summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2019-09-25memcg, kmem: deprecate kmem.limit_in_bytesMichal Hocko1-1/+3
Cgroup v1 memcg controller has exposed a dedicated kmem limit to users which turned out to be really a bad idea because there are paths which cannot shrink the kernel memory usage enough to get below the limit (e.g. because the accounted memory is not reclaimable). There are cases when the failure is even not allowed (e.g. __GFP_NOFAIL). This means that the kmem limit is in excess to the hard limit without any way to shrink and thus completely useless. OOM killer cannot be invoked to handle the situation because that would lead to a premature oom killing. As a result many places might see ENOMEM returning from kmalloc and result in unexpected errors. E.g. a global OOM killer when there is a lot of free memory because ENOMEM is translated into VM_FAULT_OOM in #PF path and therefore pagefault_out_of_memory would result in OOM killer. Please note that the kernel memory is still accounted to the overall limit along with the user memory so removing the kmem specific limit should still allow to contain kernel memory consumption. Unlike the kmem one, though, it invokes memory reclaim and targeted memcg oom killing if necessary. Start the deprecation process by crying to the kernel log. Let's see whether there are relevant usecases and simply return to EINVAL in the second stage if nobody complains in few releases. [akpm@linux-foundation.org: tweak documentation text] Link: http://lkml.kernel.org/r/20190911151612.GI4023@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Thomas Lindroth <thomas.lindroth@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25mm, page_owner, debug_pagealloc: save and dump freeing stack traceVlastimil Babka1-0/+2
The debug_pagealloc functionality is useful to catch buggy page allocator users that cause e.g. use after free or double free. When page inconsistency is detected, debugging is often simpler by knowing the call stack of process that last allocated and freed the page. When page_owner is also enabled, we record the allocation stack trace, but not freeing. This patch therefore adds recording of freeing process stack trace to page owner info, if both page_owner and debug_pagealloc are configured and enabled. With only page_owner enabled, this info is not useful for the memory leak debugging use case. dump_page() is adjusted to print the info. An example result of calling __free_pages() twice may look like this (note the page last free stack trace): BUG: Bad page state in process bash pfn:13d8f8 page:ffffc31984f63e00 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1affff800000000() raw: 01affff800000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount page_owner tracks the page as freed page last allocated via order 0, migratetype Unmovable, gfp_mask 0xcc0(GFP_KERNEL) prep_new_page+0x143/0x150 get_page_from_freelist+0x289/0x380 __alloc_pages_nodemask+0x13c/0x2d0 khugepaged+0x6e/0xc10 kthread+0xf9/0x130 ret_from_fork+0x3a/0x50 page last free stack trace: free_pcp_prepare+0x134/0x1e0 free_unref_page+0x18/0x90 khugepaged+0x7b/0xc10 kthread+0xf9/0x130 ret_from_fork+0x3a/0x50 Modules linked in: CPU: 3 PID: 271 Comm: bash Not tainted 5.3.0-rc4-2.g07a1a73-default+ #57 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x85/0xc0 bad_page.cold+0xba/0xbf rmqueue_pcplist.isra.0+0x6c5/0x6d0 rmqueue+0x2d/0x810 get_page_from_freelist+0x191/0x380 __alloc_pages_nodemask+0x13c/0x2d0 __get_free_pages+0xd/0x30 __pud_alloc+0x2c/0x110 copy_page_range+0x4f9/0x630 dup_mmap+0x362/0x480 dup_mm+0x68/0x110 copy_process+0x19e1/0x1b40 _do_fork+0x73/0x310 __x64_sys_clone+0x75/0x80 do_syscall_64+0x6e/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f10af854a10 ... Link: http://lkml.kernel.org/r/20190820131828.22684-5-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25mm, slab: extend slab/shrink to shrink all memcg cachesWaiman Long1-4/+9
Currently, a value of '1" is written to /sys/kernel/slab/<slab>/shrink file to shrink the slab by flushing out all the per-cpu slabs and free slabs in partial lists. This can be useful to squeeze out a bit more memory under extreme condition as well as making the active object counts in /proc/slabinfo more accurate. This usually applies only to the root caches, as the SLUB_MEMCG_SYSFS_ON option is usually not enabled and "slub_memcg_sysfs=1" not set. Even if memcg sysfs is turned on, it is too cumbersome and impractical to manage all those per-memcg sysfs files in a real production system. So there is no practical way to shrink memcg caches. Fix this by enabling a proper write to the shrink sysfs file of the root cache to scan all the available memcg caches and shrink them as well. For a non-root memcg cache (when SLUB_MEMCG_SYSFS_ON or slub_memcg_sysfs is on), only that cache