| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-10
The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.
The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.
Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.
2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.
The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.
* tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits)
can: gs_usb: add VID/PID for ABE CAN Debugger devices
can: gs_usb: add VID/PID for CES CANext FD devices
can: gs_usb: add extended bt_const feature
can: gs_usb: activate quirks for CANtact Pro unconditionally
can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
can: gs_usb: add usb quirk for NXP LPC546xx controllers
can: gs_usb: add CAN-FD support
can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
can: gs_usb: support up to 3 channels per device
can: gs_usb: gs_usb_probe(): introduce udev and make use of it
can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
can: gs_usb: document the USER_ID feature
can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
can: gs_usb: add HW timestamp mode bit
can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
can: gs_usb: rewrap error messages
can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
can: gs_usb: sort include files alphabetically
can: gs_usb: fix checkpatch warning
...
====================
Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/dsa/dsa2.c
commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/
drivers/net/ethernet/intel/ice/ice.h
commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/
drivers/staging/gdm724x/gdm_lte.c
commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
|
|
Document support for rcar_canfd on R8A779A0 (V3U) SoCs.
Link: https://lore.kernel.org/all/20220309162609.3726306-5-uli+renesas@fpond.eu
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.
The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.
Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()
Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.
This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.
/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.
Tested:
100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.
Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)
~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96005
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
65,945.29 msec task-clock # 2.845 CPUs utilized
1,314,632 context-switches # 19935.279 M/sec
5,292 cpu-migrations # 80.249 M/sec
940,641 page-faults # 14264.023 M/sec
201,117,030,926 cycles # 3049769.216 GHz (83.45%)
17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%)
136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%)
53,809,530,436 instructions # 0.27 insn per cycle
# 2.54 stalled cycles per insn (83.36%)
9,062,315,523 branches # 137422329.563 M/sec (83.22%)
153,008,621 branch-misses # 1.69% of all branches (83.32%)
23.182970846 seconds time elapsed
TcpInSegs 15648792 0.0
TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered 58654791 0.0
TcpExtTCPDeliveredCE 19 0.0
After patch:
~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96046
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
48,982.58 msec task-clock # 2.104 CPUs utilized
186,014 context-switches # 3797.599 M/sec
3,109 cpu-migrations # 63.472 M/sec
941,180 page-faults # 19214.814 M/sec
153,459,763,868 cycles # 3132982.807 GHz (83.56%)
12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%)
120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%)
36,803,672,106 instructions # 0.24 insn per cycle
# 3.27 stalled cycles per insn (83.18%)
5,947,266,275 branches # 121417383.427 M/sec (83.64%)
87,984,616 branch-misses # 1.48% of all branches (83.43%)
23.281200256 seconds time elapsed
TcpInSegs 1434706 0.0
TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered 58878971 0.0
TcpExtTCPDeliveredCE 9664 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix pinctrl node name warnings in examples
- Add missing 'mux-states' property in ti,tcan104x-can binding
* tag 'devicetree-fixes-for-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: phy: ti,tcan104x-can: Document mux-states property
dt-bindings: mfd: Fix pinctrl node name warnings
|
|
On some boards, for routing CAN signals from controller to transceivers,
muxes might need to be set. This can be implemented using mux-states
property. Therefore, document the same in the respective bindings.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211216041012.16892-2-a-govindraju@ti.com
|
|
The recent addition pinctrl.yaml in commit c09acbc499e8 ("dt-bindings:
pinctrl: use pinctrl.yaml") resulted in some node name warnings:
Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \
lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \
codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \
pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Fix the node names to the preferred 'pinctrl'. For cirrus,madera,
nothing from pinctrl.yaml schema is used, so just drop the reference.
Fixes: c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml")
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org
|
|
Revert DPI support from binding.
DPI support relies on the bus-type enum which does not yet support
Mipi DPI, since no v4l2_fwnode_bus_type has been defined for this
bus type.
