summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)AuthorFilesLines
2017-02-28Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-5/+5
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ...
2017-02-28ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli2-5/+5
All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-24Merge tag 'armsoc-soc' of ↵Linus Torvalds5-61/+54
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
2017-02-07clocksource/drivers/ostm: Add renesas-ostm timer driverChris Brandt1-0/+1
This patch adds a OSTM driver for the Renesas architecture. The OS Timer (OSTM) has independent channels that can be used as a freerun or interval times. This driver uses the first probed device as a clocksource and then any additional devices as clock events. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-01-25ARM: shmobile: rcar-gen2: Add more register documentationGeert Uytterhoeven1-11/+29
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: shmobile: rcar-gen2: Remove unused rcar_gen2_read_mode_pins()Geert Uytterhoeven2-20/+0
After 1. commit 9f5ce39ddb8f68b3 ("ARM: shmobile: rcar-gen2: Obtain extal frequency from DT"), 2. commit 80951f04c3f92533 ("ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driver"), 3. and handling of debug resource reset, there are no more users of rcar_gen2_read_mode_pins() left. Remove the function and its support definitions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: shmobile: r8a7791: Allow booting secondary CPU cores in debug modeGeert Uytterhoeven1-13/+1
Now debug resource reset is handled properly, allow booting secondary CPU cores when hardware debug mode is enabled (MD21=1, SW8-4=OFF on koelsch) on legacy r8a7791. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: shmobile: apmu: Allow booting secondary CPU cores in debug modeGeert Uytterhoeven1-13/+1
Now debug resource reset is handled properly, allow booting secondary CPU cores when hardware debug mode is enabled (MD21=1) on SoCs using the "renesas,apmu" enable method. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: shmobile: apmu: Add debug resource reset for secondary CPU bootGeert Uytterhoeven1-0/+13
In debug mode (MD21=1), reset requests derived from power-shutoff to the AP-system CPU cores must be enabled before the AP-system CPU cores resume from power-shutoff for the first time. Else resume may fail, causing the system to hang during boot. As setting these bits is a no-op in normal mode, there's no need to check the actual state of MD21 first. Inspired by CPU-specific patches in the BSP by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03ARM: shmobile: apmu: Add more register documentationGeert Uytterhoeven1-4/+10
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-12-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-12-16Merge tag 'armsoc-soc' of ↵Linus Torvalds6-107/+51
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
2016-11-23soc: renesas: Identify SoC and register with the SoC busGeert Uytterhoeven1-0/+1
Identify the SoC type and revision, and register this information with the SoC bus, so it is available under /sys/devices/soc0/, and can be checked where needed using soc_device_match(). Identification is done using the Product Register or Common Chip Code Register, as declared in DT (PRR only for now), or using a hardcoded fallback if missing. Example: Detected Renesas R-Car Gen2 r8a7791 ES1.0 ... # cat /sys/devices/soc0/{machine,family,soc_id,revision} Koelsch R-Car Gen2 r8a7791 ES1.0 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-15ARM: shmobile: r8a7745: basic SoC supportSergei Shtylyov2-0/+5
Add minimal support for the RZ/G1E (R8A7745) SoC. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: shmobile: select errata 798181 for SoCs with CA15 coresSimon Horman1-0/+6
Select ARM errata 798181 on SoCs cores affected CA15 cores. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-11-02ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driverGeert Uytterhoeven1-3/+2
Now the R-Car Gen2 CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just call of_clk_init() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2016-11-02ARM: shmobile: r8a7779: Stop passing mode pins state to clock driverGeert Uytterhoeven1-27/+0
Now the R-Car H1 CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just remove the .init_time() callback, the generic ARM code will take care of calling of_clk_init() and clocksource_probe(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2016-11-02ARM: shmobile: r8a7778: Stop passing mode pins state to clock driverGeert Uytterhoeven1-15/+0
Now the R-Car M1A CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just remove the .init_time() callback, the generic ARM code will take care of calling of_clk_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2016-11-02ARM: shmobile: Consolidate R8A7743 and R8A779[234] machine definitionsLaurent Pinchart6-139/+33
