summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2016-08-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2-3/+3
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
2016-08-08Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-0/+1
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe2-3/+3
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linuxLinus Torvalds16-34/+31
Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help'
2016-08-07Merge tag 'binfmt-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
2016-08-07Merge branch 'for-linus-2' of ↵Linus Torvalds3-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
2016-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-16/+37
Pull more KVM updates from Paolo Bonzini: - ARM bugfix and MSI injection support - x86 nested virt tweak and OOPS fix - Simplify pvclock code (vdso bits acked by Andy Lutomirski). * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: nvmx: mark ept single context invalidation as supported nvmx: remove comment about missing nested vpid support KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off KVM: documentation: fix KVM_CAP_X2APIC_API information x86: vdso: use __pvclock_read_cycles pvclock: introduce seqcount-like API arm64: KVM: Set cpsr before spsr on fault injection KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype KVM: arm/arm64: Enable MSI routing KVM: arm/arm64: Enable irqchip routing KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header KVM: irqchip: Convey devid to kvm_set_msi KVM: Add devid in kvm_kernel_irq_routing_entry KVM: api: Pass the devid in the msi routing entry
2016-08-06Merge tag 'pwm/for-4.8-rc1' of ↵Linus Torvalds7-4/+99
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ...
2016-08-06Merge tag 'pstore-v4.8-rc1' of ↵Linus Torvalds2-15/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fixes from Kees Cook: "Fixes for pstore ramoops driver to catch bad kfree() and to use better DT bindings" * tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: use persistent_ram_free() instead of kfree() for freeing prz ramoops: use DT reserved-memory bindings
2016-08-06Merge branch 'for-linus' of ↵Linus Torvalds4-0/+74
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev
2016-08-05ramoops: use DT reserved-memory bindingsKees Cook2-15/+31
Instead of a ramoops-specific node, use a child node of /reserved-memory. This requires that of_platform_device_create() be explicitly called for the node, though, since "/reserved-memory" does not have its own "compatible" property. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rob Herring <robh@kernel.org>
2016-08-05Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-0/+6
Pull nfsd updates from Bruce Fields: "Highlights: - Trond made a change to the server's tcp logic that allows a fast client to better take advantage of high bandwidth networks, but may increase the risk that a single client could starve other clients; a new sunrpc.svc_rpc_per_connection_limit parameter should help mitigate this in the (hopefully unlikely) event this becomes a problem in practice. - Tom Haynes added a minimal flex-layout pnfs server, which is of no use in production for now--don't build it unless you're doing client testing or further server development" * tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits) nfsd: remove some dead code in nfsd_create_locked() nfsd: drop unnecessary MAY_EXEC check from create nfsd: clean up bad-type check in nfsd_create_locked nfsd: remove unnecessary positive-dentry check nfsd: reorganize nfsd_create nfsd: check d_can_lookup in fh_verify of directories nfsd: remove redundant zero-length check from create nfsd: Make creates return EEXIST instead of EACCES SUNRPC: Detect immediate closure of accepted sockets SUNRPC: accept() may return sockets that are still in SYN_RECV nfsd: allow nfsd to advertise multiple layout types nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock nfsd/blocklayout: Make sure calculate signature/designator length aligned xfs: abstract block export operations from nfsd layouts SUNRPC: Remove unused callback xpo_adjust_wspace() SUNRPC: Change TCP socket space reservation SUNRPC: Add a server side per-connection limit SUNRPC: Micro optimisation for svc_data_ready SUNRPC: Call the default socket callbacks instead of open coding SUNRPC: lock the socket while detaching it ...
