| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently we strip the PAC from pointers using C code, which requires
generating bitmasks, and conditionally clearing/setting bits depending
on bit 55. We can do better by using XPACLRI directly.
When the logic was originally written to strip PACs from user pointers,
contemporary toolchains used for the kernel had assemblers which were
unaware of the PAC instructions. As stripping the PAC from userspace
pointers required unconditional clearing of a fixed set of bits (which
could be performed with a single instruction), it was simpler to
implement the masking in C than it was to make use of XPACI or XPACLRI.
When support for in-kernel pointer authentication was added, the
stripping logic was extended to cover TTBR1 pointers, requiring several
instructions to handle whether to clear/set bits dependent on bit 55 of
the pointer.
This patch simplifies the stripping of PACs by using XPACLRI directly,
as contemporary toolchains do within __builtin_return_address(). This
saves a number of instructions, especially where
__builtin_return_address() does not implicitly strip the PAC but is
heavily used (e.g. with tracepoints). As the kernel might be compiled
with an assembler without knowledge of XPACLRI, it is assembled using
the 'HINT #7' alias, which results in an identical opcode.
At the same time, I've split ptrauth_strip_insn_pac() into
ptrauth_strip_user_insn_pac() and ptrauth_strip_kernel_insn_pac()
helpers so that we can avoid unnecessary PAC stripping when pointer
authentication is not in use in userspace or kernel respectively.
The underlying xpaclri() macro uses inline assembly which clobbers x30.
The clobber causes the compiler to save/restore the original x30 value
in a frame record (protected with PACIASP and AUTIASP when in-kernel
authentication is enabled), so this does not provide a gadget to alter
the return address. Similarly this does not adversely affect unwinding
due to the presence of the frame record.
The ptrauth_user_pac_mask() and ptrauth_kernel_pac_mask() are exported
from the kernel in ptrace and core dumps, so these are retained. A
subsequent patch will move them out of <asm/compiler.h>.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230412160134.306148-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arm64 stacktrace code can be used in kprobe context, and so cannot
be safely probed. Some (but not all) of the unwind functions are
annotated with `NOKPROBE_SYMBOL()` to ensure this, with others markes as
`__always_inline`, relying on the top-level unwind function being marked
as `noinstr`.
This patch has stacktrace.c consistently mark the internal stacktrace
functions as `__always_inline`, removing the need for NOKPROBE_SYMBOL()
as the top-level unwind function (arch_stack_walk()) is marked as
`noinstr`. This is more consistent and is a simpler pattern to follow
for future additions to stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For historical reasons, the backtrace dumping functions are placed in
the middle of stacktrace.c, despite using functions defined later. For
clarity, and to make subsequent refactoring easier, move the dumping
functions to the end of stacktrace.c
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The function which calls the top-level backtracing function may have
been instrumented with ftrace and/or kprobes, and hence the first return
address may have been rewritten.
Factor out the existing fgraph / kretprobes address recovery, and use
this for the first address. As the comment for the fgraph case isn't all
that helpful, I've also dropped that.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230411162943.203199-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The EFI runtime services run from a dedicated stack now, and so the
stack unwinder needs to be informed about this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Mark arch_stack_walk() as noinstr instead of notrace and inline functions
called from arch_stack_walk() as __always_inline so that user does not
put any instrumentations on it, because this function can be used from
return_address() which is used by lockdep.
Without this, if the kernel built with CONFIG_LOCKDEP=y, just probing
arch_stack_walk() via <tracefs>/kprobe_events will crash the kernel on
arm64.
# echo p arch_stack_walk >> ${TRACEFS}/kprobe_events
# echo 1 > ${TRACEFS}/events/kprobes/enable
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
PREEMPT SMP
Modules linked in:
CPU: 0 PID: 17 Comm: migration/0 Tainted: G N 6.1.0-rc5+ #6
Hardware name: linux,dummy-virt (DT)
Stopper: 0x0 <- 0x0
pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kprobe_breakpoint_handler+0x178/0x17c
lr : kprobe_breakpoint_handler+0x178/0x17c
sp : ffff8000080d3090
x29: ffff8000080d3090 x28: ffff0df5845798c0 x27: ffffc4f59057a774
x26: ffff0df5ffbba770 x25: ffff0df58f420f18 x24: ffff49006f641000
x23: ffffc4f590579768 x22: ffff0df58f420f18 x21: ffff8000080d31c0
x20: ffffc4f590579768 x19: ffffc4f590579770 x18: 0000000000000006
x17: 5f6b636174735f68 x16: 637261203d207264 x15: 64612e202c30203d
x14: 2074657366666f2e x13: 30633178302f3078 x12: 302b6b6c61775f6b
x11: 636174735f686372 x10: ffffc4f590dc5bd8 x9 : ffffc4f58eb31958
x8 : 00000000ffffefff x7 : ffffc4f590dc5bd8 x6 : 80000000fffff000
x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff0df5845798c0 x0 : 0000000000000064
Call trace:
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
Fixes: 39ef362d2d45 ("arm64: Make return_address() use arch_stack_walk()")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/166994751368.439920.3236636557520824664.stgit@devnote3
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently unwind_next_frame_record() has an optional callback to convert
the address space of the FP. This is necessary for the NVHE unwinder,
which tracks the stacks in the hyp VA space, but accesses the frame
records in the kernel VA space.
