Age | Commit message (Collapse) | Author | Files | Lines |
|
Commit 2d071968a405 ("arm64: compat: Remove 32-bit sigreturn code
from the vDSO") removed all VDSO_* symbols in the compat vDSO. As a
result, vdso32-offsets.h is now empty and therefore unused. Time to
remove it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20240129154748.1727759-1-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
|
|
'make vdso_install' renames arch/arm64/kernel/vdso32/vdso.so.dbg to
vdso32.so during installation, which allows 64-bit and 32-bit vdso
files to be installed in the same directory.
However, arm64 is the only architecture that requires this renaming.
To simplify the vdso_install logic, rename the in-tree vdso file so
its base name matches the installed file name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20231117125620.1058300-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
After commit 42874e4eb35b ("arch: vdso: consolidate gettime
prototypes"), there are a couple of errors when building the 32-bit
compat vDSO for arm64:
arch/arm64/kernel/vdso32/vgettimeofday.c:10:5: error: conflicting types for '__vdso_clock_gettime'; have 'int(clockid_t, struct old_timespec32 *)' {aka 'int(int, struct old_timespec32 *)'}
10 | int __vdso_clock_gettime(clockid_t clock,
| ^~~~~~~~~~~~~~~~~~~~
In file included from arch/arm64/kernel/vdso32/vgettimeofday.c:8:
include/vdso/gettime.h:16:5: note: previous declaration of '__vdso_clock_gettime' with type 'int(clockid_t, struct __kernel_timespec *)' {aka 'int(int, struct __kernel_timespec *)'}
16 | int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
| ^~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/vdso32/vgettimeofday.c:28:5: error: conflicting types for '__vdso_clock_getres'; have 'int(clockid_t, struct old_timespec32 *)' {aka 'int(int, struct old_timespec32 *)'}
28 | int __vdso_clock_getres(clockid_t clock_id,
| ^~~~~~~~~~~~~~~~~~~
include/vdso/gettime.h:15:5: note: previous declaration of '__vdso_clock_getres' with type 'int(clockid_t, struct __kernel_timespec *)' {aka 'int(int, struct __kernel_timespec *)'}
15 | int __vdso_clock_getres(clockid_t clock, struct __kernel_timespec *res);
| ^~~~~~~~~~~~~~~~~~~
The type of the second parameter in __vdso_clock_getres() and
__vdso_clock_gettime() changes based on whether compiling for 32-bit vs.
64-bit, which is controlled by CONFIG_64BIT or the preprocessor macro
BUILD_VDSO32_64, which denotes a 32-bit vDSO is being built for a 64-bit
architecture. Since this situation is the latter case, define
BUILD_VDSO32_64 before the inclusion of include/vdso/gettime.h to clear
up the warning
Fixes: 42874e4eb35b ("arch: vdso: consolidate gettime prototypes")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYtV6X=c3JVTTAX89_=wc+uqLpzggnsbGSx-98m_5yd5yw@mail.gmail.com/
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/ZWCRWArzbTYUjvon@finisterre.sirena.org.uk/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The VDSO functions are defined as globals in the kernel sources but intended
to be called from userspace, so there is no need to declare them in a kernel
side header.
Without a prototype, this now causes warnings such as
arch/mips/vdso/vgettimeofday.c:14:5: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:28:5: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:36:5: error: no previous prototype for '__vdso_clock_getres' [-Werror=missing-prototypes]
arch/mips/vdso/vgettimeofday.c:42:5: error: no previous prototype for '__vdso_clock_gettime64' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:254:1: error: no previous prototype for '__vdso_clock_gettime' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:282:1: error: no previous prototype for '__vdso_clock_gettime_stick' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:307:1: error: no previous prototype for '__vdso_gettimeofday' [-Werror=missing-prototypes]
arch/sparc/vdso/vclock_gettime.c:343:1: error: no previous prototype for '__vdso_gettimeofday_stick' [-Werror=missing-prototypes]
Most architectures have already added workarounds for these by adding
declarations somewhere, but since these are all compatible, we should
really just have one copy, with an #ifdef check for the 32-bit vs
64-bit variant and use that everywhere.
