summaryrefslogtreecommitdiff
path: root/arch/arm/mm
AgeCommit message (Collapse)AuthorFilesLines
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-1/+1
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-04ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()Chen-Yu Tsai1-1/+1
max_pfn, as set in arch/arm/mm/init.c: static void __init find_limits(unsigned long *min, unsigned long *max_low, unsigned long *max_high) { *max_low = PFN_DOWN(memblock_get_current_limit()); *min = PFN_UP(memblock_start_of_DRAM()); *max_high = PFN_DOWN(memblock_end_of_DRAM()); } with memblock_end_of_DRAM() pointing to the next byte after DRAM. As such, max_pfn points to the PFN after the end of DRAM. Thus when using max_pfn to check DMA masks, we should subtract one when checking DMA ranges against it. Commit 8bf1268f48ad ("ARM: dma-api: fix off-by-one error in __dma_supported()") fixed the same issue, but missed this spot. This issue was found while working on the sun4i-csi v4l2 driver on the Allwinner R40 SoC. On Allwinner SoCs, DRAM is offset at 0x40000000, and we are starting to use of_dma_configure() with the "dma-ranges" property in the device tree to have the DMA API handle the offset. In this particular instance, dma-ranges was set to the same range as the actual available (2 GiB) DRAM. The following error appeared when the driver attempted to allocate a buffer: sun4i-csi 1c09000.csi: Coherent DMA mask 0x7fffffff (pfn 0x40000-0xc0000) covers a smaller range of system memory than the DMA zone pfn 0x0-0xc0001 sun4i-csi 1c09000.csi: dma_alloc_coherent of size 307200 failed Fixing the off-by-one error makes things work. Link: http://lkml.kernel.org/r/20191224030239.5656-1-wens@kernel.org Fixes: 11a5aa32562e ("ARM: dma-mapping: check DMA mask against available memory") Fixes: 9f28cde0bc64 ("ARM: another fix for the DMA mapping checks") Fixes: ab746573c405 ("ARM: dma-mapping: allow larger DMA mask than supported") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-7/+7
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-25ARM: 8949/1: mm: mark free_memmap as __initOlof Johansson1-1/+1
As of commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly"), free_memmap() might not always be inlined, and thus is triggering a section warning: WARNING: vmlinux.o(.text.unlikely+0x904): Section mismatch in reference from the function free_memmap() to the function .meminit.text:memblock_free() Mark it as __init, since the faller (free_unused_memmap) already is. Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar2-2/+2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08sched/rt, ARM: Use CONFIG_PREEMPTIONThomas Gleixner2-4/+4
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code, cache over to use CONFIG_PREEMPTION and add output in show_stack() for PREEMPT_RT. [bigeasy: +traps.c] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20191015191821.11479-2-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-05Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC platform updates from Olof Johansson: "Most of these are for MMP (seeing a bunch of cleanups and refactorings for the first time in a while), and for OMAP (a bunch of cleanups and added support for voltage controller on OMAP4430)" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Add missing put_device() call in omapdss_init_of() OMAP2: fixup doc comments in omap_device ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1 ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED ARM: imx: use generic function to exit coherency ARM: tegra: Use WFE for power-gating on Tegra30 ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS ARM: s3c: Rename s5p_usb_phy functions ARM: s3c: Rename s3c64xx_spi_setname() function ARM: imx: Add serial number support for i.MX6/7 SoCs ARM: imx: Drop imx_anatop_usb_chrg_detect_disable() arm64: Introduce config for S32 ARM: hisi: drop useless depend on ARCH_MULTI_V7 arm64: realtek: Select reset controller ARM: shmobile: rcar-gen2: Drop legacy DT clock support ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize") MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support ...
2019-12-05lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addrHuang Shijie1-1/+1
Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds29-47/+60
Pull ARM updates from Russell King: - improve ARM implementation of pfn_valid() - various sparse fixes - spelling fixes - add further ARMv8 debug architecture versions - clang fix for decompressor - update to generic vDSO - remove Brahma-B53 from spectre hardening - initialise broadcast hrtimer device - use correct nm executable in decompressor - remove old mcount et.al. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (26 commits) ARM: 8940/1: ftrace: remove mcount(),ftrace_caller_old() and ftrace_call_old() ARM: 8939/1: kbuild: use correct nm executable ARM: 8938/1: kernel: initialize broadcast hrtimer based clock event device ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening ARM: 8933/1: replace Sun/Solaris style flag on section directive ARM: 8932/1: Add clock_gettime64 entry point ARM: 8931/1: Add clock_getres entry point ARM: 8930/1: Add support for generic vDSO ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand ARM: 8927/1: ARM/hw_breakpoint: add more ARMv8 debug architecture versions support ARM: 8918/2: only build return_address() if needed ARM: 8928/1: ARM_ERRATA_775420: Spelling s/date/data/ ARM: 8925/1: tcm: include <asm/tcm.h> for missing declarations ARM: 8924/1: tcm: make dtcm_end and itcm_end static ARM: 8923/1: mm: include <asm/vga.h> for vga_base ARM: 8922/1: parse_dt_topology() rate is pointer to __be32 ARM: 8920/1: share get_signal_page from signal.c to process.c ARM: 8919/1: make unexported functions static ARM: 8917/1: mm: include <asm/set_memory.h> ARM: 8916/1: mm: make set_section_perms() static ...
