summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/allwinner
AgeCommit message (Collapse)AuthorFilesLines
2024-02-23arm64: dts: allwinner: h616: Add thermal sensor and zonesMartin Botka1-0/+88
There are four thermal sensors: - CPU - GPU - VE - DRAM Add the thermal sensor configuration and the thermal zones. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240219153639.179814-8-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board supportJisheng Zhang3-0/+220
The Sipeed Longan SoM 3H is a system on module based on the Allwinner H618 SoC. The SoM features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2/4 GiB LPDDR4 DRAM SoMs - AXP313a PMIC - eMMC The Sipeed Longan PI 3H is a development board based on the above SoM. The board features: - Longan SoM 3H - Raspberry-Pi-1 compatible GPIO header - 2 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - 1Gbps Ethernet port (via RTL8211 PHY) - HDMI port - WiFi/BT chip Add the devicetree file describing the currently supported features, namely PMIC, LEDs, UART, SD card, eMMC, USB and Ethernet. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240211081739.395-3-jszhang@kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: minor whitespace cleanupKrzysztof Kozlowski1-1/+1
The DTS code coding style expects exactly one space before '{' character. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240208105301.129005-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski3-3/+3
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240208105301.129005-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodesAndre Przywara1-0/+23
In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T TV box uses a mainline supported WiFi chip: it's Broadcom 4335 compatible, packaged by Murata. Add the required DT nodes to let DT users know about the SDIO device. There is an otherwise empty MMC device node, to receive the MAC address, that firmware might want to write in there. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240209115759.3582869-3-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: Add 32K fanout pinAndre Przywara1-0/+6
On some boards the designers saved on a 32KHz crystal for some external chips, so the SoC has to help out, with providing a 32 KHz clock signal. Add a pinctrl group node to allow DT nodes to reference this fanout signal. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240209115759.3582869-2-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: Add Jide Remix Mini PC supportAndre Przywara2-0/+357
The Remix Mini PC is a "mini computer" using the Allwinner H64 SoC, which appears to be just a relabelled A64. It was launched in 2015 by the now defunct company Jide, and shipped with a desktop optimised version of Android. It features - Allwinner H64 Soc (4 * Arm Cortex-A53 cores) - 1 or 2 GB DRAM - 8 or 16 GB eMMC flash - 100 MBit Ethernet port (using an X-Powers AC200 PHY) - RTL8723BS WiFi & Bluetooth chip - HDMI port - two USB 2.0 ports - 3.5mm AV port - microSD card slot The devicetree covers most peripherals, though there is no agreed binding for the PHY chip yet, so this is left out. The eMMC did not work with the MMC DDR speed mode, so this mode property is omitted. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240209114018.3580370-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: Add SPDIF device nodeChen-Yu Tsai1-0/+20
The H616 SoC has an SPDIF transmitter hardware block, which has the same layout as the one in the H6, minus the receiver side. Add a device node for it, and a default pinmux. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240127163247.384439-8-wens@kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: Add DMA controller and DMA channelsChen-Yu Tsai1-0/+41
The DMA controllers found on the H616 and H618 are the same as the one found on the A100. The only difference is the DMA endpoint (DRQ) layout. Add a device node for it, and add DMA channels for existing peripherals. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240127163247.384439-7-wens@kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h6: Add RX DMA channel for SPDIFChen-Yu Tsai3-4/+7
The SPDIF hardware found on the H6 supports both transmit and receive functions. However it is missing the RX DMA channel. Add the SPDIF hardware block's RX DMA channel. Also remove the by-default pinmux, since the end device can choose to implement either or both functionalities. Fixes: f95b598df419 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240127163247.384439-6-wens@kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-02-23arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to MakefileJernej Skrabec1-0/+1
Orange Pi Zero 2W dts file is not included in Makefile. Fix this. Fixes: c505ee1eae18 ("arm64: dts: allwinner: h616: add Orange Pi Zero 2W support") Reviewed-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240222211326.114955-1-jernej.skrabec@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-01-11Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-0/+338