Unfortunately, the sparc an um versions are currently incompatible
since they never added support for __vdso_clock_gettime64() in 32-bit
userland. For the moment, I'm leaving this one out, as I can't
easily test it and it requires a larger rework.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently, there is no standard implementation for vdso_install,
leading to various issues:
1. Code duplication
Many architectures duplicate similar code just for copying files
to the install destination.
Some architectures (arm, sparc, x86) create build-id symlinks,
introducing more code duplication.
2. Unintended updates of in-tree build artifacts
The vdso_install rule depends on the vdso files to install.
It may update in-tree build artifacts. This can be problematic,
as explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").
3. Broken code in some architectures
Makefile code is often copied from one architecture to another
without proper adaptation.
'make vdso_install' for parisc does not work.
'make vdso_install' for s390 installs vdso64, but not vdso32.
To address these problems, this commit introduces a generic vdso_install
rule.
Architectures that support vdso_install need to define vdso-install-y
in arch/*/Makefile. vdso-install-y lists the files to install.
For example, arch/x86/Makefile looks like this:
vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg
vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg
vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg
vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg
These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix,
if exists, stripped away.
vdso-install-y can optionally take the second field after the colon
separator. This is needed because some architectures install a vdso
file as a different base name.
The following is a snippet from arch/arm64/Makefile.
vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so
This will rename vdso.so.dbg to vdso32.so during installation. If such
architectures change their implementation so that the base names match,
this workaround will go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
With the advent on scope-based resource management it comes really
tedious to abide by the contraints of -Wdeclaration-after-statement.
It will still be recommeneded to place declarations at the start of a
scope where possible, but it will no longer be enforced.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAHk-%3Dwi-RyoUhbChiVaJZoZXheAwnJ7OO%3DGxe85BkPAd93TwDA%40mail.gmail.com
|
|
The actual intention is that no dynamic relocation exists in the VDSO. For
this the VDSO build validates that the resulting .so file does not have any
relocations which are specified via $(ARCH_REL_TYPE_ABS) per architecture,
which is fragile as e.g. ARM64 lacks an entry for R_AARCH64_RELATIVE. Aside
of that ARCH_REL_TYPE_ABS is a misnomer as it checks for relative
relocations too.
However, some GNU ld ports produce unneeded R_*_NONE relocation entries. If
a port fails to determine the exact .rel[a].dyn size, the trailing zeros
become R_*_NONE relocations. E.g. ld's powerpc port recently fixed
https://sourceware.org/bugzilla/show_bug.cgi?id=29540). R_*_NONE are
generally a no-op in the dynamic loaders. So just ignore them.
Remove the ARCH_REL_TYPE_ABS defines and just validate that the resulting
.so file does not contain any R_* relocation entries except R_*_NONE.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for aarch64
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for vDSO, aarch64
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230310190750.3323802-1-maskray@google.com
|
|
Andrew Cooper suggested upgrading the orphan section warning to a hard link
error. However Nathan Chancellor said outright turning the warning into an
error with no escape hatch might be too aggressive, as we have had these
warnings triggered by new compiler generated sections, and suggested turning
orphan sections into an error only if CONFIG_WERROR is set. Kees Cook echoed
and emphasized that the mandate from Linus is that we should avoid breaking
builds. It wrecks bisection, it causes problems across compiler versions, etc.
Thus upgrade the orphan section warning to a hard link error only if
CONFIG_WERROR is set.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Xin Li <xin3.li@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221025073023.16137-2-xin3.li@intel.com
|
|
When building the 32-bit vDSO with LLVM 15 and CONFIG_DEBUG_INFO, there
are the following orphan section warnings:
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_abbrev) is being placed in '.debug_abbrev'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_info) is being placed in '.debug_info'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_str_offsets) is being placed in '.debug_str_offsets'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_str) is being placed in '.debug_str'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_addr) is being placed in '.debug_addr'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_line) is being placed in '.debug_line'
ld.lld: warning: arch/arm64/kernel/vdso32/note.o:(.debug_line_str) is being placed in '.debug_line_str'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_loclists) is being placed in '.debug_loclists'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_abbrev) is being placed in '.debug_abbrev'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_info) is being placed in '.debug_info'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_rnglists) is being placed in '.debug_rnglists'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_str_offsets) is being placed in '.debug_str_offsets'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_str) is being placed in '.debug_str'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_addr) is being placed in '.debug_addr'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_frame) is being placed in '.debug_frame'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_line) is being placed in '.debug_line'
ld.lld: warning: arch/arm64/kernel/vdso32/vgettimeofday.o:(.debug_line_str) is being placed in '.debug_line_str'
These are DWARF5 sections, as that is the implicit default version for
clang-14 and newer when just '-g' is used. All DWARF sections are
handled by the DWARF_DEBUG macro from include/asm-generic/vmlinux.lds.h
so use that macro here to fix the warnings regardless of DWARF version.