will be shrunk when written. On a 2-socket 64-core 256-thread arm64 system with 64k page after a parallel kernel build, the the amount of memory occupied by slabs before shrinking slabs were: # grep task_struct /proc/slabinfo task_struct 53137 53192 4288 61 4 : tunables 0 0 0 : slabdata 872 872 0 # grep "^S[lRU]" /proc/meminfo Slab: 3936832 kB SReclaimable: 399104 kB SUnreclaim: 3537728 kB After shrinking slabs (by echoing "1" to all shrink files): # grep "^S[lRU]" /proc/meminfo Slab: 1356288 kB SReclaimable: 263296 kB SUnreclaim: 1092992 kB # grep task_struct /proc/slabinfo task_struct 2764 6832 4288 61 4 : tunables 0 0 0 : slabdata 112 112 0 Link: http://lkml.kernel.org/r/20190723151445.7385-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-22Merge tag 'rtc-5.4' of ↵Linus Torvalds7-5/+77
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Two new drivers and the new pcf2127 feature make the bulk of the additions. The rest are the usual fixes and new features. Subsystem: - add debug message when registration fails New drivers: - Amlogic Virtual Wake - Freescale FlexTimer Module alarm Drivers: - remove superfluous error messages - convert to i2c_new_dummy_device and devm_i2c_new_dummy_device - Remove dev_err() usage after platform_get_irq() - Set RTC range for: pcf2123, pcf8563, snvs. - pcf2127: tamper detection and watchdog support - pcf85363: fix regmap issue - sun6i: H6 support - remove w90x900/nuc900 driver" * tag 'rtc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits) rtc: meson: mark PM functions as __maybe_unused rtc: sc27xx: Remove clearing SPRD_RTC_POWEROFF_ALM_FLAG flag dt-bindings: rtc: ds1307: add rx8130 compatible rtc: sun6i: Allow using as wakeup source from suspend rtc: pcf8563: let the core handle range offsetting rtc: pcf8563: remove useless indirection rtc: pcf8563: convert to devm_rtc_allocate_device rtc: pcf8563: add Microcrystal RV8564 compatible rtc: pcf8563: add Epson RTC8564 compatible rtc: s35390a: convert to devm_i2c_new_dummy_device() rtc: max77686: convert to devm_i2c_new_dummy_device() rtc: pcf85363/pcf85263: fix regmap error in set_time rtc: snvs: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: snvs: set range rtc: snvs: fix possible race condition rtc: pcf2127: bugfix: watchdog build dependency rtc: pcf2127: add tamper detection support rtc: pcf2127: add watchdog feature support rtc: pcf2127: bugfix: read rtc disables watchdog rtc: pcf2127: cleanup register and bit defines ...
2019-09-22Merge tag 'rproc-v5.4' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This exposes the remoteproc's name in sysfs, allows stm32 to enter platform standby and provides bug fixes for stm32 and Qualcomm's modem remoteproc drivers. Finally it updates MAINTAINERS to reflect the move to kernel.org" * tag 'rproc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: MAINTAINERS: remoteproc: update git tree location remoteproc: Remove dev_err() usage after platform_get_irq() remoteproc: stm32: manage the get_irq probe defer case remoteproc: stm32: clear MCU PDDS at firmware start remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handling remoteproc: Add a sysfs interface for name remoteproc: qcom: Move glink_ssr notification after stop
2019-09-22Merge tag 'soundwire-5.4-rc1' of ↵Linus Torvalds1-0/+82
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This includes DT support thanks to Srini and more work done by Intel (Pierre) on improving cadence and intel support. Summary: - Add DT bindings and DT support in core - Add debugfs support for soundwire properties - Improvements on streaming handling to core - Improved handling of Cadence module - More updates and improvements to Intel driver" * tag 'soundwire-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (30 commits) soundwire: stream: make stream name a const pointer soundwire: Add compute_params callback soundwire: core: add device tree support for slave devices dt-bindings: soundwire: add slave bindings soundwire: bus: set initial value to port_status soundwire: intel: handle disabled links soundwire: intel: add debugfs register dump soundwire: cadence_master: add debugfs register dump soundwire: add debugfs support soundwire: intel: remove unused variables soundwire: intel: move shutdown() callback and don't export symbol soundwire: cadence_master: add kernel parameter to override interrupt mask soundwire: intel_init: add kernel module parameter to filter out links soundwire: cadence_master: fix divider setting in clock register soundwire: cadence_master: make use of mclk_freq property soundwire: intel: read mclk_freq property from firmware soundwire: add new mclk_freq field for properties soundwire: stream: remove unnecessary variable initializations soundwire: stream: fix disable sequence soundwire: include mod_devicetable.h to avoid compiling warnings ...
