summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/st
AgeCommit message (Collapse)AuthorFilesLines
2024-03-04Merge tag 'stm32-dt-for-v6.9-1' of ↵Arnd Bergmann13-11/+126
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.9, round 1 Highlights: ---------- - MCU: - Add DSI support on stm32f769. - Add display support on stm32f769-disco. - Add stm32f769-disco-mb1166-reva09 board support which belongs to the novatek NT35510 panel. - MPU: - STM32MP13: - Add CRC support an enable it on stm32mp135f-dk. - Enable CRYP on stm32mp135f-dk. - STMP32MP15: - Fix DSI peripheral clock: use bus clock instead of kernel clock for pclk. - LXA: driver powerboard lines as open drain. - LXA: reduce RGMII drive strenght to reduce EMI emmissions. - STM32MP25: - Add video encoder / video decoder support. * tag 'stm32-dt-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 dt-bindings: mfd: stm32f7: Add binding definition for DSI dt-bindings: nt35510: document 'port' property ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strength ARM: dts: stm32: fix DSI peripheral clock on stm32mp15 boards ARM: dts: stm32: lxa-tac: drive powerboard lines as open-drain Link: https://lore.kernel.org/r/a7ae1058-e24d-4a6b-900f-401f0e3ae17c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'dt-cleanup-6.9' of ↵Arnd Bergmann1-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.9 1. Marvell MMP2: Very old issue, for which I sent patch back in 2014. Patch was never picked up and now another try to fix the same happened, so here it goes: use proper compatible MAX8925. 2. Marvell Dove: add proper unit-addresses. 3. TI DA850: add MMC interrupts. 4. STI: minor white-space fixes. * tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: sti: minor whitespace cleanup around '=' ARM: dts: da850: add MMD SDIO interrupts ARM: dts: marvell: dove-cubox: fix si5351 node names arm: dts: marvell: Fix maxium->maxim typo in brownstone dts Link: https://lore.kernel.org/r/20240218182656.32103-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dkThomas Bourgoin1-0/+4
Add the crypto accelerator enable on stm32mp135f-dk board. Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: stm32: enable CRC on stm32mp135f-dkLionel Debieve1-0/+4
Enable Cyclic redundancy check on stm32mp135f-dk. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: stm32: add CRC on stm32mp131Lionel Debieve1-0/+7
The Cyclic redundancy check calculation unit (CRC) peripheral offers a CRC-based operation (CRC32/CRC32C) used to verify data transmission or storage integrity. This peripheral is integrated in stm32mp131 and can be default enabled. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: add stm32f769-disco-mb1166-reva09Dario Binacchi2-0/+14
As reported in the section 8.3 (i. e. Board revision history) of document UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes related to the board revision addressed by the patch: - Board MB1166 revision A-09: - LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK The patch adds the DTS support for the new display which belongs to the the Novatek NT35510-based panel family. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: stm32: add display support on stm32f769-discoDario Binacchi1-1/+63
The patch adds display support on the stm32f769-disco board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-discoDario Binacchi1-3/+3
In the schematics of document UM2033, the power supply for the micro SD card is the same 3v3 voltage that is used to power other devices on the board. By generalizing the name of the voltage regulator, it can be referenced by other nodes in the device tree without creating misunderstandings. This patch is preparatory for future developments. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29ARM: dts: stm32: add DSI support on stm32f769Dario Binacchi1-0/+20
Add support for MIPI DSI Host controller. Since MIPI DSI is not available on stm32f746, the patch adds the "stm32f769.dtsi" file containing the dsi node inside. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-20arm: dts: Fix dtc interrupt_provider warningsRob Herring2-2/+0
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-14ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strengthLeonard Göhrs1-0/+4
This results in an improvement of EMI performance by reducing the 125MHz emission and its harmonics caused by the RGMII clock line. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-01-26ARM: dts: sti: minor whitespace cleanup around '='Krzysztof Kozlowski1-4/+4