Fixes: 9d4775b332e1 ("arm64: vdso32: enable orphan handling for VDSO")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220630153121.1317045-3-nathan@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When building the 32-bit vDSO after commit 5c4fb60816ea ("arm64: vdso32:
add ARM.exidx* sections"), ld.lld 11 fails to link:
ld.lld: error: could not allocate headers
ld.lld: error: unable to place section .text at file offset [0x2A0, 0xBB1]; check your linker script for overflows
ld.lld: error: unable to place section .comment at file offset [0xBB2, 0xC8A]; check your linker script for overflows
ld.lld: error: unable to place section .symtab at file offset [0xC8C, 0xE0B]; check your linker script for overflows
ld.lld: error: unable to place section .strtab at file offset [0xE0C, 0xF1C]; check your linker script for overflows
ld.lld: error: unable to place section .shstrtab at file offset [0xF1D, 0xFAA]; check your linker script for overflows
ld.lld: error: section .ARM.exidx file range overlaps with .hash
>>> .ARM.exidx range is [0x90, 0xCF]
>>> .hash range is [0xB4, 0xE3]
ld.lld: error: section .hash file range overlaps with .ARM.attributes
>>> .hash range is [0xB4, 0xE3]
>>> .ARM.attributes range is [0xD0, 0x10B]
ld.lld: error: section .ARM.attributes file range overlaps with .dynsym
>>> .ARM.attributes range is [0xD0, 0x10B]
>>> .dynsym range is [0xE4, 0x133]
ld.lld: error: section .ARM.exidx virtual address range overlaps with .hash
>>> .ARM.exidx range is [0x90, 0xCF]
>>> .hash range is [0xB4, 0xE3]
ld.lld: error: section .ARM.exidx load address range overlaps with .hash
>>> .ARM.exidx range is [0x90, 0xCF]
>>> .hash range is [0xB4, 0xE3]
This was fixed in ld.lld 12 with a change to match GNU ld's semantics of
placing non-SHF_ALLOC sections after SHF_ALLOC sections.
To workaround this issue, move the .ARM.exidx section before the
.comment, .symtab, .strtab, and .shstrtab sections (ELF_DETAILS) so that
those sections remain contiguous with the .ARM.attributes section.
Fixes: 5c4fb60816ea ("arm64: vdso32: add ARM.exidx* sections")
Link: https://github.com/llvm/llvm-project/commit/ec29538af2e0886a65f479d6a533956a1c478132
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220630153121.1317045-2-nathan@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The vDSO will not contain absolute relocations, so place these
sections in .rodata.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/00abb0c5-6360-0004-353f-e7a88b3bd22c@arm.com/
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220628151307.35561-3-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These show up when building with clang+lld.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220628151307.35561-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Like vmlinux, enable orphan-handling for the compat VDSO32. This can catch
subtle errors that might arise from unexpected sections being included.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220510095834.32394-5-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use macros from vmlinux.lds.h to explicitly name sections that are included
in the compat VDSO32 output.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220510095834.32394-4-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is currently no dependency for vdso*-wrap.S on vdso*.so, which means that
you can get a build that uses a stale vdso*-wrap.o.
In commit a5b8ca97fbf8, the file that includes the vdso.so was moved and renamed
from arch/arm64/kernel/vdso/vdso.S to arch/arm64/kernel/vdso-wrap.S, when this
happened the Makefile was not updated to force the dependcy on vdso.so.
Fixes: a5b8ca97fbf8 ("arm64: do not descend to vdso directories twice")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220510102721.50811-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During a patch discussion, Linus brought up the option of changing
the C standard version from gnu89 to gnu99, which allows using variable
declaration inside of a for() loop. While the C99, C11 and later standards
introduce many other features, most of these are already available in
gnu89 as GNU extensions as well.