2019-09-22Merge tag 'modules-for-v5.4' of ↵Linus Torvalds3-2/+177
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "The main bulk of this pull request introduces a new exported symbol namespaces feature. The number of exported symbols is increasingly growing with each release (we're at about 31k exports as of 5.3-rc7) and we currently have no way of visualizing how these symbols are "clustered" or making sense of this huge export surface. Namespacing exported symbols allows kernel developers to more explicitly partition and categorize exported symbols, as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. For starters, we have introduced the USB_STORAGE namespace to demonstrate the API's usage. I have briefly summarized the feature and its main motivations in the tag below. Summary: - Introduce exported symbol namespaces. This new feature allows subsystem maintainers to partition and categorize their exported symbols into explicit namespaces. Module authors are now required to import the namespaces they need. Some of the main motivations of this feature include: allowing kernel developers to better manage the export surface, allow subsystem maintainers to explicitly state that usage of some exported symbols should only be limited to certain users (think: inter-module or inter-driver symbols, debugging symbols, etc), as well as more easily limiting the availability of namespaced symbols to other parts of the kernel. With the module import requirement, it is also easier to spot the misuse of exported symbols during patch review. Two new macros are introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in Documentation/kbuild/namespaces.rst. - Some small code and kbuild cleanups here and there" * tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Remove leftover '#undef' from export header module: remove unneeded casts in cmp_name() module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES module: remove redundant 'depends on MODULES' module: Fix link failure due to invalid relocation on namespace offset usb-storage: export symbols in USB_STORAGE namespace usb-storage: remove single-use define for debugging docs: Add documentation for Symbol Namespaces scripts: Coccinelle script for namespace dependencies. modpost: add support for generating namespace dependencies export: allow definition default namespaces in Makefiles or sources module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS modpost: add support for symbol namespaces module: add support for symbol namespaces. export: explicitly align struct kernel_symbol module: support reading multiple values per modinfo tag
2019-09-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+4
Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds6-44/+215
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-22Merge tag 'f2fs-for-5.4' of ↵Linus Torvalds2-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we introduced casefolding support in f2fs, and fixed various bugs in individual features such as IO alignment, checkpoint=disable, quota, and swapfile. Enhancement: - support casefolding w/ enhancement in ext4 - support fiemap for directory - support FS_IO_GET|SET_FSLABEL Bug fix: - fix IO stuck during checkpoint=disable - avoid infinite GC loop - fix panic/overflow related to IO alignment feature - fix livelock in swap file - fix discard command leak - disallow dio for atomic_write" * tag 'f2fs-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits) f2fs: add a condition to detect overflow in f2fs_ioc_gc_range() f2fs: fix to add missing F2FS_IO_ALIGNED() condition f2fs: fix to fallback to buffered IO in IO aligned mode f2fs: fix to handle error path correctly in f2fs_map_blocks f2fs: fix extent corrupotion during directIO in LFS mode f2fs: check all the data segments against all node ones f2fs: Add a small clarification to CONFIG_FS_F2FS_FS_SECURITY f2fs: fix inode rwsem regression f2fs: fix to avoid accessing uninitialized field of inode page in is_alive() f2fs: avoid infinite GC loop due to stale atomic files f2fs: Fix indefinite loop in f2fs_gc() f2fs: convert inline_data in prior to i_size_write f2fs: fix error path of f2fs_convert_inline_page() f2fs: add missing documents of reserve_root/resuid/resgid f2fs: fix flushing node pages when checkpoint is disabled f2fs: enhance f2fs_is_checkpoint_ready()'s readability f2fs: clean up __bio_alloc()'s parameter f2fs: fix wrong error injection path in inc_valid_block_count() f2fs: fix to writeout dirty inode during node flush f2fs: optimize case-insensitive lookups ...
2019-09-21Merge tag 'ext4_for_linus' of ↵Linus Torvalds7-28/+53
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Added new ext4 debugging ioctls to allow userspace to get information about the state of the extent status cache. Dropped workaround for pre-1970 dates which were encoded incorrectly in pre-4.4 kernels. Since both the kernel correctly generates, and e2fsck detects and fixes this issue for the past four years, it'e time to drop the workaround. (Also, it's not like files with dates in the distant past were all that common in the first place.) A lot of miscellaneous bug fixes and cleanups, including some ext4 Documentation fixes. Also included are two minor bug fixes in fs/unicode" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) unicode: make array 'token' static const, makes object smaller unicode: Move static keyword to the front of declarations ext4: add missing bigalloc documentation. ext4: fix kernel oops caused by spurious casefold flag ext4: fix integer overflow when calculating commit interval ext4: use percpu_counters for extent_status cache hits/misses ext4: fix potential use after free after remounting with noblock_validity jbd2: add missing tracepoint for reserved handle ext4: fix punch hole for inline_data file systems ext4: rework reserved cluster accounting when invalidating pages ext4: documentation fixes ext4: treat buffers with write errors as containing valid data ext4: fix warning inside ext4_convert_unwritten_extents_endio ext4: set error return correctly when ext4_htree_store_dirent fails ext4: drop legacy pre-1970 encoding workaround ext4: add new ioctl EXT4_IOC_GET_ES_CACHE ext4: add a new ioctl EXT4_IOC_GETSTATE ext4: add a new ioctl EXT4_IOC_CLEAR_ES_CACHE jbd2: flush_descriptor(): Do not decrease buffer head's ref count ext4: remove unnecessary error check ...