2019-11-28Merge branch 'master' of ↵Linus Torvalds2-11/+5
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...
2019-11-28Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremapLinus Torvalds3-9/+1
Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ...
2019-11-21Merge branch 'kvm-tsx-ctrl' into HEADPaolo Bonzini2-25/+51
Conflicts: arch/x86/kvm/vmx/vmx.c
2019-11-20dma-mapping: drop the dev argument to arch_sync_dma_for_*Christoph Hellwig1-4/+4
These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-16ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardeningDoug Berger1-0/+3
When the default processor handling was added to the function cpu_v7_spectre_init() it only excluded other ARM implemented processor cores. The Broadcom Brahma B53 core is not implemented by ARM so it ended up falling through into the set of processors that attempt to use the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor. Since this workaround is not necessary for the Brahma-B53 this commit explicitly checks for it and prevents it from applying a branch predictor hardening workaround. Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-16ARM: 8933/1: replace Sun/Solaris style flag on section directiveNick Desaulniers24-25/+25
It looks like a section directive was using "Solaris style" to declare the section flags. Replace this with the GNU style so that Clang's integrated assembler can assemble this directive. The modified instances were identified via: $ ag \.section | grep # Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119 Link: https://github.com/ClangBuiltLinux/linux/issues/744 Link: https://bugs.llvm.org/show_bug.cgi?id=43759 Link: https://reviews.llvm.org/D69296 Acked-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Fangrui Song <maskray@google.com> Suggested-by: Jian Cai <jiancai@google.com> Suggested-by: Peter Smith <peter.smith@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-16ARM: 8930/1: Add support for generic vDSOVincenzo Frascino1-0/+3
The arm vDSO library requires some adaptations to take advantage of the newly introduced generic vDSO library. Introduce the following changes: - Modification vdso.c to be compliant with the common vdso datapage - Use of lib/vdso for gettimeofday - Implementation of elf note Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-16ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operandStefan Agner2-4/+4
LLVM's integrated assembler does not accept r15 as mrc operand. arch/arm/boot/compressed/head.S:1267:16: error: operand must be a register in range [r0, r14] or apsr_nzcv 1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache ^ Use APSR_nzcv instead of r15. The GNU assembler supports this syntax since binutils 2.21 [0]. [0] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=db472d6ff0f438a21b357249a9b48e4b74498076 Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-11-11arm: remove ioremap_cachedChristoph Hellwig3-9/+1
No users of ioremap_cached are left, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2019-11-11dma-direct: provide mmap and get_sgtable method overridesChristoph Hellwig1-6/+0
For dma-direct we know that the DMA address is an encoding of the physical address that we can trivially decode. Use that fact to provide implementations that do not need the arch_dma_coherent_to_pfn architecture hook. Note that we still can only support mmap of non-coherent memory only if the architecture provides a way to set an uncached bit in the page tables. This must be true for architectures that use the generic remap helpers, but other architectures can also manually select it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
2019-10-31ARM: 8923/1: mm: include <asm/vga.h> for vga_baseBen Dooks (Codethink)1-0/+2
iomap.c needs <asm/vga.h> for the definition vga_base to avoid the following warning: arch/arm/mm/iomap.c:13:15: warning: symbol 'vga_base' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-30dma-mapping: fix handling of dma-ranges for reserved memory (again)Vladimir Murzin1-1/+1
Daniele reported that issue previously fixed in c41f9ea998f3 ("drivers: dma-coherent: Account dma_pfn_offset when used with device tree") reappear shortly after 43fc509c3efb ("dma-coherent: introduce interface for default DMA pool") where fix was accidentally dropped. Lets put fix back in place and respect dma-ranges for reserved memory. Fixes: 43fc509c3efb ("dma-coherent: introduce interface for default DMA pool") Reported-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com> Tested-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com> Tested-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-28ARM: 8917/1: mm: include <asm/set_memory.h>Ben Dooks (Codethink)1-0/+1
The definitions of set_kernel_text_rw() and set_kernel_text_ro() are in <asm/set_memory.h> but this is not included in init.c which defines these. Silence the following warnings by including the <asm/set_memory.h> header. arch/arm/mm/init.c:669:6: warning: symbol 'set_kernel_text_rw' was not declared. Should it be static? arch/arm/mm/init.c:678:6: warning: symbol 'set_kernel_text_ro' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-28ARM: 8916/1: mm: make set_section_perms() staticBen Dooks (Codethink)1-2/+2
The set_section_perms() is not defined outside of the init.c file, so make it static to avoid the following warning: arch/arm/mm/init.c:596:6: warning: symbol 'set_section_perms' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-28ARM: 8909/1: make unexported items staticBen Dooks1-15/+19
