Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
|
Update the compatible for the Realtek RTL8821CS bluetooth node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
These are implemented via regular ADC, so regular polling is needed,
for these keys to work.
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230405123813.2272919-1-pbrobinson@gmail.com
[increased Volume-Down voltage to 600mV as suggested by Ondrej]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK8602 and RK8603 voltage regulators on the Rock 5B board provide
the power lines vdd_cpu_big0 and vdd_cpu_big1, respectively.
Add the necessary device tree nodes and bind them to the corresponding
CPU big core nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use generic 'audio-codec' name for es8316 node on Pinebook Pro and Rock
5B boards.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The hym8563 RTC driver doesn't handle the 'clock-frequency' property,
which is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
From schema: Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
Drop the unsupported property.
Fixes: 1e9c2404d887 ("arm64: dts: rockchip: Enable RTC support for Rock 5B")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add gpio-range properties to the pinctrl gpio nodes in rk356x.dtsi
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20230413170337.6815-1-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the newly mainlined panel to the RG353 series of
devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221126011432.22891-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Anbernic and Odroid Go have different panels and take differently
named supplies, so move all the supplies to DTS defining actual panel to
fix warnings like:
rk3326-odroid-go3.dtb: panel@0: 'IOVCC-supply' is a required property
rk3326-odroid-go3.dtb: panel@0: 'iovcc-supply', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-rockpro64.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
There is only one endpoint, so use simpler form without "reg".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-pinebook-pro.dtb: edp-panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the necessary DT nodes for the Rock 5B board to enable the analog
audio support provided by the Everest Semi ES8316 codec.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-6-cristian.ciocaltea@collabora.com
[adapted to the fan addition I applied slightly earlier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In addition to the five I2S/PCM/TDM controllers and the two I2S/PCM
controllers shared between the RK3588 and RK3588S SoCs, RK3588 provides
another group of four I2S/PCM/TDM controllers.
Add the DT nodes corresponding to the additional controllers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-5-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There are five I2S/PCM/TDM controllers and two I2S/PCM controllers
embedded in the RK3588 and RK3588S SoCs.
Add the DT nodes corresponding to the above mentioned Rockchip
controllers.
Also note RK3588 SoC contains four additional I2S/PCM/TDM controllers,
which are handled via a separate patch.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The clock rate for PLL_PPLL has been wrongly initialized to 100 MHz
instead of 1.1 GHz. Fix it.
Fixes: c9211fa2602b ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Since commit df4fdd0db475 ("dt-bindings: firmware: arm,scmi: Restrict
protocol child node properties") the following dtbs_check warning is
shown:
rk3588-rock-5b.dtb: scmi: protocol@14: Unevaluated properties are not
allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected)
Because adding the missing properties to firmware/arm,scmi.yaml binding
document was not an acceptable solution, move SCMI_CLK_CPUB01 and
SCMI_CLK_CPUB23 assigned clocks to the related CPU nodes and also add
the missing SCMI_CLK_CPUL.
Additionally, adjust frequency to 816 MHz for all the above mentioned
assigned clocks, in order to match the firmware defaults.
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230402095054.384739-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add thermal sensor IP, which allows monitoring temperatures at
seven different places in the SoC:
* Chip Center
* CPU Cluster 1 (Dual A76 "Big" Cores)
* CPU Cluster 2 (Dual A76 "Big" Cores)
* CPU Cluster 0 (Quad A55 "Little" Cores)
* Power Domain Center
* Graphics Processing Unit
* Neural Processing Unit
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230404154429.51601-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the necessary DT changes for the Rock 5B board to enable support for
the PWM controlled heat sink fan.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230404173807.490520-3-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add DT node to enable RTC support for Rock 5B board.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230405082711.46303-1-shreeya.patel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There is neither a driver that parses this nor a DT binding schema that
documents it, so let's remove from the DTS files that make use of this.
The properties that exist are post-pwm-on-delay-ms and pwm-off-delay-ms,
defined in the pwm-backlight DT binding. If the delays are really needed
then those properties should be used instead.
Brian Norris mentioned though that looking at the first downstream usage
of the pwm-delay-us property for RK3399 Gru systems in ChromiumOS tree,
he couldn't find a spec reference that said that this was really needed.
So perhaps it was unnecessary added and a simple removal would be enough.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20230330231924.2404747-1-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
For the Anbernic devices to display properly, we need to specify the
clock frequency of the PLL_VPLL. Adding the parent clock in the
rk356x.dtsi requires us to update our clock definitions to accomplish
this.
Fixes: 64b69474edf3 ("arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230327153547.821822-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
identical to OrangePi R1 Plus.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The phone has a Goodix GT1158 touchscreen, add a DT node for it.