The four SoCs use identical machine operations, consolidate them into two machine definitions in a single file. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-02ARM: shmobile: r8a7743: basic SoC supportSergei Shtylyov3-0/+39
Add minimal support for the RZ/G1M (R8A7743) SoC. Based on the original (and large) patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-02ARM: shmobile: only call rcar_gen2_clocks_init() if presentSimon Horman1-1/+10
The RZ/G1M (r8a7743) uses the R-Car Gen2 core, but not the R-Car Gen2 clock driver. This is a harbinger of a transition for R-Car Gen2 SoCs. As the process to get all the required pieces in place is somewhat complex it seems useful to try to disentangle dependencies where possible. The approach here is to temporarily disable calling rcar_gen2_clocks_init() if no R-Car Gen2 SoC are configured and thus the symbol will not be present. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-10-17ARM: shmobile: Sort Kconfig selectionsGeert Uytterhoeven1-3/+3
Sort alphabetically all symbols selected by ARCH_RENESAS Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-08Merge tag 'armsoc-soc' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - We get support for running in big-endian mode on two platforms: sunxi (Allwinner) and s3c24xx (old Samsung). - The recently added Uniphier platform now uses standard PSCI methods for SMP booting and we remove support for old bootloader versions that did not support it yet. - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a close relative of the Allwinner A13 and R8 chips. - PXA completes its move over to the generic dmaengine framework and removes its old private API - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC with integrated 802.11ac wireless networking" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: imx legacy: pca100: move peripheral initialization to .init_late ARM: imx legacy: mx27ads: move peripheral initialization to .init_late ARM: imx legacy: mx21ads: move peripheral initialization to .init_late ARM: imx legacy: pcm043: move peripheral initialization to .init_late ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late ARM: imx legacy: vpr200: move peripheral initialization to .init_late ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late ARM: imx legacy: qong: move peripheral initialization to .init_late ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late ARM: imx legacy: pcm037: move peripheral initialization to .init_late ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late ARM: imx legacy: mx31ads: move peripheral initialization to .init_late ARM: imx legacy: mx31lite: move peripheral initialization to .init_late ARM: imx legacy: kzm: move peripheral initialization to .init_late MAINTAINERS: update list of Oxnas maintainers ARM: orion5x: remove extraneous NO_IRQ ARM: orion: simplify orion_ge00_switch_init ...
2016-10-08Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
2016-10-04Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-18/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Thomas Gleixner: "Yet another batch of cpu hotplug core updates and conversions: - Provide core infrastructure for multi instance drivers so the drivers do not have to keep custom lists. - Convert custom lists to the new infrastructure. The block-mq custom list conversion comes through the block tree and makes the diffstat tip over to more lines removed than added. - Handle unbalanced hotplug enable/disable calls more gracefully. - Remove the obsolete CPU_STARTING/DYING notifier support. - Convert another batch of notifier users. The relayfs changes which conflicted with the conversion have been shipped to me by Andrew. The remaining lot is targeted for 4.10 so that we finally can remove the rest of the notifiers" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) cpufreq: Fix up conversion to hotplug state machine blk/mq: Reserve hotplug states for block multiqueue x86/apic/uv: Convert to hotplug state machine s390/mm/pfault: Convert to hotplug state machine mips/loongson/smp: Convert to hotplug state machine mips/octeon/smp: Convert to hotplug state machine fault-injection/cpu: Convert to hotplug state machine padata: Convert to hotplug state machine cpufreq: Convert to hotplug state machine ACPI/processor: Convert to hotplug state machine virtio scsi: Convert to hotplug state machine oprofile/timer: Convert to hotplug state machine block/softirq: Convert to hotplug state machine lib/irq_poll: Convert to hotplug state machine x86/microcode: Convert to hotplug state machine sh/SH-X3 SMP: Convert to hotplug state machine ia64/mca: Convert to hotplug state machine ARM/OMAP/wakeupgen: Convert to hotplug state machine ARM/shmobile: Convert to hotplug state machine arm64/FP/SIMD: Convert to hotplug state machine ...