2019-09-21Merge tag 'mtd/for-5.4' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - add debugfs nodes for querying the flash name and id - mtd parser reorganization SPI NOR core changes: - always use bounce buffer for register read/writes - move m25p80 code in spi-nor.c - rework hwcaps selection for the spi-mem case - rework the core in order to move the manufacturer specific code out of it: - regroup flash parameters in 'struct spi_nor_flash_parameter' - add default_init() and post_sfdp() hooks to tweak the flash parameters - introduce the ->set_4byte(), ->convert_addr() and ->setup() methods, to deal with manufacturer specific code - rework the SPI NOR lock/unlock logic - fix an error code in spi_nor_read_raw() - fix a memory leak bug - enable the debugfs for the partname and partid - add support for few flashes SPI NOR controller drivers changes: - intel-spi: - Whitelist 4B read commands - Add support for Intel Tiger Lake SPI serial flash - aspeed-smc: Add of_node_put() - hisi-sfc: add of_node_put() - cadence-quadspi: Fix QSPI RCU Schedule Stall NAND core: - Fixing typos - Adding missing of_node_put() in various drivers Raw NAND controller drivers: - Macronix: new controller driver - Omap2: fix the number of bitflips returned - Brcmnand: fix a pointer not iterating over all the page chunks - W90x900: driver removed - Onenand: fix a memory leak - Sharpsl: missing include guard - STM32: avoid warnings when building with W=1 - Ingenic: fix a coccinelle warning - r852: call a helper to simplify the code CFI core: - Kill useless initializer in mtd_do_chip_probe() - Fix a rare write failure seen on some cfi_cmdset_0002 compliant Parallel NORs - Bunch of cleanups for cfi_cmdset_0002 driver's write functions by Tokunori Ikegami" * tag 'mtd/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (77 commits) mtd: pmc551: Remove set but not used variable 'soff_lo' mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing mode mtd: sm_ftl: Fix memory leak in sm_init_zone() error path mtd: parsers: Move CMDLINE parser mtd: parsers: Move OF parser mtd: parsers: Move BCM63xx parser mtd: parsers: Move BCM47xx parser mtd: parsers: Move TI AR7 parser mtd: pismo: Simplify getting the adapter of a client mtd: phram: Module parameters add writable permissions mtd: pxa2xx: Use ioremap_cache insted of ioremap_cached mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)" mtd: spi-nor: Add support for mt35xu02g mtd: rawnand: omap2: Fix number of bitflips reporting with ELM mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfips mtd: spi-nor: remove superfluous pass of nor->info->sector_size mtd: spi-nor: enable the debugfs for the partname and partid mtd: mtdcore: add debugfs nodes for querying the flash name and id mtd: spi-nor: hisi-sfc: Add of_node_put() before break mtd: spi-nor: aspeed-smc: Add of_node_put() ...
2019-09-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+2
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi, lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The only core change this time around is the addition of request batching for virtio. Since batching requires an additional flag to use, it should be invisible to the rest of the drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits) scsi: hisi_sas: Fix the conflict between device gone and host reset scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Remove some unused function arguments scsi: hisi_sas: Remove redundant work declaration scsi: hisi_sas: Remove hisi_sas_hw.slot_complete scsi: hisi_sas: Assign NCQ tag for all NCQ commands scsi: hisi_sas: Update all the registers after suspend and resume scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: virtio_scsi: unplug LUNs when events missed scsi: scsi_dh_rdac: zero cdb in send_mode_select() scsi: fcoe: fix null-ptr-deref Read in fc_release_transport scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code scsi: ufs: Use kmemdup in ufshcd_read_string_desc() ...
2019-09-21Merge tag 'for-5.4/dm-changes' of ↵Linus Torvalds2-0/+340
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - crypto and DM crypt advances that allow the crypto API to reclaim implementation details that do not belong in DM crypt. The wrapper template for ESSIV generation that was factored out will also be used by fscrypt in the future. - Add root hash pkcs#7 signature verification to the DM verity target. - Add a new "clone" DM target that allows for efficient remote replication of a device. - Enhance DM bufio's cache to be tailored to each client based on use. Clients that make heavy use of the cache get more of it, and those that use less have reduced cache usage. - Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the version number of a DM target (even if the associated module isn't yet loaded). - Fix invalid memory access in DM zoned target. - Fix the max_discard_sectors limit advertised by the DM raid target; it was mistakenly storing the limit in bytes rather than sectors. - Small optimizations and cleanups in DM writecache target. - Various fixes and cleanups in DM core, DM raid1 and space map portion of DM persistent data library. * tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: introduce DM_GET_TARGET_VERSION dm bufio: introduce a global cache replacement dm bufio: remove old-style buffer cleanup dm bufio: introduce a global queue dm bufio: refactor adjust_total_allocated dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer dm: add clone target dm raid: fix updating of max_discard_sectors limit dm writecache: skip writecache_wait for pmem mode dm stats: use struct_size() helper dm crypt: omit parsing of the encapsulated cipher dm crypt: switch to ESSIV crypto API template crypto: essiv - create wrapper template for ESSIV generation dm space map common: remove check for impossible sm_find_free() return value dm raid1: use struct_size() with kzalloc() dm writecache: optimize performance by sorting the blocks for writeback_all dm writecache: add unlikely for getting two block with same LBA dm writecache: remove unused member pointer in writeback_struct dm zoned: fix invalid memory access dm verity: add root hash pkcs#7 signature verification ...
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-4/+4
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-09-21Merge tag 'for-linus-hmm' of ↵Linus Torvalds1-62/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is more cleanup and consolidation of the hmm APIs and the very strongly related mmu_notifier interfaces. Many places across the tree using these interfaces are touched in the process. Beyond that a cleanup to the page walker API and a few memremap related changes round out the series: - General improvement of hmm_range_fault() and related APIs, more documentation, bug fixes from testing, API simplification & consolidation, and unused API removal - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and make them internal kconfig selects - Hoist a lot of code related to mmu notifier attachment out of drivers by using a refcount get/put attachment idiom and remove the convoluted mmu_notifier_unregister_no_release() and related APIs. - General API improvement for the migrate_vma API and revision of its only user in nouveau - Annotate mmu_notifiers with lockdep and sleeping region debugging Two series unrelated to HMM or mmu_notifiers came along due to dependencies: - Allow pagemap's memremap_pages family of APIs to work without providing a struct device - Make walk_page_range() and related use a constant structure for function pointers" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits) libnvdimm: Enable unit test infrastructure compile checks mm, notifier: Catch sleeping/blocking for !blockable kernel.h: Add non_block_start/end() drm/radeon: guard against calling an unpaired radeon_mn_unregister() csky: add missing brackets in a macro for tlb.h pagewalk: use lockdep_assert_held for locking validation pagewalk: separate function pointers from iterator data mm: split out a new pagewalk.h header from mm.h mm/mmu_notifiers: annotate with might_sleep() mm/mmu_notifiers: prime lockdep mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports mm/hmm: hmm_range_fault() infinite loop mm/hmm: hmm_range_fault() NULL pointer bug mm/hmm: fix hmm_range_fault()'s handling of swapped out pages mm/mmu_notifiers: remove unregister_no_release RDMA/odp: remove ib_ucontext from ib_umem RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm' RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address ...