An earlier attempt to do this when gcc-5 started defaulting to
-std=gnu11 failed because at the time that caused warnings about
designated initializers with older compilers. Now that gcc-5.1 is
the minimum compiler version used for building kernels, that is no
longer a concern. Similarly, the behavior of 'inline' functions changes
between gnu89 using gnu_inline behavior and gnu11 using standard c99+
behavior, but this was taken care of by defining 'inline' to include
__attribute__((gnu_inline)) in order to allow building with clang a
while ago.
Nathan Chancellor reported a new -Wdeclaration-after-statement
warning that appears in a system header on arm, this still needs a
workaround.
The differences between gnu99, gnu11, gnu1x and gnu17 are fairly
minimal and mainly impact warnings at the -Wpedantic level that the
kernel never enables. Between these, gnu11 is the newest version
that is supported by all supported compiler versions, though it is
only the default on gcc-5, while all other supported versions of
gcc or clang default to gnu1x/gnu17.
Link: https://lore.kernel.org/lkml/CAHk-=wiyCH7xeHcmiFJ-YgXUy2Jaj7pnkdKpcovt8fYbVFW3TA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1603
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: David Sterba <dsterba@suse.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
the use of additional C11 features such as for-loop initial declarations.
One contentious aspect of C99 is that it permits mixed declarations and
code, and for now at least, it seems preferable to enforce that
declarations must come first.
These warnings were already enabled in the kernel itself, but not
for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
a separate set of CFLAGS.
This patch fixes an existing violation in modpost.c, which is not
reported because of the missing flag in KBUILD_USERCFLAGS:
| scripts/mod/modpost.c: In function ‘match’:
| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
| 837 | const char *endp = p + strlen(p) - 1;
| | ^~~~~
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[arnd: don't add a duplicate flag to the default set, update changelog]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used as a linker driver.
Since commit 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC)
to link VDSO"), $(LD) is directly used, hence -nostdlib is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20211107161802.323125-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Similar to
commit 231ad7f409f1 ("Makefile: infer --target from ARCH for CC=clang")
There really is no point in setting --target based on
$CROSS_COMPILE_COMPAT for clang when the integrated assembler is being
used, since
commit ef94340583ee ("arm64: vdso32: drop -no-integrated-as flag").
Allows COMPAT_VDSO to be selected without setting $CROSS_COMPILE_COMPAT
when using clang and lld together.
Before:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
$
After:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
$ ARCH=arm64 make -j72 LLVM=1 defconfig
$ grep CONFIG_COMPAT_VDSO .config
CONFIG_COMPAT_VDSO=y
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20211019223646.1146945-5-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When running the following command without arm-linux-gnueabi-gcc in
one's $PATH, the following warning is observed:
$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper
make[1]: arm-linux-gnueabi-gcc: No such file or directory
This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG
is not set, and we end up eagerly evaluating various variables that try
to invoke CC_COMPAT.
This is a similar problem to what was observed in
commit dc960bfeedb0 ("h8300: suppress error messages for 'make clean'")
Reported-by: Lucas Henneman <henneman@google.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-4-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As Arnd points out:
gcc-4.8 already supported -march=armv8, and we require gcc-5.1 now, so
both this #if/#else construct and the corresponding
"cc32-option,-march=armv8-a" check should be obsolete now.
Link: https://lore.kernel.org/lkml/CAK8P3a3UBEJ0Py2ycz=rHfgog8g3mCOeQOwO0Gmp-iz6Uxkapg@mail.gmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-3-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Binutils added support for this instruction in commit
e797f7e0b2bedc9328d4a9a0ebc63ca7a2dbbebc which shipped in 2.24 (just
missing the 2.23 release) but was cherry-picked into 2.23 in commit
27a50d6755bae906bc73b4ec1a8b448467f0bea1. Thanks to Christian and Simon
for helping me with the patch archaeology.
According to Documentation/process/changes.rst, the minimum supported
version of binutils is 2.23. Since all supported versions of GAS support
this instruction, drop the assembler invocation, preprocessor
flags/guards, and the cross assembler macro that's now unused.
This also avoids a recursive self reference in a follow up cleanup
patch.