2016-08-05DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1Jani Nikula1-16/+10
Instead of a separate ignore flag, use the obvious DOCBOOKS="" to ignore all DocBook files. This is also in line with the Sphinx build being ignored if a non-empty DOCBOOKS make variable is specified on the make command line. This replaces the IGNORE_DOCBOOKS introduced in commit 547218864afb2745d9d137f005f3380ef96b26ab Author: Mauro Carvalho Chehab <mchehab@s-opensource.com> Date: Sat Jul 9 13:12:45 2016 -0300 doc-rst: add an option to ignore DocBooks when generating docs and aligns with commit 6387872c86ea6698ed8faa3ccad1d1bd60f762f7 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Jul 1 15:24:44 2016 +0300 Documentation/sphinx: skip build if user requested specific DOCBOOKS Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-04Merge tag 'media/v4.8-5' of ↵Linus Torvalds227-62538/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media DocBook removal and some fixups from Mauro Carvalho Chehab: - removal of the media DocBook (since it's all in Sphinx now) - videobuf2: Fix an allocation regression - a few fixes related to the CEC drivers * tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: fix off-by-one memset [media] staging: add MEDIA_SUPPORT dependency [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH [media] media: adv7180: Fix broken interrupt register access [media] vb2: Fix allocation size of dma_parms [media] vim2m: copy the other colorspace-related fields as well [media] adv7511: fix VIC autodetect doc-rst: Remove the media docbook
2016-08-04Merge tag 'modules-next-for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: extable.h: add stddef.h so "NULL" definition is not implicit modules: add ro_after_init support jump_label: disable preemption around __module_text_address(). exceptions: fork exception table content from module.h into extable.h modules: Add kernel parameter to blacklist modules module: Do a WARN_ON_ONCE() for assert module mutex not held Documentation/module-signing.txt: Note need for version info if reusing a key module: Invalidate signatures on force-loaded modules module: Issue warnings when tainting kernel module: fix redundant test. module: fix noreturn attribute for __module_put_and_exit()
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski2-20/+15
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04KVM: documentation: fix KVM_CAP_X2APIC_API informationPaolo Bonzini1-3/+4
The KVM_X2APIC_API_USE_32BIT_IDS feature applies to both KVM_SET_GSI_ROUTING and KVM_SIGNAL_MSI, but was not mentioned in the documentation for the latter ioctl. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini1-13/+33
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.
2016-08-04modules: Add kernel parameter to blacklist modulesPrarit Bhargava1-0/+3
Blacklisting a module in linux has long been a problem. The current procedure is to use rd.blacklist=module_name, however, that doesn't cover the case after the initramfs and before a boot prompt (where one is supposed to use /etc/modprobe.d/blacklist.conf to blacklist runtime loading). Using rd.shell to get an early prompt is hit-or-miss, and doesn't cover all situations AFAICT. This patch adds this functionality of permanently blacklisting a module by its name via the kernel parameter module_blacklist=module_name. [v2]: Rusty, use core_param() instead of __setup() which simplifies things. [v3]: Rusty, undo wreckage from strsep() [v4]: Rusty, simpler version of blacklisted() Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-doc@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04Documenation: update cgroup's document pathseokhoon.yoon14-19/+19
cgroup's document path is changed to "cgroup-v1". update it. Signed-off-by: seokhoon.yoon <iamyooon@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-04Documentation/sphinx: do not warn about missing tools in 'make help'Jani Nikula1-2/+2
Simply move the dochelp rule outside of the HAVE_SPHINX check, overriding the .DEFAULT rule for HAVE_SPHINX=0. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-03Input: add driver for SiS 9200 family I2C touchscreen controllersMika Penttilä2-0/+34
This is a driver for SiS 9200 family touchscreen controllers using I2C bus. Signed-off-by: Mika Penttilä <mika.penttila@nextfour.com> Acked-by: Tammy Tseng <tammy_tseng@sis.com> Acked-by: Yuger Yu <yuger_yu@sis.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-03Input: add driver for Silead touchscreensRobert Dolca1-0/+36
This driver adds support for Silead touchscreens. It has been tested with GSL1680 and GSL3680 touch panels. It supports ACPI and device tree enumeration. Screen resolution, the maximum number of fingers supported and firmware name are configurable. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Daniel Jansen <djaniboe@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-4/+170
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-03Merge tag 'for-linus-v4.8' of git://github.com/martinbrandenburg/linuxLinus Torvalds1-4/+46