This is a bit unfortunate since it clutters unwind_next_frame_record(),
which will get in the way of future rework.
Instead, this patch changes the NVHE unwinder to track the stacks in the
kernel's VA space and translate to FP prior to calling
unwind_next_frame_record(). This removes the need for the translate_fp()
callback, as all unwinders consistently track stacks in the native
address space of the unwinder.
At the same time, this patch consolidates the generation of the stack
addresses behind the stackinfo_get_*() helpers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we call an on_accessible_stack() callback for each step of the
unwinder, requiring redundant work to be performed in the core of the
unwind loop (e.g. disabling preemption around accesses to per-cpu
variables containing stack boundaries). To prevent unwind loops which go
through a stack multiple times, we have to track the set of unwound
stacks, requiring a stack_type enum which needs to cater for all the
stacks of all possible callees. To prevent loops within a stack, we must
track the prior FP values.
This patch reworks the unwinder to minimize the work in the core of the
unwinder, and to remove the need for the stack_type enum. The set of
accessible stacks (and their boundaries) are determined at the start of
the unwind, and the current stack is tracked during the unwind, with
completed stacks removed from the set of accessible stacks. This makes
the boundary checks more accurate (e.g. detecting overlapped frame
records), and removes the need for separate tracking of the prior FP and
visited stacks.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In subsequent patches we'll want to acquire the stack boundaries
ahead-of-time, and we'll need to be able to acquire the relevant
stack_info regardless of whether we have an object the happens to be on
the stack.
This patch replaces the on_XXX_stack() helpers with stackinfo_get_XXX()
helpers, with the caller being responsible for the checking whether an
object is on a relevant stack. For the moment this is moved into the
on_accessible_stack() functions, making these slightly larger;
subsequent patches will remove the on_accessible_stack() functions and
simplify the logic.
The on_irq_stack() and on_task_stack() helpers are kept as these are
used by IRQ entry sequences and stackleak respectively. As they're only
used as predicates, the stack_info pointer parameter is removed in both
cases.
As the on_accessible_stack() functions are always passed a non-NULL info
pointer, these now update info unconditionally. When updating the type
to STACK_TYPE_UNKNOWN, the low/high bounds are also modified, but as
these will not be consumed this should have no adverse affect.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For clarity and ease of maintenance, it would be helpful for all the
stack helpers to be in the same place.
Move the SDEI stack helpers into the stacktrace code where all the other
stack helpers live.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The unwind_next_common() function unwinds a single frame record. There
are other unwind steps (e.g. unwinding through trampolines) which are
handled in the regular kernel unwinder, and in future there may be other
common unwind helpers.
Clarify the purpose of unwind_next_common() by renaming it to
unwind_next_frame_record(). At the same time, add commentary, and delete
the redundant comment at the top of asm/stacktrace/common.h.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently unwind_next_common() takes a pointer to a stack_info which is
only ever used within unwind_next_common().
Make it a local variable and simplify callers.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220901130646.1316937-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Having multiple versions of on_accessible_stack() (one per unwinder)
makes it very hard to reason about what is used where due to the
complexity of the various includes, the forward declarations, and
the reliance on everything being 'inline'.
Instead, move the code back where it should be. Each unwinder
implements:
- on_accessible_stack() as well as the helpers it depends on,
- unwind()/unwind_next(), as they pass on_accessible_stack as
a parameter to unwind_next_common() (which is the only common
code here)
This hardly results in any duplication, and makes it much
easier to reason about the code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20220727142906.1856759-4-maz@kernel.org
|
|
Move unwind() to stacktrace/common.h, and as a result
the kernel unwind_next() to asm/stacktrace.h. This allow
reusing unwind() in the implementation of the nVHE HYP
stack unwinder, later in the series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-6-kaleshsingh@google.com
|
|
The unwinder code is made reusable so that it can be used to
unwind various types of stacks. One usecase is unwinding the
nVHE hyp stack from the host (EL1) in non-protected mode. This
means that the unwinder must be able to translate HYP stack
addresses to kernel addresses.