The DTS code coding style expects exactly one space before and after '=' sign. Link: https://lore.kernel.org/r/20231127093438.20512-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-01-25ARM: dts: stm32: fix DSI peripheral clock on stm32mp15 boardsRaphael Gallais-Pou5-5/+5
In RCC driver, 'DSI_K' is a kernel clock while 'DSI' has pclk4 as parent clock, which means that it is an APB peripheral clock. Swap the clocks in the DSI peripheral clock reference. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-01-24ARM: dts: stm32: lxa-tac: drive powerboard lines as open-drainLeonard Göhrs2-2/+2
This results in a slight improvement in EMI performance due to the lines no longer being driven by the somewhat noisy VDD_IO supply of the SoM. Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-21Merge tag 'ux500-dts-soc-for-v6.8' of ↵Arnd Bergmann9-56/+543
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt More Ux500 device tree updates for v6.8 The HREF520 reference design had the wrong analog baseband defined causing a boot regression. Was AB8500, but this board has AB8505. Rearrange the device trees to make it possible to define a different AB and slot it in. * tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: ux500-href: Switch HREF520 to AB8505 ARM: dts: ux500-href: Push AB8500 config out ARM: dts: ux500-href: Push AB8500 inclusion to the top Link: https://lore.kernel.org/r/CACRpkdZ9wCV7oohF2KX6MFwmuSPR_i7et8O5SH=op6gyQ4mOvQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-21Merge tag 'stm32-dt-for-v6.8-1' of ↵Arnd Bergmann22-51/+88
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.8, round 1 Highlights: ---------- - MCU: - Add SPI support on STM32F746. - Better describe vcc_3v3 for SD and DSI on stm32f469-disco. - MPU: - STM32MP13: - Add DCMIPP (Digital Camera Memory Interface Piwel Processor) on STM32MP135. - STMP32MP15: - Change "phys" affectation from board to Soc dtsi file for USB host as it is hard linked to the port 0 of usbphyc. - Fix SCMI and No-SCMI compatible in boards. - STM32MP25: - Add BSEC support to read the device part number OTP and the package data register OTP. * tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add dcmipp support to stm32mp135 arm64: dts: st: add bsec support to stm32mp25 ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15 ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles ARM: dts: stm32: minor whitespace cleanup around '=' ARM: dts: stm32: add SPI support on STM32F746 ARM: dts: stm32: add STM32F746 syscfg clock ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-21ARM: dts: ste: minor whitespace cleanup around '='Krzysztof Kozlowski10-21/+21
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231212-ux500-dts-v1-1-5a31b6742d85@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-15ARM: dts: ux500-href: Switch HREF520 to AB8505Linus Walleij2-1/+491
After noticing a tendency to misbehave and randomly power down: switch the HREF520 AB8500 to the AB8505, which is what it has mounted. After this the board works better. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-3-9dcff0783d62@linaro.org
2023-12-15ARM: dts: ux500-href: Push AB8500 config outLinus Walleij2-55/+48
Push out some AB8500 setup of regulators and phy out to the per-AB850x variant file ste-href-ab8500.dtsi so it becomes self-contained for each AB850x chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-2-9dcff0783d62@linaro.org
2023-12-15ARM: dts: ux500-href: Push AB8500 inclusion to the topLinus Walleij6-1/+5
On the hardware reference designs, include the AB8500 definitions on the top level in the DTS files, this is to make it possible to use the AB8505 in the HREF520. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-1-9dcff0783d62@linaro.org
2023-12-15ARM: dts: stm32: add dcmipp support to stm32mp135Hugues Fruchet1-0/+11
Add dcmipp support to STM32MP135. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15Uwe Kleine-König15-31/+4
All machines making use of &usbh_ehci and/or &usbh_ohci use phys = <&usbphyc_port0>; So move this setting into the .dtsi. Also add phy-names = "usb"; which isn't used by all machines, but nice for consistency. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: don't mix SCMI and non-SCMI board compatiblesAhmad Fatoum4-5/+4
The binding erroneously decreed that the SCMI variants of the ST evaluation kits are compatible with the non-SCMI variants. This is not correct, as a kernel or bootloader compatible with the non-SCMI variant is not necessarily able to function, when direct access to resources is replaced by having to talk SCMI to the secure monitor. The binding has been adjusted to reflect thus, so synchronize the device trees now. Fixes: 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: minor whitespace cleanup around '='Krzysztof Kozlowski4-4/+4
