summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2024-05-14Merge tag 'irq-core-2024-05-12' of ↵Linus Torvalds2-0/+177
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Core code: - Interrupt storm detection for the lockup watchdog: Lockups which are caused by interrupt storms are not easy to debug because there is no information about the events which make the lockup detector trigger. To make this more user friendly, provide an extenstion to interrupt statistics which allows to take snapshots and an interface to retrieve the delta to the snapshot. Use this new mechanism in the watchdog code to do a two stage lockup analysis by taking the snapshot and printing the deltas for the topmost active interrupts on the second trigger. Note: This contains both the interrupt and the watchdog changes as the latter depend on the former obviously. - Avoid summation loops in the /proc/interrupts output and use the global counter when possible - Skip suspended interrupts on CPU hotplug operations to ensure that they are not delivered before the system resumes the device drivers when coming out of suspend. - On CPU hot-unplug interrupts which are affine to the outgoing CPU are migrated to a different CPU in the affinity mask. This can fail when the CPUs have no vectors left. Instead of giving up try to migrate it to any online CPU and thereby breaking the affinity setting in order to prevent a stale device interrupt which targets an offline CPU - The usual small cleanups Driver code: - Support for the RISCV AIA MSI controller - Make the interrupt allocation for the Loongson PCH controller more flexible to prevent vector exhaustion - The usual set of cleanups and fixes all over the place" * tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc cpuidle: Avoid explicit cpumask allocation on stack irqchip/sifive-plic: Avoid explicit cpumask allocation on stack irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack cpumask: Introduce cpumask_first_and_and() irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown genirq: Reuse irq_is_nmi() genirq/cpuhotplug: Retry with cpu_online_mask when migration fails genirq/cpuhotplug: Skip suspended interrupts when restoring affinity arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251 arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251 ARM: dts: stm32: List exti parent interrupts on stm32mp131 ARM: dts: stm32: List exti parent interrupts on stm32mp151 arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32 irqchip/stm32-exti: Mark events reserved with RIF configuration check irqchip/stm32-exti: Skip secure events irqchip/stm32-exti: Convert driver to standard PM ...
2024-05-14Merge tag 'sched-core-2024-05-13' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Add cpufreq pressure feedback for the scheduler - Rework misfit load-balancing wrt affinity restrictions - Clean up and simplify the code around ::overutilized and ::overload access. - Simplify sched_balance_newidle() - Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES handling that changed the output. - Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch() - Reorganize, clean up and unify most of the higher level scheduler balancing function names around the sched_balance_*() prefix - Simplify the balancing flag code (sched_balance_running) - Miscellaneous cleanups & fixes * tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) sched/pelt: Remove shift of thermal clock sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure() thermal/cpufreq: Remove arch_update_thermal_pressure() sched/cpufreq: Take cpufreq feedback into account cpufreq: Add a cpufreq pressure feedback for the scheduler sched/fair: Fix update of rd->sg_overutilized sched/vtime: Do not include <asm/vtime.h> header s390/irq,nmi: Include <asm/vtime.h> header directly s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover sched/vtime: Get rid of generic vtime_task_switch() implementation sched/vtime: Remove confusing arch_vtime_task_switch() declaration sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized() sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded() sched/fair: Rename root_domain::overload to ::overloaded sched/fair: Use helper functions to access root_domain::overload sched/fair: Check root_domain::overload value before update sched/fair: Combine EAS check with root_domain::overutilized access sched/fair: Simplify the continue_balancing logic in sched_balance_newidle() ...
