| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Mobileye SoCs
- unified GPR/CP0 regs handling for uasm
- cleanups and fixes
* tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits)
mips: cm: Convert __mips_cm_phys_base() to weak function
mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function
mips: dts: ralink: mt7621: add cell count properties to usb
mips: dts: ralink: mt7621: add serial1 and serial2 nodes
mips: dts: ralink: mt7621: reorder serial0 properties
mips: dts: ralink: mt7621: associate uart1_pins with serial0
MIPS: ralink: Don't use "proxy" headers
mips: sibyte: make tb_class constant
mips: mt: make mt_class constant
MIPS: ralink: Remove unused of_gpio.h
bus: bt1-apb: Remove duplicate include
MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
MIPS: mipsregs: Parse fp and sp register by name in parse_r
tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
mips: zboot: Fix "no previous prototype" build warning
MIPS: mipsregs: Set proper ISA level for virt extensions
MIPS: Implement microMIPS MT ASE helpers
MIPS: Limit MIPS_MT_SMP support by ISA reversion
MIPS: Loongson64: test for -march=loongson3a cflag
MIPS: BMIPS: Drop unnecessary assembler flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Constify sdw_bus and sdw_master_type objects
- use of rtd helper for better code
- intel aux device remove redundant assignment
* tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
soundwire: constify the struct device_type usage
soundwire: bus_type: make sdw_bus_type const
soundwire: intel_auxdevice: remove redundant assignment to variable link_flags
soundwire: stream: add missing const to Documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Minor changes to the I2C core. Most changes are in drivers:
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations, such as
isolating faulty channels and flushing stuck buses, among others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4"
* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: sprd: Convert to platform remove callback returning void
Documentation: i2c: Document that client auto-detection is a legacy mechanism
i2c: remove redundant condition
i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
i2c: cadence: Add system suspend and resume PM support
i2c: mpc: remove outdated macro
i2c: mpc: use proper binding for transfer timeouts
dt-bindings: i2c: mpc: use proper binding for transfer timeouts
i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
i2c: constify the struct device_type usage
i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
i2c: designware: Use accessors to DW_IC_INTR_MASK register
i2c: designware: Do not enable interrupts shortly in polling mode
i2c: designware: Uniform initialization flow for polling mode
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
i2c: Remove redundant comparison in npcm_i2c_reg_slave
...
|
|
Convert Samsung SoC Keypad bindings to DT schema with changes:
1. Rename "linux,keypad-no-autorepeat" property to
"linux,input-no-autorepeat", because the latter was implemented in
the Linux driver.
2. Add clocks and clock-names, already used by DTS and the Linux driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240312183001.714626-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB budget legacy API was finally documented. It took only 20+ years
to get some documentation about it...
- hantro driver has gained support for STM32MP25 VDEC/VENC
- rkisp1 has gained support for i.MX8MP
- atomisp got rid of two items from its todo list. Still 5 items
pending for moving it out of staging
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
media: rcar-isp: Disallow unbind of devices
media: usbtv: Remove useless locks in usbtv_video_free()
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
media: ttpci: fix two memleaks in budget_av_attach
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
media: usb: s2255: Refactor s2255_get_fx2fw
media: ti: j721e-csi2rx: Convert to platform remove callback returning void
media: stm32-dcmipp: Convert to platform remove callback returning void
media: nxp: imx8-isi: Convert to platform remove callback returning void
media: nuvoton: Convert to platform remove callback returning void
media: chips-media: wave5: Convert to platform remove callback returning void
media: chips-media: wave5: Remove unnecessary semicolons
media: i2c: imx290: Fix IMX920 typo
media: platform: replace of_graph_get_next_endpoint()
media: i2c: replace of_graph_get_next_endpoint()
media: ivsc: csi: Make use of sub-device state
media: ivsc: csi: Swap SINK and SOURCE pads
media: ipu-bridge: Serialise calls to IPU bridge init
...
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
On riscv, mmap currently returns an address from the largest address
space that can fit entirely inside of the hint address. This makes it
such that the hint address is almost never returned. This patch raises
the mappable area up to and including the hint address. This allows mmap
to often return the hint address, which allows a performance improvement
over searching for a valid address as well as making the behavior more
similar to other architectures.
