summaryrefslogtreecommitdiff
path: root/arch/arm/mach-aspeed
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28ARM: aspeed: Kconfig: Fix indentationJuerg Haefliger1-7/+7
The convention for indentation seems to be a single tab. Help text is further indented by an additional two whitespaces. Fix the lines that violate these rules. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220523060532.7864-1-juergh@canonical.com Link: https://lore.kernel.org/r/20220928025926.2592030-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08ARM: rework endianess selectionArnd Bergmann1-1/+1
Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-16ARM: aspeed: Drop unneeded select of HAVE_SMPGeert Uytterhoeven1-1/+0
Support for the 6th generation Aspeed SoCs depends on ARCH_MULTI_V7. As the latter selects HAVE_SMP, there is no need for MACH_ASPEED_G6 to select HAVE_SMP. Link: https://lore.kernel.org/r/20200505150722.1575-6-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-20ARM: aspeed: ast2500 is ARMv6KArnd Bergmann1-1/+0
Linux supports both the original ARMv6 level (early ARM1136) and ARMv6K (later ARM1136, ARM1176 and ARM11mpcore). ast2500 falls into the second categoy, being based on arm1176jzf-s. This is enabled by default when using ARCH_MULTI_V6, so we should not 'select CPU_V6'. Removing this will lead to more efficient use of atomic instructions. Fixes: 8c2ed9bcfbeb ("arm: Add Aspeed machine") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Joel Stanley <joel@jms.id.au>
2019-08-25ARM: aspeed: Enable SMP bootJoel Stanley2-0/+66
This brings the secondary CPU into Linux. It depends on the setup performed by ASPEED's u-boot. Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-25ARM: aspeed: Add ASPEED AST2600 architectureJoel Stanley1-1/+13
The AST2600 is a Cortex A7 dual core CPU that uses the ARM GIC for interrupts and ARM timer as a clocksource. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-08-25ARM: aspeed: Select timer in each SoCJoel Stanley1-1/+2
In preparation for adding the ast2600 which does not use this timer. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12clocksource/drivers/fttmr010: Merge Moxa into FTTMR010Linus Walleij1-1/+1
This merges the Moxa Art timer driver into the Faraday FTTMR010 driver and replaces all Kconfig symbols to use the Faraday driver instead. We are now so similar that the drivers can be merged by just adding a few lines to the Faraday timer. Differences: - The Faraday driver explicitly sets the counter to count upwards for the clocksource, removing the need for the clocksource core to invert the value. - The Faraday driver also handles sched_clock() On the Aspeed, the counter can only count downwards, so support the timers in downward-counting mode as well, and flag the Aspeed to use this mode. This mode was tested on the Gemini so I have high hopes that it'll work fine on the Aspeed as well. After this we have one driver for all three SoCs and a generic Faraday FTTMR010 timer driver, which is nice. Cc: Joel Stanley <joel@jms.id.au> Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-01-10ARM: aspeed: Select pinctrl driversAndrew Jeffery1-0/+4
Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2016-05-09arm: Add Aspeed machineJoel Stanley1-0/+30
Aspeed devices are a common Baseboard Management Controller (BMC) system on chip containing an ARM9 or ARM11 core, off-chip DDR RAM and support for a large number of peripherals. This patch adds basic support for the ast2400 and ast2500 machines, capable of booting to a prompt in QEMU (-M palmetto-bmc), on an Palmetto OpenPower development machine, and on the ast2500 EVB. Signed-off-by: Joel Stanley <joel@jms.id.au>