2024-05-14Merge tag 'perf-core-2024-05-13' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: - Combine perf and BPF for fast evalution of HW breakpoint conditions - Add LBR capture support outside of hardware events - Trigger IO signals for watermark_wakeup - Add RAPL support for Intel Arrow Lake and Lunar Lake - Optimize frequency-throttling - Miscellaneous cleanups & fixes * tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf/bpf: Mark perf_event_set_bpf_handler() and perf_event_free_bpf_handler() as inline too selftests/perf_events: Test FASYNC with watermark wakeups perf/ring_buffer: Trigger IO signals for watermark_wakeup perf: Move perf_event_fasync() to perf_event.h perf/bpf: Change the !CONFIG_BPF_SYSCALL stubs to static inlines selftest/bpf: Test a perf BPF program that suppresses side effects perf/bpf: Allow a BPF program to suppress all sample side effects perf/bpf: Remove unneeded uses_default_overflow_handler() perf/bpf: Call BPF handler directly, not through overflow machinery perf/bpf: Remove #ifdef CONFIG_BPF_SYSCALL from struct perf_event members perf/bpf: Create bpf_overflow_handler() stub for !CONFIG_BPF_SYSCALL perf/bpf: Reorder bpf_overflow_handler() ahead of __perf_event_overflow() perf/x86/rapl: Add support for Intel Lunar Lake perf/x86/rapl: Add support for Intel Arrow Lake perf/core: Reduce PMU access to adjust sample freq perf/core: Optimize perf_adjust_freq_unthr_context() perf/x86/amd: Don't reject non-sampling events with configured LBR perf/x86/amd: Support capturing LBR from software events perf/x86/amd: Avoid taking branches before disabling LBR perf/x86/amd: Ensure amd_pmu_core_disable_all() is always inlined ...
2024-05-14Merge tag 'v6.10-p1' of ↵Linus Torvalds2-30/+24
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove crypto stats interface Algorithms: - Add faster AES-XTS on modern x86_64 CPUs - Forbid curves with order less than 224 bits in ecc (FIPS 186-5) - Add ECDSA NIST P521 Drivers: - Expose otp zone in atmel - Add dh fallback for primes > 4K in qat - Add interface for live migration in qat - Use dma for aes requests in starfive - Add full DMA support for stm32mpx in stm32 - Add Tegra Security Engine driver Others: - Introduce scope-based x509_certificate allocation" * tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits) crypto: atmel-sha204a - provide the otp content crypto: atmel-sha204a - add reading from otp zone crypto: atmel-i2c - rename read function crypto: atmel-i2c - add missing arg description crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy() crypto: sahara - use 'time_left' variable with wait_for_completion_timeout() crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout() crypto: caam - i.MX8ULP donot have CAAM page0 access crypto: caam - init-clk based on caam-page0-access crypto: starfive - Use fallback for unaligned dma access crypto: starfive - Do not free stack buffer crypto: starfive - Skip unneeded fallback allocation crypto: starfive - Skip dma setup for zeroed message crypto: hisilicon/sec2 - fix for register offset crypto: hisilicon/debugfs - mask the unnecessary info from the dump crypto: qat - specify firmware files for 402xx crypto: x86/aes-gcm - simplify GCM hash subkey derivation crypto: x86/aes-gcm - delete unused GCM assembly code crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath() hwrng: stm32 - repair clock handling ...
