summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2023-12-15ARM: dts: ux500-href: Push AB8500 config outLinus Walleij2-55/+48
Push out some AB8500 setup of regulators and phy out to the per-AB850x variant file ste-href-ab8500.dtsi so it becomes self-contained for each AB850x chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-2-9dcff0783d62@linaro.org
2023-12-15ARM: dts: ux500-href: Push AB8500 inclusion to the topLinus Walleij6-1/+5
On the hardware reference designs, include the AB8500 definitions on the top level in the DTS files, this is to make it possible to use the AB8505 in the HREF520. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231214-ux500-no-turnoff-lowbatt-v1-1-9dcff0783d62@linaro.org
2023-12-15ARM: dts: marvell: make dts use gpio-fan matrix instead of arrayDavid Heidelberg14-112/+121
No functional changes. Adjust to comply with dt-schema requirements and make possible to validate values. Acked-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-12-15ARM: dts: marvell: Fix some common switch mistakesLinus Walleij8-108/+96
Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - The ports node should be named ethernet-ports - The ethernet-ports node should have port@0 etc children, no plural "ports" in the children. - Ports should be named ethernet-port@0 etc - PHYs should be named ethernet-phy@0 etc This serves as an example of fixes needed for introducing a schema for the bindings, but the patch can simply be applied. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-12-15ARM: dts: stm32: add dcmipp support to stm32mp135Hugues Fruchet1-0/+11
Add dcmipp support to STM32MP135. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15Uwe Kleine-König15-31/+4
All machines making use of &usbh_ehci and/or &usbh_ohci use phys = <&usbphyc_port0>; So move this setting into the .dtsi. Also add phy-names = "usb"; which isn't used by all machines, but nice for consistency. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: don't mix SCMI and non-SCMI board compatiblesAhmad Fatoum4-5/+4
The binding erroneously decreed that the SCMI variants of the ST evaluation kits are compatible with the non-SCMI variants. This is not correct, as a kernel or bootloader compatible with the non-SCMI variant is not necessarily able to function, when direct access to resources is replaced by having to talk SCMI to the secure monitor. The binding has been adjusted to reflect thus, so synchronize the device trees now. Fixes: 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: stm32: minor whitespace cleanup around '='Krzysztof Kozlowski4-4/+4
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-12-14ARM: dts: imx23/28: Fix the DMA controller node nameFabio Estevam2-2/+2
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'. Change it to fix the following dt-schema warning. imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx23-sansa: Use preferred i2c-gpios propertiesFabio Estevam1-8/+4
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx27-apf27dev: Fix LED nameFabio Estevam1-1/+1
Per leds-gpio.yaml, the led names should start with 'led'. Change it to fix the following dt-schema warning: imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25/27: Pass timing0Fabio Estevam8-8/+8
Per display-timings.yaml, the 'timing' pattern should be used to describe the display timings. Change it accordingly to fix the following dt-schema warning: imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25: Fix the iim compatible stringFabio Estevam1-1/+1
Per imx-iim.yaml, the compatible string should only contain a single entry. Use it as "fsl,imx25-iim" to fix the following dt-schema warning: imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25: Move usbphy nodes out of simple-busFabio Estevam1-18/+10
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx1-apf9328.dtb: aipi@200000: $nodename:0: 'aipi@200000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-busFabio Estevam2-22/+13
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-pdk: Move usbphy0 out of simple-busFabio Estevam1-12/+6
The USB PHY should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for EMI busFabio Estevam1-1/+1
Per simple-bus.yaml, 'emi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx25-pdk.dtb: emi@80000000: $nodename:0: 'emi@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx27-pdk.dtb: aipi@10020000: $nodename:0: 'aipi@10020000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-som: Use the mux- prefixFabio Estevam1-2/+2
According to Documentation/devicetree/bindings/sound/imx-audmux.yaml, there must be a "mux-" prefix in the audmux port nodes. Add the "mux-" prefix to avoid the following dt-schema warning: imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Fix sram nodeFabio Estevam1-1/+4
Per sram.yaml, address-cells, size-cells and ranges are mandatory. The node name should be sram. Change the node name and pass the required properties to fix the following dt-schema warnings: imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?' from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Fix sram nodeFabio Estevam1-0/+3
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following dt-schema warnings: Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx: Use flash@0,0 patternFabio Estevam4-4/+4