Pull SoC DT updates from Arnd Bergmann: "There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both the Rockchips rv1109 and Sopgho CV1812H are just minor variations of already supported chips. The other six new SoCs are all part of existing arm64 families, but are somewhat more interesting: - Samsung ExynosAutov920 is an automotive chip, and the first one we support based on the Cortex-A78AE core with lockstep mode. - Google gs101 (Tensor G1) is the chip used in a number of Pixel phones, and is grouped with Samsung Exynos here since it is based on the same SoC design, sharing most of its IP blocks with that series. - MediaTek MT8188 is a new chip used for mid-range tablets and Chromebooks, using two Cortex-A78 cores where the older MT8195 had four of them. - Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range phone SoC and the first supported chip based on Cortex-X4, Cortex-A720 and Cortex-A520. - Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop chip using the custom Oryon cores. - Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on Cortex-A76 and Cortex-A55 In terms of boards, we have - Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs. - Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub and a few Rockchips SBCs - Some ComXpress boards based on Marvell CN913x, which is the follow-up to Armada 7xxx/8xxx. - Six new industrial/embedded boards based on NXP i.MX8 and i.MX9 - Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer. - Toradex Verdin AM62 Mallow carrier for TI AM62 - Huashan Pi board based on the SophGo CV1812H RISC-V chip - Two boards based on Allwinner H616/H618 - A number of reference boards for various added SoCs from Qualcomm, Mediatek, Google, Samsung, NXP and Spreadtrum As usual, there are cleanups and warning fixes across all platforms as well as added features for several of them" * tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits) ARM: dts: usr8200: Fix phy registers arm64: dts: intel: minor whitespace cleanup around '=' arm64: dts: socfpga: agilex: drop redundant status arm64: dts: socfpga: agilex: add unit address to soc node arm64: dts: socfpga: agilex: move firmware out of soc node arm64: dts: socfpga: agilex: move FPGA region out of soc node arm64: dts: socfpga: agilex: align pin-controller name with bindings arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings arm64: dts: socfpga: stratix10: add unit address to soc node arm64: dts: socfpga: stratix10: move firmware out of soc node arm64: dts: socfpga: stratix10: move FPGA region out of soc node arm64: dts: socfpga: stratix10: align pincfg nodes with bindings arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size ARM: dts: socfpga: align NAND controller name with bindings ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size arm64: dts: rockchip: Fix led pinctrl of lubancat 1 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6 arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b ...
2023-12-14arm64: dts: allwinner: h618: add Transpeed 8K618-T TV boxAndre Przywara2-0/+162
This is a Chinese TV box, probably very similar if not identical to various other cheap TV boxes with the same specs: - Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache) - 2 or 4GiB DDR3L DRAM - 32, 64, or 128 GiB eMMC flash - AXP313a PMIC - 100 Mbit/s Ethernet (using yet unsupported internal PHY) - HDMI port - 2 * USB 2.0 ports - microSD card slot - 3.5mm A/V port - 7-segment display - 5V barrel plug power supply The PCB provides holes for soldering a UART header or cable, this is connected to the debug UART0. UART1 is used for the Bluetooth chip, although this isn't working yet. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-11-19arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3Chukun Pan3-3/+5
The current emac setting is not suitable for Orange Pi Zero 3, move it back to Orange Pi Zero 2 DT. Also update phy mode and delay values for emac on Orange Pi Zero 3. With these changes, Ethernet now looks stable. Fixes: 322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-11-19arm64: dts: allwinner: h616: add Orange Pi Zero 2W supportAndre Przywara1-0/+176
The Orange Pi Zero 2W is a board based on the Allwinner H618 SoC. It uses the RaspberryPi Zero form factor, with an optional expansion board, connected via an FPC connector, to provide more connectors. The base board features: - Allwinner H618 SoC (quad Cortex-A53 cores, with 1MB L2 cache) - 1, 2 or 4GB of LPDDR4 DRAM - SD card socket - two USB-C sockets, one UFP, one DFP - HDMI connector - (yet unsupported) WiFi module - 16 MiB SPI flash - power supply via the UFP USB-C port The FPC connector provides access to two more USB host ports, Fast Ethernet, some GPIOs, Audio Line out and the IR receiver pin. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20231020145706.705420-3-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24arm64: dts: allwinner: h616: Add BigTreeTech Pi supportMartin Botka2-0/+64
