summaryrefslogtreecommitdiff
path: root/Documentation/networking
AgeCommit message (Collapse)AuthorFilesLines
2023-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-5/+12
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-25net: ethtool: coalesce: try to make user settings stick twiceJakub Kicinski1-0/+4
SET_COALESCE may change operation mode and parameters in one call. Changing operation mode may cause the driver to reset the parameter values to what is a reasonable default for new operation mode. Since driver does not know which parameters come from user and which are echoed back from ->get, driver may ignore the parameters when switching operation modes. This used to be inevitable for ioctl() but in netlink we know which parameters are actually specified by the user. We could inform which parameters were set by the user but this would lead to a lot of code duplication in the drivers. Instead try to call the drivers twice if both mode and params are changed. The set method already checks if any params need updating so in case the driver did the right thing the first time around - there will be no second call to it's ->set method (only an extra call to ->get()). For mlx5 for example before this patch we'd see: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 3 rx-frames: 32 tx-usecs: 16 tx-frames: 32 [...] After the change: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 123 rx-frames: 32 tx-usecs: 123 tx-frames: 32 [...] This only works for netlink, so it's a small discrepancy between netlink and ioctl(). Since we anticipate most users to move to netlink I believe it's worth making their lives easier. Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-22rxrpc: Fix potential race in error handling in afs_make_call()David Howells1-5/+12
If the rxrpc call set up by afs_make_call() receives an error whilst it is transmitting the request, there's the possibility that it may get to the point the rxrpc call is ended (after the error_kill_call label) just as the call is queued for async processing. This could manifest itself as call->rxcall being seen as NULL in afs_deliver_to_call() when it tries to lock the call. Fix this by splitting rxrpc_kernel_end_call() into a function to shut down an rxrpc call and a function to release the caller's reference and calling the latter only when we get to afs_put_call(). Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kafs-testing+fedora36_64checkkafs-build-306@auristor.com cc: Marc Dionne <marc.dionne@auristor.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-22Merge tag 'mlx5-updates-2023-04-20' of ↵Jakub Kicinski1-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-04-20 1) Dragos Improves RX page pool, and provides some fixes to his previous series: 1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case 1.2) Hook NAPIs to page pools to gain more performance. 2) From Roi, Some cleanups to TC and eswitch modules. 3) Maher migrates vnic diagnostic counters reporting from debugfs to a dedicated devlink health reporter Maher Says: =========== net/mlx5: Expose vnic diagnostic counters using devlink Currently, vnic diagnostic counters are exposed through the following debugfs: $ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/ cq_overrun quota_exceeded_command total_q_under_processor_handle invalid_command send_queue_priority_update_flow nic_receive_steering_discard The current design does not allow the hypervisor to view the diagnostic counters of its VFs, in case the VFs get bound to a VM. In other words, the counters are not exposed for representor interfaces. Furthermore, the debugfs design is inconvenient future-wise, in case more counters need to be reported by the driver in the future. As these counters pertain to vNIC health, it is more appropriate to utilize the devlink health reporter to expose them. Thus, this patchest includes the following changes: * Drop the current vnic diagnostic counters debugfs interface. * Add a vnic devlink health reporter for PFs/VFs core devices, which when diagnosed will dump vnic diagnostic counter values that are queried from FW. * Add a vnic devlink health reporter for the representor interface, which serves the same purpose listed in the previous point, in addition to allowing the hypervisor to view its VFs diagnostic counters, even when the VFs are bounded to external VMs. Example of devlink health reporter usage is: $devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 =========== 4) SW steering fixes and improvements Yevgeny Kliteynik Says: ======================= These short patch series are just small fixes / improvements for SW steering: - Patch 1: Fix dumping of legacy modify_hdr in debug dump to align to what is expected by parser - Patch 2: Have separate threshold for ICM sync per ICM type - Patch 3: Add more info to the steering debug dump - Linux version and device name - Patch 4: Keep track of number of buddies that are currently in use per domain per buddy type ======================= * tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Update op_mode to op_mod for port selection net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set() net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc() net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn() net/mlx5e: RX, Hook NAPIs to page pools net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ net/mlx5e: Add vnic devlink health reporter to representors net/mlx5: Add vnic devlink health reporter to PFs/VFs Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports" Revert "net/mlx5: Expose steering dropped packets counter" net/mlx5: DR, Add memory statistics for domain object net/mlx5: DR, Add more info in domain dbg dump net/mlx5: DR, Calculate sync threshold of each pool according to its type net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump ==================== Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21pds_core: Kconfig and pds_core.rstShannon Nelson1-0/+16
