acpi-dma: introduce ACPI DMA helpers"). Fixes: 1b2e98bc1e35 ("dma: acpi-dma: introduce ACPI DMA helpers") Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221102022701.1407289-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-03Documentation: Make formatting consistent for rs485 docsIlpo Järvinen1-18/+19
Tweak styling of names that come directly from the code. Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019093343.9546-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03Documentation: rs485: Fix struct referencingIlpo Järvinen1-10/+11
Use "struct serial_rs485" to get the references properly recognized. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019093343.9546-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03Documentation: rs485: Mention uart_get_rs485_mode()Ilpo Järvinen1-3/+4
Add to rs485 documentation that serial core prepares the struct serial_rs485 when uart_get_rs485_mode() is called. Remove the wrong claim that the driver must fill it by itself. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019093343.9546-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03Documentation: rs485: Link reference properlyIlpo Järvinen1-4/+4
Link DT bindings reference properly. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019093343.9546-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03serial: Convert serial_rs485 to kernel docIlpo Järvinen1-6/+7
Convert struct serial_rs485 comments to kernel doc format and include it into documentation. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019093343.9546-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03tty: serial: introduce transmit helpersJiri Slaby (SUSE)1-0/+3
Many serial drivers do the same thing: * send x_char if set * keep sending from the xmit circular buffer until either - the loop reaches the end of the xmit buffer - TX is stopped - HW fifo is full * check for pending characters and: - wake up tty writers to fill for more data into xmit buffer - stop TX if there is nothing in the xmit buffer The only differences are: * how to write the character to the HW fifo * the check of the end condition: - is the HW fifo full? - is limit of the written characters reached? So unify the above into two helpers: * uart_port_tx_limited() -- it performs the above taking the written characters limit into account, and * uart_port_tx() -- the same as above, except it only checks the HW readiness, not the characters limit. The HW specific operations (as stated as "differences" above) are passed as arguments to the macros. They are: * tx_ready -- returns true if HW can accept more data. * put_char -- write a character to the device. * tx_done -- when the write loop is done, perform arbitrary action before potential invocation of ops->stop_tx() happens. Note that the above are macros. This means the code is generated in place and the above 3 arguments are "inlined". I.e. no added penalty by generating call instructions for every single character. Nor any indirect calls. (As in some previous versions of this patchset.) Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221004104927.14361-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-02Documentation: devres: add missing I2C helperYang Yingliang1-0/+1
Add missing devm_i2c_add_adapter() to devres.rst. It's introduced by commit 07740c92ae57 ("i2c: core: add managed function for adding i2c adapters"). Fixes: 07740c92ae57 ("i2c: core: add managed function for adding i2c adapters") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-11-02regulator: docs: add missing helperYang Yingliang1-0/+1
Add missing devm_regulator_bulk_get_const() to devres.rst, it's introduced by commit 1de452a0edda ("regulator: core: Allow drivers to define their init data as const"). Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221102020716.1397449-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-01spi: Update reference to struct spi_controllerJonathan Neuschäfer1-2/+2
struct spi_master has been renamed to struct spi_controller. Update the reference in spi.rst to make it clickable again. Fixes: 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-27Merge tag 'hardening-v6.1-rc3' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - Fix older Clang vs recent overflow KUnit test additions (Nick Desaulniers, Kees Cook) - Fix kern-doc visibility for overflow helpers (Kees Cook) * tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: overflow: Refactor test skips for Clang-specific issues overflow: disable failing tests for older clang versions overflow: Fix kern-doc markup for functions
2022-10-26overflow: Fix kern-doc markup for functionsKees Cook1-3/+0
Fix the kern-doc markings for several of the overflow helpers and move their location into the core kernel API documentation, where it belongs (it's not driver-specific). Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: linux-hardening@vger.kernel.org Reviewed-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2022-10-25Merge tag 'drm-misc-next-2022-10-20' of ↵Dave Airlie1-0/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: - Documentation for page-flip flags Cross-subsystem Changes: - dma-buf: Add unlocked variant of vmapping and attachment-mapping functions Core Changes: - atomic-helpers: CRTC primary plane test fixes - connector: TV API consistency improvements, cmdline parsing improvements - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper - edid: Fixes for HFVSDB parsing, - fourcc: Addition of the Vivante tiled modifier - makefile: Sort and reorganize the objects files - mode_config: Remove fb_base from drm_mode_config_funcs - sched: Add a module parameter to change the scheduling policy, refcounting fix for fences - tests: Sort the Kunit tests in the Makefile, improvements to the DP-MST tests - ttm: Remove unnecessary drm_mm_clean() call Driver Changes: - New driver: ofdrm - Move all drivers to a common dma-buf locking convention - bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C - ast: Atomic Gamma LUT Support, Convert to SHMEM, various improvements - lcdif: Support for YUV planes - mgag200: Fix PLL Setup on some revisions - udl: Modesetting improvements, hot-unplug support - vc4: Fix support for PAL-M Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
2022-10-23Merge tag 'media/v6.1-2' of ↵Linus Torvalds1-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-18Merge drm/drm-next into drm-misc-nextMaxime Ripard5-21/+32
Let's kick-off this release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-15 16:36:58 +0300