Note that a previous patch introduced stronger semantics compared to
other architectures for riscv mmap. On riscv, mmap will not use bits in
the upper bits of the virtual address depending on the hint address. On
other architectures, a random address is returned in the address space
requested. On all architectures the hint address will be returned if it
is available. This allows riscv applications to configure how many bits
in the virtual address should be left empty. This has the two benefits
of being able to request address spaces that are smaller than the
default and doesn't require the application to know the page table
layout of riscv.
* b4-shazam-merge:
docs: riscv: Define behavior of mmap
selftests: riscv: Generalize mm selftests
riscv: mm: Use hint address in mmap if available
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-0-8a655cfa8bcb@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Yu Chien Peter Lin <peterlin@andestech.com> says:
This patch series introduces the Andes PMU extension, which serves the
same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
is assigned to bit 18 in the custom S-mode local interrupt enable and
pending registers (slie/slip), while the interrupt cause is (256 + 18).
* b4-shazam-merge:
riscv: andes: Support specifying symbolic firmware and hardware raw events
riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
dt-bindings: riscv: Add Andes PMU extension description
perf: RISC-V: Introduce Andes PMU to support perf event sampling
perf: RISC-V: Eliminate redundant interrupt enable/disable operations
riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
dt-bindings: riscv: Add Andes interrupt controller compatible string
riscv: errata: Rename defines for Andes
Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
imx6q has additional regulators compared to imx6ul. Add them to the list
of allowed patterns.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add passthrough mode for regular file I/O.
This allows performing read and write (also via memory maps) on a
backing file without incurring the overhead of roundtrips to
userspace. For now this is only allowed to privileged servers, but
this limitation will go away in the future (Amir Goldstein)
- Fix interaction of direct I/O mode with memory maps (Bernd Schubert)
- Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)
- Allow resending queued requests for server crash recovery (Zhao Chen)
- Misc fixes and cleanups
* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
fuse: get rid of ff->readdir.lock
fuse: remove unneeded lock which protecting update of congestion_threshold
fuse: Fix missing FOLL_PIN for direct-io
fuse: remove an unnecessary if statement
fuse: Track process write operations in both direct and writethrough modes
fuse: Use the high bit of request ID for indicating resend requests
fuse: Introduce a new notification type for resend pending requests
fuse: add support for explicit export disabling
fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
fuse: fix typo for fuse_permission comment
fuse: Convert fuse_writepage_locked to take a folio
fuse: Remove fuse_writepage
virtio_fs: remove duplicate check if queue is broken
fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
fuse: don't unhash root
fuse: fix root lookup with nonzero generation
fuse: replace remaining make_bad_inode() with fuse_make_bad()
virtiofs: drop __exit from virtio_fs_sysfs_exit()
fuse: implement passthrough for mmap
fuse: implement splice read/write passthrough
...
|
|
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
|
|
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
|
|
Pick up documentation build fix for v6.9.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
Stephen reported that an htmldocs build hit:
Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation.
It turns out that line was fine but the tool was unhappy about some line
breaks in the table of values to error types.
It turns out that:
make V=1 SPHINXDIRS="admin-guide" htmldocs
...can not be used to get more info about what is behind a documentation
build error. It was only pure luck that reflowing the text resulted in
an error message that seemed a imply a problem later on with line breaks
around the table.
Fixes: 8039804cfa73 ("cxl/core: Add CXL EINJ debugfs files")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"x86 kprobes:
- Use boolean for some function return instead of 0 and 1
- Prohibit probing on INT/UD. This prevents user to put kprobe on
INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a
special purpose in the kernel
- Boost Grp instructions. Because a few percent of kernel
instructions are Grp 2/3/4/5 and those are safe to be executed
without ip register fixup, allow those to be boosted (direct
execution on the trampoline buffer with a JMP)
tracing:
- Add function argument access from return events (kretprobe and
fprobe). This allows user to compare how a data structure field is
changed after executing a function. With BTF, return event also
accepts function argument access by name.