Remaining documentation and Kconfig hook for building the driver. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: devlink params for enabling VIF supportShannon Nelson1-0/+19
Add the devlink parameter switches so the user can enable the features supported by the VFs. The only feature supported at the moment is vDPA. Example: devlink dev param set pci/0000:2b:00.0 \ name enable_vnet cmode runtime value true Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add FW update feature to devlinkShannon Nelson1-0/+10
Add in the support for doing firmware updates. Of the two main banks available, a and b, this updates the one not in use and then selects it for the next boot. Example: devlink dev flash pci/0000:b2:00.0 \ file pensando/dsc_fw_1.63.0-22.tar Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up device and adminqShannon Nelson1-0/+47
Set up the basic adminq and notifyq queue structures. These are used mostly by the client drivers for feature configuration. These are essentially the same adminq and notifyq as in the ionic driver. Part of this includes querying for device identity and FW information, so we can make that available to devlink dev info. $ devlink dev info pci/0000:b5:00.0 pci/0000:b5:00.0: driver pds_core serial_number FLM18420073 versions: fixed: asic.id 0x0 asic.rev 0x0 running: fw 1.51.0-73 stored: fw.goldfw 1.15.9-C-22 fw.mainfwa 1.60.0-73 fw.mainfwb 1.60.0-57 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add devlink health facilitiesShannon Nelson1-0/+12
Add devlink health reporting on top of our fw watchdog. Example: # devlink health show pci/0000:2b:00.0 reporter fw pci/0000:2b:00.0: reporter fw state healthy error 0 recover 0 # devlink health diagnose pci/0000:2b:00.0 reporter fw Status: healthy State: 1 Generation: 0 Recoveries: 0 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: initial framework for pds_core PF driverShannon Nelson2-0/+36
This is the initial PCI driver framework for the new pds_core device driver and its family of devices. This does the very basics of registering for the new PF PCI device 1dd8:100c, setting up debugfs entries, and registering with devlink. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21ipv6: add icmpv6_error_anycast_as_unicast for ICMPv6Mahesh Bandewar1-0/+7
ICMPv6 error packets are not sent to the anycast destinations and this prevents things like traceroute from working. So create a setting similar to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast). Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net/mlx5e: Add vnic devlink health reporter to representorsMaher Sanalla1-1/+4
Create a new devlink health reporter for representor interface, which reports the values of representor vnic diagnostic counters when diagnosed. This patch will allow admins to monitor VF diagnostic counters through the representor-interface vnic reporter. Example of usage: $ devlink health diagnose pci/0000:08:00.0/65537 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-21net/mlx5: Add vnic devlink health reporter to PFs/VFsMaher Sanalla1-0/+30
Create a vnic devlink health reporter for PFs/VFs interfaces. The reporter's diagnose callback displays the values of vNIC/vport transport debug counters of PFs/VFs, as follows: $ devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 Moreover, add documentation on the reporter functionality and the counters description. While at it, expose the vNIC counters diagnose function to be used by the downstream patch, which will reveal the counters for representor interfaces. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+15
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20net/handshake: Add a kernel API for requesting a TLSv1.3 handshakeChuck Lever2-0/+218
To enable kernel consumers of TLS to request a TLS handshake, add support to net/handshake/ to request a handshake upcall. This patch also acts as a template for adding handshake upcall support for other kernel transport layer security providers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-18ice: document RDMA devlink parametersJacob Keller1-0/+15
Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce devlink param") added support for the enable_roce and enable_iwarp parameters in the ice driver. It didn't document these parameters in the ice devlink documentation file. Add this documentation, including a note about the mutual exclusion between the two modes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-15page_pool: allow caching from safely localized NAPIJakub Kicinski1-0/+1
Recent patches to mlx5 mentioned a regression when moving from driver local page pool to only using the generic page pool code. Page pool has two recycling paths (1) direct one, which runs in safe NAPI context (basically consumer context, so producing can be lockless); and (2) via a ptr_ring, which takes a spin lock because the freeing can happen from any CPU; producer and consumer may run concurrently. Since the page pool code was added, Eric introduced a revised version of deferred skb freeing. TCP skbs are now usually returned to the CPU which allocated them, and freed in softirq context. This places the freeing (producing of pages back to the pool) enticingly close to the allocation (consumer). If we can prove that we're freeing in the same softirq context in which the consumer NAPI will run - lockless use of the cache is perfectly fine, no need for the lock. Let drivers link the page pool to a NAPI instance. If the NAPI instance is scheduled on the same CPU on which we're freeing - place the pages in the direct cache. With that and patched bnxt (XDP enabled to engage the page pool, sigh, bnxt really needs page pool work :() I see a 2.6% perf boost with a TCP stream test (app on a different physical core than softirq). The CPU use of relevant functions decreases as expected: page_pool_refill_alloc_cache 1.17% -> 0% _raw_spin_lock 2.41% -> 0.98% Only consider lockless path to be safe when NAPI is scheduled - in practice this should cover majority if not all of steady state workloads. It's usually the NAPI kicking in that causes the skb flush. The main case we'll miss out on is when application runs on the same CPU as NAPI. In that case we don't use the deferred skb free path. Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net: docs: update the sample code in driver.rstJakub Kicinski1-34/+27
