summaryrefslogtreecommitdiff
path: root/arch/loongarch
AgeCommit message (Collapse)AuthorFilesLines
2024-03-22Merge tag 'loongarch-6.9' of ↵Linus Torvalds43-67/+921
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Add objtool support for LoongArch - Add ORC stack unwinder support for LoongArch - Add kernel livepatching support for LoongArch - Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig - Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig - Some bug fixes and other small changes * tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch/crypto: Clean up useless assignment operations LoongArch: Define the __io_aw() hook as mmiowb() LoongArch: Remove superfluous flush_dcache_page() definition LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h LoongArch: Change __my_cpu_offset definition to avoid mis-optimization LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig LoongArch: Add kernel livepatching support LoongArch: Add ORC stack unwinder support objtool: Check local label in read_unwind_hints() objtool: Check local label in add_dead_ends() objtool/LoongArch: Enable orc to be built objtool/x86: Separate arch-specific and generic parts objtool/LoongArch: Implement instruction decoder objtool/LoongArch: Enable objtool to be built
2024-03-19LoongArch/crypto: Clean up useless assignment operationsYuli Wang1-2/+0
The LoongArch CRC32 hw acceleration is based on arch/mips/crypto/ crc32-mips.c. While the MIPS code supports both MIPS32 and MIPS64, but LoongArch32 lacks the CRC instruction. As a result, the line "len -= sizeof(u32)" is unnecessary. Removing it can make context code style more unified and improve code readability. Cc: stable@vger.kernel.org Reviewed-by: WANG Xuerui <git@xen0n.name> Suggested-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Define the __io_aw() hook as mmiowb()Huacai Chen3-18/+3
Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock. We can add mmiowb() calls in the radeon driver but the maintainer says he doesn't like such a workaround, and radeon is not the only example of mutex protected mmio. So we should extend the mmiowb tracking system from spinlock to mutex, and maybe other locking primitives. This is not easy and error prone, so we solve it in the architectural code, by simply defining the __io_aw() hook as mmiowb(). And we no longer need to override queued_spin_unlock() so use the generic definition. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) Link: https://lore.kernel.org/dri-devel/29df7e26-d7a8-4f67-b988-44353c4270ac@amd.com/T/#t Link: https://lore.kernel.org/linux-arch/20240301130532.3953167-1-chenhuacai@loongson.cn/T/#t Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Remove superfluous flush_dcache_page() definitionHuacai Chen1-3/+0
LoongArch doesn't have cache aliases, so flush_dcache_page() is a no-op. There is a generic implementation for this case in include/asm-generic/ cacheflush.h. So remove the superfluous flush_dcache_page() definition, which also silences such build warnings: In file included from crypto/scompress.c:12: include/crypto/scatterwalk.h: In function 'scatterwalk_pagedone': include/crypto/scatterwalk.h:76:30: warning: variable 'page' set but not used [-Wunused-but-set-variable] 76 | struct page *page; | ^~~~ crypto/scompress.c: In function 'scomp_acomp_comp_decomp': >> crypto/scompress.c:174:38: warning: unused variable 'dst_page' [-Wunused-variable] 174 | struct page *dst_page = sg_page(req->dst); | Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403091614.NeUw5zcv-lkp@intel.com/ Suggested-by: Barry Song <baohua@kernel.org> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.hMax Kellermann2-3/+3
These two functions are implemented in pgtable.c, and they are needed only by the virt_to_page() macro in page.h. Having the prototypes in pgtable.h causes a circular dependency between page.h and pgtable.h, because the virt_to_page() macro in page.h needs pgtable.h for these two functions, while pgtable.h needs various definitions from page.h (e.g. pte_t and pgt_t). Let's avoid this circular dependency by moving the function prototypes to page.h. Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Change __my_cpu_offset definition to avoid mis-optimizationHuacai Chen1-1/+6
From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of global regs in asms"), global registers will no longer be forced to add to the def-use chain. Then current_thread_info(), current_stack_pointer and __my_cpu_offset may be lifted out of the loop because they are no longer treated as "volatile variables". This optimization is still correct for the current_thread_info() and current_stack_pointer usages because they are associated to a thread. However it is wrong for __my_cpu_offset because it is associated to a CPU rather than a thread: if the thread migrates to a different CPU in the loop, __my_cpu_offset should be changed. Change __my_cpu_offset definition to treat it as a "volatile variable", in order to avoid such a mis-optimization. Cc: stable@vger.kernel.org Reported-by: Xiaotian Wu <wuxiaotian@loongson.cn> Reported-by: Miao Wang <shankerwangmiao@gmail.com> Signed-off-by: Xing Li <lixing@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in KconfigHuacai Chen1-0/+1
This allocates the VM flag needed to support the userfaultfd minor fault functionality. See commit 7677f7fd8be7665 ("userfaultfd: add minor fault registration mode") for more information. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-19LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in KconfigHuacai Chen1-0/+1
LoongArch has implemented the current_stack_pointer macro, so select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig. This will let it be used in non-arch places (like HARDENED_USERCOPY). Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-50/+37
