| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To enable kernel consumers of TLS to request a TLS handshake, add
support to net/handshake/ to request a handshake upcall.
This patch also acts as a template for adding handshake upcall
support for other kernel transport layer security providers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a kernel consumer needs a transport layer security session, it
first needs a handshake to negotiate and establish a session. This
negotiation can be done in user space via one of the several
existing library implementations, or it can be done in the kernel.
No in-kernel handshake implementations yet exist. In their absence,
we add a netlink service that can:
a. Notify a user space daemon that a handshake is needed.
b. Once notified, the daemon calls the kernel back via this
netlink service to get the handshake parameters, including an
open socket on which to establish the session.
c. Once the handshake is complete, the daemon reports the
session status and other information via a second netlink
operation. This operation marks that it is safe for the
kernel to use the open socket and the security session
established there.
The notification service uses a multicast group. Each handshake
mechanism (eg, tlshd) adopts its own group number so that the
handshake services are completely independent of one another. The
kernel can then tell via netlink_has_listeners() whether a handshake
service is active and prepared to handle a handshake request.
A new netlink operation, ACCEPT, acts like accept(2) in that it
instantiates a file descriptor in the user space daemon's fd table.
If this operation is successful, the reply carries the fd number,
which can be treated as an open and ready file descriptor.
While user space is performing the handshake, the kernel keeps its
muddy paws off the open socket. A second new netlink operation,
DONE, indicates that the user space daemon is finished with the
socket and it is safe for the kernel to use again. The operation
also indicates whether a session was established successfully.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Things that are not implemented:
- cable tests
- bitmaks in the requests don't work (needs multi-attr support in ynl.py)
- stats-get seems to return nonsense (not passing a bitmask properly?)
- notifications are not tested
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The openvswitch family has a fixed header, uses struct attrs and has array
values. This partial spec demonstrates these features in the YNL CLI. These
specs are sufficient to create, delete and dump datapaths and to dump vports:
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ovs_datapath.yaml \
--do dp-new --json '{ "dp-ifindex": 0, "name": "demo", "upcall-pid": 0}'
None
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ovs_datapath.yaml \
--dump dp-get --json '{ "dp-ifindex": 0 }'
[{'dp-ifindex': 3,
'masks-cache-size': 256,
'megaflow-stats': {'cache-hits': 0,
'mask-hit': 0,
'masks': 0,
'pad1': 0,
'padding': 0},
'name': 'test',
'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0},
'user-features': {'dispatch-upcall-per-cpu',
'tc-recirc-sharing',
'unaligned'}},
{'dp-ifindex': 48,
'masks-cache-size': 256,
'megaflow-stats': {'cache-hits': 0,
'mask-hit': 0,
'masks': 0,
'pad1': 0,
'padding': 0},
'name': 'demo',
'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0},
'user-features': set()}]
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ovs_datapath.yaml \
--do dp-del --json '{ "dp-ifindex": 0, "name": "demo"}'
None
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ovs_vport.yaml \
--dump vport-get --json '{ "dp-ifindex": 3 }'
[{'dp-ifindex': 3,
'ifindex': 3,
'name': 'test',
'port-no': 0,
'stats': {'rx-bytes': 0,
'rx-dropped': 0,
'rx-errors': 0,
'rx-packets': 0,
'tx-bytes': 0,
'tx-dropped': 0,
'tx-errors': 0,
'tx-packets': 0},
'type': 'internal',
'upcall-pid': [0],
'upcall-stats': {'fail': 0, 'success': 0}}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for netlink families that add an optional fixed header structure
after the genetlink header and before any attributes. The fixed-header can be
specified on a per op basis, or once for all operations, which serves as a
default value that can be overridden.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for decoding attributes that contain C structs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Chuck wanted to put the UAPI header in linux/net/ which seems
reasonable, allow genetlink families to choose the location.
It doesn't really matter for non-C-like languages.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink is quite complex but put in the very basics so we can
incrementally fill in the commands as needed.