The BigTreeTech Pi is an H616 based board based on CB1. Just in Rpi format board. It features the same internals as BTT CB1 but adds: - Fan port - IR receiver - ADXL345 Accelerometer connector via SPI - 24V DC power supply via terminal plugs - USB to CAN module connector (External Module) List of currently working things is same as BTT CB1 but also: - IR receiver - ADXL345 connector Signed-off-by: Martin Botka <martin@biqu3d.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-4-bb11238f3a9c@somainline.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards supportMartin Botka3-0/+174
CB1 is Compute Module style board that plugs into Rpi board style adapter or Manta 3D printer boards (M4P/M8P). The SoM features: - H616 SoC - 1GiB of RAM - AXP313A PMIC - RTL8189FTV WiFi Boards feature: - 4x USB via USB2 hub (usb1 on SoM). - SDcard slot for loading images. - Ethernet port wired to the internal PHY. (100M) - 2x HDMI 2.0. (Only 1 usable on CB1) - Power and Status LEDs. (Only Status LED usable on CB1) - 40 pin GPIO header Currently working: - Booting - USB - UART - MMC - Status LED - WiFi (RTL8189FS via out of tree driver) I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter. CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM. Signed-off-by: Martin Botka <martin.botka@somainline.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-3-bb11238f3a9c@somainline.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24arm64: dts: allwinner: h616: Add SID controller nodeMartin Botka1-0/+7
Add node for the H616 SID controller Signed-off-by: Martin Botka <martin.botka@somainline.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230912-sid-h616-v3-2-ee18e1c5bbb5@somainline.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-08-29arm64: dts: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski7-7/+7
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # Broadcom Link: https://lore.kernel.org/r/20230823085146.113562-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-06arm64: dts: allwinner: h616: Add OrangePi Zero 3 board supportAndre Przywara2-0/+95
The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, which seems to be just an H616 with more L2 cache. The board itself is a slightly updated version of the Orange Pi Zero 2. It features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) - AXP313a PMIC (more capable AXP305 on the Zero2) - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) - 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip Add the devicetree file describing the currently supported features, namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at the moment, though the basic functionality works. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-08-06arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DTAndre Przywara2-118/+135
The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some DT nodes with the Zero 2, but comes with a different PMIC. Move the common parts (except the PMIC) into a new shared file, and include that from the existing board .dts file. No functional change, the generated DTB is the same, except for some phandle numbering differences. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring6-6/+6
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-19ARM: dts: sunxi: rename tcon's clock outputRoman Beranek1-1/+1
While the rate of TCON0's DCLK matches dotclock for parallel and LVDS outputs, this doesn't hold for DSI. According manuals from Allwinner, DCLK is an abbreviation of Data Clock, not dotclock, so go with that instead. Signed-off-by: Roman Beranek <me@crly.cz> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20230505052110.67514-3-me@crly.cz Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-05-16arm64: dts: allwinner: a64: add missing cache propertiesKrzysztof Kozlowski1-0/+1
As all level 2 and level 3 caches are unified, add required cache-unified property to fix warnings like: sun50i-a64-pine64-lts.dtb: l2-cache: 'cache-unified' is a required property Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230421223137.115015-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-14arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFSAndre Przywara1-0/+1
So far the OrangePi PC2 board was running at a fixed frequency, set by U-Boot to 816 MHz, which is the best achievable frequency at the 1.1V CPU voltage provided by the PMIC at reset. We already describe the CPU voltage regulator in the DT, but were missing the OPP table. Just include the default H5 OPP table, as used by other boards. My OrangePi PC2 runs just fine with those values, and now goes up to 1.15 GHz. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230228114112.3340715-1-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-01-28arm64: dts: allwinner: a64: Add DPHY interruptSamuel Holland1-0/+1
