summaryrefslogtreecommitdiff
path: root/Documentation/scsi
AgeCommit message (Collapse)AuthorFilesLines
2017-04-06scsi: make asynchronous aborts mandatoryHannes Reinecke1-12/+6
There hasn't been any reports for HBAs where asynchronous abort would not work, so we should make it mandatory and remove the fallback. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-06scsi: make eh_eflags persistentHannes Reinecke1-7/+7
If a failed command is retried and fails again we need to enter SCSI EH, otherwise we will never be able to recover the command. To detect this situation we must not clear scmd->eh_eflags when EH finishes but rather make it persistent throughout the lifetime of the command. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-28scripts/spelling.txt: add "varible" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: varible||variable While we are here, tidy up the comment blocks that fit in a single line for drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c and net/sctp/transport.c. Link: http://lkml.kernel.org/r/1481573103-11329-11-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-22Merge branch 'misc' into for-linusJames Bottomley1-23/+23
2016-12-09scsi: g_NCR5380: Autoprobe board IRQ by defaultFinn Thain1-23/+23
Automatically probe the board irq when no irq parameter is provided, to simulate PnP. The old default behaviour was to disable the irq. Update driver documentation accordingly and add some printk messages to make this behaviour visible. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab3-3/+3
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-30scsi: g_NCR5380: Stop using scsi_module.cOndrej Zary1-3/+21
Convert g_NCR5380 to use scsi_add_host instead of scsi_module.c Use pnp_driver and isa_driver to manage cards. In order to support multiple cards, new module parameter format is introduced. The old parameters are kept for compatibility. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-30scsi: g_NCR5380: Remove deprecated __setupOndrej Zary1-10/+0
Remove deprecated __setup for parsing command line parameters. g_NCR5380.* parameters could be used instead. This might break existing setups with g_NCR5380 built-in (if there are any). But it has to go in order to remove the overrides[] array. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: dtc: remove from treeChristoph Hellwig2-46/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: t128: remove from treeChristoph Hellwig1-3/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: pas16: remove from treeChristoph Hellwig1-3/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: u14-34f: remove from treeChristoph Hellwig1-3/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: in2000: remove from treeChristoph Hellwig3-207/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-27scsi: wd7000: remove from treeChristoph Hellwig1-3/+0
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-02scsi: smartpqi: add smartpqi.txtDon Brace1-0/+80
added Documentation/scsi/smartpqi.txt [mkp: applied by hand] Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-31scsi: Documentation/scsi: Remove nodisconnect parameterFinn Thain1-2/+0
The driver that used the 'nodisconnect' parameter was removed in commit 565bae6a4a8f ("[SCSI] 53c7xx: kill driver"). Related documentation was cleaned up in commit f37a7238d379 ("[SCSI] 53c7xx: fix removal fallout"), except for the remaining two mentions that are removed here. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-06-18Merge remote-tracking branch 'mkp-scsi/4.7/scsi-fixes' into fixesJames Bottomley1-2/+6
2016-06-09scsi: fix race between simultaneous decrements of ->host_failedWei Fang1-2/+6
sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c5657 ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <fangwei1@huawei.com> Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-28Merge branch 'for-next' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ...
2016-05-20Merge tag 'docs-for-linus' of git://git.lwn.net/linuxLinus Torvalds2-25/+25
Pull Documentation updates from Jon Corbet: "A bit busier this time around. The most interesting thing (IMO) this time around is some beginning infrastructural work to allow documents to be written using restructured text. Maybe someday, in a galaxy far far away, we'll be able to eliminate the DocBook dependency and have a much better integrated set of kernel docs. Someday. Beyond that, there's a new document on security hardening from Kees, the movement of some sample code over to samples/, a number of improvements to the serial docs from Geert, and the usual collection of corrections, typo fixes, etc" * tag 'docs-for-linus' of git://git.lwn.net/linux: (55 commits) doc: self-protection: provide initial details serial: doc: Use port->state instead of info serial: doc: Always refer to tty_port->mutex Documentation: vm: Spelling s/paltform/platform/g Documentation/memcg: update kmem limit doc as codes behavior docproc: print a comment about autogeneration for rst output docproc: add support for reStructuredText format via --rst option docproc: abstract terminating lines at first space docproc: abstract docproc directive detection docproc: reduce unnecessary indentation docproc: add variables for subcommand and filename kernel-doc: use rst C domain directives and references for types kernel-doc: produce RestructuredText output kernel-doc: rewrite usage description, remove duplicated comments Doc: correct the location of sysrq.c Documentation: fix common spelling mistakes samples: v4l: from Documentation to samples directory samples: connector: from Documentation to samples directory Documentation: xillybus: fix spelling mistake Documentation: x86: fix spelling mistakes ...