Fixup the following sparse warnings by making the functions and structures static. arch/arm/mm/dma-mapping.c:1562:6: warning: symbol '__arm_iommu_free_attrs' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1586:6: warning: symbol 'arm_iommu_free_attrs' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1592:6: warning: symbol 'arm_coherent_iommu_free_attrs' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1716:5: warning: symbol 'arm_coherent_iommu_map_sg' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1734:5: warning: symbol 'arm_iommu_map_sg' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1767:6: warning: symbol 'arm_coherent_iommu_unmap_sg' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1784:6: warning: symbol 'arm_iommu_unmap_sg' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1798:6: warning: symbol 'arm_iommu_sync_sg_for_cpu' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:1816:6: warning: symbol 'arm_iommu_sync_sg_for_device' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:2018:26: warning: symbol 'iommu_ops' was not declared. Should it be static? arch/arm/mm/dma-mapping.c:2040:26: warning: symbol 'iommu_coherent_ops' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-28ARM: 8907/1: arch: reuse addr variable in pfn_validClemens Gruber1-1/+1
Avoid calling __pfn_to_phys twice. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-25/+51
:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
2019-10-22Merge branch 'misc' into fixesRussell King5-60/+37
2019-10-21arm/arm64: Make use of the SMCCC 1.1 wrapperSteven Price1-8/+5
Rather than directly choosing which function to use based on psci_ops.conduit, use the new arm_smccc_1_1 wrapper instead. In some cases we still need to do some operations based on the conduit, but the code duplication is removed. No functional change. Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-21ARM: 8926/1: v7m: remove register save to stack before svcafzal mohammed1-1/+0
r0-r3 & r12 registers are saved & restored, before & after svc respectively. Intention was to preserve those registers across thread to handler mode switch. On v7-M, hardware saves the register context upon exception in AAPCS complaint way. Restoring r0-r3 & r12 is done from stack location where hardware saves it, not from the location on stack where these registers were saved. To clarify, on stm32f429 discovery board: 1. before svc, sp - 0x90009ff8 2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b 3. upon svc, h/w decrements sp by 32 & pushes registers onto stack 4. after svc, sp - 0x90009fd8 5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb Above means r0-r3,r12 is not restored from the location where they are saved, but since hardware pushes the registers onto stack, the registers are restored correctly. Note that during register saving to stack (step 2), it goes past 0x9000a000. And it seems, based on objdump, there are global symbols residing there, and it perhaps can cause issues on a non-XIP Kernel (on XIP, data section is setup later). Based on the analysis above, manually saving registers onto stack is at best no-op and at worst can cause data section corruption. Hence remove storing of registers onto stack before svc. Fixes: b70cd406d7fe ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode") Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-17ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMPLubomir Rintel1-1/+1
MMP3 has a PJ4B with a Tauros 3 cache controller that uses CACHE_L2X0 instead, while CACHE_TAUROS2 is present on PJ4 and PJ1 (Mohawk) based platforms only. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-10-14arm: spectre-v2: use arm_smccc_1_1_get_conduit()Mark Rutland1-7/+3
Now that we have arm_smccc_1_1_get_conduit(), we can hide the PSCI implementation details from the arm spectre-v2 code, so let's do so. As arm_smccc_1_1_get_conduit() implicitly checks that the SMCCC version is at least SMCCC_VERSION_1_1, we no longer need to check this explicitly where switch statements have a default case. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-11ARM: 8914/1: NOMMU: Fix exc_ret for XIPVladimir Murzin1-3/+2
It was reported that 72cd4064fcca "NOMMU: Toggle only bits in EXC_RETURN we are really care of" breaks NOMMU+XIP combination. It happens because saved EXC_RETURN gets overwritten when data section is relocated. The fix is to propagate EXC_RETURN via register and let relocation code to commit that value into memory. Fixes: 72cd4064fcca ("ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of") Reported-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-10ARM: mm: alignment: use "u32" for 32-bit instructionsRussell King1-14/+14
Rather than using "unsigned long", use "u32" for 32-bit instructions in the alignment fault handler. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-10ARM: mm: fix alignment handler faults under memory pressureRussell King1-8/+36
When the system has high memory pressure, the page containing the instruction may be paged out. Using probe_kernel_address() means that if the page is swapped out, the resulting page fault will not be handled because page faults are disabled by this function. Use get_user() to read the instruction instead. Reported-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Fixes: b255188f90e2 ("ARM: fix scheduling while atomic warning in alignment handling code") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-09-26mm: treewide: clarify pgtable_page_{ctor,dtor}() namingMark Rutland1-1/+1