2024-05-14Merge tag 'hardening-6.10-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "The bulk of the changes here are related to refactoring and expanding the KUnit tests for string helper and fortify behavior. Some trivial strncpy replacements in fs/ were carried in my tree. Also some fixes to SCSI string handling were carried in my tree since the helper for those was introduce here. Beyond that, just little fixes all around: objtool getting confused about LKDTM+KCFI, preparing for future refactors (constification of sysctl tables, additional __counted_by annotations), a Clang UBSAN+i386 crash fix, and adding more options in the hardening.config Kconfig fragment. Summary: - selftests: Add str*cmp tests (Ivan Orlov) - __counted_by: provide UAPI for _le/_be variants (Erick Archer) - Various strncpy deprecation refactors (Justin Stitt) - stackleak: Use a copy of soon-to-be-const sysctl table (Thomas Weißschuh) - UBSAN: Work around i386 -regparm=3 bug with Clang prior to version 19 - Provide helper to deal with non-NUL-terminated string copying - SCSI: Fix older string copying bugs (with new helper) - selftests: Consolidate string helper behavioral tests - selftests: add memcpy() fortify tests - string: Add additional __realloc_size() annotations for "dup" helpers - LKDTM: Fix KCFI+rodata+objtool confusion - hardening.config: Enable KCFI" * tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits) uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be} stackleak: Use a copy of the ctl_table argument string: Add additional __realloc_size() annotations for "dup" helpers kunit/fortify: Fix replaced failure path to unbreak __alloc_size hardening: Enable KCFI and some other options lkdtm: Disable CFI checking for perms functions kunit/fortify: Add memcpy() tests kunit/fortify: Do not spam logs with fortify WARNs kunit/fortify: Rename tests to use recommended conventions init: replace deprecated strncpy with strscpy_pad kunit/fortify: Fix mismatched kvalloc()/vfree() usage scsi: qla2xxx: Avoid possible run-time warning with long model_num scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings fs: ecryptfs: replace deprecated strncpy with strscpy hfsplus: refactor copy_name to not use strncpy reiserfs: replace deprecated strncpy with scnprintf virt: acrn: replace deprecated strncpy with strscpy ubsan: Avoid i386 UBSAN handler crashes with Clang ubsan: Remove 1-element array usage in debug reporting ...
2024-05-13Merge tag 'soc-defconfig-6.10' of ↵Linus Torvalds1-0/+23
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "Most of the changes enable additional device driver modules and arm64 platforms. In addition, the usb onboard-device support and ext4 security labels are turned on" * tag 'soc-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits) arm64: defconfig: enable Airoha platform arm64: defconfig: enable Khadas TS050 panel as module arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in arm64: defconfig: Enable Tegra Security Engine arm64: defconfig: enable REGULATOR_QCOM_USB_VBUS ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV arm64: defconfig: enable ext4 security labels arm64: defconfig: qcom: enable X1E80100 sound card ARM: configs: sunxi: Enable DRM_DW_HDMI arm64: defconfig: build snd_bcm2835 as module arm64: defconfig: enable Rockchip Samsung USBDP PHY ARM: shmobile: defconfig: Refresh for v6.9-rc1 arm64: defconfig: build ath12k as a module arm64: defconfig: Enable sc7280 display and gpu clock controllers ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module arm64: defconfig: support Mali CSF-based GPUs arm64: defconfig: enable Rockchip RK3308 internal audio codec driver arm64: defconfig: Enable R9A09G057 SoC arm64: defconfig: Enable Renesas DA9062 PMIC ...
2024-05-13Merge tag 'soc-arm-6.10' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC code changes from Arnd Bergmann: "The code changes are fairly minimal, there is a bit of conversion of the old orion5x platform to modern gpio descriptors, the Kconfig entry for the added EN7581 platform and a sysfs change for the i.MX PMU device" * tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: add Airoha EN7581 platform ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs ARM: imx: Assign parents for mmdc event_source devices
2024-05-13Merge tag 'soc-drivers-6.10' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "As usual, these are updates for drivers that are specific to certain SoCs or firmware running on them. Notable updates include - The new STMicroelectronics STM32 "firewall" bus driver that is used to provide a barrier between different parts of an SoC - Lots of updates for the Qualcomm platform drivers, in particular SCM, which gets a rewrite of its initialization code - Firmware driver updates for Arm FF-A notification interrupts and indirect messaging, SCMI firmware support for pin control and vendor specific interfaces, and TEE firmware interface changes across multiple TEE drivers - A larger cleanup of the Mediatek CMDQ driver and some related bits - Kconfig changes for riscv drivers to prepare for adding Kanaan k230 support - Multiple minor updates for the TI sysc bus driver, memory controllers, hisilicon hccs and more" * tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits) firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G soc: qcom: pmic_glink: Make client-lock non-sleeping dt-bindings: soc: qcom,wcnss: fix bluetooth address example soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234 bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall() bus: etzpc: introduce ETZPC firewall controller driver firmware: arm_ffa: Avoid queuing work when running on the worker queue bus: ti-sysc: Drop legacy idle quirk handling bus: ti-sysc: Drop legacy quirk handling for smartreflex bus: ti-sysc: Drop legacy quirk handling for uarts bus: ti-sysc: Add a description and copyrights bus: ti-sysc: Move check for no-reset-on-init soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute firmware: arm_ffa: Fix memory corruption in ffa_msg_send2() bus: rifsc: introduce RIFSC firewall controller driver of: property: fw_devlink: Add support for "access-controller" soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200 soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS ...