2016-05-10tcm_qla2xxx Add SCSI command jammer/discard capabilityLaurence Oberman1-0/+22
This patch introduces support for TCM_QLA2XXX_DEBUG and associated tcm_qla2xxx_tpg->tpg_attrib.jam_host checking used to test dropped packets to FC host environments. Tested by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-04-28Documentation: fix common spelling mistakesKees Cook1-1/+1
This fixes several spelling mistakes in the Documentation/ tree, which are caught by checkpatch.pl's spell checking. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-04-28Documentation: scsi: fix spelling mistakesEric Engestrom1-24/+24
Signed-off-by: Eric Engestrom <eric@engestrom.ch> [jc: fixed trailing whitespace errors] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-04-11ncr5380: Update usage documentationFinn Thain2-13/+15
Update kernel parameter documentation for atari_scsi, mac_scsi and g_NCR5380 drivers. Remove duplication. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24st: Fix MTMKPART to work with newer drivesKai Makisara1-5/+10
Change the MTMKPART operation of the MTIOCTOP ioctl so that it works also with current drives (LTO-5/6, etc.). Send a separate FORMAT MEDIUM command if the partition mode page indicates that this is required. Use LOAD to position the tape at the beginning of tape. The operation is extended so that if the argument is negative, its absolute value specifies the size of partition 0, which is the physically first partition of the tape. Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Tested-by: Shane M Seymour <shane.seymour@hpe.com> Tested-by: Laurence Oberman <loberman@redhat.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-10st: allow debug output to be enabled or disabled via sysfsSeymour, Shane M1-1/+3
Change st driver to allow enabling or disabling debug output via sysfs file /sys/bus/scsi/drivers/st/debug_flag. Previously the only way to enable debug output was: 1. loading the driver with the module parameter debug_flag=1 2. an ioctl call (this method was also the only way to dynamically disable debug output). To use the ioctl you need a second tape drive (if you are actively testing the first tape drive) since a second process cannot open the first tape drive if it is in use. The this change is only functional if the value of the macro DEBUG in st.c is a non-zero value (which it is by default). Signed-off-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Laurence Oberman <oberman.l@gmail.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-26Merge branch 'for-4.2/sg' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull asm/scatterlist.h removal from Jens Axboe: "We don't have any specific arch scatterlist anymore, since parisc finally switched over. Kill the include" * 'for-4.2/sg' of git://git.kernel.dk/linux-block: remove scatterlist.h generation from arch Kbuild files remove <asm/scatterlist.h>
2015-06-02st: implement tape statisticsSeymour, Shane M1-0/+59
This patch implements tape statistics in the st module via sysfs. Current no statistics are available for tape I/O and there is no easy way to reuse the block layer statistics for tape as tape is a character device and does not have perform I/O in sector sized chunks (the size of the data written to tape can change). For tapes we also need extra stats related to things like tape movement (via other I/O). There have been multiple end users requesting statistics including AT&T (and some HP customers who have not given permission to be named). It is impossible for them to investigate any issues related to tape performance in a non-invasive way. [jejb: eliminate PRId64] Signed-off-by: Shane Seymour <shane.seymour@hp.com> Tested-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-03-05genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirelyValentin Rothberg2-29/+0
The IRQF_DISABLED flag is a NOOP and has been scheduled for removal since Linux v2.6.36 by commit 6932bf37bed4 ("genirq: Remove IRQF_DISABLED from core code"). According to commit e58aa3d2d0cc ("genirq: Run irq handlers with interrupts disabled"), running IRQ handlers with interrupts enabled can cause stack overflows when the interrupt line of the issuing device is still active. This patch ends the grace period for IRQF_DISABLED (i.e., SA_INTERRUPT in older versions of Linux) and removes the definition and all remaining usages of this flag. There's still a few non-functional references left in the kernel source: - The bigger hunk in Documentation/scsi/ncr53c8xx.txt is removed entirely as IRQF_DISABLED is gone now; the usage in older kernel versions (including the old SA_INTERRUPT flag) should be discouraged. The trouble of using IRQF_SHARED is a general problem and not specific to any driver. - I left the reference in Documentation/PCI/MSI-HOWTO.txt untouched since it has already been removed in linux-next. - All remaining references are changelogs that I suggest to keep. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Cc: Afzal Mohammed <afzal@ti.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ewan Milne <emilne@redhat.com> Cc: Eyal Perry <eyalpe@mellanox.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Hongliang Tao <taohl@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Keerthy <j-keerthy@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Lambert <lambert.quentin@gmail.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Sricharan R <r.sricharan@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: iss_storagedev@hp.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Link: http://lkml.kernel.org/r/1425565425-12604-1-git-send-email-valentinrothberg@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-11-27libsas: remove task_collector modeChristoph Hellwig1-78/+4
The task_collector mode (or "latency_injector", (C) Dan Willians) is an optional I/O path in libsas that queues up scsi commands instead of directly sending it to the hardware. It generall increases latencies to in the optiomal case slightly reduce mmio traffic to the hardware. Only the obsolete aic94xx driver and the mvsas driver allowed to use it without recompiling the kernel, and most drivers didn't support it at all. Remove the giant blob of code to allow better optimizations for scsi-mq in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-11-25wd719x: Add firmware documentationOndrej Zary1-0/+21
Add documentation and script to obtain required firmware. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-10/+10
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-20Merge Linus' tree to be be to apply submitted patches to newer code thanJiri Kosina2-2/+15
current trivial.git base
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-8/+4
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-37/+1
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12st: add a debug_flag module parameter requestLaurence Oberman1-3/+5
This patch adds a debug_flag parameter that can be set on module load, and allows the DEBUG facility without a module recompile. Note that now DEBUG 1 is the default with this patch. Usage: modprobe st debug_flag=1 Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Kai M??kisara <kai.makisara@kolumbus.fi> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-29scsi: Fix "choir" and "beeing" malapropsFinn Thain1-2/+2
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-21Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds1-2/+1
Pull email address change from Boaz Harrosh. * 'for-linus' of git://git.open-osd.org/linux-open-osd: Boaz Harrosh - fix email in Documentation Boaz Harrosh - Fix broken email address MAINTAINERS: Change Boaz Harrosh's email
2014-10-19Boaz Harrosh - fix email in DocumentationBoaz Harrosh1-2/+1
I forgot to update Documentation/*.txt Signed-off-by: Boaz Harrosh <ooo@electrozaur.com>
2014-09-16megaraid_sas: Version and Changelog updateAdam Radford1-0/+14
The following patch for megaraid_sas updates the driver version and Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by: Adam Radford <aradford@gmail.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
2014-07-18scsi: Remove CONFIG_SCSI_MULTI_LUNHannes Reinecke1-2/+0
Obsolete; either use 'max_lun' if the host supports only a limited number of LUNs or BLIST_NOLUN if the target has problems addressing more than one LUN. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-19scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY'Paul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-19qla2xxx: Change copyright year to 2014 in all the source files.Armen Baloyan1-1/+1
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] megaraid_sas: Version and Changelog updateadam radford1-0/+13
The following patch for megaraid_sas updates the driver version to v06.803.01.00-rc1, and updates Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-02-11Documentation/: update 00-INDEX filesHenrik Austad1-0/+16
Some of the 00-INDEX files are somewhat outdated and some folders does not contain 00-INDEX at all. Only outdated (with the notably exception of spi) indexes are touched here, the 169 folders without 00-INDEX has not been touched. New 00-INDEX - spi/* was added in a series of commits dating back to 2006 Added files (missing in (*/)00-INDEX) - dmatest.txt was added by commit 851b7e16a07d ("dmatest: run test via debugfs") - this_cpu_ops.txt was added by commit a1b2a555d637 ("percpu: add documentation on this_cpu operations") - ww-mutex-design.txt was added by commit 040a0a371005 ("mutex: Add support for wound/wait style locks") - bcache.txt was added by commit cafe56359144 ("bcache: A block layer cache") - kernel-per-CPU-kthreads.txt was added by commit 49717cb40410 ("kthread: Document ways of reducing OS jitter due to per-CPU kthreads") - phy.txt was added by commit ff764963479a ("drivers: phy: add generic PHY