| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ARM development updates from Russell King:
"Four changes for v6.4:
- simplify the path to the top vmlinux
- three patches to fix vfp with instrumentation enabled (eg lockdep)"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
ARM: 9293/1: vfp: Pass successful return address via register R3
ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
ARM: 9291/1: decompressor: simplify the path to the top vmlinux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
Commit 62b95a7b44d1 ("ARM: 9282/1: vfp: Manipulate task VFP state with
softirqs disabled") replaced the en/disable preemption calls inside the
VFP state handling code with en/disabling of soft IRQs, which is
necessary to allow kernel use of the VFP/SIMD unit when handling a soft
IRQ.
Unfortunately, when lockdep is enabled (or other instrumentation that
enables TRACE_IRQFLAGS), the disable path implemented in asm fails to
perform the lockdep and RCU related bookkeeping, resulting in spurious
warnings and other badness.
Set let's rework the VFP entry code a little bit so we can make the
local_bh_disable() call from C, with all the instrumentations that
happen to have been configured. Calling local_bh_enable() can be done
from asm, as it is a simple wrapper around __local_bh_enable_ip(), which
is always a callable function.
Link: https://lore.kernel.org/all/ZBBYCSZUJOWBg1s8@localhost.localdomain/
Fixes: 62b95a7b44d1 ("ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
In preparation for reimplementing the do_vfp()->vfp_support_entry()
handover in C code, switch to using R3 to pass the 'success' return
address, rather than R9, as it cannot be used for parameter passing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Instead of dereferencing thread_info in do_vfp, pass the thread_info
pointer to vfp_support_entry via R1. That way, we only use a single
caller save register, which makes it easier to convert do_vfp to C code
in a subsequent patch.
Note that, unlike the CPU number, which can change due to preemption,
passing the thread_info pointer can safely be done with preemption
enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
With commit 8debed3efe3a ("kbuild: export top-level LDFLAGS_vmlinux
only to scripts/Makefile.vmlinux") applied, we no longer see the error
message while building the ARM zImage, but we do not have a good reason
to complicate the file path either.
'$(obj)/../../../../vmlinux' is canonicalized to 'vmlinux'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.3, 2nd round:
- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
i.MX8 Verdin boards.
* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: imx8mp: fix address length for LCDIF2
Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb625 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.
Fixes: bd5880e10982 ("ARM: dts: colibri-imx6ull: Enable dual-role switching")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove unnecessary #address-cells/#size-cells to fix it.
Fixes: 9076cbaa7757 ("ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
files, and out of these, most are for the Qualcomm and NXP platforms,
including:
- A missing 'reserved-memory' property on LG G Watch R that is needed
to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the hardware
settings
- Firmware file names on multiple machines SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing:
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX 'weim' driver
- Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
the Arm scmi firmware driver"
* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
firmware: qcom: scm: fix bogus irq error at probe
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm ARM32 Devicetree fixes for v6.3
This introduces missing reserved-memory ranges on LG G Watch R,
resolving stability issues caused by Linux reusing memory used by
firmware.
* tag 'qcom-dts-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memory
Link: https://lore.kernel.org/r/20230323141922.1085875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull ARM fix from Russell King:
"Just one fix for now to eliminate a KASAN false positive"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9290/1: uaccess: Fix KASAN false-positives
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Turns out these two memory regions also need to be avoided, otherwise
weird things will happen when Linux tries to use this memory.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
|
|
Fix the address in the spdif node name.
Fixes: 874e568e500a ("ARM: dts: rockchip: Add SPDIF transceiver for RK3288")
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Link: https://lore.kernel.org/r/20230208091411.1603142-1-jay.xu@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
__copy_to_user_memcpy() and __clear_user_memset() had been calling
memcpy() and memset() respectively, leading to false-positive KASAN
reports when starting userspace:
[ 10.707901] Run /init as init process
[ 10.731892] process '/bin/busybox' started with executable stack
[ 10.745234] ==================================================================
[ 10.745796] BUG: KASAN: user-memory-access in __clear_user_memset+0x258/0x3ac
[ 10.747260] Write of size 2687 at addr 000de581 by task init/1
Use __memcpy() and __memset() instead to allow userspace access, which
is of course the intent of these functions.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Fixes for Samsung DTS ARM for v6.3
Thermal framework commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
* tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
Link: https://lore.kernel.org/r/20230221095337.9453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The compatible is st,stmpe-gpio.
Fixes: e2eb69183ec4 ("ARM: SPEAr320: DT: Add SPEAr 320 HMI board support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230225162237.40242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ADC sensor for the battery needs to be named "iio-hwmon" for
compatibility with user space applications.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com
Fixes: bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
Pull ARM udpates from Russell King:
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata
- Kconfig spelling and grammar fixes
- Allow kernel-mode VFP/Neon in softirq context
- Use Neon in softirq context
- Implement AES-CTR/GHASH version of GCM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
ARM: 9288/1: Kconfigs: fix spelling & grammar
ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
ARM: 9281/1: improve Cortex A8/A9 errata help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The majority of the changes are for the OMAP2 platform, mostly
removing some dead code that got left behind from previous cleanups.
Aside from that, there are very minor updates and correctness fixes
for Zynq, i.MX, Samsung, Broadcom, AT91, ep93xx, and OMAP1"
* tag 'arm-soc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
dt-bindings: soc: samsung: exynos-pmu: allow phys as child
ARM: imx: mach-imx6ul: add imx6ulz support
ARM: imx: Call ida_simple_remove() for ida_simple_get
arm64: drop redundant "ARMv8" from Kconfig option title
ARM: ep93xx: Convert to use descriptors for GPIO LEDs
ARM: s3c: fix s3c64xx_set_timer_source prototype
ARM: OMAP2+: Fix spelling typos in comment
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/machine.h>
ARM: OMAP2+: Remove unneeded #include <linux/pinctrl/pinmux.h>
ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init()
ARM: BCM63xx: remove useless goto statement
ARM: omap2: make functions static
ARM: omap2: remove unused omap2_pm_init
ARM: omap2: remove unused declarations
ARM: omap2: remove unused functions
ARM: omap2: smartreflex: remove on_init control
ARM: omap2: remove APLL control
ARM: omap2: simplify clock2xxx header
ARM: omap2: remove unused omap_hwmod_reset.c
ARM: omap2: remove unused headers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"The main change here is that I've broken out most of the file locking
definitions into a new header file. I also went ahead and completed
the removal of locks_inode function"
* tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs: remove locks_inode
filelock: move file locking definitions to separate header file
|
|
'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10
* tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