When DPI for anx7625 was initially added, it assumed that
V4L2_FWNODE_BUS_TYPE_PARALLEL was the correct bus type for
representing DPI, which it is not.
In order to prevent adding this mis-usage to the ABI, let's revert
the support.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
|
|
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since bit 57 was exported for uffd-wp write-protected (commit
fb8e37f35a2f: "mm/pagemap: export uffd-wp protection information"),
fixing it can reduce some unnecessary confusion.
Link: https://lkml.kernel.org/r/20220301044538.3042713-1-yun.zhou@windriver.com
Fixes: fb8e37f35a2fe1 ("mm/pagemap: export uffd-wp protection information")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Cc: Florian Schmidt <florian.schmidt@nutanix.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Colin Cross <ccross@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Realtek rtl8365mb DSA driver can use these two tag formats.
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend dt-bindings for sparx5 with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
for LAN8814 phy
Supports configuring latency values and also adds
check for phy timestamping feature.
Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stephen reported the following warning messages from smc-sysctl.rst
Documentation/networking/smc-sysctl.rst:3: WARNING: Title overline
too short.
Documentation/networking/smc-sysctl.rst: WARNING: document isn't
included in any toctree
Fix the title overline and add smc-sysctl entry into
Documentation/networking/index.rst
Fixes: 12bbb0d163a9 ("net/smc: add sysctl for autocorking")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220303113527.62047-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for the tod_correction, clock_status_drift,
and clock_status_offset nodes.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the new stats API, kernel config parameter, and stats structure
information to the page_pool documentation.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This add a new sysctl: net.smc.autocorking_size
We can dynamically change the behaviour of autocorking
by change the value of autocorking_size.
Setting to 0 disables autocorking in SMC
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DeviceTree fixes for v5.17
The SDX65 platform and MTP device was added twice to the DT binding,
this drops one of the occurances.
* tag 'qcom-dts-fixes-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Link: https://lore.kernel.org/r/20220301033838.1801689-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code changes address mostly minor problems:
- Several NXP/FSL SoC driver fixes, addressing issues with error
handling and compilation
- Fix a clock disabling imbalance in gpcv2 driver.
- Arm Juno DMA coherency issue
- Trivial firmware driver fixes for op-tee and scmi firmware
The remaining changes address issues in the devicetree files:
- A timer regression for the OMAP devkit8000, which has to use the
alternative timer.
- A hang in the i.MX8MM power domain configuration
- Multiple fixes for the Rockchip RK3399 addressing issues with sound
and eMMC
- Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124"
* tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: tegra: Move panels to AUX bus
soc: imx: gpcv2: Fix clock disabling imbalance in error path
soc: fsl: qe: Check of ioremap return value
soc: fsl: qe: fix typo in a comment
soc: fsl: guts: Add a missing memory allocation failure check
soc: fsl: guts: Revert commit 3c0d64e867ed
soc: fsl: Correct MAINTAINERS database (SOC)
soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY)
soc: fsl: Replace kernel.h with the necessary inclusions
dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a
dt-bindings: qoriq-clock: add missing compatible for lx2160a
ARM: dts: Use 32KiHz oscillator on devkit8000
ARM: dts: switch timer config to common devkit8000 devicetree
tee: optee: fix error return code in probe function
arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required
arm64: dts: imx8mm: Fix VPU Hanging
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
ARM: dts: rockchip: reorder rk322x hmdi clocks
firmware: arm_scmi: Remove space in MODULE_ALIAS name
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
...
|
|
Update the link to the "Software Techniques for Managing Speculation
on AMD Processors" whitepaper.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Add a missing colon to fix the document style.
Fixes: 88691e9e1ef5 ("bpf, docs: Split general purpose eBPF documentation out of filter.rst")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220228080416.1689327-1-wanjiabing@vivo.com
|
|
Pull dma-mapping fix from Christoph Hellwig:
- fix a swiotlb info leak (Halil Pasic)
* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix info leak with DMA_FROM_DEVICE
|
|
After change "net: dsa: tag_8021q: replace the SVL bridging with
VLAN-unaware IVL bridging", tag_8021q enforces two different pvids on a
port, depending on whether it is standalone or in a VLAN-unaware bridge.