framework") - block/null_blk was added by commit 12f8f4fc0314 ("null_blk: documentation") - module-signing.txt was added by commit 3cafea307642 ("Add Documentation/module-signing.txt file") - assoc_array.txt was added by commit 3cb989501c26 ("Add a generic associative array implementation.") - arm/IXP4xx was part of the initial repo - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28e839 ("ARM: mcpm: introduce helpers for platform coherency exit/setup") - arm/firmware.txt was added by commit 7366b92a77fc ("ARM: Add interface for registering and calling firmware-specific operations") - arm/kernel_mode_neon.txt was added by commit 2afd0a05241d ("ARM: 7825/1: document the use of NEON in kernel mode") - arm/tcm.txt was added by commit bc581770cfdd ("ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3") - arm/vlocks.txt was added by commit 9762f12d3e05 ("ARM: mcpm: Add baremetal voting mutexes") - blackfin/gptimers-example.c, Makefile was added by commit 4b60779d5ea7 ("Blackfin: add an example showing how to use the gptimers API") - devicetree/usage-model.txt was added by commit 31134efc681a ("dt: Linux DT usage model documentation") - fb/api.txt was added by commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API") - fb/sm501.txt was added by commit e6a049807105 ("video, sm501: add edid and commandline support") - fb/udlfb.txt was added by commit 96f8d864afd6 ("fbdev: move udlfb out of staging.") - filesystems/Makefile was added by commit 1e0051ae48a2 ("Documentation/fs/: split txt and source files") - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit 8a4c6e19cfed ("nfsd: document kernel interfaces for nfsd configuration") - ide/warm-plug-howto.txt was added by commit f74c91413ec6 ("ide: add warm-plug support for IDE devices (take 2)") - laptops/Makefile was added by commit d49129accc21 ("Documentation/laptop/: split txt and source files") - leds/leds-blinkm.txt was added by commit b54cf35a7f65 ("LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS") - leds/ledtrig-oneshot.txt was added by commit 5e417281cde2 ("leds: add oneshot trigger") - leds/ledtrig-transient.txt was added by commit 44e1e9f8e705 ("leds: add new transient trigger for one shot timer activation") - m68k/README.buddha was part of the initial repo - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits 40839129f779, c4e84bde1d59, 5a4faa873782 - networking/Makefile was added by commit 3794f3e812ef ("docsrc: build Documentation/ sources") - networking/i40evf.txt was added by commit 105bf2fe6b32 ("i40evf: add driver to kernel build system") - networking/ipsec.txt was added by commit b3c6efbc36e2 ("xfrm: Add file to document IPsec corner case") - networking/mac80211-auth-assoc-deauth.txt was added by commit 3cd7920a2be8 ("mac80211: add auth/assoc/deauth flow diagram") - networking/netlink_mmap.txt was added by commit 5683264c3981 ("netlink: add documentation for memory mapped I/O") - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e1597f ("netfilter: doc: add nf_conntrack sysctl api documentation") lan) - networking/team.txt was added by commit 3d249d4ca7d0 ("net: introduce ethernet teaming device") - networking/vxlan.txt was added by commit d342894c5d2f ("vxlan: virtual extensible lan") - power/runtime_pm.txt was added by commit 5e928f77a09a ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)") - power/charger-manager.txt was added by commit 3bb3dbbd56ea ("power_supply: Add initial Charger-Manager driver") - RCU/lockdep-splat.txt was added by commit d7bd2d68aa2e ("rcu: Document interpretation of RCU-lockdep splats") - s390/kvm.txt was added by 5ecee4b (KVM: s390: API documentation) - s390/qeth.txt was added by commit b4d72c08b358 ("qeth: bridgeport support - basic control") - scheduler/sched-bwc.txt was added by commit 88ebc08ea9f7 ("sched: Add documentation for bandwidth control") - scsi/advansys.txt was added by commit 4bd6d7f35661 ("[SCSI] advansys: Move documentation to Documentation/scsi") - scsi/bfa.txt was added by commit 1ec90174bdb4 ("[SCSI] bfa: add readme file") - scsi/bnx2fc.txt was added by commit 12b8fc10eaf4 ("[SCSI] bnx2fc: Add driver documentation") - scsi/cxgb3i.txt was added by commit c3673464ebc0 ("[SCSI] cxgb3i: Add cxgb3i iSCSI driver.") - scsi/hpsa.txt was added by commit 992ebcf14f3c ("[SCSI] hpsa: Add hpsa.txt to Documentation/scsi") - scsi/link_power_management_policy.txt was added by commit ca77329fb713 ("[libata] Link power management infrastructure") - scsi/osd.txt was added by commit 78e0c621deca ("[SCSI] osd: Documentation for OSD library") - scsi/scsi-parameter.txt was created/moved by commit 163475fb111c ("Documentation: move SCSI parameters to their own text file") - serial/driver was part of the initial repo - serial/n_gsm.txt was added by commit 323e84122ec6 ("n_gsm: add a documentation") - timers/Makefile was added by commit 3794f3e812ef ("docsrc: build Documentation/ sources") - virt/kvm/s390.txt was