summaryrefslogtreecommitdiff
path: root/arch/mips/pci
AgeCommit message (Collapse)AuthorFilesLines
2022-01-14Merge tag 'mips_5.17' of ↵Linus Torvalds4-165/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for more BCM47XX based devices - add MIPS support for brcmstb PCIe controller - add Loongson 2K1000 reset driver - remove board support for rbtx4938/rbtx4939 - remove support for TX4939 SoCs - fixes and cleanups * tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits) MIPS: ath79: drop _machine_restart again PCI: brcmstb: Augment driver for MIPs SOCs MIPS: bmips: Remove obsolete DMA mapping support MIPS: bmips: Add support PCIe controller device nodes dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs MIPS: compressed: Fix build with ZSTD compression MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2 MIPS: BCM47XX: Add support for Netgear R6300 v1 MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U MIPS: BCM47XX: Add board entry for Linksys WRT320N v1 MIPS: BCM47XX: Define Linksys WRT310N V2 buttons MIPS: Remove duplicated include in local.h MIPS: retire "asm/llsc.h" MIPS: rework local_t operation on MIPS64 MIPS: fix local_{add,sub}_return on MIPS64 mips/pci: remove redundant ret variable MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init() MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS MIPS: enable both vmlinux.gz.itb and vmlinuz for generic MIPS: signal: Return immediately if call fails ...
2022-01-13Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds1-29/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
2022-01-05mips/pci: remove redundant ret variableMinghao Chi1-3/+1
Return value from rt3883_pci_r32() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-02MIPS: TXX9: Remove TX4939 SoC supportThomas Bogendoerfer2-108/+0
After removal of RBTX4939 board support remove code for the TX4939 SoC. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-12-09MIPS: Octeon: Use arch_setup_msi_irq()Thomas Gleixner1-29/+3
The core code provides the same loop code except for the MSI-X reject. Move that to arch_setup_msi_irq() and remove the duplicated code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20211206210224.319201379@linutronix.de
2021-12-09MIPS: TXX9: Remove rbtx4938 board supportThomas Bogendoerfer2-54/+0
No active MIPS user own this board, so let's remove it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-12-09MIPS: Only define pci_remap_iospace() for RalinkTiezhu Yang1-0/+2
After commit 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'"), there exists the following warning on the Loongson64 platform: loongson-pci 1a000000.pci: IO 0x0018020000..0x001803ffff -> 0x0000020000 loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90 resource start address is not zero ... Call Trace: [<ffffffff8020dc78>] show_stack+0x40/0x120 [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74 [<ffffffff8023a0b0>] __warn+0xe0/0x110 [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0 [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90 [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8 [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8 [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98 [<ffffffff80819454>] loongson_pci_probe+0x34/0x160 [<ffffffff809203cc>] platform_probe+0x6c/0xe0 [<ffffffff8091d5d4>] really_probe+0xbc/0x340 [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110 [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118 [<ffffffff8091dea0>] __driver_attach+0x80/0x118 [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8 [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210 [<ffffffff8091ead4>] driver_register+0x8c/0x150 [<ffffffff80200a8c>] do_one_initcall+0x54/0x288 [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4 [<ffffffff80cfc380>] kernel_init+0x2c/0x134 [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c ---[ end trace e4a0efe10aa5cce6 ]--- loongson-pci 1a000000.pci: error -19: failed to map resource [io 0x20000-0x3ffff] We can see that the resource start address is 0x0000020000, because the ISA Bridge used the zero address which is defined in the dts file arch/mips/boot/dts/loongson/ls7a-pch.dtsi: ISA Bridge: /bus@10000000/isa@18000000 IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000 Based on the above analysis, the architecture-specific pci_remap_iospace() is not suitable for Loongson64, we should only define pci_remap_iospace() for Ralink on MIPS based on the commit background. Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'") Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-05Merge tag 'mips_5.16' of ↵Linus Torvalds6-1285/+20
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added printing of CPU options for /proc/cpuinfo - removed support for Netlogic SOCs - fixes and cleanup * tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Cobalt: Explain GT64111 early PCI fixup mips: fix HUGETLB function without THP enabled mips: cm: Convert to bitfield API to fix out-of-bounds access MIPS: Remove NETLOGIC support MIPS: kernel: proc: add CPU option reporting MIPS: kernel: proc: use seq_puts instead of seq_printf MIPS: kernel: proc: fix trivial style errors MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL MIPS: octeon: Remove unused functions MIPS: Loongson64: Add of_node_put() before break bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() bcm47xx: Get rid of redundant 'else' MIPS: sni: Fix the build MIPS: Avoid macro redefinitions MIPS: loongson64: Fix no screen display during boot-up MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
2021-11-03MIPS: Cobalt: Explain GT64111 early PCI fixupPali Rohár1-0/+15
Properly document why changing PCI Class Code for GT64111 device to Host Bridge is required as important details were after 20 years forgotten. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-24MIPS: Remove NETLOGIC supportThomas Bogendoerfer4-1274/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-18bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()Andy Shevchenko1-8/+4
Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() which provides PCI device name in a unified way. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-18bcm47xx: Get rid of redundant 'else'Andy Shevchenko1-3/+1
In the snipped like if (...) return ...; else the 'else' is redundant. Get rid of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-05MIPS: implement architecture-specific 'pci_remap_iospace()'Sergio Paracuellos1-0/+14
To make PCI IO work we need to properly virtually map IO cpu physical address and set this virtual address as the address of the first PCI IO port which is set using function 'set_io_port_base()'. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210925203224.10419-6-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12mips: Bulk conversion to generic_handle_domain_irq()Marc Zyngier2-8/+5
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-10MIPS: Add missing linux/irqdomain.h includesMarc Zyngier2-0/+2
A number of MIPS platforms are failing to directly include irqdomain.h. Fix this so that we can drop unnecessary dependencies Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-21MIPS: pci-legacy: revert "use generic pci_enable_resources"Ilya Lipnitskiy1-1/+37
This mostly reverts commit 99bca615d895 ("MIPS: pci-legacy: use generic pci_enable_resources"). Fixes regressions such as: ata_piix 0000:00:0a.1: can't enable device: BAR 0 [io 0x01f0-0x01f7] not claimed ata_piix: probe of 0000:00:0a.1 failed with error -22 The only changes from the strict revert are to fix checkpatch errors: ERROR: spaces required around that '=' (ctx:VxV) #33: FILE: arch/mips/pci/pci-legacy.c:252: + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { ^ ERROR: do not use assignment in if condition #67: FILE: arch/mips/pci/pci-legacy.c:284: + if ((err = pcibios_enable_resources(dev, mask)) < 0) Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-legacy: use generic pci_enable_resourcesIlya Lipnitskiy1-38/+2
Follow the reasoning from commit 842de40d93e0 ("PCI: add generic pci_enable_resources()"): The only functional difference from the MIPS version is that the generic one uses "!r->parent" to check for resource collisions instead of "!r->start && r->end". That should have no effect on any pci-legacy driver. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-legacy: remove busn_resource fieldIlya Lipnitskiy1-1/+0
No drivers set the busn_resource field in the pci_controller struct. Commit 7ee214b540d9 ("MIPS: PCI: Remove unused busn_offset") almost removed it over 3 years ago. Remove it for good to free up memory and eliminate messages like: pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-legacy: remove redundant info messagesIlya Lipnitskiy1-7/+0
Remove the following pci-legacy message: PCI host bridge /pci@440000/host-bridge ranges: MEM 0x0000000020000000..0x000000002fffffff IO 0x0000000000460000..0x000000000046ffff It is followed shortly by the same data from pci_register_host_bridge: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [io 0x460000-0x46ffff] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-legacy: stop using of_pci_range_to_resourceIlya Lipnitskiy1-2/+7
Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after of_pci_range_to_resource() change"). Most MIPS platforms do not define PCI_IOBASE, nor implement pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS platforms. of_pci_range_to_resource passes the _start address_ of the IO range into pci_address_to_pio, which then checks it against IO_SPACE_LIMIT and fails, because for MIPS platforms that use pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much higher than 0xffff. In fact, pci-mt7621 in staging already works around this problem, see commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set resource limits") So just stop using of_pci_range_to_resource, which does not work for MIPS. Fixes PCI errors like: pci_bus 0000:00: root bus resource [io 0xffffffff] Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-rt3883: more accurate DT error messagesIlya Lipnitskiy1-4/+2
Existing strings do not make sense: one is always NULL and the other refers to the wrong parent node. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-rt3883: trivial: remove unused variableIlya Lipnitskiy1-4/+0
Fixes the following compiler warning: warning: unused variable 'flags' [-Wunused-variable] Fixes: e5067c718b3a ("MIPS: pci-rt3883: Remove odd locking in PCI config space access code") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: trivial@kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-rt2880: remove unneeded locksIlya Lipnitskiy1-13/+0
Mirror pci-rt3883 fix from commit e5067c718b3a ("MIPS: pci-rt3883: Remove odd locking in PCI config space access code"). pci-rt2880 shares the driver layout with pci-rt3883 and the same reasons apply. Caller (generic PCI code) already does proper locking, so no need to add another one here. Local PCI read/write functions are never called simultaneously, also they do not require synchronization with the PCI controller ops, since they are used before the controller registration. Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-16MIPS: pci-rt2880: fix slot 0 configurationIlya Lipnitskiy1-13/+24
pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed, only slots/funcs with devices attached would be called. While arguably the right thing, that left no chance for this driver to ever initialize slot 0, effectively bricking PCI and USB on RT2880 devices such as the Belkin F5D8235-4 v1. Slot 0 configuration needs to happen after PCI bus enumeration, but before any device at slot 0x11 (func 0 or 1) is talked to. That was determined empirically by testing on a Belkin F5D8235-4 v1 device. A minimal BAR 0 config write followed by read, then setting slot 0 PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for proper functionality. Tested by ensuring that full- and high-speed USB devices get enumerated on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt). Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Tobias Wolf <dev-NTEO@vplace.de> Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-24MIPS: PCI: Fix a typoBhaskar Chowdhury1-1/+1