2019-09-21Merge tag 'printk-for-5.4' of ↵Linus Torvalds1-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Fix off-by-one error when calculating messages that might fit into kmsg buffer. It causes occasional omitting of the last message. - Add missing pointer check in %pD format modifier handling. - Some clean up * tag 'printk-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: ABI: Update dev-kmsg documentation to match current kernel behaviour printk: Replace strncmp() with str_has_prefix() lib/test_printf: Remove obvious comments from %pd and %pD tests lib/test_printf: Add test of null/invalid pointer dereference for dentry vsprintf: Prevent crash when dereferencing invalid pointers for %pD printk: Do not lose last line in kmsg buffer dump
2019-09-21Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+8
Pull ARM SoC late updates from Arnd Bergmann: "This is some material that we picked up into our tree late or that had complex inter-depondencies. The fact that there are these interdependencies tends to meant that these are often actually the most interesting new additions: - The new Aspeed AST2600 baseboard management controller is added, this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some dependencies on other device drivers. - After many years, support for the MMP2 based OLPC XO-1.75 finally makes it into the kernel. - The Armada 3720 based Turris Mox open source router platform is a late addition and it follows some preparatory work across multiple branches. - The OMAP2+ platform had some large-scale cleanup involving driver changes and DT changes, here we finish it off, dropping a lot of the now-unused platform data. - The TI K3 platform that got added for 5.3 gains a lot more support for individual bits on the SoC, this part just came late for the merge window" [ This pull request itself wasn't actually sent late at all by Arnd, but I waited on the branches that it used to be pulled first, so it ends up being merged much later than the other ARM SoC pull requests this merge window - Linus ] * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) ARM: dts: dir685: Drop spi-cpol from the display ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB ARM: exynos: Enable support for ARM architected timers ARM: samsung: Fix system restart on S3C6410 ARM: dts: mmp2: add OLPC XO 1.75 machine ARM: dts: mmp2: rename the USB PHY node ARM: dts: mmp2: specify reg-shift for the UARTs ARM: dts: mmp2: add camera interfaces ARM: dts: mmp2: fix the SPI nodes ARM: dts: mmp2: trivial whitespace fix arm64: dts: marvell: add DTS for Turris Mox dt-bindings: marvell: document Turris Mox compatible arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address arm64: dts: ti: k3-j721e-main: Add hwspinlock node arm64: dts: ti: k3-am65-main: Add hwspinlock node arm64: dts: k3-j721e: Add gpio-keys on common processor board dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E ...
2019-09-21Merge tag 'clk-for-linus' of ↵Linus Torvalds20-7/+165
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds6-80/+1275
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-09-20Merge tag 'trace-v5.4' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Addition of multiprobes to kprobe and uprobe events (allows for more than one probe attached to the same location) - Addition of adding immediates to probe parameters - Clean up of the recordmcount.c code. This brings us closer to merging recordmcount into objtool, and reuse code. - Other small clean ups * tag 'trace-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) selftests/ftrace: Update kprobe event error testcase tracing/probe: Reject exactly same probe event tracing/probe: Fix to allow user to enable events on unloaded modules selftests/ftrace: Select an existing function in kprobe_eventname test tracing/kprobe: Fix NULL pointer access in trace_porbe_unlink() tracing: Make sure variable reference alias has correct var_ref_idx tracing: Be more clever when dumping hex in __print_hex() ftrace: Simplify ftrace hash lookup code in clear_func_from_hash() tracing: Add "gfp_t" support in synthetic_events tracing: Rename tracing_reset() to tracing_reset_cpu() tracing: Document the stack trace algorithm in the comments tracing/arm64: Have max stack tracer handle the case of return address after data recordmcount: Clarify what cleanup() does recordmcount: Remove redundant cleanup() calls recordmcount: Kernel style formatting recordmcount: Kernel style function signature formatting recordmcount: Rewrite error/success handling selftests/ftrace: Add syntax error test for multiprobe selftests/ftrace: Add syntax error test for immediates selftests/ftrace: Add a testcase for kprobe multiprobe event ...