added by commit d9101fca3d57 ("KVM: s390: diagnose call documentation") - vm/split_page_table_lock was added by commit 49076ec2ccaf ("mm: dynamically allocate page->ptl if it cannot be embedded to struct page") - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4e2ae ("w1: Add 1-wire slave device driver for DS28E04-100") - w1/masters/omap-hdq was added by commit e0a29382c6f5 ("hdq: documentation for OMAP HDQ") - x86/early-microcode.txt was added by commit 0d91ea86a895 ("x86, doc: Documentation for early microcode loading") - x86/earlyprintk.txt was added by commit a1aade478862 ("x86/doc: mini-howto for using earlyprintk=dbgp") - x86/entry_64.txt was added by commit 8b4777a4b50c ("x86-64: Document some of entry_64.S") - x86/pat.txt was added by commit d27554d874c7 ("x86: PAT documentation") Moved files - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by commit 37b8304642c7 ("ARM: kuser: move interface documentation out of the source code") - efi-stub.txt was moved out of x86/ and down into Documentation/ in commit 4172fe2f8a47 ("EFI stub documentation updates") - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit efcfed9bad88 ("Move hp_accel to drivers/platform/x86") - commit 5616c23ad9cd ("x86: doc: move x86-generic documentation from Doc/x86/i386"): * x86/usb-legacy-support.txt * x86/boot.txt * x86/zero_page.txt - power/video_extension.txt was moved to acpi in commit 70e66e4df191 ("ACPI / video: move video_extension.txt to Documentation/acpi") Removed files (left in 00-INDEX) - memory.txt was removed by commit 00ea8990aadf ("memory.txt: remove stray information") - gpio.txt was moved to gpio/ in commit fd8e198cfcaa ("Documentation: gpiolib: document new interface") - networking/DLINK.txt was removed by commit 168e06ae26dd ("drivers/net: delete old parallel port de600/de620 drivers") - serial/hayes-esp.txt was removed by commit f53a2ade0bb9 ("tty: esp: remove broken driver") - s390/TAPE was removed by commit 9e280f669308 ("[S390] remove tape block docu") - vm/locking was removed by commit 57ea8171d2bc ("mm: documentation: remove hopelessly out-of-date locking doc") - laptops/acer-wmi.txt was remvoed by commit 020036678e81 ("acer-wmi: Delete out-of-date documentation") Typos/misc issues - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit 030d794bf498 ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.") - commit b88cf73d9278 ("net: add missing entries to Documentation/networking/00-INDEX") * generic-hdlc.txt was added as generic_hdlc.txt * spider_net.txt was added as spider-net.txt - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31") - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a407e ("[S390] Add Documentation/s390/00-INDEX.") Signed-off-by: Henrik Austad <henrik@austad.us> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [rcu bits] Acked-by: Rob Landley <rob@landley.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Gleb Natapov <gleb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Len Brown <len.brown@intel.com> Cc: James Bottomley <JBottomley@parallels.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25Merge tag 'rdma-for-linus' of ↵Linus Torvalds2-0/+33
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.14: - Flow steering for InfiniBand UD traffic - IP-based addressing for IBoE aka RoCE - Pass SRP submaintainership from Dave to Bart - SRP transport fixes from Bart - Add the new Cisco usNIC low-level device driver - Various other fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (75 commits) IB/mlx5: Verify reserved fields are cleared IB/mlx5: Remove old field for create mkey mailbox IB/mlx5: Abort driver cleanup if teardown hca fails IB/mlx5: Allow creation of QPs with zero-length work queues mlx5_core: Fix PowerPC support mlx5_core: Improve debugfs readability IB/mlx5: Add support for resize CQ IB/mlx5: Implement modify CQ IB/mlx5: Make sure doorbell record is visible before doorbell mlx5_core: Use mlx5 core style warning IB/mlx5: Clear out struct before create QP command mlx5_core: Fix out arg size in access_register command RDMA/nes: Slight optimization of Ethernet address compare IB/qib: Fix QP check when looping back to/from QP1 RDMA/cxgb4: Fix gcc warning on 32-bit arch IB/usnic: Remove unused includes of <linux/version.h> RDMA/amso1100: Add check if cache memory was allocated before freeing it IPoIB: Report operstate consistently when brought up without a link IB/core: Fix unused variable warning RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal() ...
2014-01-21scsi_transport_srp: Add rport state diagramBart Van Assche2-0/+33
Add a diagram in Documentation/scsi/scsi_transport_srp that illustrates the rport state transitions. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-19[SCSI] Update documentationHannes Reinecke2-32/+46
The documentation has gone out-of-sync, so update it to the current status. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>