2024-05-13Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds342-1135/+16013
Pull SoC devicetree updates from Arnd Bergmann: "The updates this time are a bit smaller than most times, mainly because it is not totally dominated by new Qualcomm hardware support. Instead, we larger than average updates for Rockchips, NXP, Allwinner and TI. The only two new SoCs this time are both from NXP and are minor variants of already supported ones. The updates for aspeed, amlogic and mediatek came a little late, so I'm saving those for part 2 in a few days if everything turns out fine. New machines this time contain: - two Broadcom SoC based wireless routers from Asus - Five allwinner based consumer devices for gaming, set-top-box and eboot reader applications - Three older phones based on Qualcomm chips, plus the more recent Sony Xperia 1 V - 14 industrial and embedded boards based on NXP i.MX6, i.MX8, layerscape and s32g3 SoCs - six rockchips boards including another handheld game console and a few single-board computers On top of these, we have the usual cleanups for dtc warnings and updates to add more features to already merged machines" * tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits) arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: Add/fix /memory node unit-addresses arm64: dts: qcom: qcs404: fix bluetooth device address arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader ...
2024-05-10arm64: defconfig: enable Airoha platformDaniel Danzberger1-0/+1
Enables the ARCH_AIROHA config by default. Signed-off-by: Daniel Danzberger <dd@embedd.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/65737ca5506371ef84c3a055e68d280f314e3b41.1709975956.git.lorenzo@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-10arm64: add Airoha EN7581 platformDaniel Danzberger1-0/+7
Introduce the Kconfig entry for the Airoha EN7581 multicore architecture available in the Airoha EN7581 evaluation board. Signed-off-by: Daniel Danzberger <dd@embedd.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/d52d95db313e6a58ba997ba2181faf78a1014bcc.1709975956.git.lorenzo@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-09Merge tag 'net-6.9-rc8' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and IPsec. The bridge patch is actually a follow-up to a recent fix in the same area. We have a pending v6.8 AF_UNIX regression; it should be solved soon, but not in time for this PR. Current release - regressions: - eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs - net: bridge: fix corrupted ethernet header on multicast-to-unicast Current release - new code bugs: - xfrm: fix possible bad pointer derferencing in error path Previous releases - regressionis: - core: fix out-of-bounds access in ops_init - ipv6: - fix potential uninit-value access in __ip6_make_skb() - fib6_rules: avoid possible NULL dereference in fib6_rule_action() - tcp: use refcount_inc_not_zero() in tcp_twsk_unique(). - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation - rxrpc: fix congestion control algorithm - bluetooth: - l2cap: fix slab-use-after-free in l2cap_connect() - msft: fix slab-use-after-free in msft_do_close() - eth: hns3: fix kernel crash when devlink reload during initialization - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family Previous releases - always broken: - xfrm: preserve vlan tags for transport mode software GRO - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets - eth: hns3: keep using user config after hardware reset" * tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family net: hns3: fix kernel crash when devlink reload during initialization net: hns3: fix port vlan filter not disabled issue net: hns3: use appropriate barrier function after setting a bit value net: hns3: release PTP resources if pf initialization failed net: hns3: change type of numa_node_mask as nodemask_t net: hns3: direct return when receive a unknown mailbox message net: hns3: using user configure after hardware reset net/smc: fix neighbour and rtable leak in smc_ib_find_route() ipv6: prevent NULL dereference in ip6_output() hsr: Simplify code for announcing HSR nodes timer setup ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action() dt-bindings: net: mediatek: remove wrongly added clocks and SerDes rxrpc: Only transmit one ACK per jumbo packet received rxrpc: Fix congestion control algorithm selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC ipv6: Fix potential uninit-value access in __ip6_make_skb() net: phy: marvell-88q2xxx: add support for Rev B1 and B2 appletalk: Improve handling of broadcast packets ...