Pull orangefs update from Martin Brandenburg: "Kernel side caching and executable bugfix This allows OrangeFS to utilize the dcache and adds an in kernel attribute cache. We previously used the user side client for this purpose. We see a modest performance increase on small file operations. For example, without the cache, compiling coreutils takes about 17 minutes. With the patch and a 50 millisecond timeout for dcache_timeout_msecs and getattr_timeout_msecs (the default), compiling coreutils takes about 6 minutes 20 seconds. On the same hardware, compiling coreutils on an xfs filesystem takes 90 seconds. We see similar improvements with mdtest and a test involving writing, reading, and deleting a large number of small files. Interested parties can review more data at the following URL. https://docs.google.com/spreadsheets/d/1v4aUeppKexIbRMz_Yn9k4eaM3uy2KCaPoe_93YKWOtA/pubhtml The eventual goal of this is to allow getdents to turn into a readdirplus to the OrangeFS server. The cache will be filled then, which should provide a performance benefit to the common case of readdir followed by getattr on each entry (i.e. ls -l). This also fixes a bug. When orangefs_inode_permission was added, it did not collect i_size from the OrangeFS server, since this presses an unnecessary load on the OrangeFS server. However, it left a case where i_size is never initialized. Then running an executable could fail. With this patch, size is always collected to be inserted into the cache. Thus the bug disappears. If this patch is not accepted during this merge window, we will send a one-line band-aid for this bug instead" * tag 'for-linus-v4.8' of git://github.com/martinbrandenburg/linux: Orangefs: update orangefs.txt orangefs: Account for jiffies wraparound. orangefs: Change default dcache and getattr timeout to 50 msec. orangefs: Allow dcache and getattr cache time to be configured. orangefs: Cache getattr results. orangefs: Use d_time to avoid excessive lookups
2016-08-03rapidio/tsi721: add messaging mbox selector parameterAlexandre Bounine1-0/+5
Add module parameter to allow load time configuration of available RapidIO messaging mailboxes (MBOX1 - MBOX4). Having a messaging MBOX selector mask allows to define which MBOXes are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03rapidio/tsi721: add PCIe MRRS override parameterAlexandre Bounine1-0/+7
Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow users to override configuration register value set during PCIe bus initialization. Performance of Tsi721 device as PCIe bus master can be improved if MRRS is set to its maximum value (4096 bytes). Some platforms have limitations for supported MRRS and therefore the default value should be preserved, unless it is known that given platform supports full set of MRRS values defined by PCI Express specification. Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03rapidio/tsi721_dma: add channel mask and queue size parametersAlexandre Bounine1-0/+14
Add module parameters to allow load time configuration of DMA channels. Depending on application, performance of DMA data transfers can benefit from adjusted sizes of buffer descriptor ring and/or transaction requests queue. Having HW DMA channel selector mask allows to define which channels (from seven available) are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03rapidio/documentation: fix mangled paragraph in mport_cdevAlexandre Bounine1-2/+1
Minor edits to correct parameter description. This patch is applicable to kernel versions starting from v4.6. Link: http://lkml.kernel.org/r/1469125134-16523-3-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03rapidio: add RapidIO channelized messaging driverAlexandre Bounine1-0/+119
Add channelized messaging driver to support native RapidIO messaging exchange between multiple senders/recipients on devices that use kernel RapidIO subsystem services. This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes messaging capabilities of RapidIO endpoint devices (mports) directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. This char mode device driver allows user-space applications to setup messaging communication channels using single shared RapidIO messaging mailbox. By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by RIONET Ethernet emulation driver). [weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()] Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: move ioctl interface and disk layout to uapi separatelyRyusuke Konishi2-2/+3
The header file "include/linux/nilfs2_fs.h" is composed of parts for ioctl and disk format, and both are intended to be shared with user space programs. This moves them to the uapi directory "include/uapi/linux" splitting the file to "nilfs2_api.h" and "nilfs2_ondisk.h". The following minor changes are accompanied by this migration: - nilfs_direct_node struct in nilfs2/direct.h is converged to nilfs2_ondisk.h because it's an on-disk structure. - inline functions nilfs_rec_len_from_disk() and nilfs_rec_len_to_disk() are moved to nilfs2/dir.c. Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03printk: add kernel parameter to control writes to /dev/kmsgBorislav Petkov2-0/+21
Add a "printk.devkmsg" kernel command line parameter which controls how userspace writes into /dev/kmsg. It has three options: * ratelimit - ratelimit logging from userspace. * on - unlimited logging from userspace * off - logging from userspace gets ignored The default setting is to ratelimit the messages written to it. This changes the kernel default setting of "on" to "ratelimit" and we do that because we want to keep userspace spamming /dev/kmsg to sane levels. This is especially moot when a small kernel log buffer wraps around and messages get lost. So the ratelimiting setting should be a sane setting where kernel messages should have a bit higher chance of survival from all the spamming. It additionally does not limit logging to /dev/kmsg while the system is booting if we haven't disabled it on the command line. Furthermore, we can control the logging from a lower priority sysctl interface - kernel.printk_devkmsg. That interface will succeed only if printk.devkmsg *hasn't* been supplied on the command line. If it has, then printk.devkmsg is a one-time setting which remains for the duration of the system lifetime. This "locking" of the setting is to prevent userspace from changing the logging on us through sysctl(2). This patch is based on previous patches from Linus and Steven. [bp@suse.de: fixes] Link: http://lkml.kernel.org/r/20160719072344.GC25563@nazgul.tnic Link: http://lkml.kernel.org/r/20160716061745.15795-3-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Dave Young <dyoung@redhat.com> Cc: Franck Bui <fbui@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Merge branch 'generic-zpos-v8' of ↵Dave Airlie1-0/+1