Pull kvm updates from Paolo Bonzini: "S390: - Changes to FPU handling came in via the main s390 pull request - Only deliver to the guest the SCLP events that userspace has requested - More virtual vs physical address fixes (only a cleanup since virtual and physical address spaces are currently the same) - Fix selftests undefined behavior x86: - Fix a restriction that the guest can't program a PMU event whose encoding matches an architectural event that isn't included in the guest CPUID. The enumeration of an architectural event only says that if a CPU supports an architectural event, then the event can be programmed *using the architectural encoding*. The enumeration does NOT say anything about the encoding when the CPU doesn't report support the event *in general*. It might support it, and it might support it using the same encoding that made it into the architectural PMU spec - Fix a variety of bugs in KVM's emulation of RDPMC (more details on individual commits) and add a selftest to verify KVM correctly emulates RDMPC, counter availability, and a variety of other PMC-related behaviors that depend on guest CPUID and therefore are easier to validate with selftests than with custom guests (aka kvm-unit-tests) - Zero out PMU state on AMD if the virtual PMU is disabled, it does not cause any bug but it wastes time in various cases where KVM would check if a PMC event needs to be synthesized - Optimize triggering of emulated events, with a nice ~10% performance improvement in VM-Exit microbenchmarks when a vPMU is exposed to the guest - Tighten the check for "PMI in guest" to reduce false positives if an NMI arrives in the host while KVM is handling an IRQ VM-Exit - Fix a bug where KVM would report stale/bogus exit qualification information when exiting to userspace with an internal error exit code - Add a VMX flag in /proc/cpuinfo to report 5-level EPT support - Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for read, e.g. to avoid serializing vCPUs when userspace deletes a memslot - Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM doesn't support yielding in the middle of processing a zap, and 1GiB granularity resulted in multi-millisecond lags that are quite impolite for CONFIG_PREEMPT kernels - Allocate write-tracking metadata on-demand to avoid the memory overhead when a kernel is built with i915 virtualization support but the workloads use neither shadow paging nor i915 virtualization - Explicitly initialize a variety of on-stack variables in the emulator that triggered KMSAN false positives - Fix the debugregs ABI for 32-bit KVM - Rework the "force immediate exit" code so that vendor code ultimately decides how and when to force the exit, which allowed some optimization for both Intel and AMD - Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if vCPU creation ultimately failed, causing extra unnecessary work - Cleanup the logic for checking if the currently loaded vCPU is in-kernel - Harden against underflowing the active mmu_notifier invalidation count, so that "bad" invalidations (usually due to bugs elsehwere in the kernel) are detected earlier and are less likely to hang the kernel x86 Xen emulation: - Overlay pages can now be cached based on host virtual address, instead of guest physical addresses. This removes the need to reconfigure and invalidate the cache if the guest changes the gpa but the underlying host virtual address remains the same - When possible, use a single host TSC value when computing the deadline for Xen timers in order to improve the accuracy of the timer emulation - Inject pending upcall events when the vCPU software-enables its APIC to fix a bug where an upcall can be lost (and to follow Xen's behavior) - Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen events fails, e.g. if the guest has aliased xAPIC IDs RISC-V: - Support exception and interrupt handling in selftests - New self test for RISC-V architectural timer (Sstc extension) - New extension support (Ztso, Zacas) - Support userspace emulation of random number seed CSRs ARM: - Infrastructure for building KVM's trap configuration based on the architectural features (or lack thereof) advertised in the VM's ID registers - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to x86's WC) at stage-2, improving the performance of interacting with assigned devices that can tolerate it - Conversion of KVM's representation of LPIs to an xarray, utilized to address serialization some of the serialization on the LPI injection path - Support for _architectural_ VHE-only systems, advertised through the absence of FEAT_E2H0 in the CPU's ID register - Miscellaneous cleanups, fixes, and spelling corrections to KVM and selftests LoongArch: - Set reserved bits as zero in CPUCFG - Start SW timer only when vcpu is blocking - Do not restart SW timer when it is expired - Remove unnecessary CSR register saving during enter guest - Misc cleanups and fixes as usual Generic: - Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically always true on all architectures except MIPS (where Kconfig determines the available depending on CPU capabilities). It is replaced either by an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM) everywhere else - Factor common "select" statements in common code instead of requiring each architecture to specify it - Remove thoroughly obsolete APIs from the uapi headers - Move architecture-dependent stuff to uapi/asm/kvm.h - Always flush the async page fault workqueue when a work item is being removed, especially during vCPU destruction, to ensure that there are no workers running in KVM code when all references to KVM-the-module are gone, i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded - Grab a reference to the VM's mm_struct in the async #PF worker itself instead of gifting the worker a reference, so that there's no need to remember to *conditionally* clean up after the worker Selftests: - Reduce boilerplate especially when utilize selftest TAP infrastructure - Add basic smoke tests for SEV and SEV-ES, along with a pile of library support for handling private/encrypted/protected memory - Fix benign bugs where tests neglect to close() guest_memfd files" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits) selftests: kvm: remove meaningless assignments in Makefiles KVM: riscv: selftests: Add Zacas extension to get-reg-list test RISC-V: KVM: Allow Zacas extension for Guest/VM KVM: riscv: selftests: Add Ztso extension to get-reg-list test RISC-V: KVM: Allow Ztso extension for Guest/VM RISC-V: KVM: Forward SEED CSR access to user space KVM: riscv: selftests: Add sstc timer test KVM: riscv: selftests: Change vcpu_has_ext to a common function KVM: riscv: selftests: Add guest helper to get vcpu id KVM: riscv: selftests: Add exception handling support LoongArch: KVM: Remove unnecessary CSR register saving during enter guest LoongArch: KVM: Do not restart SW timer when it is expired LoongArch: KVM: Start SW timer only when vcpu is blocking LoongArch: KVM: Set reserved bits as zero in CPUCFG KVM: selftests: Explicitly close guest_memfd files in some gmem tests KVM: x86/xen: fix recursive deadlock in timer injection KVM: pfncache: simplify locking and make more self-contained KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled KVM: x86/xen: improve accuracy of Xen timers ...