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--dump get
[{'bus-name': 'netdevsim',
'dev-name': 'netdevsim1',
'dev-stats': {'reload-stats': {'reload-action-info': {'reload-action': 1,
'reload-action-stats': {'reload-stats-entry': [{'reload-stats-limit': 0,
'reload-stats-value': 0}]}}},
'remote-reload-stats': {'reload-action-info': {'reload-action': 2,
'reload-action-stats': {'reload-stats-entry': [{'reload-stats-limit': 0,
'reload-stats-value': 0},
{'reload-stats-limit': 1,
'reload-stats-value': 0}]}}}},
'reload-failed': 0}]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce xdp_set_features_flag utility routine in order to update
dynamically xdp_features according to the dynamic hw configuration via
ethtool (e.g. changing number of hw rx/tx queues).
Add xdp_clear_features_flag() in order to clear all xdp_feature flag.
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I was intending to make all the Netlink Spec code BSD-3-Clause
to ease the adoption but it appears that:
- I fumbled the uAPI and used "GPL WITH uAPI note" there
- it gives people pause as they expect GPL in the kernel
As suggested by Chuck re-license under dual. This gives us benefit
of full BSD freedom while fulfilling the broad "kernel is under GPL"
expectations.
Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/
Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the codegen rules had been changed we can update
the specs to reflect the new default.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a repeated copy/paste typo.
Fixes: d3d854fd6a1d ("netdev-genl: create a simple family for netdev stuff")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 5b4e9a7a71ab ("net: ethtool: extend ringparam set/get APIs for rx_push")
added a new attr for configuring rx-push, right after tx-push.
Add it to the spec, the ring param operation is covered by
the otherwise sparse ethtool spec.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230214043246.230518-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d01 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Ethtool is one of the most actively developed families.
With the changes to the CLI it should be possible to use
the YNL based code for easy prototyping and development.
Add a partial family definition. I've tested the string
set and rings. I don't have any MAC Merge implementation
to test with, but I added the definition for it, anyway,
because it's last. New commands can simply be added at
the end without having to worry about manually providing
IDs / values.
Set (with notification support - None is the response,
the data is from the notification):
$ sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--do rings-set \
--json '{"header":{"dev-name":"enp0s31f6"}, "rx":129}' \
--subscribe monitor
None
[{'msg': {'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0},
'name': 'rings-ntf'}]
Do / dump (yes, the kernel requires that even for dump and even
if empty - the "header" nest must be there):
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--do rings-get \
--json '{"header":{"dev-index": 2}}'
{'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0}
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--dump rings-get \
--json '{"header":{}}'
[{'header': {'dev-index': 2, 'dev-name': 'enp0s31f6'},
'rx': 136,
'rx-max': 4096,
'tx': 256,
'tx-max': 4096,
'tx-push': 0},
{'header': {'dev-index': 3, 'dev-name': 'wlp0s20f3'}, 'tx-push': 0},
{'header': {'dev-index': 19, 'dev-name': 'enp58s0u1u1'},
'rx': 100,
'rx-max': 4096,
'tx-push': 0}]
And error reporting:
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/ethtool.yaml \
--dump rings-get \
--json '{"header":{"flags":5}}'
Netlink error: Invalid argument
nl_len = 68 (52) nl_flags = 0x300 nl_type = 2
error: -22 extack: {'msg': 'reserved bit set',
'bad-attr-offs': 24,
'bad-attr': '.header.flags'}
None
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I had a (bright?) idea of introducing the concept of enum-models
to account for all the weird ways families enumerate their messages.
I've never finished it because generating C code for each of them
is pretty daunting. But for languages which can use ID values directly
the support is simple enough, so clean this up a bit.
"unified" model is what I recommend going forward.
"directional" model is what ethtool uses.
"notify-split" is used by the proposed DPLL code, but we can just
make them use "unified", it hasn't been merged :)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FOU has a reasonably modern Genetlink family. Add a spec.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add schemas for Netlink spec files. As described in the docs
we have 4 "protocols" or compatibility levels, and each one
comes with its own schema, but the more general / legacy
schemas are superset of more modern ones: genetlink is
the smallest followed by genetlink-c and genetlink-legacy.
There is no schema for raw netlink, yet, I haven't found the time..
I don't know enough jsonschema to do inheritance or something
but the repetition is not too bad. I hope.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