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds2-61/+34
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-20Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds63-1009/+1674
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-09-20Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and ↵Stephen Boyd2-1/+7
'clk-actions' into clk-next - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access
2019-09-20Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' ↵Stephen Boyd2-0/+60
into clk-next * clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings
2019-09-20Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' ↵Stephen Boyd2-0/+113
into clk-next - Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-20Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and ↵Stephen Boyd17-6/+99
'clk-meson' into clk-next - Support qcom SM8150 RPMh clks - Set floor ops for qcom sd clks - Support qcom QCS404 WCSS clks - Support for Mediatek MT6779 SoCs - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) * clk-qcom: clk: qcom: rcg: Return failure for RCG update clk: qcom: fix QCS404 TuringCC regmap clk: qcom: clk-rpmh: Add support for SM8150 dt-bindings: clock: Document SM8150 rpmh-clock compatible clk: qcom: clk-rpmh: Convert to parent data scheme dt-bindings: clock: Document the parent clocks clk: qcom: gcc: Use floor ops for SDCC clocks clk: qcom: gcc-qcs404: Use floor ops for sdcc clks clk: qcom: gcc-sdm845: Use floor ops for sdcc clks clk: qcom: define probe by index API as common API clk: qcom: Add WCSS gcc clock control for QCS404 clk: qcom: msm8916: Don't build by default clk: qcom: gcc: Add global clock controller driver for SM8150 dt-bindings: clock: Document gcc bindings for SM8150 clk: qcom: clk-alpha-pll: Add support for Trion PLLs clk: qcom: clk-alpha-pll: Remove post_div_table checks clk: qcom: clk-alpha-pll: Remove unnecessary cast * clk-mtk: clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider clk: mediatek: Register clock gate with device clk: mediatek: add pericfg clocks for MT8183 dt-bindings: clock: mediatek: add pericfg for MT8183 clk: mediatek: Add MT6779 clock support clk: mediatek: Add dt-bindings for MT6779 clocks dt-bindings: mediatek: bindings for MT6779 clk clk: reset: Modify reset-controller driver * clk-armada: clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: mvebu: ap806: Fix clock name for the cluster clk: mvebu: add CPU clock driver for Armada 7K/8K clk: mvebu: add helper file for Armada AP and CP clocks dt-bindings: ap806: add the cluster clock node in the syscon file * clk-ingenic: clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro clk: ingenic/jz4740: Fix "pll half" divider not read/written properly * clk-meson: (23 commits) clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock clk: meson: g12a: add support for SM1 GP1 PLL dt-bindings: clk: meson: add sm1 periph clock controller bindings clk: meson: axg-audio: add g12a reset support dt-bindings: clock: meson: add resets to the audio clock controller clk: meson: g12a: expose CPUB clock ID for G12B clk: meson: g12a: add notifiers to handle cpu clock change clk: meson: add g12a cpu dynamic divider driver clk: core: introduce clk_hw_set_parent() clk: meson: remove clk input helper clk: meson: remove ee input bypass clocks clk: meson: clk-regmap: migrate to new parent description method clk: meson: meson8b: migrate to the new parent description method clk: meson: axg: migrate to the new parent description method clk: meson: gxbb: migrate to the new parent description method clk: meson: g12a: migrate to the new parent description method clk: meson: remove ao input bypass clocks clk: meson: axg-aoclk: migrate to the new parent description method clk: meson: gxbb-aoclk: migrate to the new parent description method ...
2019-09-20Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds12-71/+367
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-20Merge branch 'for-linus' of ↵Linus Torvalds2-14/+42
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - input core allows hardware drivers to specify a [more precise] timestamp (normally taken in top half) to better track velocity of contacts - input_dev instances now support "polling" mode so that drivers could use the same object for polled and interrupt-driven operation. The plan is to convert existing drivers and retire input_polled_dev API - a new driver for the FlySky FS-iA6B RC receiver - a refresh of BU21013 touchpad driver - w90x900 keyboard and touchpad drivers are removed as the platform is gone - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: sidewinder - make array seq static const, makes object smaller Input: reset device timestamp on sync Input: bu21013_ts - switch to using standard touchscreen properties Input: bu21013_ts - switch to using MT-B (slotted) protocol Input: bu21013_ts - fix suspend when wake source Input: bu21013_ts - use interrupt from I2C client Input: bu21013_ts - remove support for platform data Input: bu21013_ts - convert to using managed resources Input: bu21013_ts - remove useless comments Input: bu21013_ts - annotate supend/resume methods as __maybe_unused Input: bu21013_ts - rename some variables Input: bu21013_ts - convert to use GPIO descriptors ARM: ux500: improve BU21013 touchpad bindings Input: i8042 - enable wakeup on a stable struct device Input: soc_button_array - use platform_device_register_resndata() Input: psmouse - drop all unneeded functions from mouse headers Input: add support for polling to input devices Input: wacom_w8001 - allocate additional space for 'phys' Input: cros_ec_keyb - add back missing mask for event_type Input: remove dev_err() usage after platform_get_irq() ...
2019-09-20Merge tag 'mailbox-v5.4' of ↵Linus Torvalds2-8/+18
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - qcom: - enable support for ipq8074, sm1850 and sm7180 - add child device node for qcs404 - misc fixes - mediatek: - enable support for mt8183 - misc rejig of cmdq driver - new client-reg dt property - armada: - use device-managed registration api * tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom-apcs: fix max_register value mailbox: qcom: Add support for IPQ8074 APCS dt-bindings: mailbox: qom: Add ipq8074 APPS compatible mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCs dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCs mbox: qcom: replace integer with valid macro mbox: qcom: add APCS child device for QCS404 mailbox: mediatek: cmdq: clear the event in cmdq initial flow mailbox: mediatek: cmdq: support mt8183 gce function mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data dt-binding: gce: add binding for gce client reg property dt-binding: gce: add gce header file for mt8183 dt-binding: gce: remove thread-num property mailbox: armada-37xx-rwtm: Use device-managed registration API
2019-09-19Merge tag 'devicetree-for-5.4' of ↵Linus Torvalds53-876/+1455
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ...