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230328073309.1743112-3-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The phone's display is using a Hannstar LCD panel. Support it by adding a
panel DT node and all needed nodes (backlight, MIPI DSI, regulators, etc).
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230328073309.1743112-2-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add DT node for watchdog support in RK3588.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20230328210048.195124-2-shreeya.patel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The hclk is not used in the dw-mipi-dsi binding,
so remove hclk from the rk356x.dtsi dsi node.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/4df211eb-4fcd-ee20-48a1-ce7712de552c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
'vbus-supply' does not match any of the regexes in rk3566-box-demo.dts
in the usb2phy0_otg node, so rename vbus-supply to phy-supply.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/1889d8ee-e119-4a52-33a1-b990a41a137c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use generic node name for rk3399.dtsi dp node.
With the conversion of rockchip,analogix-dp.yaml a port@1 node
is required, so add a node with label edp_out.
Also restyle.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f6008819-db9b-0944-3f5b-5522b7cd8a8d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use generic node name for rk3399.dtsi dsi node.
With the conversion of rockchip,dw-mipi-dsi.yaml a port@1 node
is required, so add a node with label mipi_out.
Also restyle.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/1e019e9e-a8da-3d57-2770-f6b81bbbf591@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
With the conversion of rockchip,dw-mipi-dsi.yaml a port@1 node
is required, so add a node with label dsi_out.
Also add label dsi_in to port@0.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/1ee3e676-aef4-f464-82b0-8fb39ba5c60d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
With the conversion of rockchip,lvds.yaml a port@1 node
is required, so add a node with label lvds_out.
Also add label lvds_in to port@0.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/99895a4b-25c4-4b64-42ac-6f70940ab56e@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This is for the audio output which does not exist on the boards.
Also disable regulator-always-on for vccio_acodec since it's only
used by the audio output.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
- Changed phy-mode to rgmii.
- Fixed pull type in pinctrl for gmac0.
- Removed duplicate properties in mdio node.
These properties are defined in the gmac0 node already.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Create common dtsi for the FriendlyElec NanoPi R5 series.
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20230318083745.6181-2-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add missing, mandatory cache-level information for RK3588.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230317174102.61209-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, SD card slot
- GbE LAN (Native)
- 2x 2.5G LAN (PCIe)
- M.2 Connector
- HDMI 2.0, MIPI DSI/CSI
- 2xUSB 3.0 Host
- USB Type C PD, 5V/9V/12V
- GPIO: 12-pin 0.5mm FPC connector
Based on Tianling Shen's <cnsztl@gmail.com> work.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Edge2 is an ultraslim, credit-card sized ARM PC designed by Khadas.
In this patch, we will add basic device tree support for this board,
Only eMMC, UART are enabled, so it's capable of booting into
a basic linux system from eMMC via serial console.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20230315033441.32719-3-dlan@gentoo.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Note that orientation property in ST7701 driver is currently missing,
And that ST7701 panel driver uses different regulator names compared to
driver for Elida KD35T133 driver.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20230213153816.213526-5-maccraft123mc@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable USB OTG support for Radxa Compute Module 3 IO Board
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230223135929.630787-1-abbaraju.manojsai@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add SD Card node for RK3588s and RK3588.
Co-developed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Link: https://lore.kernel.org/r/20230228103610.25108-1-lucas.tanure@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
MicroSD card slot in the Pinebook Pro is located on a separate
daughterboard that's connected to the mainboard using a rather
long flat cable. The resulting signal degradation causes many
perfectly fine microSD cards not to work in the Pinebook Pro,
which is a common source of frustration among the owners.
Changing the mode and lowering the speed reportedly fixes this
issue and makes many microSD cards work as expected.
Co-developed-by: Dragan Simic <dragan.simic@gmail.com>
Signed-off-by: Dragan Simic <dragan.simic@gmail.com>
Tested-by: JR Gonzalez <jrg@scientiam.org>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230305104730.15849-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Just like the Quartz64 Model B the previously stated speed of sdr-104
in soquartz is too high for the hardware to reliably communicate with
some fast SD cards.
Especially on some carrierboards.
Lower this to sd-uhs-sdr50 to fix this.
Fixes: 5859b5a9c3ac ("arm64: dts: rockchip: add SoQuartz CM4IO dts")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Acked-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20230304164135.28430-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The GICv3 ITS is an MSI controller, therefore its node name should be
'msi-controller'.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207234750.202154-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
|
Bindings expect certain pattern for OPP table node name and underscores
are not allowed:
rk3399-rock-pi-4a-plus.dtb: dmc_opp_table: $nodename:0: 'dmc_opp_table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230119124631.91080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As other rk336x based devices, the Rock 3 Model A has issues with high
speed SD cards, so lower the speed to 50 instead of 104 in the same
manor has the Quartz64 Model B has.
Fixes: 22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230128112432.132302-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|