| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Two more SME fixes related to ptrace(): ensure that the SME is
properly set up for the target thread and that the thread sees
the ZT registers set via ptrace"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Ensure that the task sees ZT writes on first use
arm64/ptrace: Ensure that SME is set up for target when writing SSVE state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, mostly DT fixes for the major Arm platforms from Qualcomm
and NXP, plus a bit for Rockchips and others:
The qualcomm fixes mainly deal with their higher-end arm64 devices
trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
regression for the DSI phy.
NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
the imx93 "anatop" module and the CSI interface. On the 32-bit side,
there are functional fixes for RTC, display and SD card intefaces.
Rockchip fixes are for wifi support on certain boards, a eMMC
stability and DT build warnings.
On TI OMAP, a regulator is described in DT to avoid problems with the
ethernet phy initialization.
The code changes include a missing MMIO serialization on OMAP, plus a
few minor fixes on ASpeed and AMD/Zynq chips"
* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
soc: aspeed: socinfo: Add kfree for kstrdup
soc: aspeed: uart-routing: Use __sysfs_match_string
ARM: dts: integrator: fix PCI bus dtc warnings
arm64: dts: imx93: Fix anatop node size
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
ARM: dts: imx: Set default tuning step for imx6sx usdhc
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
ARM: dts: imx: Set default tuning step for imx7d usdhc
ARM: dts: imx6: phytec: fix RTC interrupt level
ARM: dts: imx6sx: Remove LDB endpoint
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
ARM: zynq: Explicitly include correct DT includes
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic regression fix from Arnd Bergmann:
"Just one partial revert for a commit from the merge window that caused
annoying behavior when building old kernels on arm64 hosts"
* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"
|
|
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Link: https://lore.kernel.org/r/20230816-arm64-zt-ptrace-first-use-v2-1-00aa82847e28@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
loongarch"
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v6.5
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells
Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5, 2nd round:
- Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU
memory area.
- Fix RTC interrupt level on imx6qdl-phytec-mira board.
- Remove LDB endpoint from from the common imx6sx.dtsi as it causes
regression for boards that has the LCDIF connected directly to
a parallel display.
- Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree
to avoid overclocking.
- Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix
a tuning failure seen with some SD cards.
* tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx93: Fix anatop node size
ARM: dts: imx: Set default tuning step for imx6sx usdhc
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
ARM: dts: imx: Set default tuning step for imx7d usdhc
ARM: dts: imx6: phytec: fix RTC interrupt level
ARM: dts: imx6sx: Remove LDB endpoint
Link: https://lore.kernel.org/r/20230809100034.GS151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fix SEV race condition
ARM:
- Fixes for the configuration of SVE/SME traps when hVHE mode is in
use
- Allow use of pKVM on systems with FF-A implementations that are
v1.0 compatible
- Request/release percpu IRQs (arch timer, vGIC maintenance)
correctly when pKVM is in use
- Fix function prototype after __kvm_host_psci_cpu_entry() rename
- Skip to the next instruction when emulating writes to TCR_EL1 on
AmpereOne systems
Selftests:
- Fix missing include"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/rseq: Fix build with undefined __weak
KVM: SEV: remove ghcb variable declarations
KVM: SEV: only access GHCB fields once
KVM: SEV: snapshot the GHCB before accessing it
KVM: arm64: Skip instruction after emulating write to TCR_EL1
KVM: arm64: fix __kvm_host_psci_cpu_entry() prototype
KVM: arm64: Fix resetting SME trap values on reset for (h)VHE
KVM: arm64: Fix resetting SVE trap values on reset for hVHE
KVM: arm64: Use the appropriate feature trap register when activating traps
KVM: arm64: Helper to write to appropriate feature trap register based on mode
KVM: arm64: Disable SME traps for (h)VHE at setup
KVM: arm64: Use the appropriate feature trap register for SVE at EL2 setup
KVM: arm64: Factor out code for checking (h)VHE mode into a macro
KVM: arm64: Rephrase percpu enable/disable tracking in terms of hyp
KVM: arm64: Fix hardware enable/disable flows for pKVM
KVM: arm64: Allow pKVM on v1.0 compatible FF-A implementations
|
|
Although the memory map of i.MX93 reference manual rev. 2 claims that
analog top has start address of 0x44480000 and end address of 0x4448ffff,
this overlaps with TMU memory area starting at 0x44482000, as stated in
section 73.6.1.