The DPHY has an interrupt line which is shared with the DSI controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221114022113.31694-4-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-12-12Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds5-10/+240
Pull ARM SoC DT updates from Arnd Bergmann: "The devicetree changes contain exactly 1000 non-merge changesets, including a number of new arm64 SoC variants from Qualcomm and Apple, as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants. While we have occasionally merged support for non-arm SoCs in the past, this is now the normal path for riscv devicetree files. The most notable changes, by SoC platform, are: - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips now have initial support. This is particularly nice as I am typing this on a T6002 Mac Studio with only a small number of driver patches. - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile phone chips that are closely related to others we already support. Adding those helps support more phones and we add several models from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3, 3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google (Pixel 3a). There are also new variants of the Herobrine and Trogdor chromebook motherboards. SA8540P is an automotive SoC used in the Qdrive-3 development platform - Rockchips gains no new SoC variants, but a lot of new boards: three mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two more Anbernic gaming systems based on RK3566 and a number of other RK356x based single-board computers. - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as the newly added RZ/Five is based on the same design, this now gets reorganized in order to share most of the dts description between the two and add the RZ/Five SMARC EVK board support. Aside from that, there are the usual changes all over the tree: - New boards on other platforms contain two ASpeed BMC users, two Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo Aura2 ebook reader, two i.MX8 based development boards, two Uniphier Pro5 development boards, the STM32MP1 testbench board from DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10 based Sony Xperia M5 phone. - The Starfive JH7100 source gets reorganized in order to support the VisionFive V1 board. - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton, Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500, spear, ... The treewide cleanups now have a lot of fixes for cache nodes and other binding violoations. - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and Renesas platforms, adding a lot more on-chip device support - A rework of the way that DTB overlays are built" * tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits) arm64: dts: apple: t6002: Fix GPU power domains arm64: dts: apple: t600x-pmgr: Fix search & replace typo arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes arm64: dts: apple: Rename dart-sio* to sio-dart* arch: arm64: apple: t600x: Use standard "iommu" node name arch: arm64: apple: t8103: Use standard "iommu" node name ARM: dts: socfpga: Fix pca9548 i2c-mux node name dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define dt-bindings: iio: adc: qcom,spmi-vadc: extend example arm64: dts: qcom: sc8280xp: fix UFS DMA coherency arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI arm64: dts: qcom: sm8450: align MMC node names with dtschema arm64: dts: qcom: sc7180-trogdor: use generic node names arm64: dts: qcom: sm8450-hdk: add sound support arm64: dts: qcom: sm8450: add Soundwire and LPASS ...
2022-11-16arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2Chen-Yu Tsai1-0/+1
The Hantro G2 video decoder block sits behind the IOMMU. Without a reference for the system to properly configure the IOMMU, it will fault and cause the video decoder to fail. Add a proper reference to the IOMMU port. The master ID is taken from the IOMMU fault error message on Linux, and the number seems to match the order in the user manual's IOMMU diagram. Fixes: 0baddea60e8d ("arm64: dts: allwinner: h6: Add Hantro G2 node") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221115090644.3602573-3-wenst@chromium.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-07arm64: dts: allwinner: a64: enable Bluetooth on PinebookVasily Khoruzhick1-0/+14
Pinebook has an RTL8723CS WiFi + BT chip. BT is connected to UART1 and uses PL5 as device wake GPIO and PL6 as host wake GPIO. Enable it in the device tree. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Bastian Germann <bage@debian.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221105153319.19345-2-bage@debian.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-07arm64: dts: allwinner: h616: X96 Mate: Add USB nodesAndre Przywara1-0/+25