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern. Change it to 'flash@0,0' to fix the following dt-schema warning: imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25/27-eukrea: Fix RTC node nameFabio Estevam2-2/+2
Node names should be generic. Use 'rtc' as node name to fix the following dt-schema warning: imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25-pdk: Pass #sound-dai-cellsFabio Estevam1-0/+1
Per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: sgtl5000@a: '#sound-dai-cells' is a required property from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25: Pass I2C clock-names propertyFabio Estevam1-3/+3
Per i2c-imx.yaml, 'clock-names' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: i2c@43f80000: clock-names:0: 'ipg' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: Fix occasional boot hang for am3 usbTony Lindgren1-0/+1
With subtle timings changes, we can now sometimes get an external abort on non-linefetch error booting am3 devices at sysc_reset(). This is because of a missing reset delay needed for the usb target module. Looks like we never enabled the delay earlier for am3, although a similar issue was seen earlier with a similar usb setup for dm814x as described in commit ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x"). Cc: stable@vger.kernel.org Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc") Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-12-12ARM: dts: rockchip: add hdmi-connector node to rk3036-kylinJohan Jonker1-0/+17
Add hdmi-connector node to comply with the inno_hdmi binding. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/f5bc182b-f9b6-26a8-8649-19ce33e3c0e1@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12ARM: dts: rockchip: fix rk3036 hdmi ports nodeJohan Jonker1-3/+11
Fix hdmi ports node so that it matches the rockchip,inno-hdmi.yaml binding. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/9a2afac1-ed5c-382d-02b0-b2f5f1af3abb@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from ↵Mihai Sain1-1/+0
sdmmc0 node On board the sdmmc0 interface is wired to a SD Card socket. According with mmc-controller bindings, the mmc-ddr-3_3v property is used for eMMC devices to enable high-speed DDR mode (3.3V I/O). Remove the mmc-ddr-3_3v property from sdmmc0 node. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20231211070345.2792-1-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-12-11Merge 6.7-rc5 into usb-nextGreg Kroah-Hartman7-13/+14
We need the USB fixes in here as well to build off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-09ARM: dts: qcom: msm8226: Add GPULuca Weiss1-0/+40
The msm8226 SoC contains an Adreno 305B. Add a node to configure it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20231130-msm8226-gpu-v1-3-6bb2f1b29e49@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-09ARM: dts: qcom: Disable pm8941 & pm8226 smbb charger by defaultBryant Mairs11-0/+26
Some platforms don't use the built-in charging hardware (e.g. milletwifi). As this is an optional peripheral, default it to off. Keep it enabled for all other boards that use smbb. Signed-off-by: Bryant Mairs <bryant@mai.rs> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231203-smbb-pm8941-pm8226-v1-1-9ad75909604b@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-08ARM: dts: samsung: exynos4210-i9100: Add accelerometer nodePaul Cercueil1-0/+17
Add a Device Tree node for the ST Microelectronics "K3D" accelerometer chip found in the Galaxy S2. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20231206221556.15348-4-paul@crapouillou.net [krzysztof: fix alphabetical placement of i2c_1] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-12-08ARM: dts: samsung: exynos4210-i9100: Add node for touch keysPaul Cercueil1-1/+22
Add a Device Tree node to support the LED-backed "menu" and "back" keys. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20231206221556.15348-3-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-12-08ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12Paul Cercueil1-0/+8
The kernel hangs for a good 12 seconds without any info being printed to dmesg, very early in the boot process, if this regulator is not enabled. Force-enable it to work around this issue, until we know more about the underlying problem. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20231206221556.15348-2-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-12-08ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from ↵Mihai Sain1-1/+0
sdmmc0 node On board the sdmmc0 interface is wired to a SD Card socket. According with mmc-controller bindings, the mmc-ddr-3_3v property is used for eMMC devices to enable high-speed DDR mode (3.3V I/O). Remove the mmc-ddr-3_3v property from sdmmc0 node. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20231204072537.2991-1-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-12-08Merge tag 'v6.7-rockchip-dtsfixes1' of ↵Arnd Bergmann2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Devicetree fixes for the 6.7-cycle. All over the place this time. From adapting the size of the vdec nodes on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name mishaps, down to some dt-cleanups. Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc grf binding, that I somehow messed up during the pull requests for the -rc1 . At least with it included the dt-checker is happier. * tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588 arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128 arm64: dts: rockchip: minor whitespace cleanup around '=' ARM: dts: rockchip: minor whitespace cleanup around '=' dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf arm64: dts: rockchip: fix rk356x pcie msg interrupt name arm64: dts: rockchip: Expand reg size of vdec node for RK3399 arm64: dts: rockchip: Expand reg size of vdec node for RK3328 Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-07ARM: dts: rockchip: add gpio alias for gpio dt nodesJohan Jonker5-0/+25
