summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2011-12-20Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds3-19/+139
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: SH73A0 external Ethernet fix ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 TPU LED platform data ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 PINT fix
2011-12-16Merge branch 'fixes' of ↵Linus Torvalds11-13/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: rx51: fix USB ARM: OMAP: mcbsp: Fix possible memory corruption arm/imx: fix power button on imx51 babbage board ARM: imx: fix cpufreq build errors ARM: mx5: add __initconst for fec pdata MXC PWM: should active during DOZE/WAIT/DBG mode ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 ARM: SAMSUNG: remove duplicated header include
2011-12-16Merge branch 'samsung-fixes-3' of ↵Olof Johansson3-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-12-16Merge branch 'fixes' of ↵Olof Johansson2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-12-16ARM: unwinder: fix bisection to find origin in .idx sectionUwe Kleine-König1-2/+2
The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-14ARM: OMAP: rx51: fix USBFelipe Contreras1-1/+1
Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-13Merge branch 'fixes' of ↵Linus Torvalds5-66/+99
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs ARM: 7187/1: fix unwinding for XIP kernels ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU
2011-12-13Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann6-5/+11
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-12-12ARM: OMAP: mcbsp: Fix possible memory corruptionJarkko Nikula1-3/+3
Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-12ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlierArnaud Patard1-6/+6
arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-09Merge branch 'iommu/fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: MAINTAINERS: Update amd-iommu F: patterns iommu/amd: Fix typo in kernel-parameters.txt iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix comparison using wrong pointer variable in dma debug code
2011-12-09arm/imx: fix power button on imx51 babbage boardShawn Guo1-1/+1
Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09ARM: imx: fix cpufreq build errorsRichard Zhao1-0/+1
CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09ARM: mx5: add __initconst for fec pdataDong Aisheng3-3/+3
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-09MXC PWM: should active during DOZE/WAIT/DBG modeJason Chen1-1/+6
Signed-off-by: Jason Chen <jason.chen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@kernel.org
2011-12-09Merge branch 'fixes' of ↵Linus Torvalds28-55/+69
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: sa1100: fix build error ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram ARM: davinci: dm365 evm: align nand partition table to u-boot ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode ARM: davinci: dm646x does not have a DSP domain ARM: davinci: psc: fix incorrect offsets ARM: davinci: psc: fix incorrect mask ARM: mx28: LRADC macro rename arm: mx23: recognise stmp378x as mx23 ARM: mxs: fix machines' initializers order ARM: mxs/tx28: add __initconst for fec pdata ARM: S3C64XX: Staticise s3c6400_sysclass ARM: S3C64XX: Add linux/export.h to dev-spi.c ARM: S3C64XX: Remove extern from definition of framebuffer setup call MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers MAINTAINERS: Add linux-samsung-soc mailing list for Samsung MAINTAINERS: Consolidate Samsung MAINTAINERS ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' ARM: CSR: fix build error due to new mdesc->dma_zone_size ...
2011-12-08Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesArnd Bergmann1-2/+2
2011-12-08ARM: sa1100: fix build errorJett.Zhou1-2/+2
arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
2011-12-08Merge branch 'fixes' of ↵Olof Johansson2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-12-08ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERSKukjin Kim1-2/+5
arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
2011-12-08ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleepAmit Daniel Kachhap1-1/+5
This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org> Tested-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-08ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210Jingoo Han1-0/+1
The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-08ARM: SAMSUNG: remove duplicated header includeJingoo Han1-1/+0
This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-07Merge branch 'samsung-fixes-2' of ↵Arnd Bergmann3-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-12-06Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Arnd Bergmann6-16/+18
fixes
2011-12-06Merge branch 'mxs/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann5-6/+7
into fixes
2011-12-06Merge branch 'fixes' of ↵Arnd Bergmann2-0/+2
git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into fixes
2011-12-06Merge branch 'imx/fix-irqdomain' of ↵Arnd Bergmann3-14/+19
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
2011-12-06Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann6-8/+8
2011-12-06ARM: 7185/1: perf: don't assign platform_device on unsupported CPUsWill Deacon1-0/+3
In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06ARM: 7187/1: fix unwinding for XIP kernelsUwe Kleine-König3-59/+88
The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMUNicolas Pitre1-1/+2
Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of <mach/memory.h> files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06iommu/msm: Fix compile error in mach-msm/devices-iommu.cJoerg Roedel1-0/+1
Fix compile error due to missing <linux/module.h> include. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-12-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix loss of notification with multi-event perf, x86: Force IBS LVT offset assignment for family 10h perf, x86: Disable PEBS on SandyBridge chips trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter perf session: Fix crash with invalid CPU list perf python: Fix undefined symbol problem perf/x86: Enable raw event access to Intel offcore events perf: Don't use -ENOSPC for out of PMU resources perf: Do not set task_ctx pointer in cpuctx if there are no events in the context perf/x86: Fix PEBS instruction unwind oprofile, x86: Fix crash when unloading module (nmi timer mode) oprofile: Fix crash when unloading module (hr timer mode)
2011-12-05ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogramJanusz Krzysztofik1-1/+6
Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-05ARM: davinci: dm365 evm: align nand partition table to u-bootShankarmurthy,Akshay1-1/+1
Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay <akshay.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-05ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0Manjunathappa, Prakash1-1/+1
On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: <stable@vger.kernel.org> # v2.6.36.x and above
2011-12-05ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_modeHans Verkuil1-3/+3
The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Cc: stable@kernel.org
2011-12-05ARM: davinci: dm646x does not have a DSP domainSekhar Nori1-1/+0
Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-05ARM: davinci: psc: fix incorrect offsetsMurali Karicheri2-9/+11
Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-05ARM: davinci: psc: fix incorrect maskMurali Karicheri2-1/+2
There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-12-02ARM: mx28: LRADC macro renamePeter Rusko1-2/+2
It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko <rusko.peter@prolan.hu> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-02arm: mx23: recognise stmp378x as mx23Wolfram Sang1-0/+1
Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable@kernel.org
2011-12-02ARM: mxs: fix machines' initializers orderLauri Hintsala2-2/+2
Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-02ARM: mxs/tx28: add __initconst for fec pdataDong Aisheng1-2/+2
Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-02ARM: S3C64XX: Staticise s3c6400_sysclassMark Brown1-1/+1
The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-02ARM: S3C64XX: Add linux/export.h to dev-spi.cMark Brown1-0/+1
This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-02ARM: S3C64XX: Remove extern from definition of framebuffer setup callMark Brown1-1/+1
The extern is only useful on prototypes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-02ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE'Barry Song1-0/+1
In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song <baohua.song@csr.com>
2011-12-02ARM: CSR: fix build error due to new mdesc->dma_zone_sizeBarry Song1-0/+1
commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song <baohua.song@csr.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-21 12:47:39 +0300