2016-09-21ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORMKishon Vijay Abraham I1-1/+0
PCI_DOMAINS config should be selected for any SoCs having more than a single PCIe controller. Without PCI_DOMAINS config, only one PCIe controller gets registered. Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since it doesn't harm even if a platform has a single PCIe port. Also remove PCI_DOMAINS being selected from other platform specific configs. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-19ARM/shmobile: Convert to hotplug state machineSebastian Andrzej Siewior1-18/+8
Install the callbacks via the state machine so the old notifier based cpuhotplug infrastructure can be removed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-sh@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: rt@linutronix.de Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20160906170457.32393-3-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-15Merge tag 'renesas-soc-for-v4.9' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC Updates for v4.9" from Simon Horman: Clean-up: * Only use smp_init when SMP is selected Enablement: * Add debug-ll support for r8a7992 * tag 'renesas-soc-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: only use smp_init when SMP is selected ARM: shmobile: r8a7790: only use smp_init when SMP is selected ARM: debug-ll: Add support for r8a7992
2016-09-09Merge tag 'renesas-fixes-for-v4.8' of ↵Arnd Bergmann1-36/+26
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v4.8" from Simon Horman: * Correct R-Car Gen2 regulator quirk * tag 'renesas-fixes-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: fix regulator quirk for Gen2
2016-09-02ARM: shmobile: fix regulator quirk for Gen2Wolfram Sang1-36/+26
The current implementation only works if the da9xxx devices are added before their drivers are registered. Only then it can apply the fixes to both devices. Otherwise, the driver for the first device gets probed before the fix for the second device can be applied. This is what fails when using the IP core switcher or when having the i2c master driver as a module. So, we need to disable both da9xxx once we detected one of them. We now use i2c_transfer with hardcoded i2c_messages and device addresses, so we don't need the da9xxx client devices to be instantiated. Because the fixup is used on specific boards only, the addresses are not going to change. Fixes: 663fbb52159cca ("ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (r8a7791/koelsch) Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-24ARM: shmobile: r8a7791: only use smp_init when SMP is selectedWolfram Sang1-1/+1
We use the helper function which populates the smp_init pointer only in case of SMP. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-24ARM: shmobile: r8a7790: only use smp_init when SMP is selectedWolfram Sang1-1/+1
We use the helper function which populates the smp_init pointer only in case of SMP. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-02ARM: shmobile: don't call platform_can_secondary_boot on UPArnd Bergmann1-0/+3
For rcar-gen2, we build the SMP files even for UP configurations, and that just broke: arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_init_fallback_ops': pm-rcar-gen2.c:(.init.text+0x40c): undefined reference to `platform_can_secondary_boot' This adds an compile-time check before the call to platform_can_secondary_boot, turning the function into an empty stub for UP configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c21af444eace ("ARM: shmobile: smp: Add function to prioritize DT SMP") Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-08-02Merge tag 'armsoc-soc' of ↵Linus Torvalds12-46/+169
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
2016-08-02Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "The cleanup branch keeps going down in size as we've completed a lot of the major legacy platform removals and conversions. A handful of changes this time around, some of the themes or larger sets are: - A bunch of i.MX cleanups around platform detection, init call cleanups - Misc fixes of missing/implicit includes - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) ARM: mps2: fix typo ARM: s3c64xx: avoid warning about 'struct device_node' bus: mvebu-mbus: make mvebu_mbus_syscore_ops static bus: mvebu-mbus: fix __iomem on register pointers ARM: tegra: Remove board_init_funcs array ARM: iop: Fix indentation ARM: imx: remove cpu_is_mx*() ARM: imx: remove last call to cpu_is_mx5* ARM: imx: rework mx27_pm_init() call ARM: imx: deconstruct mx3_idle ARM: imx: deconstruct mxc_rnga initialization ARM: imx: remove cpu_is_mx1 check ARM: i.MX: Do not explicitly call l2x0_of_init() ARM: i.MX: system.c: Tweak prefetch settings for performance ARM: i.MX: system.c: Replace magic numbers ARM: i.MX: system.c: Remove redundant errata 752271 code ARM: i.MX: system.c: Convert goto to if statement ARM: Kirkwood: fix kirkwood_pm_init() declaration/type ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static ARM: orion5x: make orion5x_legacy_handle_irq static ...