Add a callback (stack_trace_translate_fp_fn) to allow specifying
the translation function.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-5-kaleshsingh@google.com
|
|
Move common unwind_next logic to stacktrace/common.h. This allows
reusing the code in the implementation the nVHE hypervisor stack
unwinder, later in this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-4-kaleshsingh@google.com
|
|
In order to reuse the arm64 stack unwinding logic for the nVHE
hypervisor stack, move the common code to a shared header
(arch/arm64/include/asm/stacktrace/common.h).
The nVHE hypervisor cannot safely link against kernel code, so we
make use of the shared header to avoid duplicated logic later in
this series.
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-2-kaleshsingh@google.com
|
|
Copy the task argument passed to arch_stack_walk() to unwind_state so that
it can be passed to unwind functions via unwind_state rather than as a
separate argument. The task is a fundamental part of the unwind state.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220617180219.20352-3-madvenka@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
unwind_init() is currently a single function that initializes all of the
unwind state. Split it into the following functions and call them
appropriately:
- unwind_init_from_regs() - initialize from regs passed by caller.
- unwind_init_from_caller() - initialize for the current task
from the caller of arch_stack_walk().
- unwind_init_from_task() - initialize from the saved state of a
task other than the current task. In this case, the other
task must not be running.
This is done for two reasons:
- the different ways of initializing are clear
- specialized code can be added to each initializer in the future.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220617180219.20352-2-madvenka@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use the non-atomic version of set_bit() in arch/arm64/kernel/stacktrace.c,
as there is no concurrent accesses to frame->prev_type.
This speeds up stack trace collection and improves the boot time of
Generic KASAN by 2-5%.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/23dfa36d1cc91e4a1059945b7834eac22fb9854d.1653317461.git.andreyknvl@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Disable KASAN instrumentation of arch/arm64/kernel/stacktrace.c.
This speeds up Generic KASAN by 5-20%.
As a side-effect, KASAN is now unable to detect bugs in the stack trace
collection code. This is taken as an acceptable downside.
Also replace READ_ONCE_NOCHECK() with READ_ONCE() in stacktrace.c.
As the file is now not instrumented, there is no need to use the
NOCHECK version of READ_ONCE().
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/c4c944a2a905e949760fbeb29258185087171708.1653317461.git.andreyknvl@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For historical reasons, the naming of parameters and their types in the
arm64 stacktrace code differs from that used in generic code and other
architectures, even though the types are equivalent.
For consistency and clarity, use the generic names.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rename "struct stackframe" to "struct unwind_state" for consistency and
better naming. Accordingly, rename variable/argument "frame" to "state".
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Rename unwinder functions for consistency and better naming.
- Rename start_backtrace() to unwind_init().
- Rename unwind_frame() to unwind_next().
- Rename walk_stackframe() to unwind().
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that arm64 uses arch_stack_walk() consistently, struct stackframe is
only used within stacktrace.c. To make it easier to read and maintain
this code, it would be nicer if the definition were there too.
Move the definition into stacktrace.c.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comment at the top of stacktrace.c isn't all that helpful, as it's
not associated with the code which inspects the frame record, and the
code example isn't representative of common code generation today.
Delete it.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently, there is a check for a NULL task in unwind_frame(). It is not
needed since all current callers pass a non-NULL task.
There should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kalesh Singh <kaleshsingh@google.com> for the series.
Link: https://lore.kernel.org/r/20220413145910.3060139-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Mark the start_backtrace() as notrace and NOKPROBE_SYMBOL
because this function is called from ftrace and lockdep to
get the caller address via return_address(). The lockdep
is used in kprobes, it should also be NOKPROBE_SYMBOL.
Fixes: b07f3499661c ("arm64: stacktrace: Move start_backtrace() out of the header")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/164301227374.1433152.12808232644267107415.stgit@devnote2
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that open-coded stack unwinds have been converted to
arch_stack_walk(), we no longer need to expose any of unwind_frame(),
walk_stackframe(), or start_backtrace() outside of stacktrace.c.
Make those functions private to stacktrace.c, removing their prototypes
from <asm/stacktrace.h> and marking them static.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable RELIABLE_STACKTRACE and LIVEPATCH on arm64, we need to
substantially rework arm64's unwinding code. As part of this, we want to
minimize the set of unwind interfaces we expose, and avoid open-coding
of unwind logic.