The sample code talks about single-queue devices and uses locks. Update it to something resembling more modern code. Make sure we mention use of READ_ONCE() / WRITE_ONCE(). Change the comment which talked about consumer on the xmit side. AFAIU xmit is the producer and completions are a consumer. Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-11net: provide macros for commonly copied lockless queue stop/wake codeJakub Kicinski1-0/+6
A lot of drivers follow the same scheme to stop / start queues without introducing locks between xmit and NAPI tx completions. I'm guessing they all copy'n'paste each other's code. The original code dates back all the way to e1000 and Linux 2.6.19. Smaller drivers shy away from the scheme and introduce a lock which may cause deadlocks in netpoll. Provide macros which encapsulate the necessary logic. The macros do not prevent false wake ups, the extra barrier required to close that race is not worth it. See discussion in: https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/ Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11docs: net: use C syntax highlight in driver.rstJakub Kicinski1-10/+20
Use syntax highlight, comment out the "..." since they are not valid C. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11docs: net: move the probe and open/close sections of driver.rst upJakub Kicinski1-27/+27
Somehow it feels more right to start from the probe then open, then tx... Much like the lifetime of the driver itself. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11docs: net: reformat driver.rst from a list to sectionsJakub Kicinski1-35/+56
driver.rst had a historical form of list of common problems. In the age os Sphinx and rendered documentation it's better to use the more usual title + text format. This will allow us to render kdoc into the output more naturally. No changes to the actual text. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-07tcp: restrict net.ipv4.tcp_app_winYueHaibing1-0/+2
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23 shift exponent 255 is too large for 32-bit type 'int' CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x136/0x150 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0 tcp_init_transfer.cold+0x3a/0xb9 tcp_finish_connect+0x1d0/0x620 tcp_rcv_state_process+0xd78/0x4d60 tcp_v4_do_rcv+0x33d/0x9d0 __release_sock+0x133/0x3b0 release_sock+0x58/0x1b0 'maxwin' is int, shifting int for 32 or more bits is undefined behaviour. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-30Documentation/eth/intel: Remove references to SourceForgeTony Nguyen11-51/+1
The out-of-tree driver is hosted on SourceForge, as this does not apply to the kernel driver remove references to it. Also do some minor formatting changes around this section. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2023-03-30Documentation/eth/intel: Update address for driver supportTony Nguyen11-11/+11
Update the email address for support to use Intel Wired LAN, the mailing list used for kernel development. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
2023-03-28net/mlx5e: RX, Remove unnecessary recycle parameter and page_cache statsDragos Tatulea1-26/+0
The recycle parameter used during page release is no longer necessary: the page pool can detect when the page cannot be recycled to the cache or ring without any outside hint. The page pool will also take care of cleaning up after itself once all the inflight pages have been released. So no need to explicitly release pages to the system. Remove the internal page_cache stats as the mlx5e_page_cache struct no longer exists. Delete the documentation entries along with the stats. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-03-28ethtool: Add support for configuring tx_push_buf_lenShay Agroskin1-16/+31
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+5
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24docs: networking: document NAPIJakub Kicinski6-8/+261
Add basic documentation about NAPI. We can stop linking to the ancient doc on the LF wiki. Link: https://lore.kernel.org/all/20230315223044.471002-1-kuba@kernel.org/ Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> # for ctucanfd-driver.rst Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230322053848.198452-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver supportJesper Dangaard Brouer1-2/+5
When driver doesn't implement a bpf_xdp_metadata kfunc the fallback implementation returns EOPNOTSUPP, which indicate device driver doesn't implement this kfunc. Currently many drivers also return EOPNOTSUPP when the hint isn't available, which is ambiguous from an API point of view. Instead change drivers to return ENODATA in these cases. There can be natural cases why a driver doesn't provide any hardware info for a specific hint, even on a frame to frame basis (e.g. PTP). Lets keep these cases as separate return codes. When describing the return values, adjust the function kernel-doc layout to get proper rendering for the return values. Fixes: ab46182d0dcb ("net/mlx4_en: Support RX XDP metadata") Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata") Fixes: 306531f0249f ("veth: Support RX XDP metadata") Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoul Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-19ixgb: Remove ixgb driverTony Nguyen2-469/+0