The X96 Mate TV box has two USB-A ports, VBUS is always on and connected to the DC input. Since USB port 0 is connected to an USB-A receptable, we configure it as a host port. Using it as a peripheral is dangerous, because VBUS is always on. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221031111358.3387297-8-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-07arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodesAndre Przywara1-0/+41
The OrangePi Zero 2 has one USB-A host port, VBUS is provided by a GPIO controlled regulator. The USB-C port is meant to power the board, but is also connected to the USB 0 port, which we configure as an MUSB peripheral. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-07arm64: dts: allwinner: h616: Add USB nodesAndre Przywara1-0/+160
Add the nodes for the MUSB and the four USB host controllers to the SoC .dtsi, along with the PHY node needed to bind all of them together. EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires some quirks (handled in the driver). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-10-26ARM: dts: axp803/axp81x: Drop GPIO LDO pinctrl nodesSamuel Holland1-10/+0
The "ldo-io0" and "ldo-io1" regulators are enabled/disabled by toggling the pinmux between two functions. This happens in the regulator driver. Setting the pinmux to "ldo" in the DT is inappropriate because it would enable the regulator before the driver has a chance to set the correct initial voltage. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220916042751.47906-2-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-09-08arm64: dts: allwinner: beelink-gs1: Enable GPU OPPClément Péron1-0/+1
Enable GPU OPP table for Beelink GS1. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-6-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add GPU OPP tableClément Péron1-0/+87
Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6. The voltage range is set with minimal voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add cooling map for GPUClément Péron1-2/+49
Add a simple cooling map for the GPU. This cooling map come from the vendor kernel 4.9 with a 2°C hysteresis added. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: a100: Add I2C DMA requestsSamuel Holland1-0/+12
The I2C controllers in the A100 SoC are all connected to the DMA engine. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
2022-09-08arm64: dts: allwinner: a100: Add device node for DMA controllerYangtao Li1-0/+12
The A100 SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
2022-07-09arm64: dts: allwinner: h616: Add X96 Mate TV box supportAndre Przywara2-0/+178
The X96 Mate is an Allwinner H616 based TV box, featuring: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2GiB/4GiB RAM (fully usable!) - 16/32/64GiB eMMC - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) - Unsupported Allwinner WiFi chip - 2 x USB 2.0 host ports - HDMI port - IR receiver - 5V/2A DC power supply via barrel plug Add a basic devicetree for it, with SD card and eMMC working, as well as serial and the essential peripherals, like the AXP PMIC. This DT is somewhat minimal, and should work on many other similar TV boxes with the Allwinner H616 chip. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-8-andre.przywara@arm.com
2022-07-09arm64: dts: allwinner: h616: Add OrangePi Zero 2 board supportAndre Przywara2-0/+214
The OrangePi Zero 2 is a development board with the new H616 SoC. It comes with the following features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 512MiB/1GiB DDR3 DRAM - AXP305 PMIC - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 2MiB bootable SPI NOR flash - 1Gbps Ethernet port (via RTL8211F PHY) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chip Add the devicetree file describing the currently supported features. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com
2022-07-09arm64: dts: allwinner: Add Allwinner H616 .dtsi fileAndre Przywara1-0/+591
This (relatively) new SoC is similar to the H6, but drops the (broken) PCIe support and the USB 3.0 controller. It also gets the management controller removed, which in turn removes *some*, but not all of the devices formerly dedicated to the ARISC (CPUS). And while there is still the extra sunxi interrupt controller, the package lacks the corresponding NMI pin, so no interrupts for the PMIC. The reserved memory node is actually handled by Trusted Firmware now, but U-Boot fails to propagate this to a separately loaded DTB, so we keep it in here for now, until U-Boot learns to do this properly. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708105235.3983266-4-andre.przywara@arm.com
2022-07-08arm64: dts: allwinner: pinephone: Enable internal HMIC biasSamuel Holland2-0/+8
Revisions 1.0 and 1.1 of the PinePhone mainboard do not have an external resistor connecting HBIAS to MIC2P. Enable the internal resistor to provide the necessary headeset microphone bias. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220621035452.60272-4-samuel@sholland.org
2022-07-05arm64: dts: allwinner: a100: Update I2C controller fallbackSamuel Holland1-0/+6