- Fix a wrong comment (using "Kretprobe" in fprobe)
- Cleanup a big probe argument parser function into three parts, type
parser, post-processing function, and main parser
- Cleanup to set nr_args field when initializing trace_probe instead
of counting up it while parsing
- Cleanup a redundant #else block from tracefs/README source code
- Update selftests to check entry argument access from return probes
- Documentation update about entry argument access from return
probes"
* tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add entry argument access at function exit
selftests/ftrace: Add test cases for entry args at function exit
tracing/probes: Support $argN in return probe (kprobe and fprobe)
tracing: Remove redundant #else block for BTF args from README
tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init
tracing/probes: Cleanup probe argument parser
tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event
x86/kprobes: Boost more instructions from grp2/3/4/5
x86/kprobes: Prohibit kprobing on INT and UD
x86/kprobes: Refactor can_{probe,boost} return type to bool
|
|
Add microchip,sam9x7-pmecc to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223172520.671940-1-varshini.rajendran@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Some miscellaneous improvements, including new KUnit tests, extended
documentation and boot help, and some cosmetic cleanups.
Additional test changes already went through the net tree"
* tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
samples/landlock: Don't error out if a file path cannot be opened
landlock: Use f_cred in security_file_open() hook
landlock: Rename "ptrace" files to "task"
landlock: Simplify current_check_access_socket()
landlock: Warn once if a Landlock action is requested while disabled
landlock: Extend documentation for kernel support
landlock: Add support for KUnit tests
selftests/landlock: Clean up error logs related to capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- New acer-wmi HW support
- Support for new revision of amd/pmf heartbeat notify
- Correctly handle asus-wmi HW without LEDs
- fujitsu-laptop battery charge control support
- Support for new hp-wmi thermal profiles
- Support ideapad-laptop refresh rate key
- Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
allow entry into low-power modes, and temporarily removed Lunar Lake
SSRAM support due to breaking FW changes causing probe fail (further
breaking FW changes are still pending)
- Report pmc/punit_atom devices that prevent reacing low power levels
- Surface Fan speed function support
- Support for more sperial keys and complete the list of models with
non-standard fan registers in thinkpad_acpi
- New DMI touchscreen HW support
- Continued modernization efforts of wmi
- Removal of obsoleted ledtrig-audio call and the related dependency
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
platform/x86/intel/pmc: Improve PKGC residency counters debug
platform/x86: asus-wmi: Consider device is absent when the read is ~0
Documentation/x86/amd/hsmp: Updating urls
platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
platform/x86/amd/pmf: Add support to get sps default APTS index values
platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
platform/x86/amd/pmf: Add support to notify sbios heart beat event
platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
platform/x86/amd/pmf: Disable debugfs support for querying power thermals
platform/x86/amd/pmf: Differentiate PMF ACPI versions
x86/platform/atom: Check state of Punit managed devices on s2idle
platform/x86: pmc_atom: Check state of PMC clocks on s2idle
platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
platform/x86: pmc_atom: Annotate d3_sts register bit defines
clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
platform/x86: make fw_attr_class constant
platform/x86/intel/tpmi: Change vsec offset to u64
platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
platform/x86: intel_scu_wdt: Remove unused intel-mid.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Kinetic KTD2801 Backlight
Fix-ups:
- Fix include lists; alphabetise, remove unused, explicitly add used
- Device Tree binding adaptions/conversions/creation
- Use dev_err_probe() to clean-up error paths
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
Bug Fixes:
- Fix changes of NULL pointer dereference
- Remedy a bunch of logic errors
- Initialise (zero) Backlight properties data structures"
* tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
backlight: pandora_bl: Drop unneeded ENOMEM error message
backlight: lm3630a_bl: Simplify probe return on gpio request error
backlight: lm3630a_bl: Handle deferred probe
backlight: as3711_bl: Handle deferred probe
backlight: bd6107: Handle deferred probe
backlight: l4f00242t03: Simplify with dev_err_probe()
backlight: gpio: Simplify with dev_err_probe()
backlight: lp8788: Fully initialize backlight_properties during probe
backlight: lm3639: Fully initialize backlight_properties during probe
backlight: da9052: Fully initialize backlight_properties during probe
backlight: lm3630a: Use backlight_get_brightness helper in update_status
backlight: lm3630a: Don't set bl->props.brightness in get_brightness
backlight: lm3630a: Initialize backlight_properties on init
backlight: mp3309c: Fully initialize backlight_properties during probe
backlight: mp3309c: Utilise temporary variable for struct device