Cc: Christian Biesinger <cbiesinger@google.com>
Cc: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-2-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Clang can assemble these files just fine; this is a relic from the top
level Makefile conditionally adding this. We no longer need --prefix,
--gcc-toolchain, or -Qunused-arguments flags either with this change, so
remove those too.
To test building:
$ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make LLVM=1 LLVM_IAS=1 \
defconfig arch/arm64/kernel/vdso32/
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210420174427.230228-1-ndesaulniers@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arm64 descends into each vdso directory twice; first in vdso_prepare,
second during the ordinary build process.
PPC mimicked it and uncovered a problem [1]. In the first descend,
Kbuild directly visits the vdso directories, therefore it does not
inherit subdir-ccflags-y from upper directories.
This means the command line parameters may differ between the two.
If it happens, the offset values in the generated headers might be
different from real offsets of vdso.so in the kernel.
This potential danger should be avoided. The vdso directories are
built in the vdso_prepare stage, so the second descend is unneeded.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNARAkJ3_-4gX0VA2UkapbOftuzfSTVMBbgbw=HD8n7N+7w@mail.gmail.com/T/#ma10dcb961fda13f36d42d58fa6cb2da988b7e73a
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20201218024540.1102650-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When building with LTO, there is an increased risk of the compiler
converting an address dependency headed by a READ_ONCE() invocation
into a control dependency and consequently allowing for harmful
reordering by the CPU.
Ensure that such transformations are harmless by overriding the generic
READ_ONCE() definition with one that provides acquire semantics when
building with LTO.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As it stands now, the vdso32 Makefile hardcodes the linker to ld.bfd
using -fuse-ld=bfd with $(CC). This was taken from the arm vDSO
Makefile, as the comment notes, done in commit d2b30cd4b722 ("ARM:
8384/1: VDSO: force use of BFD linker").
Commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to
link VDSO") changed that Makefile to use $(LD) directly instead of
through $(CC), which matches how the rest of the kernel operates. Since
then, LD=ld.lld means that the arm vDSO will be linked with ld.lld,
which has shown no problems so far.
Allow ld.lld to link this vDSO as we do the regular arm vDSO. To do
this, we need to do a few things:
* Add a LD_COMPAT variable, which defaults to $(CROSS_COMPILE_COMPAT)ld
with gcc and $(LD) if LLVM is 1, which will be ld.lld, or
$(CROSS_COMPILE_COMPAT)ld if not, which matches the logic of the main
Makefile. It is overrideable for further customization and avoiding
breakage.
* Eliminate cc32-ldoption, which matches commit 055efab3120b ("kbuild:
drop support for cc-ldoption").
With those, we can use $(LD_COMPAT) in cmd_ldvdso and change the flags
from compiler linker flags to linker flags directly. We eliminate
-mfloat-abi=soft because it is not handled by the linker.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1033
Link: https://lore.kernel.org/r/20201020011406.1818918-1-natechancellor@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ld's --build-id defaults to "sha1" style, while lld defaults to "fast".
The build IDs are very different between the two, which may confuse
programs that reference them.
Signed-off-by: Bill Wendling <morbo@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The minimal compiler versions, GCC 4.9 and Clang 10 support this flag.
Here is the godbolt:
https://godbolt.org/z/xvjcMa
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
|
|
The minimal compiler versions, GCC 4.9 and Clang 10 support this flag.
Here is the godbolt:
https://godbolt.org/z/odq8h9
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
|
|
The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
|
|
Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
Allocate the time namespace page among VVAR pages. Provide
__arch_get_timens_vdso_data() helper for VDSO code to get the
code-relative position of VVARs on that special page.
If a task belongs to a time namespace then the VVAR page which contains
the system wide VDSO data is replaced with a namespace specific page
which has the same layout as the VVAR page. That page has vdso_data->seq
set to 1 to enforce the slow path and vdso_data->clock_mode set to
VCLOCK_TIMENS to enforce the time namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the VDSO data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
The time-namespace page isn't allocated on !CONFIG_TIME_NAMESPACE, but
vma is the same size, which simplifies criu/vdso migration between
different kernel configs.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200624083321.144975-4-avagin@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
[1]: https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90
[2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The sigreturn code in the compat vDSO is unused. Remove it.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow the compat vdso (32b) to be compiled as either THUMB2 (default) or
ARM.