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-11-21ARM: dts: stm32: add SPI support on STM32F746Ben Wolsieffer1-0/+60
Add device tree nodes for the STM32F746 SPI controllers. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-11-21ARM: dts: stm32: add STM32F746 syscfg clockBen Wolsieffer1-0/+1
The syscfg syscon was missing its clock, therefore any attempt to read/write it after clk_disable_unused() silently failed. This was preventing external pin interrupts from working if they were initialized after this point. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-11-20ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-discoDario Binacchi1-11/+4
In the board schematic, the power supply for the SD card is the same 3.3 volts used to power the LCD panel and other peripherals. By generalizing the name of the voltage regulator, it simplifies the device tree and makes it more readable. Link: https://www.st.com/en/evaluation-tools/32f469idiscovery.html#cad-resources Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-10-18arm/arm64: dts: Removed undocumented and unused "pl022,hierarchy" propertyRob Herring2-4/+0
The "pl022,hierarchy" is not documented, all instances use are 0 and isn't handled in the kernel driver, so let's just remove it. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230928190859.1072420-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'stm32-dt-for-v6.7-1' of ↵Arnd Bergmann10-14/+615
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.7, round 1 Highlights: ---------- - MCU: - Add SDIO sleep pins for F7 boards. - MPU: - STM32MP13: - Add HASH and RNG support. - STMP32MP15: - OCTAVO: - Fix regulators (LDO1/2/6 and 3v3_hdmi) by removing "always-on" property on OSD32 common file. - Add new OS32MP1-RED board. It embeds a STM32157C SoC, 512 MB of DDR3, CAN-FD, HDMI, USB-C OTG. - STM32MP25: - Add and enable SDCARD support. - Add and enable ARM watchdog support and set it to 32 seconds. * tag 'stm32-dt-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boards ARM: dts: stm32: add stm32f7 SDIO sleep pins ARM: dts: stm32: add RNG node for STM32MP13x platforms ARM: dts: stm32: omit unused pinctrl groups from stm32mp15 dtb files ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank lines ARM: dts: stm32: add HASH on stm32mp131 arm64: dts: st: enable secure arm-wdt watchdog on stm32mp257f-ev1 arm64: dts: st: add arm-wdt node for watchdog support on stm32mp251 arm64: dts: st: add SD-card support on STM32MP257F-EV1 board arm64: dts: st: add sdmmc1 pins for stm32mp25 arm64: dts: st: add sdmmc1 node in stm32mp251 SoC file ARM: dts: stm32: Add Octavo OSD32MP1-RED board dt-bindings: arm: stm32: add extra SiP compatible for oct,stm32mp157c-osd32-red ARM: dts: stm32: osd32: fix ldo6 not required to be always-on ARM: dts: stm32: lxa-tac: remove v3v3_hdmi override ARM: dts: stm32: osd32: fix ldo2 not required to be always-on ARM: dts: stm32: osd32: fix ldo1 not required to be always-on ARM: dts: stm32: Add alternate pinmux for can pins ARM: dts: stm32: Add alternate pinmux for ldtc pins ARM: dts: stm32: Add alternate pinmux for i2s pins Link: https://lore.kernel.org/r/8a6b3ca9-f10d-825e-e371-8aeff3289a25@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-13Merge tag 'sti-dt-for-v6.7-round1' of ↵Arnd Bergmann2-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt STi DT for v6.7, round 1 : stih418-b2264: leds and serial fixes stih407: drop max-duty-cycle property stih415/416: remove boards from yaml stih407/410/418: add boards to yaml * tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: dt-bindings: arm: sti: add STi boards and remove stih415/stih416 dt-bindings: soc: sti: add STi platform syscon ARM: dts: st: correct led level in stih418-b2264.dts ARM: dts: st: move leds out of soc in stih418-b2264.dts ARM: dts: st: correct serial alias in stih418-b2264.dts ARM: dts: st: stih407: drop max-duty-cycle Link: https://lore.kernel.org/r/e6b975f2-9936-465a-8253-6fcead974006@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-13ARM: dts: st: correct led level in stih418-b2264.dtsAlain Volmat1-1/+1
The state of the green led on the stih418-b2264 is currently inverted. Correct this by fixing the GPIO active state. Signed-off-by: Alain Volmat <avolmat@me.com> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-13ARM: dts: st: move leds out of soc in stih418-b2264.dtsAlain Volmat1-7/+7
Move the leds node out of the soc section and correct the following warning: Warning (simple_bus_reg): /soc/leds: missing or empty reg/ranges property Signed-off-by: Alain Volmat <avolmat@me.com> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-13ARM: dts: st: correct serial alias in stih418-b2264.dtsAlain Volmat1-1/+1