Rockchip SoC TRM, SoC datasheet and board schematics always refer to the same gpio numbers - even if not all are used for a specific board. In order to not have to re-define them for every board add the aliases to SoC dtsi files. Co-developed-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/89f2a229-9f14-d43f-c53d-5d4688e70456@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-07ARM: dts: qcom: minor whitespace cleanup around '='Krzysztof Kozlowski1-2/+2
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231124095049.58618-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07ARM: dts: qcom: sdx55: fix USB wakeup interrupt typesJohan Hovold1-2/+2
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support") Cc: stable@vger.kernel.org # 5.12 Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07Merge tag 'imx-fixes-6.7' of ↵Arnd Bergmann4-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.7: - A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX entry. - A series from Alexander Stein to fix #pwm-cells for imx8-ss. - A series from Haibo Chen to fix GPIO node name for i.MX93 and i.MX8ULP. - Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix an issue that the controller may hang when processing transactions under heavy USB traffic from multiple endpoints. - Fix mediamix block power on/off for i.MX93 by correcting the power domain clock to be 'nic_media'. - A couple of Ethernet PHY clock regression fixes for imx6ul-pico and imx6q-skov board. - Fix edma3 power domain for i.MX8QM to fix a panic during startup process. * tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-xea: Pass the 'model' property ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry arm64: dts: imx8-apalis: set wifi regulator to always-on ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init arm64: dts: imx8ulp: update gpio node name to align with register address arm64: dts: imx93: update gpio node name to align with register address arm64: dts: imx93: correct mediamix power arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3 ARM: dts: imx6q: skov: fix ethernet clock regression arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-06ARM: dts: imx23/28: Remove undocumented "fsl,clkctrl"Fabio Estevam2-2/+2
Per imx23-clock.yaml and imx28-clock.yaml, fsl,clkctrl is not a valid compatible string. Remove it to fix the following dt-schema warning: imx28-evk.dtb: clkctrl@80040000: compatible: ['fsl,imx28-clkctrl', 'fsl,clkctrl'] is too long from schema $id: http://devicetree.org/schemas/clock/imx28-clock.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx28-xea: Pass the 'model' propertyFabio Estevam1-0/+1
Per root-node.yaml, 'model' is a required property. Pass it to fix the following dt-schema warning: imx28-xea.dtb: /: 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gptPhilipp Zabel1-4/+4
The timer nodes declare compatibility with "fsl,imx6sx-gpt", which itself is compatible with "fsl,imx6dl-gpt". Switch the fallback compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt". Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: bcm2711: Add BCM2711 xHCI supportStefan Wahren2-0/+19
The BCM2711 SoC also has a mostly generic xHCI. The USB port is currently only usable on the Compute Module 4 (e.g. via IO board). Because DWC2 and xHCI share the same PHY, we let the bootloader enable it on demand. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231205200531.8232-4-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-06ARM: dts: imx28-lwe: Pass device_type to the memory nodeFabio Estevam1-0/+1
Per memory.yaml, 'device_type' is a required property. Pass it to fix the following dt-schema warning: imx28-xea.dtb: /: memory@40000000: 'device_type' is a required property from schema $id: http://devicetree.org/schemas/memory.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx23/28: Remove unneeded "fsl,mxs-gpio"Fabio Estevam2-8/+8
According to gpio-mxs.yaml, only "fsl,imx23-gpio" or "fsl,imx28-gpio" are valid compatible strings. This fixes the following dt-schema warnings: imx23-evk.dtb: pinctrl@80018000: gpio@0:compatible: ['fsl,imx23-gpio', 'fsl,mxs-gpio'] is too long from schema $id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx28-tx28: Pass #sound-dai-cellsFabio Estevam1-0/+1
Per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following dt-schema warning: imx28-tx28.dtb: sgtl5000@a: '#sound-dai-cells' is a required property from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06ARM: dts: imx7s: Add on-chip memoryPhilipp Zabel1-0/+9
Add the 128 KiB on-chip SRAM at address 0x900000. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 17:41:34 +0300