The I2C controllers in the A100 SoC are newer-generation hardware which includes an offload engine. Signify that by including the allwinner,sun8i-v536-i2c fallback compatible, as V536 is the first SoC with this generation of I2C controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702052544.31443-2-samuel@sholland.org
2022-07-04arm64: dts: allwinner: a64: orangepi-win: Fix LED node nameSamuel Holland1-1/+1
"status" does not match any pattern in the gpio-leds binding. Rename the node to the preferred pattern. This fixes a `make dtbs_check` error. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
2022-06-14arm64: dts: allwinner: align gpio-key node names with dtschemaKrzysztof Kozlowski4-8/+8
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220609113911.380368-4-krzysztof.kozlowski@linaro.org
2022-06-13arm64: dts: allwinner: Use constants for RTC clock indexesSamuel Holland9-20/+24
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by the hardware. Let's use the names, so the meaning is clearer. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220607012438.18183-2-samuel@sholland.org
2022-05-03arm64: dts: allwinner: teres-i: Add GPIO port regulatorsHarald Geyer1-0/+8
Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. Signed-off-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220430191009.73946-1-harald@ccbib.org
2022-04-10arm64: dts: allwinner: a64: olinuxino: Enable audioPhilip Rinn1-0/+30
Enable the audio hardware on the Olimex A64-OLinuXino board family. Tested on the A64-OLinuXino-2Ge8G-IND variant. Signed-off-by: Philip Rinn <rinni@inventati.org> Acked-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220407155145.10891-1-rinni@inventati.org
2022-01-10Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds11-132/+243
Pull ARM SoC devicetree updates from Arnd Bergmann: "As usual, this is the bulk of the updates for the SoC tree, adding more devices to existing files, addressing issues from ever improving automated checking, and fixing minor issues. The most interesting bits as usual are the new platforms. All the newly supported SoCs belong into existing families this time: - Qualcomm gets support for two newly announced platforms, both of which can now work in production environments: the SDX65 5G modem that can run a minimal Linux on its Cortex-A7 core, and the Snapdragon 8 Gen 1, their latest high-end phone SoC. - Renesas adds support for R-Car S4-8, the most recent automotive Server/Communication SoC. - TI adds support for J721s2, a new automotive SoC in the K3 family. - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest generation following their popular MT76xx series. Only basic support is added for now. - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8 series. - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we have supported for a long time. New boards with the existing SoCs include - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers - AT91/SAMA5 based evaluation board - NXP gains twenty new development and industrial boards for their i.MX and Layerscape SoCs - Intel IXP4xx now supports the final two machines in device tree that were previously only supported in old style board files. - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while MT8183 is used in the Acer Chromebook 314. - Qualcomm gains support for the reference machines using the two new SoCs, plus a number of Chromebook variants and phones based on the Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia devices and the Microsoft Surface Duo 2. - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board. - Tegra now boots various older Android devices based on 32-bit chips out of the box, including a number of ASUS Transformer tablets. There is also a new Jetson AGX Orin developer kit. - Apple support adds the missing device trees for all the remaining M1 Macbook and iMac variants, though not yet the M1 Pro/Max versions. - Allwinner now supports another version of the Tanix TX6 set-top box based on the H6 SoC. - Broadcom gains support for the Netgear RAXE500 Wireless router based on BCM4908" * tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits) Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U" arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property ARM: dts: aspeed: add LCLK setting into LPC IBT node ARM: dts: aspeed: p10: Add TPM device ARM: dts: aspeed: p10: Enable USB host ports ARM: dts: aspeed: Add TYAN S8036 BMC machine ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config ARM: dts: aspeed: Adding Facebook Bletchley BMC ARM: dts: aspeed: g220a: Enable secondary flash ARM: dts: Add openbmc-flash-layout-64-alt.dtsi ARM: dts: aspeed: Add secure boot controller node dt-bindings: aspeed: Add Secure Boot Controller bindings ARM: dts: Remove "spidev" nodes dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 dt-bindings: arm: samsung: Document E850-96 board binding dt-bindings: Add vendor prefix for WinLink ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 07:07:06 +0300