Currently, dump_backtrace() walks the stack of the current task or a
blocked task by calling stact_backtrace() and iterating unwind steps
using unwind_frame(). This can be written more simply in terms of
arch_stack_walk(), considering three distinct cases:
1) When unwinding a blocked task, start_backtrace() is called with the
blocked task's saved PC and FP, and the unwind proceeds immediately
from this point without skipping any entries. This is functionally
equivalent to calling arch_stack_walk() with the blocked task, which
will start with the task's saved PC and FP.
There is no functional change to this case.
2) When unwinding the current task without regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind proceeds immediately without
skipping. This is *almost* functionally equivalent to calling
arch_stack_walk() for the current task, which will start with its
caller (i.e. an offset into dump_backtrace()) as the PC, and the
callers frame record as the next frame.
The only difference being that dump_backtrace() will be reported with
an offset (which is strictly more correct than currently). Otherwise
there is no functional cahnge to this case.
3) When unwinding the current task with regs, start_backtrace() is
called with dump_backtrace() as the PC and __builtin_frame_address(0)
as the next frame, and the unwind is performed silently until the
next frame is the frame pointed to by regs->fp. Reporting starts
from regs->pc and continues from the frame in regs->fp.
Historically, this pre-unwind was necessary to correctly record
return addresses rewritten by the ftrace graph calller, but this is
no longer necessary as these are now recovered using the FP since
commit:
c6d3cd32fd0064af ("arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR")
This pre-unwind is not necessary to recover return addresses
rewritten by kretprobes, which historically were not recovered, and
are now recovered using the FP since commit:
cd9bc2c9258816dc ("arm64: Recover kretprobe modified return address in stacktrace")
Thus, this is functionally equivalent to calling arch_stack_walk()
with the current task and regs, which will start with regs->pc as the
PC and regs->fp as the next frame, without a pre-unwind.
This patch makes dump_backtrace() use arch_stack_walk(). This simplifies
dump_backtrace() and will permit subsequent changes to the unwind code.
Aside from the improved reporting when unwinding current without regs,
there should be no functional change as a result of this patch.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
[Mark: elaborate commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129142849.3056714-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Make arch_stack_walk() available for ARCH_STACKWALK architectures
without it being entangled in STACKTRACE.
Link: https://lore.kernel.org/lkml/20211022152104.356586621@infradead.org/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[Mark: rebase, drop unnecessary arm change]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211129142849.3056714-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When CONFIG_FUNCTION_GRAPH_TRACER is selected and the function graph
tracer is in use, unwind_frame() may erroneously associate a traced
function with an incorrect return address. This can happen when starting
an unwind from a pt_regs, or when unwinding across an exception
boundary.
This can be seen when recording with perf while the function graph
tracer is in use. For example:
| # echo function_graph > /sys/kernel/debug/tracing/current_tracer
| # perf record -g -e raw_syscalls:sys_enter:k /bin/true
| # perf report
... reports the callchain erroneously as:
| el0t_64_sync
| el0t_64_sync_handler
| el0_svc_common.constprop.0
| perf_callchain
| get_perf_callchain
| syscall_trace_enter
| syscall_trace_enter
... whereas when the function graph tracer is not in use, it reports:
| el0t_64_sync
| el0t_64_sync_handler
| el0_svc
| do_el0_svc
| el0_svc_common.constprop.0
| syscall_trace_enter
| syscall_trace_enter
The underlying problem is that ftrace_graph_get_ret_stack() takes an
index offset from the most recent entry added to the fgraph return
stack. We start an unwind at offset 0, and increment the offset each
time we encounter a rewritten return address (i.e. when we see
`return_to_handler`). This is broken in two cases:
1) Between creating a pt_regs and starting the unwind, function calls
may place entries on the stack, leaving an arbitrary offset which we
can only determine by performing a full unwind from the caller of the
unwind code (and relying on none of the unwind code being
instrumented).
This can result in erroneous entries being reported in a backtrace
recorded by perf or kfence when the function graph tracer is in use.
Currently show_regs() is unaffected as dump_backtrace() performs an
initial unwind.
2) When unwinding across an exception boundary (whether continuing an
unwind or starting a new unwind from regs), we currently always skip
the LR of the interrupted context. Where this was live and contained
a rewritten address, we won't consume the corresponding fgraph ret
stack entry, leaving subsequent entries off-by-one.
This can result in erroneous entries being reported in a backtrace
performed by any in-kernel unwinder when that backtrace crosses an
exception boundary, with entries after the boundary being reported
incorrectly. This includes perf, kfence, show_regs(), panic(), etc.