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-12/+9
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-19Merge tag '5.4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-0/+97
Pull cifs updates from Steve French: "Various cifs/smb3 fixes (including for share deleted cases) and features including improved encrypted read performance, and various debugging improvements. Note that since I am at a test event this week with the Samba team, and at the annual Storage Developer Conference/SMB3 Plugfest test event next week a higher than usual number of fixes is expected later next week as other features in progress get additional testing and review during these two events" * tag '5.4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (38 commits) cifs: update internal module version number cifs: modefromsid: write mode ACE first cifs: cifsroot: add more err checking smb3: add missing worker function for SMB3 change notify cifs: Add support for root file systems cifs: modefromsid: make room for 4 ACE smb3: fix potential null dereference in decrypt offload smb3: fix unmount hang in open_shroot smb3: allow disabling requesting leases smb3: improve handling of share deleted (and share recreated) smb3: display max smb3 requests in flight at any one time smb3: only offload decryption of read responses if multiple requests cifs: add a helper to find an existing readable handle to a file smb3: enable offload of decryption of large reads via mount option smb3: allow parallelizing decryption of reads cifs: add a debug macro that prints \\server\share for errors smb3: fix signing verification of large reads smb3: allow skipping signature verification for perf sensitive configurations smb3: add dynamic tracepoints for flush and close smb3: log warning if CSC policy conflicts with cache mount option ...
2019-09-19Merge tag 'ovl-fixes-5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Fix a regression in docker introduced by overlayfs changes in 4.19. Also fix a couple of miscellaneous bugs" * tag 'ovl-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: filter of trusted xattr results in audit ovl: Fix dereferencing possible ERR_PTR() ovl: fix regression caused by overlapping layers detection
2019-09-19Merge tag 'fsverity-for-linus' of ↵Linus Torvalds7-2/+776
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fs-verity support from Eric Biggers: "fs-verity is a filesystem feature that provides Merkle tree based hashing (similar to dm-verity) for individual readonly files, mainly for the purpose of efficient authenticity verification. This pull request includes: (a) The fs/verity/ support layer and documentation. (b) fs-verity support for ext4 and f2fs. Compared to the original fs-verity patchset from last year, the UAPI to enable fs-verity on a file has been greatly simplified. Lots of other things were cleaned up too. fs-verity is planned to be used by two different projects on Android; most of the userspace code is in place already. Another userspace tool ("fsverity-utils"), and xfstests, are also available. e2fsprogs and f2fs-tools already have fs-verity support. Other people have shown interest in using fs-verity too. I've tested this on ext4 and f2fs with xfstests, both the existing tests and the new fs-verity tests. This has also been in linux-next since July 30 with no reported issues except a couple minor ones I found myself and folded in fixes for. Ted and I will be co-maintaining fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add fs-verity support ext4: update on-disk format documentation for fs-verity ext4: add fs-verity read support ext4: add basic fs-verity support fs-verity: support builtin file signatures fs-verity: add SHA-512 support fs-verity: implement FS_IOC_MEASURE_VERITY ioctl fs-verity: implement FS_IOC_ENABLE_VERITY ioctl fs-verity: add data verification hooks for ->readpages() fs-verity: add the hook for file ->setattr() fs-verity: add the hook for file ->open() fs-verity: add inode and superblock fields fs-verity: add Kconfig and the helper functions for hashing fs: uapi: define verity bit for FS_IOC_GETFLAGS fs-verity: add UAPI header fs-verity: add MAINTAINERS file entry fs-verity: add a documentation file
2019-09-19Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds1-130/+628
Pull fscrypt updates from Eric Biggers: "This is a large update to fs/crypto/ which includes: - Add ioctls that add/remove encryption keys to/from a filesystem-level keyring. These fix user-reported issues where e.g. an encrypted home directory can break NetworkManager, sshd, Docker, etc. because they don't get access to the needed keyring. These ioctls also provide a way to lock encrypted directories that doesn't use the vm.drop_caches sysctl, so is faster, more reliable, and doesn't always need root. - Add a new encryption policy version ("v2") which switches to a more standard, secure, and flexible key derivation function, and starts verifying that the correct key was supplied before using it. The key derivation improvement is needed for its own sake as well as for ongoing feature work for which the current way is too inflexible. Work is in progress to update both Android and the 'fscrypt' userspace tool to use both these features. (Working patches are available and just need to be reviewed+merged.) Chrome OS will likely use them too. This has also been tested on ext4, f2fs, and ubifs with xfstests -- both the existing encryption tests, and the new tests for this. This has also been in linux-next since Aug 16 with no reported issues. I'm also using an fscrypt v2-encrypted home directory on my personal desktop" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (27 commits) ext4 crypto: fix to check feature status before get policy fscrypt: document the new ioctls and policy version ubifs: wire up new fscrypt ioctls f2fs: wire up new fscrypt ioctls ext4: wire up new fscrypt ioctls fscrypt: require that key be added when setting a v2 encryption policy fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl fscrypt: allow unprivileged users to add/remove keys for v2 policies fscrypt: v2 encryption policy support fscrypt: add an HKDF-SHA512 implementation fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl fscrypt: rename keyinfo.c to keysetup.c fscrypt: move v1 policy key setup to keysetup_v1.c fscrypt: refactor key setup code in preparation for v2 policies fscrypt: rename fscrypt_master_key to fscrypt_direct_key fscrypt: add ->ci_inode to fscrypt_info fscrypt: use FSCRYPT_* definitions, not FS_* fscrypt: use FSCRYPT_ prefix for uapi constants ...