s/packt/packet/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-12MIPS: pci-mt7620: fix PLL lock checkIlya Lipnitskiy1-2/+3
Upstream a long-standing OpenWrt patch [0] that fixes MT7620 PCIe PLL lock check. The existing code checks the wrong register bit: PPLL_SW_SET is not defined in PPLL_CFG1 and bit 31 of PPLL_CFG1 is marked as reserved in the MT7620 Programming Guide. The correct bit to check for PLL lock is PPLL_LD (bit 23). Also reword the error message for clarity. Without this change it is unlikely that this driver ever worked with mainline kernel. [0]: https://lists.infradead.org/pipermail/lede-commits/2017-July/004441.html Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-06MIPS: pci-ar2315: include <linux/dma-direct.h> for phys_to_dmaChristoph Hellwig1-0/+1
Ensure this file has a prototype for phys_to_dma and dma_to_phys. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-13driver core: lift dma_default_coherent into common codeChristoph Hellwig1-1/+1
Lift the dma_default_coherent variable from the mips architecture code to the driver core. This allows an architecture to sdefault all device to be DMA coherent at run time, even if the kernel is build with support for DMA noncoherent device. By allowing device_initialize to set the ->dma_coherent field to this default the amount of arch hooks required for this behavior can be greatly reduced. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-13MIPS: refactor the runtime coherent vs noncoherent DMA indicatorsChristoph Hellwig1-3/+2
Replace the global coherentio enum, and the hw_coherentio (fake) boolean variables with a single boolean dma_default_coherent flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-12-29mips: pci: convert comma to semicolonZheng Yongjun1-3/+3
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-06mips: Vr41xx: add missing iounmap() on error in vr41xx_pciu_init()Qinglang Miao1-1/+3
add missing iounmap() of pciu_base on error when failed to init io_map_base. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-16Merge tag 'mips_5.10' of ↵Linus Torvalds3-11/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
2020-09-18MIPS: pci: use devm_platform_ioremap_resource_bynameZhang Qilong3-11/+7
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-11dma-direct: rename and cleanup __phys_to_dmaChristoph Hellwig2-2/+2
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11dma-direct: remove __dma_to_physChristoph Hellwig2-2/+2
There is no harm in just always clearing the SME encryption bit, while significantly simplifying the interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-08-06Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-132/+0
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
2020-07-24MIPS: Retire kvm paravirtJiaxun Yang2-132/+0
paravirt machine was introduced for Cavium's partial virtualization technology, however, it's host side support and QEMU support never landed in upstream. As Cavium was acquired by Marvel and they have no intention to maintain their MIPS product line, also paravirt is unlikely to be utilized by community users, it's time to retire it if nobody steps in to maintain it. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-23irqdomain/treewide: Free firmware node after domain removalJon Derrick1-0/+3
Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
2020-07-14irqdomain/treewide: Keep firmware node unconditionally allocatedThomas Gleixner1-2/+3
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
2020-05-27MIPS: Loongson64: Switch to generic PCI driverJiaxun Yang3-188/+0
We can now enable generic PCI driver in Kconfig, and remove legacy PCI driver code. Radeon vbios quirk is moved to the platform folder to fit the new structure. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-09MIPS: Remove NEC MARKEINS/EMMAThomas Bogendoerfer4-324/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-09MIPS: Remove PMC MSP71xx platformThomas Bogendoerfer3-1163/+0
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-09MIPS: Remove support for LASATThomas Bogendoerfer3-226/+0
All LASAT has probably gone bad, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-07MIPS: Use fallthrough for arch/mipsLiangliang Huang2-3/+2
Convert the various /* fallthrough */ comments to the pseudo-keyword fallthrough; Done via script: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Liangliang Huang <huangll@lemote.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-19MIPS: cleanup fixup_bigphys_addr handlingChristoph Hellwig1-1/+1
fixup_bigphys_addr is only provided by the alchemy platform. Remove all the stubs, and ensure we only call it if it is actually implemented. Also don't bother implementing io_remap_pfn_range if we don't have to, and move the remaining implementation to alchemy platform code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-5/+49
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-24MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and FuelThomas Bogendoerfer1-0/+24
Add detection for IOC3 chips in IP35 machines. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-10MIPS: PCI: Support mapping of INTB/C/D for pci-xtalk-bridgeThomas Bogendoerfer1-4/+24
Implented mapping of PCI INTB/C/D, which is needed for PCI multifunction devices, PCI-PCI bridges and IOC3. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-10MIPS: SGI-IP27: use asm/sn/agent.h for including HUB related stuffThomas Bogendoerfer1-1/+1
By including agent.h where hub related defines/structs are needed, we have only one place to select, which agent chip (HUB or BEDROCK) is used. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig4-4/+4
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-15 19:24:32 +0300