2024-03-15Merge tag 'mm-stable-2024-03-13-20-04' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames from hotplugged memory rather than only from main memory. Series "implement "memmap on memory" feature on s390". - More folio conversions from Matthew Wilcox in the series "Convert memcontrol charge moving to use folios" "mm: convert mm counter to take a folio" - Chengming Zhou has optimized zswap's rbtree locking, providing significant reductions in system time and modest but measurable reductions in overall runtimes. The series is "mm/zswap: optimize the scalability of zswap rb-tree". - Chengming Zhou has also provided the series "mm/zswap: optimize zswap lru list" which provides measurable runtime benefits in some swap-intensive situations. - And Chengming Zhou further optimizes zswap in the series "mm/zswap: optimize for dynamic zswap_pools". Measured improvements are modest. - zswap cleanups and simplifications from Yosry Ahmed in the series "mm: zswap: simplify zswap_swapoff()". - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has contributed several DAX cleanups as well as adding a sysfs tunable to control the memmap_on_memory setting when the dax device is hotplugged as system memory. - Johannes Weiner has added the large series "mm: zswap: cleanups", which does that. - More DAMON work from SeongJae Park in the series "mm/damon: make DAMON debugfs interface deprecation unignorable" "selftests/damon: add more tests for core functionalities and corner cases" "Docs/mm/damon: misc readability improvements" "mm/damon: let DAMOS feeds and tame/auto-tune itself" - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs extension" Rakie Kim has developed a new mempolicy interleaving policy wherein we allocate memory across nodes in a weighted fashion rather than uniformly. This is beneficial in heterogeneous memory environments appearing with CXL. - Christophe Leroy has contributed some cleanup and consolidation work against the ARM pagetable dumping code in the series "mm: ptdump: Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute". - Luis Chamberlain has added some additional xarray selftesting in the series "test_xarray: advanced API multi-index tests". - Muhammad Usama Anjum has reworked the selftest code to make its human-readable output conform to the TAP ("Test Anything Protocol") format. Amongst other things, this opens up the use of third-party tools to parse and process out selftesting results. - Ryan Roberts has added fork()-time PTE batching of THP ptes in the series "mm/memory: optimize fork() with PTE-mapped THP". Mainly targeted at arm64, this significantly speeds up fork() when the process has a large number of pte-mapped folios. - David Hildenbrand also gets in on the THP pte batching game in his series "mm/memory: optimize unmap/zap with PTE-mapped THP". It implements batching during munmap() and other pte teardown situations. The microbenchmark improvements are nice. - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte mappings"). Kernel build times on arm64 improved nicely. Ryan's series "Address some contpte nits" provides some followup work. - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has fixed an obscure hugetlb race which was causing unnecessary page faults. He has also added a reproducer under the selftest code. - In the series "selftests/mm: Output cleanups for the compaction test", Mark Brown did what the title claims. - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring". - Even more zswap material from Nhat Pham. The series "fix and extend zswap kselftests" does as claimed. - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in our handling of DAX on archiecctures which have virtually aliasing data caches. The arm architecture is the main beneficiary. - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic improvements in worst-case mmap_lock hold times during certain userfaultfd operations. - Some page_owner enhancements and maintenance work from Oscar Salvador in his series "page_owner: print stacks and their outstanding allocations" "page_owner: Fixup and cleanup" - Uladzislau Rezki has contributed some vmalloc scalability improvements in his series "Mitigate a vmap lock contention". It realizes a 12x improvement for a certain microbenchmark. - Some kexec/crash cleanup work from Baoquan He in the series "Split crash out from kexec and clean up related config items". - Some zsmalloc maintenance work from Chengming Zhou in the series "mm/zsmalloc: fix and optimize objects/page migration" "mm/zsmalloc: some cleanup for get/set_zspage_mapping()" - Zi Yan has taught the MM to perform compaction on folios larger than order=0. This a step along the path to implementaton of the merging of large anonymous folios. The series is named "Enable >0 order folio memory compaction". - Christoph Hellwig has done quite a lot of cleanup work in the pagecache writeback code in his series "convert write_cache_pages() to an iterator". - Some modest hugetlb cleanups and speedups in Vishal Moola's series "Handle hugetlb faults under the VMA lock". - Zi Yan has changed the page splitting code so we can split huge pages into sizes other than order-0 to better utilize large folios. The series is named "Split a folio to any lower order folios". - David Hildenbrand has contributed the series "mm: remove total_mapcount()", a cleanup. - Matthew Wilcox has sought to improve the performance of bulk memory freeing in his series "Rearrange batched folio freeing". - Gang Li's series "hugetlb: parallelize hugetlb page init on boot" provides large improvements in bootup times on large machines which are configured to use large numbers of hugetlb pages. - Matthew Wilcox's series "PageFlags cleanups" does that. - Qi Zheng's series "minor fixes and supplement for ptdesc" does that also. S390 is affected. - Cleanups to our pagemap utility functions from Peter Xu in his series "mm/treewide: Replace pXd_large() with pXd_leaf()". - Nico Pache has fixed a few things with our hugepage selftests in his series "selftests/mm: Improve Hugepage Test Handling in MM Selftests". - Also, of course, many singleton patches to many things. Please see the individual changelogs for details. * tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits) mm/zswap: remove the memcpy if acomp is not sleepable crypto: introduce: acomp_is_async to expose if comp drivers might sleep memtest: use {READ,WRITE}_ONCE in memory scanning mm: prohibit the last subpage from reusing the entire large folio mm: recover pud_leaf() definitions in nopmd case selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements selftests/mm: skip uffd hugetlb tests with insufficient hugepages selftests/mm: dont fail testsuite due to a lack of hugepages mm/huge_memory: skip invalid debugfs new_order input for folio split mm/huge_memory: check new folio order when split a folio mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure mm: add an explicit smp_wmb() to UFFDIO_CONTINUE mm: fix list corruption in put_pages_list mm: remove folio from deferred split list before uncharging it filemap: avoid unnecessary major faults in filemap_fault() mm,page_owner: drop unnecessary check mm,page_owner: check for null stack_record before bumping its refcount mm: swap: fix race between free_swap_and_cache() and swapoff() mm/treewide: align up pXd_leaf() retval across archs mm/treewide: drop pXd_large() ...