2024-05-08Merge tag 'soc-fixes-6.9-3' of ↵Linus Torvalds1-17/+13
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a couple of last minute fixes that came in over the previous week, addressing: - A pin configuration bug on a qualcomm board that caused issues with ethernet and mmc - Two minor code fixes for misleading console output in the microchip firmware driver - A build warning in the sifive cache driver" * tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firmware: microchip: clarify that sizes and addresses are in hex firmware: microchip: don't unconditionally print validation success arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration cache: sifive_ccache: Silence unused variable warning
2024-05-08Merge tag 'qcom-arm64-for-6.10-2' of ↵Arnd Bergmann5-4/+171
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Qualcomm Arm64 DeviceTree updates for v6.10 This corrects the obviously broken compatible of the USB VBUS regulator in PM6150. It clears the odd-looking default address on QCS404 EVB, with the expectation that a proper address is provides by other means. The newly added SM8650 GPU node is corrected with a missing memory region. The third DWC3 instance on SC8280XP is added, and enabled on Lenovo Thinkpad X13s to give working fingerprint sensor. * tag 'qcom-arm64-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible arm64: dts: qcom: qcs404: fix bluetooth device address arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controller arm64: dts: qcom: sm8650: Fix GPU cx_mem size Link: https://lore.kernel.org/r/20240508021820.206441-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-08Merge tag 'qcom-arm64-defconfig-for-6.10-2' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig One more Qualcomm Arm64 defconfig update for v6.10 This enables the SM6115 interconnect provider, to make it possible to boot boards on this SoC. * tag 'qcom-arm64-defconfig-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in Link: https://lore.kernel.org/r/20240508021312.206121-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'amlogic-defconfig-for-v6.10' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/defconfig Amlogic defconfig changes for v6.10: - Enable Khadas TS050 driver as module * tag 'amlogic-defconfig-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: defconfig: enable Khadas TS050 panel as module Link: https://lore.kernel.org/r/13bf8bc4-1cb7-4b94-8c98-9d1cdae5e1f8@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'samsung-dt64-6.10-2' of ↵Arnd Bergmann2-0/+170
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.10, part two Few changes exclusively for Google GS101: 1. Add HSI0 and HSI2 clock controllers (CMUs). 2. Add USB 3.1 Dual Role Device (DRD) support. 3. Add UFS (Universal Flash Storage) support. 4. Document bus clocks in pin controllers necessary for accessing registers. * tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes arm64: dts: exynos: gs101: Add the hsi2 sysreg node dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible arm64: dts: exynos: gs101-oriole: enable USB on this board arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'v6.10-rockchip-dts64-2' of ↵Arnd Bergmann8-0/+879
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well as two new iommus on rk3588. * tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C Link: https://lore.kernel.org/r/13810480.dW097sEU6C@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'mvebu-dt64-6.10-1' of ↵Arnd Bergmann8-67/+88
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.10 (part 1) Few dts fix for dt validation * tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: marvell: cn9130-crb: drop unneeded "status" arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses arm64: dts: marvell: cn9130-db: drop wrong unit-addresses arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells arm64: dts: marvell: ap80x: fix IOMMU unit address Link: https://lore.kernel.org/r/87jzk8ndyy.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'qcom-arm64-fixes-for-6.9-2' of ↵Arnd Bergmann1-17/+13