Up until now, there was a single pvid, represented by
dsa_tag_8021q_rx_vid(), and that was used as the VLAN for VLAN-unaware
virtual link rules, regardless of whether the port was bridged or
standalone.
To keep VLAN-unaware virtual links working, we need to follow whether
the port is in a bridge or not, and update the VLAN ID from those rules.
In fact we can't fully do that. Depending on whether the switch is
VLAN-aware or not, we can accept Virtual Link rules with just the MAC
DA, or with a MAC DA and a VID. So we already deny changes to the VLAN
awareness of the switch. But the VLAN awareness may also change as a
result of joining or leaving a bridge.
One might say we could just allow the following: a port may leave a
VLAN-unaware bridge while it has VLAN-unaware VL (tc-flower) rules, and
the driver will update those with the new tag_8021q pvid for standalone
mode, but the driver won't accept joining a bridge at all while VL rules
were installed in standalone mode. This is sort of a compromise made
because leaving a bridge is an operation that cannot be vetoed.
But this sort of setup change is not fully supported, either: as
mentioned, VLAN filtering changes can also be triggered by leaving a
bridge, therefore, the existing veto we have in place for turning VLAN
filtering off with VLAN-aware VL rules active still isn't fully
effective.
I really don't know how to deal with this in a way that produces
predictable behavior for user space. Since at the moment, keeping this
feature fully functional on constellation changes (not changing the
tag_8021q port pvid when joining a bridge) is blocking progress for the
DSA FDB isolation, I'd rather document it as a (potentially temporary)
limitation and go on without it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
|
|
Currently, --entries uses -e as the short version in the hist mode of
timerlat and osnoise tools. But as -e is already used to enable events
on trace sessions by other tools, thus let's keep it available for the
same usage for all rtla tools.
Make -E the short version of --entries for hist mode on all tools.
Note: rtla was merged in this merge window, so rtla was not released yet.
Link: https://lkml.kernel.org/r/5dbf0cbe7364d3a05e708926b41a097c59a02b1e.1645206561.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the throttle IRQ handling during cpufreq initialization on
Qualcomm platforms (Bjorn Andersson)"
* tag 'pm-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fixes for v5.17
- Add missing SoC compatible in existing binding
- Replace kernel.h with the necessary inclusions
- MAINTAINERS file fixes
- Fix memory allocation failure check in guts driver
- Various cleanups and minor fixes
* tag 'soc-fsl-fix-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qe: Check of ioremap return value
soc: fsl: qe: fix typo in a comment
soc: fsl: guts: Add a missing memory allocation failure check
soc: fsl: guts: Revert commit 3c0d64e867ed
soc: fsl: Correct MAINTAINERS database (SOC)
soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY)
soc: fsl: Replace kernel.h with the necessary inclusions
dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a
dt-bindings: qoriq-clock: add missing compatible for lx2160a
Link: https://lore.kernel.org/r/20220219012208.21835-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
tools/testing/selftests/net/mptcp/mptcp_join.sh
34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
857898eb4b28 ("selftests: mptcp: add missing join check")
6ef84b1517e0 ("selftests: mptcp: more robust signal race test")
https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c
fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions")
c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information")
09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr")
84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr")
efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow")
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 host:
- Expose KVM_CAP_ENABLE_CAP since it is supported
- Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode
- Ensure async page fault token is nonzero
- Fix lockdep false negative
- Fix FPU migration regression from the AMX changes
x86 guest:
- Don't use PV TLB/IPI/yield on uniprocessor guests
PPC:
- reserve capability id (topic branch for ppc/kvm)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled
KVM: x86/mmu: make apf token non-zero to fix bug
KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
x86/kvm: Fix compilation warning in non-x86_64 builds
x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
KVM: Fix lockdep false negative during host resume
KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.17, round 2:
- Drop reset signal from i.MX8MM vpumix power domain to fix a system
hang.
- Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP
device tree.
- Fix a clock disabling imbalance in gpcv2 driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for 5.18-rc6 from Viresh Kumar:
"This fixes issues related to throttle IRQ for Qcom SoCs."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Delay enabling throttle_irq
cpufreq: Reintroduce ready() callback
|
|
Since commit
| 1f9234401ce0 ("dt-bindings: can: add can-controller.yaml")
there is a common CAN controller binding. Add this to the m_can
binding.
Link: https://lore.kernel.org/all/20220124220653.3477172-4-mkl@pengutronix.de
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes the indention of the table in the description of the
bosch,mram-cfg property.
Link: https://lore.kernel.org/all/20220217101111.2291151-1-mkl@pengutronix.de
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since Sriram Dash's email bounces, change the maintainer entry to
Chandrasekar Ramakrishnan. Chandrasekar Ramakrishnan is already listed
as a maintainer in the MAINTAINERS file.
Link: https://lore.kernel.org/all/20220217113839.2311417-1-mkl@pengutronix.de
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit
| 1f9234401ce0 ("dt-bindings: can: add can-controller.yaml")
there is a common CAN controller binding. Add this to the sun4i_can
binding.
Link: https://lore.kernel.org/all/20220124220653.3477172-3-mkl@pengutronix.de
Cc: Evgeny Boger <boger@wirenboard.com>
Cc: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit
| 1f9234401ce0 ("dt-bindings: can: add can-controller.yaml")
there is a common CAN controller binding. Add this to the mcp251xfd
binding.
Link: https://lore.kernel.org/all/20220124220653.3477172-2-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support to set completion queue event size via ethtool -G
parameter and get it via ethtool -g parameter.
~ # ./ethtool -G eth0 cqe-size 512
~ # ./ethtool -g eth0
Ring parameters for eth0:
Pre-set maximums:
RX: 1048576
RX Mini: n/a
RX Jumbo: n/a
TX: 1048576
Current hardware settings:
RX: 256
RX Mini: n/a
RX Jumbo: n/a
TX: 4096
RX Buf Len: 2048
CQE Size: 128
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link: https://lkml.kernel.org/r/YhZsZxqk+IaFxorj@kernel.org
Fixes: 496082df01bb08a4 ("rtla: Add rtla osnoise man page")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Update some maintainers email addresses
- Fix handling of elfcorehdr reservation for crash dump kernel
- Fix unittest expected warnings text
* tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: update Roger Quadros email
MAINTAINERS: sifive: drop Yash Shah
of/fdt: move elfcorehdr reservation early for crash dump kernel
of: unittest: update text of expected warnings
|
|
Emails to Roger Quadros TI account bounce with:
550 Invalid recipient <rogerq@ti.com> (#5.1.1)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220221100701.48593-1-krzysztof.kozlowski@canonical.com
|
|
Emails to Yash Shah bounce with "The email account that you tried to
reach does not exist.", so drop him from all maintainer entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220214082349.162973-1-krzysztof.kozlowski@canonical.com
|
|
By request of Nick Piggin:
> Patch 3 requires a KVM_CAP_PPC number allocated. QEMU maintainers are
> happy with it (link in changelog) just waiting on KVM upstreaming. Do
> you have objections to the series going to ppc/kvm tree first, or
> another option is you could take patch 3 alone first (it's relatively
> independent of the other 2) and ppc/kvm gets it from you?
|
|
Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL
resource mode to 3 with the H_SET_MODE hypercall. This capability
differs between processor types and KVM types (PR, HV, Nested HV), and
affects guest-visible behaviour.
QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and
use the KVM CAP if available to determine KVM support[2].
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.
For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.
Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the doc with the new fun.
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