For THUMB2, the register r7 is reserved for the frame pointer, but
code in arch/arm64/include/asm/vdso/compat_gettimeofday.h
uses r7. Explicitly set -fomit-frame-pointer, since unwinding through
interworked THUMB2 and ARM is unreliable anyways. See also how
CONFIG_UNWINDER_FRAME_POINTER cannot be selected for
CONFIG_THUMB2_KERNEL for ARCH=arm.
This also helps toolchains that differ in their implicit value if the
choice of -f{no-}omit-frame-pointer is left unspecified, to not error on
the use of r7.
2019 Q4 ARM AAPCS seeks to standardize the use of r11 as the reserved
frame pointer register, but no production compiler that can compile the
Linux kernel currently implements this. We're actively discussing such
a transition with ARM toolchain developers currently.
Reported-by: Luis Lozano <llozano@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Manoj Gupta <manojgupta@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Stephen Boyd <swboyd@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Link: https://static.docs.arm.com/ihi0042/i/aapcs32.pdf
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1084372
Link: https://lore.kernel.org/r/20200608205711.109418-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Daniel reports that the .cfi_startproc is misplaced for the sigreturn
trampoline, which causes LLVM's unwinder to misbehave:
| I run into this with LLVM’s unwinder.
| This combination was always broken.
This prompted Dave to question our use of CFI directives more generally,
and I ended up going down a rabbit hole trying to figure out how this
very poorly documented stuff gets used.
Move the CFI directives so that the "mysterious NOP" is included in
the .cfi_{start,end}proc block and add a bunch of comments so that I
can save myself another headache in future.
Cc: Tamas Zsoldos <tamas.zsoldos@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Reported-by: Daniel Kiss <daniel.kiss@arm.com>
Tested-by: Daniel Kiss <daniel.kiss@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For better or worse, GDB relies on the exact instruction sequence in the
VDSO sigreturn trampoline in order to unwind from signals correctly.
Commit c91db232da48 ("arm64: vdso: Convert to modern assembler annotations")
unfortunately added a BTI C instruction to the start of __kernel_rt_sigreturn,
which breaks this check. Thankfully, it's also not required, since the
trampoline is called from a RET instruction when returning from the signal
handler
Remove the unnecessary BTI C instruction from __kernel_rt_sigreturn,
and do the same for the 32-bit VDSO as well for good measure.
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Tamas Zsoldos <tamas.zsoldos@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: c91db232da48 ("arm64: vdso: Convert to modern assembler annotations")
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable Clang Compilation for the vdso32 library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-27-vincenzo.frascino@arm.com
|
|
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the vdso32 implementation to include common headers.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-22-vincenzo.frascino@arm.com
|
|
The compat vdso library had some checks that are not anymore relevant.
Remove the unused code from the compat vDSO library.
Note: This patch is preparatory for a future one that will introduce
asm/vdso/processor.h on arm64.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20200317122220.30393-19-vincenzo.frascino@arm.com
Link: https://lkml.kernel.org/r/20200320145351.32292-19-vincenzo.frascino@arm.com
|
|
In an effort to clarify and simplify the annotation of assembly
functions new macros have been introduced. These replace ENTRY and
ENDPROC with two different annotations for normal functions and those
with unusual calling conventions. Use these for the compat VDSO,
allowing us to drop the custom ARM_ENTRY() and ARM_ENDPROC() macros.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
For consistency with CROSS_COMPILE_COMPAT, mechanically rename COMPATCC
to CC_COMPAT so that specifying aspects of the compat vDSO toolchain in
the environment isn't needlessly confusing.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Directly passing the '--target' option to clang by appending to
COMPATCC does not work if COMPATCC has been specified explicitly as
an argument to Make unless the 'override' directive is used, which is
ugly and different to what is done in the top-level Makefile.
Move the '--target' option for clang out of COMPATCC and into
VDSO_CAFLAGS, where it will be picked up when compiling and assembling
the 32-bit vDSO under clang.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KBUILD_CPPFLAGS is defined differently depending on whether the main
compiler is clang or not. This means that it is not possible to build
the compat vDSO with GCC if the rest of the kernel is built with clang.
Define VDSO_CPPFLAGS directly to break this dependency and allow a clang
kernel to build a compat vDSO with GCC:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabihf- CC=clang \
COMPATCC=arm-linux-gnueabihf-gcc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|