2019-09-18Merge tag 'filelock-v5.4-1' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking updates from Jeff Layton: "Just a couple of minor bugfixes, a revision to a tracepoint to account for some earlier changes to the internals, and a patch to add a pr_warn message when someone tries to mount a filesystem with '-o mand' on a kernel that has that support disabled" * tag 'filelock-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: fix a memory leak bug in __break_lease() locks: print a warning when mount fails due to lack of "mand" support locks: Fix procfs output for file leases locks: revise generic_add_lease tracepoint
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds36-127/+1772
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-18Merge branch 'linus' of ↵Linus Torvalds4-7/+58
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds22-33/+602
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-18Merge tag 'staging-5.4-rc1' of ↵Linus Torvalds18-187/+925
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging/iio driver update for 5.4-rc1. Lots of churn here, with a few driver/filesystems moving out of staging finally: - erofs moved out of staging - greybus core code moved out of staging Along with that, a new filesytem has been added: - extfat to provide support for those devices requiring that filesystem (i.e. transfer devices to/from windows systems or printers) Other than that, there a number of new IIO drivers, and lots and lots and lots of staging driver cleanups and minor fixes as people continue to dig into those for easy changes. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits) Staging: gasket: Use temporaries to reduce line length. Staging: octeon: Avoid several usecases of strcpy staging: vhciq_core: replace snprintf with scnprintf staging: wilc1000: avoid twice IRQ handler execution for each single interrupt staging: wilc1000: remove unused interrupt status handling code staging: fbtft: make several arrays static const, makes object smaller staging: rtl8188eu: make two arrays static const, makes object smaller staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST" dt-bindings: anybus-controller: move to staging/ tree staging: emxx_udc: remove local TRUE/FALSE definition staging: wilc1000: look for rtc_clk clock staging: dt-bindings: wilc1000: add optional rtc_clk property staging: nvec: make use of devm_platform_ioremap_resource staging: exfat: drop unused function parameter Staging: exfat: Avoid use of strcpy staging: exfat: use integer constants staging: exfat: cleanup spacing for casts staging: exfat: cleanup spacing for operators staging: rtl8723bs: hal: remove redundant variable n staging: pi433: Fix typo in documentation ...
2019-09-18Merge tag 'tty-5.4-rc1' of ↵Linus Torvalds7-45/+141
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-18Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds13-624/+123
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
2019-09-18Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-11/+26
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-18dt-bindings: ap806: Document AP807 clock compatibleMiquel Raynal1-3/+5
Add AP807 clock compatible to the bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-3-miquel.raynal@bootlin.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18dt-bindings: ap80x: Document AP807 CPU clock compatibleMiquel Raynal1-3/+6
Add AP807 CPU clock compatible to the bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-2-miquel.raynal@bootlin.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-18Merge tag 'acpi-5.4-rc1' of ↵Linus Torvalds2-4/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include an ACPICA update (to upstream revision 20190816), improvements of support for memory hot-add in the HMAT handling code and some assorted fixes and cleanups. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190816 including: * Internal limits change to support larger systems (Bob Moore). * Macros clean up (Bob Moore). * printf format string fixes (Bob Moore). * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore). * Tools improvements (Bob Moore, Colin Ian King). * Windows _OSI support fixes (Jung-uk Kim). - Improve memory hot-add support in the ACPI HMAT handling code (Dan Williams, Keith Busch). - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to save and restore private registers during system-wide suspend and resume on systems with the Lynxpoint PCH (Jarkko Nikula). - Convert the ACPI documentation related to LEDs to ReST (Sakari Ailus). - Fix assorted issues and make assorted minor improvements in the ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang, YueHaibing)" * tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) ACPI / PCI: fix acpi_pci_irq_enable() memory leak ACPI: custom_method: fix memory leaks ACPI: thermal: Remove redundant acpi_has_method() calls ACPI / CPPC: do not require the _PSD method ACPI: SBS: remove unused const variable 'SMBUS_PEC' ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint ACPI/PCI: Remove surplus parentheses from a return statement ACPICA: Update version to 20190816. ACPICA: Add "Windows 2019" string to _OSI support. ACPICA: Differentiate Windows 8.1 from Windows 8. ACPICA: Fully deploy ACPI_PRINTF_LIKE macro ACPICA: iASL,acpi_dump: Improve y/n query ACPICA: Fix issues with arg types within printf format strings ACPICA: Macros: remove pointer math on a null pointer ACPICA: Increase total number of possible Owner IDs ACPICA: Debugger: remove redundant assignment on obj_desc Documentation: ACPI: DSD: Convert LED documentation to ReST ACPI / APEI: Release resources if gen_pool_add() fails HMAT: Skip publishing target info for nodes with no online memory HMAT: Register attributes for memory hot add ...
2019-09-18Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds11-24/+585
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-18Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds11-239/+336
Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...