As PLL configuration registers start at addresses up to 0x44481400, as used
by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area
but keep all PLL registers inside.
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"More SVE/SME fixes for ptrace() and for the (potentially future) case
where SME is implemented in hardware without SVE support"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE
arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems
arm64/ptrace: Don't enable SVE when setting streaming SVE
arm64/ptrace: Flush FP state when setting ZT0
arm64/fpsimd: Clear SME state in the target task when setting the VL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #2
- Fixes for the configuration of SVE/SME traps when hVHE mode is in use
- Allow use of pKVM on systems with FF-A implementations that are v1.0
compatible
- Request/release percpu IRQs (arch timer, vGIC maintenance) correctly
when pKVM is in use
- Fix function prototype after __kvm_host_psci_cpu_entry() rename
- Skip to the next instruction when emulating writes to TCR_EL1 on
AmpereOne systems
|
|
We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set. Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too. These functions are only used
by the ptrace code.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.
The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.
Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When setting ZT0 via ptrace we do not currently force a reload of the
floating point register state from memory, do that to ensure that the newly
set value gets loaded into the registers on next task execution.
The function was templated off the function for FPSIMD which due to our
providing the option of embedding a FPSIMD regset within the SVE regset
does not directly include the flush.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-zt0-flush-v1-1-72e854eaf96e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.
Clear the flag in the target task.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:
- SoCFPGA: Fix incorrect I2C property for SCL signal
- Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
RZ/V2L.
- Juno/Vexpress: remove a dangling symlink
- at91: sam9x60 SoC detection compatible strings
- nspire: Fix arm primecell compatible string
On the NXP i.MX platform, there multiple issues that get addressed:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable
disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
bus_power_dev child, so that runtime PM can translate into the
necessary GPC power domain action
On the driver side, there are two fixes for tegra memory controller
drivers addressing regressions from the merge window, a couple of
minor correctness fixes for SCMI and SMCCC firmware, as well as a
build fix for an lcd backlight driver"
* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
backlight: corgi_lcd: fix missing prototype
memory: tegra: make icc_set_bw return zero if BWMGR not supported
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
ARM: dts: at91: sam9x60: fix the SOC detection
ARM: dts: nspire: Fix arm primecell compatible string
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
...
|
|
Commit 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI
nodes") broke reg-names, possibly with search-and-replace. Fix it.
Fixes: 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CSI1 PHY reference clock is limited to 125 MHz according to:
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
Table 5-1. Clock Root Table (continued) / page 307
Slice Index n = 123 .
Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be
fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Based on a patch from Marek Vasut for the imx8mn.
Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The CSI1 PHY reference clock are limited to 125 MHz according to:
i.MX 8M Nano Applications Processor Reference Manual, Rev. 2, 07/2022
Table 5-1. Clock Root Table (continued) / page 319
Slice Index n = 123 .
Currently those IMX8MN_CLK_CSI1_PHY_REF clock are configured to be
fed directly from 1 GHz PLL2 , which overclocks them . Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Fixes: ae9279f301b5 ("arm64: dts: imx8mn: Add CSI and ISI Nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A couple of SME updates for recent fixes (one of which went to
stable): reverting the flushing of the SME hardware state along with
the thread flushing and making sure we have the correct vector length
before reallocating.
- An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs"
is 0 (the spec reports the number of IDs in the mapping range minus
1).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()
arm64/sme: Set new vector length before reallocating
arm64/fpsimd: Don't flush SME register hardware state along with thread
|
|
Whelp, this is embarrassing. Since commit 082fdfd13841 ("KVM: arm64:
Prevent guests from enabling HA/HD on Ampere1") KVM traps writes to
TCR_EL1 on AmpereOne to work around an erratum in the unadvertised
HAFDBS implementation, preventing the guest from enabling the feature.
Unfortunately, I failed virtualization 101 when working on that change,
and forgot to advance PC after instruction emulation.
Do the right thing and skip the MSR instruction after emulating the
write.