To fix this, we need to be able to uniquely identify each rewritten
return address such that we can map this back to the original return
address. We can use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR to associate
each rewritten return address with a unique location on the stack. As
the return address is passed in the LR (and so is not guaranteed a
unique location in memory), we use the FP upon entry to the function
(i.e. the address of the caller's frame record) as the return address
pointer. Any nested call will have a different FP value as the caller
must create its own frame record and update FP to point to this.
Since ftrace_graph_ret_addr() requires the return address with the PAC
stripped, the stripping of the PAC is moved before the fixup of the
rewritten address. As we would unconditionally strip the PAC, moving
this earlier is not harmful, and we can avoid a redundant strip in the
return address fixup code.
I've tested this with the perf case above, the ftrace selftests, and
a number of ad-hoc unwinder tests. The tests all pass, and I have seen
no unexpected behaviour as a result of this change. I've tested with
pointer authentication under QEMU TCG where magic-sysrq+l correctly
recovers the original return addresses.
Note that this doesn't fix the issue of skipping a live LR at an
exception boundary, which is a more general problem and requires more
substantial rework. Were we to consume the LR in all cases this would
result in warnings where the interrupted context's LR contains
`return_to_handler`, but the FP has been altered, e.g.
| func:
| <--- ftrace entry ---> // logs FP & LR, rewrites LR
| STP FP, LR, [SP, #-16]!
| MOV FP, SP
| <--- INTERRUPT --->
... as ftrace_graph_get_ret_stack() fill not find a matching entry,
triggering the WARN_ON_ONCE() in unwind_frame().
Link: https://lore.kernel.org/r/20211025164925.GB2001@C02TD0UTHF1T.local
Link: https://lore.kernel.org/r/20211027132529.30027-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211029162245.39761-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.
This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list. For this purpose
this adds 'kr_cur' loop cursor to memorize the current kretprobe
instance.
With this fix, now arm64 can enable
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE, and pass the
kprobe self tests.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When the function_graph tracer is in use, arch_stack_walk() may unwind
the stack incorrectly, erroneously reporting itself, missing the final
entry which is being traced, and reporting all traced entries between
these off-by-one from where they should be.
When ftrace hooks a function return, the original return address is
saved to the fgraph ret_stack, and the return address in the LR (or the
function's frame record) is replaced with `return_to_handler`.
When arm64's unwinder encounter frames returning to `return_to_handler`,
it finds the associated original return address from the fgraph ret
stack, assuming the most recent `ret_to_hander` entry on the stack
corresponds to the most recent entry in the fgraph ret stack, and so on.
When arch_stack_walk() is used to dump the current task's stack, it
starts from the caller of arch_stack_walk(). However, arch_stack_walk()
can be traced, and so may push an entry on to the fgraph ret stack,
leaving the fgraph ret stack offset by one from the expected position.
This can be seen when dumping the stack via /proc/self/stack, where
enabling the graph tracer results in an unexpected
`stack_trace_save_tsk` entry at the start of the trace, and `el0_svc`
missing form the end of the trace.
This patch fixes this by marking arch_stack_walk() as notrace, as we do
for all other functions on the path to ftrace_graph_get_ret_stack().
While a few helper functions are not marked notrace, their calls/returns
are balanced, and will have no observable effect when examining the
fgraph ret stack.
It is possible for an exeption boundary to cause a similar offset if the
return address of the interrupted context was in the LR. Fixing those
cases will require some more substantial rework, and is left for
subsequent patches.