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One more Qualcomm Arm64 DeviceTree fix for v6.9 On ths SA8155P automotive platform, the wrong gpio controller is defined for the SD-card detect pin, which depending on probe ordering of things cause ethernet to be broken. The card detect pin reference is corrected to solve this problem. * tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-05arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit addressKrzysztof Kozlowski1-34/+64
The Espressobin Ultra DTS includes Espressobin DTSI which defines ethernet-switch@1 node. The Ultra DTS overrides "reg" to 3, but that leaves still old unit address which conflicts with the new phy@1 node (W=1 dtc warning): armada-3720-espressobin.dtsi:148.29-203.4: Warning (unique_unit_address_if_enabled): /soc/internal-regs@d0000000/mdio@32004/ethernet-switch@1: duplicate unit-address (also used in node /soc/internal-regs@d0000000/mdio@32004/ethernet-phy@1) Fix this by deleting ethernet-switch@1 node and merging original node with code from Ultra DTS into new ethernet-switch@3. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-05arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cellsKrzysztof Kozlowski1-2/+0
Flash node uses single "partition" node to describe partitions, so remove deprecated address/size-cells properties to also fix dtc W=1 warnings: armada-3720-turris-mox.dts:218.10-255.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/spi@10600/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-05arm64: dts: marvell: eDPU: drop redundant address/size-cellsKrzysztof Kozlowski1-2/+0
The ethernet-switch node does not have children with unit addresses, so address/size-cells are not really correct, as reported by dtc W=1 warning: armada-3720-eDPU.dts:26.19-60.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/mdio@32004/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property This probably also fixes dtbs_check warning, but I could not find it, so not sure about that. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-05-03arm64: dts: qcom: pm6150: correct USB VBUS regulator compatibleKrzysztof Kozlowski1-2/+2
The first part of the compatible of USB VBUS node misses ending quote, thus we have one long compatible consisting of two compatible strings leading to dtbs_check warnings: sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$' sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg'] Reported-by: Rob Herring <robh@kernel.org> Fixes: f81c2f01cad6 ("arm64: dts: qcom: pm6150: define USB-C related blocks") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240330091311.6224-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-03arm64: dts: mediatek: mt8183-pico6: Fix bluetooth nodeChen-Yu Tsai1-1/+2
Bluetooth is not a random device connected to the MMC/SD controller. It is function 2 of the SDIO device. Fix the address of the bluetooth node. Also fix the node name and drop the label. Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-03arm64: dts: rockchip: add rk3588 pcie and php IOMMUsNiklas Cassel1-0/+24
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs. iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID): arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC. Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable onboard spi flash for rock-3aChukun Pan1-0/+14
There is a mx25u12835f spi flash on this board, enable it. [ 2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes) Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240409120003.309358-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5Jimmy Hon1-0/+94
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI or XHCI mode. Displayport AltMode is not yet supported. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Enable GPU on Orange Pi 5Jimmy Hon1-0/+5
Enable the Mali GPU in the Orange Pi 5 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20240425222913.1760-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: enable GPU on khadas-edge2Muhammed Efe Cetin1-0/+5
Enable the Mali GPU node on Khadas Edge 2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Link: https://lore.kernel.org/r/20240501142241.98554-1-efectn@6tel.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO boardAnand Moon1-0/+8
Add the proper nodes to activate the USB 3.0 ports on the Edgeble NCM6A-IO board. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute ModuleAnand Moon1-0/+2