2024-03-15Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The major features are support for LPA2 (52-bit VA/PA with 4K and 16K pages), the dpISA extension and Rust enabled on arm64. The changes are mostly contained within the usual arch/arm64/, drivers/perf, the arm64 Documentation and kselftests. The exception is the Rust support which touches some generic build files. Summary: - Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages - Enable Rust on arm64 - Support for the 2023 dpISA extensions (data processing ISA), host only - arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() - Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits) Revert "mm: add arch hook to validate mmap() prot flags" Revert "arm64: mm: add support for WXN memory translation attribute" Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512" ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512 kselftest/arm64: Add 2023 DPISA hwcap test coverage kselftest/arm64: Add basic FPMR test kselftest/arm64: Handle FPMR context in generic signal frame parser arm64/hwcap: Define hwcaps for 2023 DPISA features arm64/ptrace: Expose FPMR via ptrace arm64/signal: Add FPMR signal handling arm64/fpsimd: Support FEAT_FPMR arm64/fpsimd: Enable host kernel access to FPMR arm64/cpufeature: Hook new identification registers up to cpufeature docs: perf: Fix build warning of hisi-pcie-pmu.rst perf: starfive: Only allow COMPILE_TEST for 64-bit architectures MAINTAINERS: Add entry for StarFive StarLink PMU docs: perf: Add description for StarFive's StarLink PMU dt-bindings: perf: starfive: Add JH8100 StarLink PMU perf: starfive: Add StarLink PMU support docs: perf: Update usage for target filter of hisi-pcie-pmu ...
2024-03-13Merge tag 'net-next-6.9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Large effort by Eric to lower rtnl_lock pressure and remove locks: - Make commonly used parts of rtnetlink (address, route dumps etc) lockless, protected by RCU instead of rtnl_lock. - Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback. - Remove locks / serialization in the socket diag interface. - Remove 6 calls to synchronize_rcu() while holding rtnl_lock. - Remove the dev_base_lock, depend on RCU where necessary. - Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults. - Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible. - Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems. - Support TCP_NOTSENT_LOWAT in MPTCP. - Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec. - Support forwarding of ICMP Error messages in IPSec, per RFC 4301. - Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine. - Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks. - Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc. - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets. - Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths). - Speed up scanning for expired routes by keeping a dedicated list. - Speed up "generic" XDP by trying harder to avoid large allocations. - Support attaching arbitrary metadata to netconsole messages. Things we sprinkled into general kernel code: - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena). - Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass). Netfilter: - Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership. - Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures. BPF: - Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. - Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs. - Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it. - Extend the BPF verifier to enable static subprog calls in spin lock critical sections. - Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type. - Add support for retrieval of cookies for perf/kprobe multi links. - Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls. - Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects. Wireless: - Add SPP (signaling and payload protected) AMSDU support. - Support wider bandwidth OFDMA, as required for EHT operation. Driver API: - Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers. - Define an API for querying per netdev queue statistics from drivers. - IPSec: account in global stats for fully offloaded sessions. - Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code. - Enable Rx hashing (RSS) on GTP protocol fields. Misc: - Improvements and refactoring all over networking selftests. - Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies. - Address all missing MODULE_DESCRIPTION() warnings in networking. - Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type". Drivers: - Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues - Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support - Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch - PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva. - CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx - WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro" * tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits) nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y nexthop: Fix out-of-bounds access during attribute validation nexthop: Only parse NHA_OP_FLAGS for dump messages that require it nexthop: Only parse NHA_OP_FLAGS for get messages that require it bpf: move sleepable flag from bpf_prog_aux to bpf_prog bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() selftests/bpf: Add kprobe multi triggering benchmarks ptp: Move from simple ida to xarray vxlan: Remove generic .ndo_get_stats64 vxlan: Do not alloc tstats manually devlink: Add comments to use netlink gen tool nfp: flower: handle acti_netdevs allocation failure net/packet: Add getsockopt support for PACKET_COPY_THRESH net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID selftests/bpf: Add bpf_arena_htab test. selftests/bpf: Add bpf_arena_list test. selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages bpf: Add helper macro bpf_addr_space_cast() libbpf: Recognize __arena global variables. bpftool: Recognize arena map type ...
