summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/pm660.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-08-03arm64: dts: qcom: Use labels with generic node names for ADC channelsMarijn Suijten1-11/+22
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. Follow up on the dt-bindings' `channel` node name requirement, and instead provide this (sometimes per-board) channel description through a label property. Also remove all the unused label references (not to be confused with label properties) from pm660, pmp8074 and pms405. [1]: https://lore.kernel.org/linux-arm-msm/20221106193018.270106-1-marijn.suijten@somainline.org/T/#u [2]: https://lore.kernel.org/linux-arm-msm/20230116220909.196926-4-marijn.suijten@somainline.org/ Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230730-generic-adc-channels-v5-2-e6c69bda8034@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-03-22arm64: dts: qcom: pm660: align thermal node names with bindingsKrzysztof Kozlowski1-1/+1
Bindings expect thermal node names to end with '-thermal', so fix pm660 and pm660l: sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org
2022-11-06arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node nameMarijn Suijten1-1/+1
The register address in the node name is shadowing vph_pwr@83, whereas the ADC5_VCOIN register resolves to 0x85. Fix this copy-paste discrepancy. Fixes: 4bf097540506 ("arm64: dts: qcom: pm660: Add VADC and temp alarm nodes") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926190148.283805-3-marijn.suijten@somainline.org
2022-10-18arm64: dts: qcom: use generic node name "gpio" in SPMI PMICKrzysztof Kozlowski1-1/+1
GPIO controller nodes are named by convention just "gpio", not "gpios". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org
2022-08-30arm64: dts: qcom: align SPMI PMIC regulators node name with dtschemaKrzysztof Kozlowski1-1/+1
Bindings expect regulators node name to be "regulators": qcom/sdm630-sony-xperia-nile-voyager.dtb: pmic@3: 'pm660l-regulators' does not match any of the regexes Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220828084341.112146-8-krzysztof.kozlowski@linaro.org
2022-06-28arm64: dts: qcom: add fallback compatible to PMIC GPIOsKrzysztof Kozlowski1-1/+1
The bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback. Add the fallback to fix warnings like: msm8916-samsung-serranove.dtb: gpios@c000: compatible: ['qcom,pm8916-gpio'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-7-krzysztof.kozlowski@linaro.org
2021-11-21arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsiDang Huynh1-1/+11
It's not worth duplicating the same node over and over again, so let's keep the common bits in the pm660 DTSI, making only changing the status and keycode necessary. Also, disable RESIN/PWR by default just in case if there are devices that doesn't use them. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dang Huynh <danct12@riseup.net> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211120214227.779742-3-danct12@riseup.net
2021-09-25arm64: dts: qcom: pm660: Add reboot mode supportShawn Guo1-2/+3
It turns out that the pm660 PON is a GEN2 device. Update the compatible to "qcom,pm8998-pon" and add reboot mode support, so that devices can be rebooted into bootloader and recovery mode. Tested on Xiaomi Redmi Note 7 phone. While at it, drop the unnecessary newline between 'compatible' and 'reg' property. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210824021918.17271-1-shawn.guo@linaro.org
2021-08-04arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodesKonrad Dybcio1-0/+122
Add VADC, temperature alarm and thermal zones for pm660(l) to allow for temperature and voltage readouts and prevent PMIC overheating. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-24-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1AngeloGioacchino Del Regno1-0/+11
The PM660 PMIC has SPMI regulators on the PMIC SID 1: let's declare the second pmic subtree and add the spmi vregs compatible to probe them there. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222542.54269-21-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-15arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cellsŁukasz Patron1-1/+1
Also add a space after '=' while at it. Tested-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Link: https://lore.kernel.org/r/20200725082417.8507-1-priv.luk@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23arm64: dts: qcom: pm660(l): Add base dts filesKonrad Dybcio1-0/+50
Add base DTS files for pm660(l) along with GPIOs, power-on and rtc nodes. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200622192558.152828-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-17 19:08:34 +0300