backlight: mp3309c: Use dev_err_probe() instead of dev_err()
backlight: mp3309c: Make use of device properties
dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
backlight: hx8357: Utilise temporary variable for struct device
backlight: hx8357: Make use of dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- New driver for GPIO based 7-segment LED display (Chris Packham)
- New driver for Maxim MAX6958/6959 I²C 7-segment LED display
controller
- Refactor linedisp library to make the above happen
- Update Holtek HT16k33 driver to follow the linedisp refactoring
- Convert .remove to return void in platform drivers (Uwe Kleine-König)
- Fix DT schemas (Krzysztof Kozlowski)
- Refresh MAINTAINERS database
* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
auxdisplay: hd44780: Convert to platform remove callback returning void
auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
auxdisplay: seg-led-gpio: Import linedisp namespace
dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
auxdisplay: Add 7-segment LED display driver
auxdisplay: Add driver for MAX695x 7-segment LED controllers
dt-bindings: auxdisplay: Add Maxim MAX6958/6959
auxdisplay: ht16k33: Drop struct ht16k33_seg
auxdisplay: ht16k33: Switch to use line display character mapping
auxdisplay: ht16k33: Define a few helper macros
auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
auxdisplay: ht16k33: Add default to switch-cases
auxdisplay: linedisp: Allocate buffer for the string
auxdisplay: linedisp: Add support for overriding character mapping
auxdisplay: linedisp: Provide struct linedisp_ops for future extension
auxdisplay: linedisp: Move exported symbols to a namespace
auxdisplay: linedisp: Add missing header(s)
auxdisplay: linedisp: Unshadow error codes in ->store()
auxdisplay: linedisp: Use unique number for id
...
|
|
Define mmap on riscv to not provide an address that uses more bits than
the hint address, if provided.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-3-8a655cfa8bcb@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Update the numeric footnotes so that they are rendered as hyperlinks in
the html output.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Stephen reports new warnings in the docs:
Documentation/networking/multi-pf-netdev.rst:94: ERROR: Unexpected indentation.
Documentation/networking/multi-pf-netdev.rst:106: ERROR: Unexpected indentation.
Fixes: 77d9ec3f6c8c ("Documentation: networking: Add description for multi-pf netdev")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20240312153304.0ef1b78e@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240313032329.3919036-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
Add a tracepoint for downcasting private errors to standard errors, so
they can be recovered even when not logged; also, add some
documentation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
|
|
Pull xfs updates from Chandan Babu:
- Online repair updates:
- More ondisk structures being repaired:
- Inode's mode field by trying to obtain file type value from
the a directory entry
- Quota counters
- Link counts of inodes
- FS summary counters
- Support for in-memory btrees has been added to support repair
of rmap btrees
- Misc changes:
- Report corruption of metadata to the health tracking subsystem
- Enable indirect health reporting when resources are scarce
- Reduce memory usage while repairing refcount btree
- Extend "Bmap update" intent item to support atomic extent
swapping on the realtime device
- Extend "Bmap update" intent item to support extended attribute
fork and unwritten extents
- Code cleanups:
- Bmap log intent
- Btree block pointer checking
- Btree readahead
- Buffer target
- Symbolic link code
- Remove mrlock wrapper around the rwsem
- Convert all the GFP_NOFS flag usages to use the scoped
memalloc_nofs_save() API instead of direct calls with the GFP_NOFS
- Refactor and simplify xfile abstraction. Lower level APIs in shmem.c
are required to be exported in order to achieve this
- Skip checking alignment constraints for inode chunk allocations when
block size is larger than inode chunk size
- Do not submit delwri buffers collected during log recovery when an
error has been encountered
- Fix SEEK_HOLE/DATA for file regions which have active COW extents
- Fix lock order inversion when executing error handling path during
shrinking a filesystem
- Remove duplicate ifdefs
* tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits)
xfs: shrink failure needs to hold AGI buffer
mm/shmem.c: Use new form of *@param in kernel-doc
kernel-doc: Add unary operator * to $type_param_ref
xfs: use kvfree() in xlog_cil_free_logvec()
xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL
xfs: fix scrub stats file permissions
xfs: fix log recovery erroring out on refcount recovery failure
xfs: move symlink target write function to libxfs
xfs: move remote symlink target read function to libxfs
xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
xfs: xfs_bmap_finish_one should map unwritten extents properly
xfs: support deferred bmap updates on the attr fork
xfs: support recovering bmap intent items targetting realtime extents
xfs: add a realtime flag to the bmap update log redo items
xfs: add a xattr_entry helper
xfs: fix xfs_bunmapi to allow unmapping of partial rt extents
xfs: move xfs_bmap_defer_add to xfs_bmap_item.c
xfs: reuse xfs_bmap_update_cancel_item
xfs: add a bi_entry helper
xfs: remove xfs_trans_set_bmap_flags
...