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few people, and until recently arm64 used these erroneously/pointlessly for other levels of page table. To make it incredibly clear that these only apply to the PTE level, and to align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them to pgtable_pte_page_{ctor,dtor}(). These changes were generated with the following shell script: ---- git grep -lw 'pgtable_page_.tor' | while read FILE; do sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE; sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE; done ---- ... with the documentation re-flowed to remain under 80 columns, and whitespace fixed up in macros to keep backslashes aligned. There should be no functional change as a result of this patch. Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25arm: use generic mmap top-down layout and brk randomizationAlexandre Ghiti1-62/+0
arm uses a top-down mmap layout by default that exactly fits the generic functions, so get rid of arch specific code and use the generic version by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE, use the generic version of arch_randomize_brk since it also fits. Note that this commit also removes the possibility for arm to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Note that it is safe to remove STACK_RND_MASK since it matches the default value. Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25arm: use STACK_TOP when computing mmap base addressAlexandre Ghiti1-2/+2
mmap base address must be computed wrt stack top address, using TASK_SIZE is wrong since STACK_TOP and TASK_SIZE are not equivalent. Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25arm: properly account for stack randomization and stack guard gapAlexandre Ghiti1-2/+12
This commit takes care of stack randomization and stack guard gap when computing mmap base address and checks if the task asked for randomization. This fixes the problem uncovered and not fixed for arm here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25mm: introduce compound_nr()Matthew Wilcox (Oracle)1-2/+2
Replace 1 << compound_order(page) with compound_nr(page). Minor improvements in readability. Link: http://lkml.kernel.org/r/20190721104612.19120-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25mm: introduce page_size()Matthew Wilcox (Oracle)1-2/+1
Patch series "Make working with compound pages easier", v2. These three patches add three helpers and convert the appropriate places to use them. This patch (of 3): It's unnecessarily hard to find out the size of a potentially huge page. Replace 'PAGE_SIZE << compound_order(page)' with page_size(page). Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds5-60/+37
Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-75/+17
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-17Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-3/+5
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-11xen/arm: remove xen_dma_opsChristoph Hellwig1-1/+2
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no need for a pointer indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-11xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainanceChristoph Hellwig1-7/+1
Copy the arm64 code that uses the dma-direct/swiotlb helpers for DMA on-coherent devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-09-10ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundaryChester Lin1-0/+3
adjust_lowmem_bounds() checks every memblocks in order to find the boundary between lowmem and highmem. However some memblocks could be marked as NOMAP so they are not used by kernel, which should be skipped while calculating the boundary. Signed-off-by: Chester Lin <clin@suse.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-09-06ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned ↵Mike Rapoport1-0/+16
address The calculation of memblock_limit in adjust_lowmem_bounds() assumes that bank 0 starts from a PMD-aligned address. However, the beginning of the first bank may be NOMAP memory and the start of usable memory will be not aligned to PMD boundary. In such case the memblock_limit will be set to the end of the NOMAP region, which will prevent any memblock allocations. Mark the region between the end of the NOMAP area and the next PMD-aligned address as NOMAP as well, so that the usable memory will start at PMD-aligned address. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-09-04arm: remove wrappers for the generic dma remap helpersChristoph Hellwig1-27/+5
Remove a few tiny wrappers around the generic dma remap code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: introduce a dma_common_find_pages helperChristoph Hellwig1-6/+1
A helper to find the backing page array based on a virtual address. This also ensures we do the same vm_flags check everywhere instead of slightly different or missing ones in a few places. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: always use VM_DMA_COHERENT for generic DMA remapChristoph Hellwig1-6/+4
Currently the generic dma remap allocator gets a vm_flags passed by the caller that is a little confusing. We just introduced a generic vmalloc-level flag to identify the dma coherent allocations, so use that everywhere and remove the now pointless argument. Signed-off-by: Christoph Hellwig <hch@lst.de>