http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next Merge generic ZPOS property support, this was backed up behind some other changes I didn't have a stable branch point for. Now they are merged to Linus tree this pull is just drm patches. * 'generic-zpos-v8' of http://git.linaro.org/people/benjamin.gaignard/kernel: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-03Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds4-390/+190
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-03Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds8-2/+286
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-08-02Merge branch 'misc' of ↵Linus Torvalds1-1/+147
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild updates from Michal Marek: - coccicheck script improvements by Luis Rodriguez and Deepa Dinamani - new coccinelle patches by Yann Droneaud and Vaishali Thakkar - debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin Mielniczuk * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix the Debian packaging script on systems with no codename builddeb: fix file permissions before packaging scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci coccicheck: refer to Documentation/coccinelle.txt and wiki coccicheck: add support for requring a coccinelle version scripts: add Linux .cocciconfig for coccinelle coccicheck: replace --very-quiet with --quiet when debugging coccicheck: add support for DEBUG_FILE coccicheck: enable parmap support coccicheck: make SPFLAGS more useful coccicheck: move spatch binary check up builddeb: really include objtool binary in headers package coccinelle: catch krealloc() on devm_*() allocated memory coccinelle: recognize more devm_* memory allocation functions coccinelle: also catch kzfree() issues coccicheck: Allow for overriding spatch flags Coccinelle: noderef: Add new rules and correct the old rule
2016-08-02Merge branch 'kbuild' of ↵Linus Torvalds2-0/+88
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - GCC plugin support by Emese Revfy from grsecurity, with a fixup from Kees Cook. The plugins are meant to be used for static analysis of the kernel code. Two plugins are provided already. - reduction of the gcc commandline by Arnd Bergmann. - IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada - bin2c fix by Michael Tautschnig - setlocalversion fix by Wolfram Sang * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: gcc-plugins: disable under COMPILE_TEST kbuild: Abort build on bad stack protector flag scripts: Fix size mismatch of kexec_purgatory_size kbuild: make samples depend on headers_install Kbuild: don't add obj tree in additional includes Kbuild: arch: look for generated headers in obtree Kbuild: always prefix objtree in LINUXINCLUDE Kbuild: avoid duplicate include path Kbuild: don't add ../../ to include path vmlinux.lds.h: replace config_enabled() with IS_ENABLED() kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion kconfig.h: use already defined macros for IS_REACHABLE() define export.h: use __is_defined() to check if __KSYM_* is defined kconfig.h: use __is_defined() to check if MODULE is defined kbuild: setlocalversion: print error to STDERR Add sancov plugin Add Cyclomatic complexity GCC plugin GCC plugin infrastructure Shared library support
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-12/+186
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-08-02Orangefs: update orangefs.txtMike Marshall1-4/+46
Describe use of jiffy-based timeout values involved in inode maintenance. Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2016-08-02Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds37-3651/+3306
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
2016-08-02Merge tag 'armsoc-dt64' of ↵Linus Torvalds10-2/+37
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull 64-bit ARM DT updates from Olof Johansson: "Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) arm64: tegra: Enable HDMI on Jetson TX1 arm64: tegra: Add sor1_src clock arm64: tegra: Add XUSB powergates on Tegra210 arm64: tegra: Add DPAUX pinctrl bindings arm64: tegra: Add ACONNECT bus node for Tegra210 arm64: tegra: Add audio powergate node for Tegra210 arm64: tegra: Add regulators for Tegra210 Smaug arm64: tegra: Correct Tegra210 XUSB mailbox interrupt arm64: tegra: Enable XUSB controller on Jetson TX1 arm64: tegra: Enable debug serial on Jetson TX1 arm64: tegra: Add Tegra210 XUSB controller arm64: tegra: Add Tegra210 XUSB pad controller arm64: tegra: Add DSI panel on Jetson TX1 arm64: tegra: p2597: Add SDMMC power supplies arm64: tegra: Add PMIC support on Jetson TX1 Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock" arm64: dts: hi6220: Add pl031 RTC support arm64: dts: r8a7796/salvator-x: Enable watchdog timer arm64: dts: r8a7796: Add RWDT node arm64: dts: r8a7796: Use SYSC "always-on" PM Domain ...