Before:
| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xc4/0x140
| [<0>] proc_single_show+0x6c/0x120
| [<0>] seq_read_iter+0x240/0x4e0
| [<0>] seq_read+0xe8/0x140
| [<0>] vfs_read+0xb8/0x1e4
| [<0>] ksys_read+0x74/0x100
| [<0>] __arm64_sys_read+0x28/0x3c
| [<0>] invoke_syscall+0x50/0x120
| [<0>] el0_svc_common.constprop.0+0xc4/0xd4
| [<0>] do_el0_svc+0x30/0x9c
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0t_64_sync_handler+0x1a8/0x1b0
| [<0>] el0t_64_sync+0x198/0x19c
| # echo function_graph > /sys/kernel/tracing/current_tracer
| # cat /proc/self/stack
| [<0>] stack_trace_save_tsk+0xa4/0x110
| [<0>] proc_pid_stack+0xc4/0x140
| [<0>] proc_single_show+0x6c/0x120
| [<0>] seq_read_iter+0x240/0x4e0
| [<0>] seq_read+0xe8/0x140
| [<0>] vfs_read+0xb8/0x1e4
| [<0>] ksys_read+0x74/0x100
| [<0>] __arm64_sys_read+0x28/0x3c
| [<0>] invoke_syscall+0x50/0x120
| [<0>] el0_svc_common.constprop.0+0xc4/0xd4
| [<0>] do_el0_svc+0x30/0x9c
| [<0>] el0t_64_sync_handler+0x1a8/0x1b0
| [<0>] el0t_64_sync+0x198/0x19c
After:
| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xc4/0x140
| [<0>] proc_single_show+0x6c/0x120
| [<0>] seq_read_iter+0x240/0x4e0
| [<0>] seq_read+0xe8/0x140
| [<0>] vfs_read+0xb8/0x1e4
| [<0>] ksys_read+0x74/0x100
| [<0>] __arm64_sys_read+0x28/0x3c
| [<0>] invoke_syscall+0x50/0x120
| [<0>] el0_svc_common.constprop.0+0xc4/0xd4
| [<0>] do_el0_svc+0x30/0x9c
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0t_64_sync_handler+0x1a8/0x1b0
| [<0>] el0t_64_sync+0x198/0x19c
| # echo function_graph > /sys/kernel/tracing/current_tracer
| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xc4/0x140
| [<0>] proc_single_show+0x6c/0x120
| [<0>] seq_read_iter+0x240/0x4e0
| [<0>] seq_read+0xe8/0x140
| [<0>] vfs_read+0xb8/0x1e4
| [<0>] ksys_read+0x74/0x100
| [<0>] __arm64_sys_read+0x28/0x3c
| [<0>] invoke_syscall+0x50/0x120
| [<0>] el0_svc_common.constprop.0+0xc4/0xd4
| [<0>] do_el0_svc+0x30/0x9c
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0t_64_sync_handler+0x1a8/0x1b0
| [<0>] el0t_64_sync+0x198/0x19c
Cc: <stable@vger.kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210802164845.45506-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Let's use the new printk format to print the stacktrace entry when
printing a backtrace to the kernel logs. This will include any module's
build ID[1] in it so that offline/crash debugging can easily locate the
debuginfo for a module via something like debuginfod[2].
Link: https://lkml.kernel.org/r/20210511003845.2429846-7-swboyd@chromium.org
Link: https://fedoraproject.org/wiki/Releases/FeatureBuildId [1]
Link: https://sourceware.org/elfutils/Debuginfod.html [2]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The AAPCS places no requirements on the alignment of the frame
record. In theory it could be placed anywhere, although it seems
sensible to require it to be aligned to 8 bytes. With an upcoming
enhancement to tag-based KASAN Clang will begin creating frame records
located at an address that is only aligned to 8 bytes. Accommodate
such frame records in the stack unwinding code.
As pointed out by Mark Rutland, the userspace stack unwinding code
has the same problem, so fix it there as well.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ia22c375230e67ca055e9e4bb639383567f7ad268
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210526174927.2477847-2-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
unwind_frame() was previously implicitly checking that the frame
record is in bounds of the stack by enforcing that FP is both aligned
to 16 and in bounds of the stack. Once the FP alignment requirement
is relaxed to 8 this will not be sufficient because it does not
account for the case where FP points to 8 bytes before the end of the
stack.
Make the check explicit by changing the on_*stack functions to take a
size argument and adjusting the callers to pass the appropriate sizes.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ib7a3eb3eea41b0687ffaba045ceb2012d077d8b4
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210526174927.2477847-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Reliable stacktracing requires that we identify when a stacktrace is
terminated early. We can do this by ensuring all tasks have a final
frame record at a known location on their task stack, and checking
that this is the final frame record in the chain.
We'd like to use task_pt_regs(task)->stackframe as the final frame
record, as this is already setup upon exception entry from EL0. For
kernel tasks we need to consistently reserve the pt_regs and point x29
at this, which we can do with small changes to __primary_switched,
__secondary_switched, and copy_process().
Since the final frame record must be at a specific location, we must
create the final frame record in __primary_switched and
__secondary_switched rather than leaving this to start_kernel and
secondary_start_kernel. Thus, __primary_switched and
__secondary_switched will now show up in stacktraces for the idle tasks.
Since the final frame record is now identified by its location rather
than by its contents, we identify it at the start of unwind_frame(),
before we read any values from it.
External debuggers may terminate the stack trace when FP == 0. In the
pt_regs->stackframe, the PC is 0 as well. So, stack traces taken in the
debugger may print an extra record 0x0 at the end. While this is not
pretty, this does not do any harm. This is a small price to pay for
having reliable stack trace termination in the kernel. That said, gdb
does not show the extra record probably because it uses DWARF and not
frame pointers for stack traces.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
[Mark: rebase, use ASM_BUG(), update comments, update commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210510110026.18061-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"A mix of fixes and clean-ups that turned up too late for the first
pull request:
- Restore terminal stack frame records. Their previous removal caused
traces which cross secondary_start_kernel to terminate one entry
too late, with a spurious "0" entry.