There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16net/mlx5e: Add devlink hairpin queues parametersGal Pressman2-0/+47
We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-28Merge tag 'net-6.3-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-25docs: net: fix inaccuracies in msg_zerocopy.rstnick black1-3/+3
Replace "sendpage" with "sendfile". Remove comment about ENOBUFS when the sockopt hasn't been set; experimentation indicates that this is not true. Signed-off-by: nick black <dankamongmen@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/Y/gg/EhIIjugLdd3@schwarzgerat.orthanc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds1-52/+52
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-16sfc: add devlink info support for ef100Alejandro Lucero2-0/+58
Add devlink info support for ef100. The information reported is obtained through the MCDI interface with the specific meaning defined in new documentation file. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16Merge tag 'mlx5-updates-2023-02-10' of ↵Jakub Kicinski1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-02-10 1) From Roi and Mark: MultiPort eswitch support MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort Eswitch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. 2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic 2.1) Cleanups related to mlx5's devlink port logic 2.2) Move devlink port registration to be done before netdev alloc 2.3) Create auxdev devlink instance in the same ns as parent devlink 2.4) Suspend auxiliary devices only in case of PCI device suspend * tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Suspend auxiliary devices only in case of PCI device suspend net/mlx5: Remove "recovery" arg from mlx5_load_one() function net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink net/mlx5e: Move devlink port registration to be done before netdev alloc net/mlx5e: Move dl_port to struct mlx5e_dev net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port net/mlx5e: Pass mdev to mlx5e_devlink_port_register() net/mlx5: Remove outdated comment net/mlx5e: TC, Remove redundant parse_attr argument net/mlx5e: Use a simpler comparison for uplink rep net/mlx5: Lag, Add single RDMA device in multiport mode net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode net/mlx5: E-Switch, rename bond update function to be reused net/mlx5e: TC, Add peer flow in mpesw mode net/mlx5: Lag, Control MultiPort E-Switch single FDB mode ==================== Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16devlink: Update devlink health documentationMoshe Shemesh1-2/+21
Update devlink-health.rst file: - Add devlink formatted message (fmsg) API documentation. - Add auto-dump as a condition to do dump once error reported. - Expand OOB to clarify this acronym. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net/mlx5: Lag, Control MultiPort E-Switch single FDB modeRoi Dayan1-0/+18
MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort E-Switch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. Example: $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \ cmode runtime Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-13net: ethtool: extend ringparam set/get APIs for rx_pushShannon Nelson1-2/+4
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09net: txgbe: Update support email addressJiawen Wu1-1/+1
Update new email address for Wangxun 10Gb NIC support team. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-04net/mlx5: Document support for RoCE HCA disablement capabilityRahul Rameshbabu1-3/+5
Some mlx5 devices are capable of disabling RoCE. In this situation, disablement does not need to be handled at the driver level. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-04net/mlx5: Add counter information to mlx5 driver documentationRahul Rameshbabu2-0/+1303
Update rst file to contain general information about statistics counters for the mlx5 driver. Add specifics about individual counters in list tables. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-04net/mlx5: Document previously implemented mlx5 tracepointsRahul Rameshbabu1-3/+24
Tracepoints were previously implemented but not documented till this patch series. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-04net/mlx5: Update Kconfig parameter documentationRahul Rameshbabu2-29/+100
Provide information for Kconfig flags defined but not documented till this patch series for the mlx5 driver. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-04net/mlx5: Separate mlx5 driver documentation into multiple pagesRahul Rameshbabu7-747/+792
The mlx5 device driver documentation page has grown in size and should be split into multiple subpages. This change also contains a table of contents for these new subpages. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02neighbor: fix proxy_delay usage when it is zeroBrian Haley1-0/+8
When set to zero, the neighbor sysctl proxy_delay value does not cause an immediate reply for ARP/ND requests as expected, it instead causes a random delay between [0, U32_MAX). Looking at this comment from __get_random_u32_below() explains the reason: /* * This function is technically undefined for ceil == 0, and in fact * for the non-underscored constant version in the header, we build bug * on that. But for the non-constant case, it's convenient to have that * evaluate to being a straight call to get_random_u32(), so that * get_random_u32_inclusive() can work over its whole range without * undefined behavior. */ Added helper function that does not call get_random_u32_below() if proxy_delay is zero and just uses the current value of jiffies instead, causing pneigh_enqueue() to respond immediately. Also added definition of proxy_delay to ip-sysctl.txt since it was missing. Signed-off-by: Brian Haley <haleyb.dev@gmail.com> Link: https://lore.kernel.org/r/20230130171428.367111-1-haleyb.dev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>