Aliases should only contain lowercase, digits or - hence correct the alias for the serial from ttyAS0 into serial0 as already done for the other boards. Signed-off-by: Alain Volmat <avolmat@me.com> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-13ARM: dts: st: stih407: drop max-duty-cycleKrzysztof Kozlowski1-1/+0
"max-duty-cycle" property was removed in the commit f747a1fe7848 ("regulator: pwm-regulator: Remove obsoleted property"): stih418-b2199.dtb: pwm-regulator: Unevaluated properties are not allowed ('max-duty-cycle' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-09ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boardsBen Wolsieffer3-3/+6
Use the new analog mode SDIO pin definitions on the STM32F7 boards. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-10-09ARM: dts: stm32: add stm32f7 SDIO sleep pinsBen Wolsieffer1-0/+22
Add SDIO sleep pin definitions that place the pins in analog mode to save power. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-10-09ARM: dts: stm32: add RNG node for STM32MP13x platformsGatien Chevallier1-0/+8
The RNG on STM32MP13 offers upgrades like customization of its configuration and the conditional reset. The hardware RNG should be managed in the secure world for but it is supported on Linux. Therefore, is it not default enabled. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: stm32: omit unused pinctrl groups from stm32mp15 dtb filesSascha Hauer1-0/+228
stm32mp15-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank linesDario Binacchi1-1/+0
The patch fixes the following warning: arch/arm/dts/stm32f7-pinctrl.dtsi:380: check: Please don't use multiple blank lines Fixes: ba287d1a0137 ("ARM: dts: stm32: add pin map for LTDC on stm32f7") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-29ARM: dts: stm32: add HASH on stm32mp131Lionel Debieve1-0/+11
Add the HASH support on stm32mp131. Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-25ARM: dts: st: href-tvk1281618: correct touchscreen syna,nosleep-modeKrzysztof Kozlowski1-1/+1
There is no syna,nosleep property in Synaptics RMI4 touchscreen: ste-hrefprev60-tvk.dtb: synaptics@4b: rmi4-f01@1: 'syna,nosleep' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-2-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-25ARM: dts: st: href-tvk1281618: fix touchscreen VIO supplyKrzysztof Kozlowski1-1/+1
According to bindings and Linux driver, there is no VDDIO but VIO supply: ste-hrefprev60-tvk.dtb: synaptics@4b: Unevaluated properties are not allowed ('vddio-supply' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230720115524.137944-1-krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-09-11ARM: dts: stm32: Add Octavo OSD32MP1-RED boardSean Nyekjaer2-0/+226
Add support for the Octavo OSD32MP1-RED development board. General features: - STM32MP157C - 512MB DDR3 - CAN-FD - HDMI - USB-C OTG - UART Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: osd32: fix ldo6 not required to be always-onSean Nyekjaer1-2/+0
According to the OSD32MP1 Power System overview[1] there is no hard requirement for the ldo6 to be always-on. [1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: lxa-tac: remove v3v3_hdmi overrideSean Nyekjaer1-4/+0
Patch "ARM: dts: stm32: osd32: fix ldo2 not required to be always-on" is making this property delete obsolete. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: osd32: fix ldo2 not required to be always-onSean Nyekjaer1-2/+0
According to the OSD32MP1 Power System overview[1] there is no hard requirement for the ldo2 to be always-on. [1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: osd32: fix ldo1 not required to be always-onSean Nyekjaer1-2/+0
According to the OSD32MP1 Power System overview[1] there is no hard requirement for the ldo1 to be always-on. [1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Leonard Göhrs <l.goehrs@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: Add alternate pinmux for can pinsSean Nyekjaer1-0/+20
Add another mux option for can pins, this is used on Octavo OSD32MP1-RED board. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: Add alternate pinmux for ldtc pinsSean Nyekjaer1-0/+75
Add another mux option for ltdc pins, this is used on Octavo OSD32MP1-RED board. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-09-11ARM: dts: stm32: Add alternate pinmux for i2s pinsSean Nyekjaer1-0/+19
Add another mux option for i2s pins, this is used on Octavo OSD32MP1-RED board. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-10 14:14:35 +0300