- Fix boot warning with pseudo-NMI due to the way we manipulate the
PMR register.
- ACPI fixes: avoid corruption of interrupt mappings on watchdog
probe failure (GTDT), prevent unregistering of GIC SGIs.
- Force SPARSEMEM_VMEMMAP as the only memory model, it saves with
having to test all the other combinations.
- Documentation fixes and updates: tagged address ABI exceptions on
brk/mmap/mremap(), event stream frequency, update booting
requirements on the configuration of traps"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Update the stale comment
arm64: Fix the documented event stream frequency
arm64: entry: always set GIC_PRIO_PSR_I_SET during entry
arm64: Explicitly document boot requirements for SVE
arm64: Explicitly require that FPSIMD instructions do not trap
arm64: Relax booting requirements for configuration of traps
arm64: cpufeatures: use min and max
arm64: stacktrace: restore terminal records
arm64/vdso: Discard .note.gnu.property sections in vDSO
arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions
psci: Remove unneeded semicolon
ACPI: irq: Prevent unregistering of GIC SGIs
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
arm64: Show three registers per line
arm64: remove HAVE_DEBUG_BUGVERBOSE
arm64: alternative: simplify passing alt_region
arm64: Force SPARSEMEM_VMEMMAP as the only memory management model
arm64: vdso32: drop -no-integrated-as flag
|
|
We removed the terminal frame records in commit:
6106e1112cc69a36 ("arm64: remove EL0 exception frame record")
... on the assumption that as we no longer used them to find the pt_regs
at exception boundaries, they were no longer necessary.
However, Leo reports that as an unintended side-effect, this causes
traces which cross secondary_start_kernel to terminate one entry too
late, with a spurious "0" entry.
There are a few ways we could sovle this, but as we're planning to use
terminal records for RELIABLE_STACKTRACE, let's revert the logic change
for now, keeping the update comments and accounting for the changes in
commit:
3c02600144bdb0a1 ("arm64: stacktrace: Report when we reach the end of the stack")
This is effectively a partial revert of commit:
6106e1112cc69a36 ("arm64: remove EL0 exception frame record")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 6106e1112cc6 ("arm64: remove EL0 exception frame record")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Madhavan T. Venkataraman" <madvenka@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210429104813.GA33550@C02TD0UTHF1T.local
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
|
|
Currently start_backtrace() is a static inline function in the header.
Since it really shouldn't be sufficiently performance critical that we
actually need to have it inlined move it into a C file, this will save
anyone else scratching their head about why it is defined in the header.
As far as I can see it's only there because it was factored out of the
various callers.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210319174022.33051-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We recently converted arm64 to use arch_stack_walk() in commit:
5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK")
The core stacktrace code expects that (when tracing the current task)
arch_stack_walk() starts a trace at its caller, and does not include
itself in the trace. However, arm64's arch_stack_walk() includes itself,
and so traces include one more entry than callers expect. The core
stacktrace code which calls arch_stack_walk() tries to skip a number of
entries to prevent itself appearing in a trace, and the additional entry
prevents skipping one of the core stacktrace functions, leaving this in
the trace unexpectedly.
We can fix this by having arm64's arch_stack_walk() begin the trace with
its caller. The first value returned by the trace will be
__builtin_return_address(0), i.e. the caller of arch_stack_walk(). The
first frame record to be unwound will be __builtin_frame_address(1),
i.e. the caller's frame record. To prevent surprises, arch_stack_walk()
is also marked noinline.
While __builtin_frame_address(1) is not safe in portable code, local GCC
developers have confirmed that it is safe on arm64. To find the caller's
frame record, the builtin can safely dereference the current function's
frame record or (in theory) could stash the original FP into another GPR
at function entry time, neither of which are problematic.