On Edgeble Neural Compute Module add system-power-controller property to RK806 pmic so that these chips can power off the device. Cc: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Anand Moon <anand@edgeble.ai> Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: rockchip: Add Radxa ROCK 3CChukun Pan2-0/+727
The Radxa ROCK 3C is a development board with the Rockchip RK3566 SoC. It has the following features: - 1/2/4GB LPDDR4 - 1x HDMI Type A - 1x PCIE 2.0 slot - 1x FAN connector - 3.5mm jack with mic - 1GbE RTL8211F Ethernet - 1x USB 3.0, 3x USB 2.0 - 40-pin expansion header - MicroSD card/eMMC socket - 16MB SPI NOR (gd25lq128d) - AP6256 or AIC8800 WiFi/BT Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn [dropped rk809-sound and not specified pmic sound properties] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrlAndré Draszik1-0/+9
The pinctrl instances hsi1, gsactrl, and gsacore need a clock for register access to work. Since we haven't implemented the relevant CMUs for the clocks required by these instances just add empty clocks for now so as to make the DT pass the validation checks. Once the clocks are implmented in the gs101 clock driver, these should be updated then. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-4-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2André Draszik1-0/+2
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-3-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]André Draszik1-0/+4
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-2-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) aliveAndré Draszik1-0/+4
This bus clock is needed for pinctrl register access to work. Add it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-1-14fc988139dd@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-03arm64: defconfig: enable Khadas TS050 panel as moduleNeil Armstrong1-0/+1
Enable the Khadas TS050 panel driver as module since it's required to use the TS050 panel on the Khadas VIM3 and VIM3L boards. Link: https://lore.kernel.org/r/20240422-amlogic-v6-9-upstream-deconfig-dsi-v1-1-01511908477c@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-05-02Merge tag 'net-6.9-rc7' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Relatively calm week, likely due to public holiday in most places. No known outstanding regressions. Current release - regressions: - rxrpc: fix wrong alignmask in __page_frag_alloc_align() - eth: e1000e: change usleep_range to udelay in PHY mdic access Previous releases - regressions: - gro: fix udp bad offset in socket lookup - bpf: fix incorrect runtime stat for arm64 - tipc: fix UAF in error path - netfs: fix a potential infinite loop in extract_user_to_sg() - eth: ice: ensure the copied buf is NUL terminated - eth: qeth: fix kernel panic after setting hsuid Previous releases - always broken: - bpf: - verifier: prevent userspace memory access - xdp: use flags field to disambiguate broadcast redirect - bridge: fix multicast-to-unicast with fraglist GSO - mptcp: ensure snd_nxt is properly initialized on connect - nsh: fix outer header access in nsh_gso_segment(). - eth: bcmgenet: fix racing registers access - eth: vxlan: fix stats counters. Misc: - a bunch of MAINTAINERS file updates" * tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) MAINTAINERS: mark MYRICOM MYRI-10G as Orphan MAINTAINERS: remove Ariel Elior net: gro: add flush check in udp_gro_receive_segment net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb ipv4: Fix uninit-value access in __ip_make_skb() s390/qeth: Fix kernel panic after setting hsuid vxlan: Pull inner IP header in vxlan_rcv(). tipc: fix a possible memleak in tipc_buf_append tipc: fix UAF in error path rxrpc: Clients must accept conn from any address net: core: reject skb_copy(_expand) for fraglist GSO skbs net: bridge: fix multicast-to-unicast with fraglist GSO mptcp: ensure snd_nxt is properly initialized on connect e1000e: change usleep_range to udelay in PHY mdic access net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341 cxgb4: Properly lock TX queue for the selftest. rxrpc: Fix using alignmask being zero for __page_frag_alloc_align() vxlan: Add missing VNI filter counter update in arp_reduce(). vxlan: Fix racy device stats updates. net: qede: use return from qede_parse_actions() ...