2016-08-02Merge tag 'armsoc-dt' of ↵Linus Torvalds21-47/+369
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
2016-08-02Merge tag 'armsoc-drivers' of ↵Linus Torvalds18-21/+374
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-08-02Merge tag 'armsoc-soc' of ↵Linus Torvalds3-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas13-439/+136
Conflicts: drivers/nvme/host/pci.c
2016-08-01Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', ↵Bjorn Helgaas1-0/+56
'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next * pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c
2016-08-01Merge branches 'pci/demodularize-hosts' and 'pci/host-request-windows' into nextBjorn Helgaas1-0/+46
* pci/demodularize-hosts: PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller PCI: generic: Select IRQ_DOMAIN * pci/host-request-windows: PCI: versatile: Simplify host bridge window iteration PCI: versatile: Request host bridge window resources with core function PCI: tegra: Request host bridge window resources with core function PCI: tegra: Remove top-level resource from hierarchy PCI: rcar: Simplify host bridge window iteration PCI: rcar: Request host bridge window resources with core function PCI: rcar Gen2: Request host bridge window resources PCI: rcar: Drop gen2 dummy I/O port region ARM: Make PCI I/O space optional PCI: mvebu: Request host bridge window resources with core function PCI: generic: Simplify host bridge window iteration PCI: generic: Request host bridge window resources with core function PCI: altera: Simplify host bridge window iteration PCI: altera: Request host bridge window resources with core function PCI: xilinx-nwl: Use dev_printk() when possible PCI: xilinx-nwl: Request host bridge window resources PCI: xilinx-nwl: Free bridge resource list on failure PCI: xilinx: Request host bridge window resources PCI: xilinx: Free bridge resource list on failure PCI: xgene: Request host bridge window resources PCI: xgene: Free bridge resource list on failure PCI: iproc: Request host bridge window resources PCI: designware: Simplify host bridge window iteration PCI: designware: Request host bridge window resources PCI: designware: Free bridge resource list on failure PCI: Add devm_request_pci_bus_resources()
2016-08-01Merge branch 'pci/resource' into nextBjorn Helgaas1-0/+2
* pci/resource: unicore32/PCI: Remove pci=firmware command line parameter handling ARM/PCI: Remove arch-specific pcibios_enable_device() ARM64/PCI: Remove arch-specific pcibios_enable_device() MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups PCI: Add generic pci_bus_claim_resources() alx: Use pci_(request|release)_mem_regions ethernet/intel: Use pci_(request|release)_mem_regions GenWQE: Use pci_(request|release)_mem_regions lpfc: Use pci_(request|release)_mem_regions NVMe: Use pci_(request|release)_mem_regions PCI: Add helpers to request/release memory and I/O regions PCI: Extending pci=resource_alignment to specify device/vendor IDs sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() PCI: Unify pci_resource_to_user() declarations microblaze/PCI: Remove useless __pci_mmap_set_pgprot() powerpc/pci: Remove __pci_mmap_set_pgprot() PCI: Ignore write combining when mapping I/O port space
2016-08-01Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas1-0/+7
'pci/pm' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-08-01Merge tag 'backlight-for-linus-4.8' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Add support for an enable regulator to lp855x_bl" * tag 'backlight-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lp855x: Add enable regulator