2024-03-12Merge tag 'asm-generic-6.9' of ↵Linus Torvalds2-24/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Just two small updates this time: - A series I did to unify the definition of PAGE_SIZE through Kconfig, intended to help with a vdso rework that needs the constant but cannot include the normal kernel headers when building the compat VDSO on arm64 and potentially others - a patch from Yan Zhao to remove the pfn_to_virt() definitions from a couple of architectures after finding they were both incorrect and entirely unused" * tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: define CONFIG_PAGE_SIZE_*KB on all architectures arch: simplify architecture specific page size configuration arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
2024-03-12Merge tag 'timers-core-2024-03-10' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A large set of updates and features for timers and timekeeping: - The hierarchical timer pull model When timer wheel timers are armed they are placed into the timer wheel of a CPU which is likely to be busy at the time of expiry. This is done to avoid wakeups on potentially idle CPUs. This is wrong in several aspects: 1) The heuristics to select the target CPU are wrong by definition as the chance to get the prediction right is close to zero. 2) Due to #1 it is possible that timers are accumulated on a single target CPU 3) The required computation in the enqueue path is just overhead for dubious value especially under the consideration that the vast majority of timer wheel timers are either canceled or rearmed before they expire. The timer pull model avoids the above by removing the target computation on enqueue and queueing timers always on the CPU on which they get armed. This is achieved by having separate wheels for CPU pinned timers and global timers which do not care about where they expire. As long as a CPU is busy it handles both the pinned and the global timers which are queued on the CPU local timer wheels. When a CPU goes idle it evaluates its own timer wheels: - If the first expiring timer is a pinned timer, then the global timers can be ignored as the CPU will wake up before they expire. - If the first expiring timer is a global timer, then the expiry time is propagated into the timer pull hierarchy and the CPU makes sure to wake up for the first pinned timer. The timer pull hierarchy organizes CPUs in groups of eight at the lowest level and at the next levels groups of eight groups up to the point where no further aggregation of groups is required, i.e. the number of levels is log8(NR_CPUS). The magic number of eight has been established by experimention, but can be adjusted if needed. In each group one busy CPU acts as the migrator. It's only one CPU to avoid lock contention on remote timer wheels. The migrator CPU checks in its own timer wheel handling whether there are other CPUs in the group which have gone idle and have global timers to expire. If there are global timers to expire, the migrator locks the remote CPU timer wheel and handles the expiry. Depending on the group level in the hierarchy this handling can require to walk the hierarchy downwards to the CPU level. Special care is taken when the last CPU goes idle. At this point the CPU is the systemwide migrator at the top of the hierarchy and it therefore cannot delegate to the hierarchy. It needs to arm its own timer device to expire either at the first expiring timer in the hierarchy or at the first CPU local timer, which ever expires first. This completely removes the overhead from the enqueue path, which is e.g. for networking a true hotpath and trades it for a slightly more complex idle path. This has been in development for a couple of years and the final series has been extensively tested by various teams from silicon vendors and ran through extensive CI. There have been slight performance improvements observed on network centric workloads and an Intel team confirmed that this allows them to power down a die completely on a mult-die socket for the first time in a mostly idle scenario. There is only one outstanding ~1.5% regression on a specific overloaded netperf test which is currently investigated, but the rest is either positive or neutral performance wise and positive on the power management side. - Fixes for the timekeeping interpolation code for cross-timestamps: cross-timestamps are used for PTP to get snapshots from hardware timers and interpolated them back to clock MONOTONIC. The changes address a few corner cases in the interpolation code which got the math and logic wrong. - Simplifcation of the clocksource watchdog retry logic to automatically adjust to handle larger systems correctly instead of having more incomprehensible command line parameters. - Treewide consolidation of the VDSO data structures. - The usual small improvements and cleanups all over the place" * tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) timer/migration: Fix quick check reporting late expiry tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n vdso/datapage: Quick fix - use asm/page-def.h for ARM64 timers: Assert no next dyntick timer look-up while CPU is offline tick: Assume timekeeping is correctly handed over upon last offline idle call tick: Shut down low-res tick from dying CPU tick: Split nohz and highres features from nohz_mode tick: Move individual bit features to debuggable mask accesses tick: Move got_idle_tick away from common flags tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING tick: Move tick cancellation up to CPUHP_AP_TICK_DYING tick: Start centralizing tick related CPU hotplug operations tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick() tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick() tick: Use IS_ENABLED() whenever possible tick/sched: Remove useless oneshot ifdeffery tick/nohz: Remove duplicate between lowres and highres handlers tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer() hrtimer: Select housekeeping CPU during migration ...
2024-03-11mm: Introduce vmap_page_range() to map pages in PCI address spaceAlexei Starovoitov1-1/+1
ioremap_page_range() should be used for ranges within vmalloc range only. The vmalloc ranges are allocated by get_vm_area(). PCI has "resource" allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence introduce vmap_page_range() to be used exclusively to map pages in PCI address space. Fixes: 3e49a866c9dc ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.") Reported-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com
2024-03-11LoongArch: Add kernel livepatching supportJinyang He3-0/+46
The arch-specified function ftrace_regs_set_instruction_pointer() has been implemented in arch/loongarch/include/asm/ftrace.h, so here only implement arch_stack_walk_reliable() function. Here are the test logs: [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# modprobe livepatch-sample [root@linux fedora]# cat /proc/cmdline this has been live patched [root@linux fedora]# echo 0 > /sys/kernel/livepatch/livepatch_sample/enabled [root@linux fedora]# rmmod livepatch_sample [root@linux fedora]# cat /proc/cmdline BOOT_IMAGE=/vmlinuz-6.8.0-rc2 root=/dev/sda3 [root@linux fedora]# dmesg -t | tail -5 livepatch: enabling patch 'livepatch_sample' livepatch: 'livepatch_sample': starting patching transition livepatch: 'livepatch_sample': patching complete livepatch: 'livepatch_sample': starting unpatching transition livepatch: 'livepatch_sample': unpatching complete Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-11LoongArch: Add ORC stack unwinder supportTiezhu Yang35-40/+861
The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is similar in concept to a DWARF unwinder. The difference is that the format of the ORC data is much simpler than DWARF, which in turn allows the ORC unwinder to be much simpler and faster. The ORC data consists of unwind tables which are generated by objtool. After analyzing all the code paths of a .o file, it determines information about the stack state at each instruction address in the file and outputs that information to the .orc_unwind and .orc_unwind_ip sections. The per-object ORC sections are combined at link time and are sorted and post-processed at boot time. The unwinder uses the resulting data to correlate instruction addresses with their stack states at run time. Most of the logic are similar with x86, in order to get ra info before ra is saved into stack, add ra_reg and ra_offset into orc_entry. At the same time, modify some arch-specific code to silence the objtool warnings. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-11Merge tag 'loongarch-kvm-6.9' of ↵Paolo Bonzini7-140/+145
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.9 * Set reserved bits as zero in CPUCFG. * Start SW timer only when vcpu is blocking. * Do not restart SW timer when it is expired. * Remove unnecessary CSR register saving during enter guest.