Fixes: 082fdfd13841 ("KVM: arm64: Prevent guests from enabling HA/HD on Ampere1")
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230728000824.3848025-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts fix for v6.5
- Fix incorrect I2C property for SCL signal
* tag 'socfpga_dts_fix_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix incorrect I2C property for SCL signal
Link: https://lore.kernel.org/r/20230724145617.887443-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.5
- Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L.
* tag 'renesas-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690463347.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.
Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We recently changed the fpsimd thread flush to flush the physical SME
state as well as the thread state for the current thread. Unfortunately
this leads to intermittent corruption in interaction with the lazy
FPSIMD register switching. When under heavy load such as can be
triggered by the startup phase of fp-stress it is possible that the
current thread may not be scheduled prior to returning to userspace, and
indeed we may end up returning to the last thread that was scheduled on
the PE without ever exiting the kernel to any other task. If that
happens then we will not reload the register state from memory, leading
to loss of any SME register state.
Since this was purely an attempt to defensively close off potential
problems revert the change.
Fixes: af3215fd0230 ("arm64/fpsimd: Exit streaming mode when flushing tasks")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230724-arm64-dont-flush-smstate-v1-1-9a8b637ace6c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The kvm_host_psci_cpu_entry() function was renamed in order to add a wrapper around
it, but the prototype did not change, so now the missing-prototype warning came
back in W=1 builds:
arch/arm64/kvm/hyp/nvhe/psci-relay.c:203:28: error: no previous prototype for function '__kvm_host_psci_cpu_entry' [-Werror,-Wmissing-prototypes]
asmlinkage void __noreturn __kvm_host_psci_cpu_entry(bool is_cpu_on)
Fixes: dcf89d1111995 ("KVM: arm64: Add missing BTI instructions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724121850.1386668-1-arnd@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Ensure that SME traps are disabled for (h)VHE when getting the
reset value for the architectural feature control register.
Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-9-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Ensure that SVE traps are disabled for hVHE, if the FPSIMD state
isn't owned by the guest, when getting the reset value for the
architectural feature control register.
Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-8-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Instead of writing directly to cptr_el2, use the helper that
selects which feature trap register to write to based on the KVM
mode.
Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-7-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Factor out the code that decides whether to write to the feature
trap registers, CPTR_EL2 or CPACR_EL1, based on the KVM mode,
i.e., (h)VHE or nVHE.
This function will be used in the subsequent patch.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-6-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Ensure that SME traps are disabled for (h)VHE when setting up
EL2, as they are for nVHE.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Use the architectural feature trap/control register that
corresponds to the current KVM mode, i.e., CPTR_EL2 or CPACR_EL1,
when setting up SVE feature traps.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230724123829.2929609-4-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The code for checking whether the kernel is in (h)VHE mode is
repeated, and will be needed again in future patches. Factor it
out in a macro.
No functional change intended.
No change in emitted assembly code intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/kvmarm/20230724123829.2929609-3-tabba@google.com/
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names start with 'tci' instead of 'tgi'.
Replace the below overflow/underflow interrupt names:
- tgiv0->tciv0
- tgiv1->tciv1
- tgiu1->tciu1
- tgiv2->tciv2
- tgiu2->tciu2
- tgiv3->tciv3
- tgiv4->tciv4
- tgiv6->tciv6
- tgiv7->tciv7
- tgiv8->tciv8
- tgiu8->tciu8
Fixes: 26336d66d021 ("arm64: dts: renesas: r9a07g044: Add MTU3a node")
Fixes: dd123dd01def ("arm64: dts: renesas: r9a07g054: Add MTU3a node")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230724091927.123847-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes: f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards")
Cc: stable@vger.kernel.org
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early
boot failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer
controls have UNKNOWN behavior under nested virt
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel
BUG in cpu hotplug resulting from per-CPU accessor sanity checking
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names,
ensuring the tracepoints pretty-print the sysreg
s390:
- Two fixes for asynchronous destroy
x86 fixes will come early next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix index value of replaced ASCE
KVM: s390: pv: simplify shutdown and fix race
KVM: arm64: Fix the name of sys_reg_desc related to PMU
KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount
KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption
KVM: arm64: Add missing BTI instructions
KVM: arm64: Correctly handle page aging notifiers for unaligned memslot
KVM: arm64: Disable preemption in kvm_arch_hardware_enable()
KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm
KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.5, part #1
- Avoid pKVM finalization if KVM initialization fails
- Add missing BTI instructions in the hypervisor, fixing an early boot
failure on BTI systems
- Handle MMU notifiers correctly for non hugepage-aligned memslots
- Work around a bug in the architecture where hypervisor timer controls
have UNKNOWN behavior under nested virt.
- Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG
in cpu hotplug resulting from per-CPU accessor sanity checking.
- Make WFI emulation on GICv4 systems robust w.r.t. preemption,
consistently requesting a doorbell interrupt on vcpu_put()
- Uphold RES0 sysreg behavior when emulating older PMU versions
- Avoid macro expansion when initializing PMU register names, ensuring
the tracepoints pretty-print the sysreg.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I've picked up a handful of arm64 fixes while Catalin's been away, so
here they are. Below is the usual summary, but we have basically have
two cleanups, a fix for an SME crash and a fix for hibernation:
- Fix saving of SME state after SVE vector length is changed
- Fix sparse warnings for missing vDSO function prototypes
- Fix hibernation resume path when kfence is enabled
- Fix field names for the HFGxTR_EL2 register"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes
arm64: vdso: Clear common make C=2 warnings
arm64: mm: Make hibernation aware of KFENCE
arm64: Fix HFGxTR_EL2 field naming
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Juno/Vexpress DTS fix for v6.5
A single simple fix removing dangling symlink left as part of arm dts
files movement to vendor sub-directories. It is harmless and causes no
issue for the build but scripts copying files see errors/failures.
* tag 'juno-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
Link: https://lore.kernel.org/r/20230721112359.3369716-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes: 9e4ab6c89109 ("arm64/sme: Implement vector length configuration prctl()s")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
kvm_arm_hardware_enabled is rather misleading, since it doesn't track
the state of all hardware resources needed for running a VM. What it
actually tracks is whether or not the hyp cpu context has been
initialized.
Since we're now at the point where vgic + timer irq management has
been separated from kvm_arm_hardware_enabled, rephrase it (and the
associated helpers) to make it clear what state is being tracked.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230719231855.262973-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When running in protected mode, the hyp stub is disabled after pKVM is
initialized, meaning the host cannot enable/disable the hyp at
runtime. As such, kvm_arm_hardware_enabled is always 1 after
initialization, and kvm_arch_hardware_enable() never enables the vgic
maintenance irq or timer irqs.
Unconditionally enable/disable the vgic + timer irqs in the respective
calls, instead relying on the percpu bookkeeping in the generic code
to keep track of which cpus have the interrupts unmasked.
Fixes: 466d27e48d7c ("KVM: arm64: Simplify the CPUHP logic")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20230719175400.647154-1-rananta@google.com
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
make C=2 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- xxx.o
When I use the command above to do a 'make C=2' check on any object file,
the following warnings are always output:
CHECK arch/arm64/kernel/vdso/vgettimeofday.c
arch/arm64/kernel/vdso/vgettimeofday.c:9:5: warning:
symbol '__kernel_clock_gettime' was not declared. Should it be static?
arch/arm64/kernel/vdso/vgettimeofday.c:15:5: warning:
symbol '__kernel_gettimeofday' was not declared. Should it be static?
arch/arm64/kernel/vdso/vgettimeofday.c:21:5: warning:
symbol '__kernel_clock_getres' was not declared. Should it be static?
Therefore, the declaration of the three functions is added to eliminate
these common warnings to provide a clean output.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230713115831.777-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In the restore path, swsusp_arch_suspend_exit uses copy_page() to
over-write memory. However, with features like KFENCE enabled, there could
be situations where it may have marked some pages as not valid, due to
which it could be reported as invalid accesses.
Consider a situation where page 'P' was part of the hibernation image.
Now, when the resume kernel tries to restore the pages, the same page 'P'
is already in use in the resume kernel and is kfence protected, due to
which its mapping is removed from linear map. Since restoring pages happens
with the resume kernel page tables, we would end up accessing 'P' during
copy and results in kernel pagefault.
The proposed fix tries to solve this issue by marking PTE as valid for such
kfence protected pages.
Co-developed-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Link: https://lore.kernel.org/r/20230713070757.4093-1-quic_nprakash@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