2016-07-07Merge tag 'renesas-soc2-for-v4.8' of ↵Olof Johansson11-36/+164
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Second Round of Renesas ARM Based SoC Updates for v4.8 * Add DT support to the APMU driver and prioritise DT APMU support * Obtain extal frequency from DT * Add support for r8a7792 * tag 'renesas-soc2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: Prioritize DT APMU support ARM: shmobile: r8a7790: Prioritize DT APMU support ARM: shmobile: smp: Add function to prioritize DT SMP ARM: shmobile: apmu: Add APMU DT support via Enable method ARM: shmobile: apmu: Move #ifdef CONFIG_SMP to cover more functions ARM: shmobile: rcar-gen2: Correct arch timer frequency on R-Car V2H ARM: shmobile: rcar-gen2: Obtain extal frequency from DT ARM: shmobile: r8a7792: basic SoC support soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init() soc: renesas: rcar-sysc: add R8A7792 support soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions soc: renesas: rcar-sysc: Document r8a7796 support Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-06Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/socArnd Bergmann1-1/+1
* commit '5c34a4e89c743339f78cafb2f2a826a010f0746a': ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB ARM: uniphier: drop code for old DT binding These cause a harmless conflict with the clps711x multiplatform support, and it's easy to resolve. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-29ARM: shmobile: r8a7791: Prioritize DT APMU supportMagnus Damm1-0/+1
Adjust the r8a7791 SoC support code to not configure any non-DT SMP code in case the DT-based enable-method has been installed already. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: r8a7790: Prioritize DT APMU supportMagnus Damm1-0/+1
Adjust the r8a7790 SoC support code to not configure any non-DT SMP code in case the DT-based enable-method has been installed already. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: smp: Add function to prioritize DT SMPMagnus Damm2-0/+7
Add a function to check if other DT based method is available, and if so return false to not hook up smp_ops from the machine vector. This results in that DT-based SMP support has priority over older C-based smp_ops code, and in case DT-based SMP support code does not exist in the DTB then the old smp_ops code will still work as-is. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: apmu: Add APMU DT support via Enable methodMagnus Damm1-4/+88
Allow DT configuration of the APMU hardware in the case when the APMU is pointed out in the DTB via the enable-method. The ability to configure the APMU via C code is still kept intact to prevent DTB breakage for older SoCs that do not rely on the enable-method for SMP support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> [geert: Fix CONFIG_SMP=n build] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: apmu: Move #ifdef CONFIG_SMP to cover more functionsGeert Uytterhoeven1-1/+1
shmobile_smp_apmu_prepare_cpus() is used only if CONFIG_SMP=y. Hence move the #ifdef to cover shmobile_smp_apmu_prepare_cpus() and all functions only called by it (apmu_init_cpu() and apmu_parse_cfg()). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: rcar-gen2: Correct arch timer frequency on R-Car V2HGeert Uytterhoeven1-1/+2
According to the datasheet, the frequency of the ARM architecture timer on R-Car V2H depends on the frequency of the ZS clock, just like on R-Car E2. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: rcar-gen2: Obtain extal frequency from DTGeert Uytterhoeven1-20/+22
On some R-Car Gen2 SoCs, the frequency of the ARM architecture timer depends on the frequency of the external clock crystal. Currently the latter is determined indirectly from the state of the mode pins, which is a relic predating DT. Obtain the external clock crystal frequency from DT instead, removing the dependency on the mode pins. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: shmobile: r8a7792: basic SoC supportSergei Shtylyov3-0/+40
Add minimal support for the R-Car V2H (R8A7792) SoC. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29Merge branch 'rcar-sysc-for-v4.8' into HEADSimon Horman2-10/+2
2016-06-29soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driverGeert Uytterhoeven2-10/+2
On R-Car H1 and Gen2, the SYSC interrupt registers are always configured using hardcoded values in platform code. For R-Car Gen2, values are provided for H2 and M2-W only, other SoCs are not yet supported, and never will be. Move this configuration from SoC-specific platform code to the rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured from DT. This would be the case not only for H1, H2, and M2-W using a modern DTS, but also for other R-Car Gen2 SoCs not supported by the platform code, relying purely on DT. There is no longer a need to return the mapped register block, hence make the function return void. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-23arm: Remove unnecessary of_platform_populate with default match tableKefeng Wang2-5/+0
After patch "of/platform: Add common method to populate default bus", it is possible for arch code to remove unnecessary callers of of_platform_populate with default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Lee Jones <lee@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Kukjin Kim <kgene@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij1-1/+1
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-05-30ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCsGeert Uytterhoeven1-9/+4
Currently the different SoCs in the R-Car Gen2 family use different types of on-chip RAM for the jump stub: - R-Car H2 uses Media RAM, - R-Car M2-W uses another type of optional On-chip RAM, as it doesn't have Media RAM, - R-Car M2-N uses Inter Connect RAM in Magnus Damm's "ARM: shmobile: r8a7793 boot address update". As all R-Car Gen2 SoCs have 4 KiB of Inter Connect RAM, consolidate the code by always using that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>