2024-03-09Merge tag 'kvm-x86-guest_memfd_fixes-6.8' of ↵Paolo Bonzini1-2/+2
https://github.com/kvm-x86/linux into HEAD KVM GUEST_MEMFD fixes for 6.8: - Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to avoid creating ABI that KVM can't sanely support. - Update documentation for KVM_SW_PROTECTED_VM to make it abundantly clear that such VMs are purely a development and testing vehicle, and come with zero guarantees. - Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan is to support confidential VMs with deterministic private memory (SNP and TDX) only in the TDP MMU. - Fix a bug in a GUEST_MEMFD negative test that resulted in false passes when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
2024-03-07mm/treewide: drop pXd_large()Peter Xu1-1/+1
They're not used anymore, drop all of them. Link: https://lkml.kernel.org/r/20240305043750.93762-10-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitionsArnd Bergmann2-24/+7
These four architectures define the same Kconfig symbols for configuring the page size. Move the logic into a common place where it can be shared with all other architectures. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-06LoongArch: KVM: Remove unnecessary CSR register saving during enter guestBibo Mao1-6/+0
Some CSR registers like CRMD/PRMD are saved during enter VM mode now. However they are not restored for actual use, so saving for these CSR registers can be removed. Reviewed-by: Tianrui Zhao <zhaotianrui@loongson.cn> Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-06LoongArch: KVM: Do not restart SW timer when it is expiredBibo Mao1-19/+1
LoongArch VCPUs have their own separate HW timers. SW timer is to wake up blocked vcpu thread, rather than HW timer emulation. When blocking vcpu scheduled out, SW timer is used to wakeup blocked vcpu thread and injects timer interrupt. It does not care about whether guest timer is in period mode or oneshot mode, and SW timer needs not to be restarted since vcpu has been woken. This patch does not restart SW timer when it is expired. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-06LoongArch: KVM: Start SW timer only when vcpu is blockingBibo Mao1-14/+9
SW timer is enabled when vcpu thread is scheduled out, and it is to wake up vcpu from blocked queue. If vcpu thread is scheduled out but is not blocked, such as it is preempted by other threads, it is not necessary to enable SW timer. Since vcpu thread is still on running queue if it is preempted and SW timer is only to wake up vcpu on blocking queue, so SW timer is not useful in this situation. This patch enables SW timer only when vcpu is scheduled out and is blocking. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-06LoongArch: KVM: Set reserved bits as zero in CPUCFGBibo Mao1-7/+26
Supported CPUCFG information comes from function _kvm_get_cpucfg_mask(). A bit should be zero if it is reserved by HW or if it is not supported by KVM. Also LoongArch software page table walk feature defined in CPUCFG2_LSPW is supported by KVM, it should be enabled by default. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-24loongarch, crash: wrap crash dumping code into crash related ifdefsBaoquan He1-1/+1
Now crash codes under kernel/ folder has been split out from kexec code, crash dumping can be separated from kexec reboot in config items on loongarch with some adjustments. Here use IS_ENABLED(CONFIG_CRASH_RESERVE) check to decide if compiling in the crashkernel reservation code. Link: https://lkml.kernel.org/r/20240124051254.67105-15-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-23LoongArch: KVM: Streamline kvm_check_cpucfg() and improve commentsWANG Xuerui1-22/+20
All the checks currently done in kvm_check_cpucfg can be realized with early returns, so just do that to avoid extra cognitive burden related to the return value handling. While at it, clean up comments of _kvm_get_cpucfg_mask() and kvm_check_cpucfg(), by removing comments that are merely restatement of the code nearby, and paraphrasing the rest so they read more natural for English speakers (that likely are not familiar with the actual Chinese- influenced grammar). No functional changes intended. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()WANG Xuerui1-3/+3
The function is not actually a getter of guest CPUCFG, but rather validation of the input CPUCFG ID plus information about the supported bit flags of that CPUCFG leaf. So rename it to avoid confusion. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()WANG Xuerui1-17/+18
The range check for the CPUCFG ID is wrong (should have been a || instead of &&) and useless in effect, so fix the obvious mistake. Furthermore, the juggling of the temp return value is unnecessary, because it is semantically equivalent and more readable to just return at every switch case's end. This is done too to avoid potential bugs in the future related to the unwanted complexity. Also, the return value of _kvm_get_cpucfg is meant to be checked, but this was not done, so bad CPUCFG IDs wrongly fall back to the default case and 0 is incorrectly returned; check the return value to fix the UAPI behavior. While at it, also remove the redundant range check in kvm_check_cpucfg, because out-of-range CPUCFG IDs are already rejected by the -EINVAL as returned by _kvm_get_cpucfg(). Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support") Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support") Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: dts: Minor whitespace cleanupKrzysztof Kozlowski2-2/+2
The DTS code coding style expects exactly one space before '{' character. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Call early_init_fdt_scan_reserved_mem() earlierHuacai Chen1-2/+2
The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the arch_mem_init() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier in the init sequence, so that the reserved memory regions are set aside before any allocations are done using memblock. Cc: stable@vger.kernel.org Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table") Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Update cpu_sibling_map when disabling nonboot CPUsHuacai Chen1-53/+68
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Disable IRQ before init_fn() for nonboot CPUsHuacai Chen1-0/+1
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-20LoongArch: vdso: Use generic union vdso_data_storeAnna-Maria Behnsen1-4/+2
There is already a generic union definition for vdso_data_store in vdso datapage header. Use this definition to prevent code duplication. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240219153939.75719-9-anna-maria@linutronix.de
2024-02-10work around gcc bugs with 'asm goto' with outputsLinus Torvalds1-2/+2