|
|
Typos are bad. Fix them.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge additional thermal control changes for 6.9-rc1 from Daniel Lezcano:
"- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for H616 THS controller for the Sun8i platforms. Note
that this change relies on another change in the SoC specific code
which is included in this branch (Martin Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the driver (Geert Uytterhoeven)"
* tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
|
|
'clk-microchip' into clk-next
* clk-remove:
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
* clk-amlogic:
clk: meson: Add missing clocks to axg_clk_regmaps
* clk-qcom: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
* clk-parent:
clk: Fix clk_core_get NULL dereference
* clk-microchip:
clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
clk: microchip: mpfs: add missing MSSPLL outputs
clk: microchip: mpfs: setup for using other mss pll outputs
clk: microchip: mpfs: split MSSPLL in two
dt-bindings: can: mpfs: add missing required clock
dt-bindings: clock: mpfs: add more MSSPLL output definitions
|
|
'clk-allwinner' into clk-next
* clk-aspeed:
clk: ast2600: Add FSI parent clock with correct rate
dt-bindings: clock: ast2600: Add FSI clock
* clk-keystone:
clk: keystone: sci-clk: Adding support for non contiguous clocks
* clk-mobileye:
dt-bindings: reset: mobileye,eyeq5-reset: add bindings
dt-bindings: clock: mobileye,eyeq5-clk: add bindings
clk: fixed-factor: add fwname-based constructor functions
clk: fixed-factor: add optional accuracy support
* clk-allwinner:
clk: sunxi: usb: fix kernel-doc warnings
clk: sunxi: sun9i-cpus: fix kernel-doc warnings
clk: sunxi: a20-gmac: fix kernel-doc warnings
|
|
and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Fix some static checker errors in the hisilicon clk driver
* clk-renesas: (25 commits)
clk: renesas: r8a779h0: Add RPC-IF clock
clk: renesas: r8a779h0: Add SYS-DMAC clocks
clk: renesas: r8a779h0: Add SDHI clock
clk: renesas: r8a779h0: Add EtherAVB clocks
clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
...
* clk-cleanup:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: ti: dpll3xxx: use correct function names in kernel-doc
clk: clocking-wizard: Remove redundant initialization of pointer div_addr
clk: keystone: sci-clk: match func name comment to actual
clk: cdce925: Remove redundant assignment to variable 'rate'
MAINTAINERS: drop Sekhar Nori
* clk-hisilicon:
clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: mediatek: add infracfg reset controller for mt7988
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
* clk-bulk:
clk: Provide managed helper to get and enable bulk clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Small bug fixes and device tree updates. No new features"
* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis_i2c: Add compatible string nuvoton,npct75x
tpm_tis: Add compatible string atmel,at97sc3204
tpm_tis_spi: Add compatible string atmel,attpm20p
dt-bindings: tpm: Add compatible string atmel,attpm20p
tpm,tpm_tis: Avoid warning splat at shutdown
tpm/tpm_ftpm_tee: fix all kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These modify the ACPI device events and processor enumeration code to
take the 'enabled' _STA bit into account as mandated by the ACPI
specification, convert several platform drivers to using a remove
callback that returns void, add some new quirks for ACPI IRQ override
and other things, address assorted issues and clean up code.
Specifics:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki)
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki)
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki)
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu)
- Constify acpi_bus_type (Ricardo Marliere)
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye)
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King)
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede)
- Make the ACPI backlight code handle fetching EDID that is longer
than 256 bytes (Mario Limonciello)
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik)
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König)
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki)
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath)
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White)
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan)"
* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: CPPC: Use access_width over bit_width for system memory accesses
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: APEI: GHES: Convert to platform remove callback returning void
ACPI: property: Polish ignoring bad data nodes
ACPI: thermal_lib: Initialize temp_decik to zero
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
|