Prior to this patch, the tracing code would unexpectedly show up in
traces of the current task, e.g.
| # cat /proc/self/stack
| [<0>] stack_trace_save_tsk+0x98/0x100
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180
After this patch, the tracing code will not show up in such traces:
| # cat /proc/self/stack
| [<0>] proc_pid_stack+0xb4/0x130
| [<0>] proc_single_show+0x60/0x110
| [<0>] seq_read_iter+0x230/0x4d0
| [<0>] seq_read+0xdc/0x130
| [<0>] vfs_read+0xac/0x1e0
| [<0>] ksys_read+0x6c/0xfc
| [<0>] __arm64_sys_read+0x20/0x30
| [<0>] el0_svc_common.constprop.0+0x60/0x120
| [<0>] do_el0_svc+0x24/0x90
| [<0>] el0_svc+0x2c/0x54
| [<0>] el0_sync_handler+0x1a4/0x1b0
| [<0>] el0_sync+0x170/0x180
Erring on the side of caution, I've given this a spin with a bunch of
toolchains, verifying the output of /proc/self/stack and checking that
the assembly looked sound. For GCC (where we require version 5.1.0 or
later) I tested with the kernel.org crosstool binares for versions
5.5.0, 6.4.0, 6.5.0, 7.3.0, 7.5.0, 8.1.0, 8.3.0, 8.4.0, 9.2.0, and
10.1.0. For clang (where we require version 10.0.1 or later) I tested
with the llvm.org binary releases of 11.0.0, and 11.0.1.
Fixes: 5fc57df2f6fd ("arm64: stacktrace: Convert to ARCH_STACKWALK")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jun <chenjun102@huawei.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> # 5.10.x
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319184106.5688-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the arm64 unwinder code returns -EINVAL whenever it can't find
the next stack frame, not distinguishing between cases where the stack has
been corrupted or is otherwise in a state it shouldn't be and cases
where we have reached the end of the stack. At the minute none of the
callers care what error code is returned but this will be important for
reliable stack trace which needs to be sure that the stack is intact.
Change to return -ENOENT in the case where we reach the bottom of the
stack. The error codes from this function are only used in kernel, this
particular code is chosen as we are indicating that we know there is no
frame there.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210224165037.24138-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When entering an exception from EL0, the entry code creates a synthetic
frame record with a NULL PC. This was used by the code introduced in
commit:
7326749801396105 ("arm64: unwind: reference pt_regs via embedded stack frame")
... to discover exception entries on the stack and dump the associated
pt_regs. Since the NULL PC was undesirable for the stacktrace, we added
a special case to unwind_frame() to prevent the NULL PC from being
logged.
Since commit:
a25ffd3a6302a678 ("arm64: traps: Don't print stack or raw PC/LR values in backtraces")
... we no longer try to dump the pt_regs as part of a stacktrace, and
hence no longer need the synthetic exception record.
This patch removes the synthetic exception record and the associated
special case in unwind_frame(). Instead, EL0 exceptions set the FP to
NULL, as is the case for other terminal records (e.g. when a kernel
thread starts). The synthetic record for exceptions from EL1 is
retrained as this has useful unwind information for the interrupted
context.
To make the terminal case a bit clearer, an explicit check is added to
the start of unwind_frame(). This would otherwise be caught implicitly
by the on_accessible_stack() checks.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210113173155.43063-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the code for displaying a stack trace on the console is located
in traps.c rather than stacktrace.c, using the unwinding code that is in
stacktrace.c. This can be confusing and make the code hard to find since
such output is often referred to as a stack trace which might mislead the
unwary. Due to this and since traps.c doesn't interact with this code
except for via the public interfaces move the code to stacktrace.c to
make it easier to find.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200921122341.11280-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Historically architectures have had duplicated code in their stack trace
implementations for filtering what gets traced. In order to avoid this
duplication some generic code has been provided using a new interface
arch_stack_walk(), enabled by selecting ARCH_STACKWALK in Kconfig, which
factors all this out into the generic stack trace code. Convert arm64
to use this common infrastructure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200914153409.25097-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As with the generic arch_stack_walk() code the arm64 stack walk code takes
a callback that is called per stack frame. Currently the arm64 code always
passes a struct stackframe to the callback and the generic code just passes
the pc, however none of the users ever reference anything in the struct
other than the pc value. The arm64 code also uses a return type of int
while the generic code uses a return type of bool though in both cases the
return value is a boolean value and the sense is inverted between the two.
In order to reduce code duplication when arm64 is converted to use
arch_stack_walk() change the signature and return sense of the arm64
specific callback to match that of the generic code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200914153409.25097-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Due to refactoring way back in bb53c820c5b0f1 ("arm64: stacktrace: avoid
listing stacktrace functions in stacktrace") the EXPORT_SYMBOL_GPL() for
save_stack_trace_tsk() is at the end of __save_stack_trace() rather than
the function it exports. Move it to the expected location.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200710182402.50473-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When we enable pointer authentication in the kernel, LR values saved to
the stack will have a PAC which we must strip in order to retrieve the
real return address.
Strip PACs when unwinding the stack in order to account for this.
When function graph tracer is used with patchable-function-entry then
return_to_handler will also have pac bits so strip it too.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[Amit: Re-position ptrauth_strip_insn_pac, comment]
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