We've had issues with gcc and 'asm goto' before, and we created a 'asm_volatile_goto()' macro for that in the past: see commits 3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation bug") and a9f180345f53 ("compiler/gcc4: Make quirk for asm_volatile_goto() unconditional"). Then, much later, we ended up removing the workaround in commit 43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR 58670") because we no longer supported building the kernel with the affected gcc versions, but we left the macro uses around. Now, Sean Christopherson reports a new version of a very similar problem, which is fixed by re-applying that ancient workaround. But the problem in question is limited to only the 'asm goto with outputs' cases, so instead of re-introducing the old workaround as-is, let's rename and limit the workaround to just that much less common case. It looks like there are at least two separate issues that all hit in this area: (a) some versions of gcc don't mark the asm goto as 'volatile' when it has outputs: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420 which is easy to work around by just adding the 'volatile' by hand. (b) Internal compiler errors: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422 which are worked around by adding the extra empty 'asm' as a barrier, as in the original workaround. but the problem Sean sees may be a third thing since it involves bad code generation (not an ICE) even with the manually added 'volatile'. but the same old workaround works for this case, even if this feels a bit like voodoo programming and may only be hiding the issue. Reported-and-tested-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/ Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andrew Pinski <quic_apinski@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-02-09rust: Refactor the build target to allow the use of builtin targetsJamie Cunliffe1-0/+1
Eventually we want all architectures to be using the target as defined by rustc. However currently some architectures can't do that and are using the target.json specification. This puts in place the foundation to allow the use of the builtin target definition or a target.json specification. Signed-off-by: Jamie Cunliffe <Jamie.Cunliffe@arm.com> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20231020155056.3495121-2-Jamie.Cunliffe@arm.com [catalin.marinas@arm.com: squashed loongarch ifneq fix from WANG Rui] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-02-08Merge branch 'kvm-kconfig'Paolo Bonzini2-2/+0
Cleanups to Kconfig definitions for KVM * replace HAVE_KVM with an architecture-dependent symbol, when CONFIG_KVM may or may not be available depending on CPU capabilities (MIPS) * replace HAVE_KVM with IS_ENABLED(CONFIG_KVM) for host-side code that is not part of the KVM module, so that it is completely compiled out * factor common "select" statements in common code instead of requiring each architecture to specify it
2024-02-08treewide: remove CONFIG_HAVE_KVMPaolo Bonzini2-2/+0
It has no users anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-08kvm: replace __KVM_HAVE_READONLY_MEM with Kconfig symbolPaolo Bonzini2-2/+1
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly return nonzero. This however does not make sense, and it prevented userspace from supporting this architecture-independent feature without recompilation. Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and is only used in virt/kvm/kvm_main.c. Userspace does not need to test it and there should be no need for it to exist. Remove it and replace it with a Kconfig symbol within Linux source code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-06LoongArch: vDSO: Disable UBSAN instrumentationKees Cook1-0/+1
The vDSO executes in userspace, so the kernel's UBSAN should not instrument it. Solves these kind of build errors: loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns': lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds' Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/ Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Fangrui Song <maskray@google.com> Cc: loongarch@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Fix earlycon parameter if KASAN enabledHuacai Chen1-0/+3
The earlycon parameter is based on fixmap, and fixmap addresses are not supposed to be shadowed by KASAN. So return the kasan_early_shadow_page in kasan_mem_to_shadow() if the input address is above FIXADDR_START. Otherwise earlycon cannot work after kasan_init(). Cc: stable@vger.kernel.org Fixes: 5aa4ac64e6add3e ("LoongArch: Add KASAN (Kernel Address Sanitizer) support") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]Huacai Chen2-4/+4
With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menuMasahiro Yamada1-17/+1
LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") because LoongArch was not mainlined at that time. The 'depends on PROC_FS' statement is stale as described in that commit. Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-06LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining itMasahiro Yamada1-4/+1
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch: KVM: Add returns to SIMD stubsRandy Dunlap1-2/+2
The stubs for kvm_own/lsx()/kvm_own_lasx() when CONFIG_CPU_HAS_LSX or CONFIG_CPU_HAS_LASX is not defined should have a return value since they return an int, so add "return -EINVAL;" to the stubs. Fixes the build error: In file included from ../arch/loongarch/include/asm/kvm_csr.h:12, from ../arch/loongarch/kvm/interrupt.c:8: ../arch/loongarch/include/asm/kvm_vcpu.h: In function 'kvm_own_lasx': ../arch/loongarch/include/asm/kvm_vcpu.h:73:39: error: no return statement in function returning non-void [-Werror=return-type] 73 | static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { } Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support") Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch: KVM: Fix build due to API changesHuacai Chen1-2/+2
Commit 8569992d64b8f750e34b7858eac ("KVM: Use gfn instead of hva for mmu_notifier_retry") replaces mmu_invalidate_retry_hva() usage with mmu_invalidate_retry_gfn() for X86, LoongArch also need similar changes to fix build. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-26LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()Huacai Chen2-7/+10
Machines which have more than 8 nodes fail to boot SMP after commit a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier"). Because such machines use tlb-based per-cpu base address rather than dmw-based per-cpu base address, resulting per-cpu variables can only be accessed after tlb_init(). But rcutree_report_cpu_starting() is now called before tlb_init() and accesses per-cpu variables indeed. Since the original patch want to avoid the lockdep warning caused by page allocation in tlb_init(), we can move rcutree_report_cpu_starting() to tlb_init() where after tlb exception configuration but before page allocation. Fixes: a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-01-20Merge tag 'loongarch-6.8' of ↵Linus Torvalds25-77/+1575
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ...