2024-05-02Merge tag 'ti-k3-dt-for-v6.10' of ↵Arnd Bergmann38-167/+597
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.10 Generic Cleanups/Fixes: - fixup of generated dtb imx219 overlay file names - Remove UART baud rate selection in device tree. - Use exact ranges for FSS. SoC specific Fixes/Features: AM625: - Add USB PHY2 region and usb phy control registers AM62A - Add USB PHY2 region and usb phy control registers, Disable USB LPM. - Add wave-512 video encoder/decoder support - Enable UHS mode for SD AM62P: - Disable ethernet by default - Add USB support AM654 - Serdes fixups - SDHCI fixups. AM67/j722s: - Disable ethernet by default - Add USB support AM68/J721s2: - Add main ESM range - Add support for SDR104 AM69/J784S4: - Add main ESM range - Enable support for UHS mode Board specific fixes/Features: AM625: - BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset - phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable ability to apply overlays - verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci - lp-sk: Drop power button - sk: minor white space cleanup. AM64 - phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan AM65: - iot2050: Add icssg-prueth for PG1 AM67/j722s: - evm: Enable UHS support for SD card and eMMC support. AM69/J784s4: - evm/sk: Fix uart pins and pinctrl macro usage. * tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits) arm64: dts: ti: Fix csi2-dual-imx219 dtb names arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C arm64: dts: ti: k3-j784s4: Add main esm address range arm64: dts: ti: k3-j721s2: Add main esm address range arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes arm64: dts: ti: k3-am65-main: Fix sdhci node properties arm64: dts: ti: Enable overlays for the am625-phyboard-lyra arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type arm64: dts: ti: k3-am62a: Disable USB LPM arm64: dts: ti: k3-am62p: add the USB sub-system ... Link: https://lore.kernel.org/r/20240501124319.ake5j2oc5pbnn5nb@contour Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-02arm64: dts: Add/fix /memory node unit-addressesRob Herring15-15/+15
'/memory' nodes always have a 'reg' property, and therefore should have a unit-address with just plain hex (i.e. no commas). Fix all the arm64 '/memory' nodes. It's possible that some bootloader depends on /memory (arm32 ATAG to DT code does for example). If so, the memory node should be commented with that requirement. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240430191856.874600-2-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-01hardening: Enable KCFI and some other optionsKees Cook1-0/+1
Add some stuff that got missed along the way: - CONFIG_UNWIND_PATCH_PAC_INTO_SCS=y so SCS vs PAC is hardware selectable. - CONFIG_X86_KERNEL_IBT=y while a default, just be sure. - CONFIG_CFI_CLANG=y globally. - CONFIG_PAGE_TABLE_CHECK=y for userspace mapping sanity. Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240501193709.make.982-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2024-05-01arm64: dts: qcom: qcs404: fix bluetooth device addressJohan Hovold1-1/+1
The 'local-bd-address' property is used to pass a unique Bluetooth device address from the boot firmware to the kernel and should otherwise be left unset so that the OS can prevent the controller from being used until a valid address has been provided through some other means (e.g. using btmgmt). Fixes: 60f77ae7d1c1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint readerJohan Hovold1-0/+85
Enable the multiport USB controller to which the fingerprint reader in the X13s power button is connected. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240501065641.965-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: qcom: sc8280xp: Add USB DWC3 Multiport controllerKrishna Kurapati1-0/+82
Add USB and DWC3 node for tertiary port of SC8280 along with Multiport interrupts and PHYs. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240429162048.2133512-2-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-01arm64: dts: ti: Fix csi2-dual-imx219 dtb namesJai Luthra1-3/+3
Fix the output filenames of the combined device tree blobs generated by applying *-csi2-dual-imx219-* overlays on the base dtbs during compile test. Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219") Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Link: https://lore.kernel.org/r/104fbdbc-a3f6-091a-72f4-17d4fa24ad92@ti.com/ Signed-off-by: Nishanth Menon <nm@ti.com>
2024-04-30arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulatorPeter Griffin1-0/+18
Enable ufs & ufs phy nodes for Oriole. Also define the ufs regulator node. ufs regulator is a stub until full s2mpg11 slave pmic support is added. The gpio defined is for the BOOTLD0 (gs101) signal connected to UFS_EN(s2mpg11) gpio enabled voltage rail for UFS. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-4-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodesPeter Griffin1-0/+36
Add the ufs controller node and phy node for gs101. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-3-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30arm64: dts: exynos: gs101: Add the hsi2 sysreg nodePeter Griffin1-0/+6
This has some configuration bits such as sharability that are required by UFS. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240430141445.2688499-2-peter.griffin@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-30Merge tag 'kvmarm-fixes-6.9-2' of ↵Paolo Bonzini1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #2 - Fix + test for a NULL dereference resulting from unsanitised user input in the vgic-v2 device attribute accessors
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 00:12:23 +0300