2024-01-18Merge tag 'driver-core-6.8-rc1' of ↵Linus Torvalds2-40/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing major in here this release cycle, just lots of small cleanups and some tweaks on kernfs that in the very end, got reverted and will come back in a safer way next release cycle. Included in here are: - more driver core 'const' cleanups and fixes - fw_devlink=rpm is now the default behavior - kernfs tiny changes to remove some string functions - cpu handling in the driver core is updated to work better on many systems that add topologies and cpus after booting - other minor changes and cleanups All of the cpu handling patches have been acked by the respective maintainers and are coming in here in one series. Everything has been in linux-next for a while with no reported issues" * tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits) Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock" kernfs: convert kernfs_idr_lock to an irq safe raw spinlock class: fix use-after-free in class_register() PM: clk: make pm_clk_add_notifier() take a const pointer EDAC: constantify the struct bus_type usage kernfs: fix reference to renamed function driver core: device.h: fix Excess kernel-doc description warning driver core: class: fix Excess kernel-doc description warning driver core: mark remaining local bus_type variables as const driver core: container: make container_subsys const driver core: bus: constantify subsys_register() calls driver core: bus: make bus_sort_breadthfirst() take a const pointer kernfs: d_obtain_alias(NULL) will do the right thing... driver core: Better advertise dev_err_probe() kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy() kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy() initramfs: Expose retained initrd as sysfs file fs/kernfs/dir: obey S_ISGID kernel/cgroup: use kernfs_create_dir_ns() ...
2024-01-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-149/+553
Pull kvm updates from Paolo Bonzini: "Generic: - Use memdup_array_user() to harden against overflow. - Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures. - Clean up Kconfigs that all KVM architectures were selecting - New functionality around "guest_memfd", a new userspace API that creates an anonymous file and returns a file descriptor that refers to it. guest_memfd files are bound to their owning virtual machine, cannot be mapped, read, or written by userspace, and cannot be resized. guest_memfd files do however support PUNCH_HOLE, which can be used to switch a memory area between guest_memfd and regular anonymous memory. - New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify per-page attributes for a given page of guest memory; right now the only attribute is whether the guest expects to access memory via guest_memfd or not, which in Confidential SVMs backed by SEV-SNP, TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM). x86: - Support for "software-protected VMs" that can use the new guest_memfd and page attributes infrastructure. This is mostly useful for testing, since there is no pKVM-like infrastructure to provide a meaningfully reduced TCB. - Fix a relatively benign off-by-one error when splitting huge pages during CLEAR_DIRTY_LOG. - Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE. - Use more generic lockdep assertions in paths that don't actually care about whether the caller is a reader or a writer. - let Xen guests opt out of having PV clock reported as "based on a stable TSC", because some of them don't expect the "TSC stable" bit (added to the pvclock ABI by KVM, but never set by Xen) to be set. - Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL. - Advertise flush-by-ASID support for nSVM unconditionally, as KVM always flushes on nested transitions, i.e. always satisfies flush requests. This allows running bleeding edge versions of VMware Workstation on top of KVM. - Sanity check that the CPU supports flush-by-ASID when enabling SEV support. - On AMD machines with vNMI, always rely on hardware instead of intercepting IRET in some cases to detect unmasking of NMIs - Support for virtualizing Linear Address Masking (LAM) - Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state prior to refreshing the vPMU model. - Fix a double-overflow PMU bug by tracking emulated counter events using a dedicated field instead of snapshotting the "previous" counter. If the hardware PMC count triggers overflow that is recognized in the same VM-Exit that KVM manually bumps an event count, KVM would pend PMIs for both the hardware-triggered overflow and for KVM-triggered overflow. - Turn off KVM_WERROR by default for all configs so that it's not inadvertantly enabled by non-KVM developers, which can be problematic for subsystems that require no regressions for W=1 builds. - Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL "features". - Don't force a masterclock update when a vCPU synchronizes to the current TSC generation, as updating the masterclock can cause kvmclock's time to "jump" unexpectedly, e.g. when userspace hotplugs a pre-created vCPU. - Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths, partly as a super minor optimization, but mostly to make KVM play nice with position independent executable builds. - Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on CONFIG_HYPERV as a minor optimization, and to self-document the code. - Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation" at build time. ARM64: - LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base granule sizes. Branch shared with the arm64 tree. - Large Fine-Grained Trap rework, bringing some sanity to the feature, although there is more to come. This comes with a prefix branch shared with the arm64 tree. - Some additional Nested Virtualization groundwork, mostly introducing the NV2 VNCR support and retargetting the NV support to that version of the architecture. - A small set of vgic fixes and associated cleanups. Loongarch: - Optimization for memslot hugepage checking - Cleanup and fix some HW/SW timer issues - Add LSX/LASX (128bit/256bit SIMD) support RISC-V: - KVM_GET_REG_LIST improvement for vector registers - Generate ISA extension reg_list using macros in get-reg-list selftest - Support for reporting steal time along with selftest s390: - Bugfixes Selftests: - Fix an annoying goof where the NX hugepage test prints out garbage instead of the magic token needed to run the test. - Fix build errors when a header is delete/moved due to a missing flag in the Makefile. - Detect if KVM bugged/killed a selftest's VM and print out a helpful message instead of complaining that a random ioctl() failed. - Annotate the guest printf/assert helpers with __printf(), and fix the various bugs that were lurking due to lack of said annotation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits) x86/kvm: Do not try to disable kvmclock if it was not enabled KVM: x86: add missing "depends on KVM" KVM: fix direction of dependency on MMU notifiers KVM: introduce CONFIG_KVM_COMMON KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache RISC-V: KVM: selftests: Add get-reg-list test for STA registers RISC-V: KVM: selftests: Add steal_time test support RISC-V: KVM: selftests: Add guest_sbi_probe_extension RISC-V: KVM: selftests: Move sbi_ecall to processor.c RISC-V: KVM: Implement SBI STA extension RISC-V: KVM: Add support for SBI STA registers RISC-V: KVM: Add support for SBI extension registers RISC-V: KVM: Add SBI STA info to vcpu_arch RISC-V: KVM: Add steal-update vcpu request RISC-V: KVM: Add SBI STA extension skeleton RISC-V: paravirt: Implement steal-time support RISC-V: Add SBI STA extension definitions RISC-V: paravirt: Add skeleton for pv-time support RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr() ...