summaryrefslogtreecommitdiff
path: root/arch/openrisc/kernel
AgeCommit message (Collapse)AuthorFilesLines
2023-05-01Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds6-27/+93
Pull OpenRISC updates from Stafford Horne: "Two things for OpenRISC this cycle: - Small cleanup for device tree cpu iteration from Rob Herring - Add support for storing, restoring and accessing user space FPU state, to allow for libc to support the FPU on OpenRISC" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Add floating point regset openrisc: Support floating point user api openrisc: Support storing and restoring fpu state openrisc: Properly store r31 to pt_regs on unhandled exceptions openrisc: Use common of_get_cpu_node() instead of open-coding
2023-04-26openrisc: Add floating point regsetStafford Horne1-0/+37
Define REGSET_FPU to allow reading and writing the FPCSR fpu state register. This will be used primarily by debuggers like GDB. Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Support floating point user apiStafford Horne4-4/+35
Add support for handling floating point exceptions and forwarding the SIGFPE signal to processes. Also, add fpu state to sigcontext. Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Support storing and restoring fpu stateStafford Horne2-2/+17
OpenRISC floating point state is not so expensive to save as OpenRISC uses general purpose registers for floating point instructions. We need to save only the floating point status and control register, FPCSR. Add support to maintain the FPCSR unconditionally upon exceptions and switches. On machines that do not support FPU this will always just store 0x0 and restore is a no-op. On FPU systems this adds an additional special purpose register read/write and read/write to memory (already cached). Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Properly store r31 to pt_regs on unhandled exceptionsStafford Horne1-4/+2
In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") the unhandled exception path was changed to do an early store of r30 instead of r31. The entry code was not updated and r31 is not getting stored to pt_regs. This patch updates the entry handler to store r31 instead of r30. We also remove some misleading commented out store r30 and r31 instructrions. I noticed this while working on adding floating point exception handling, This issue probably would never impact anything since we kill the process or Oops right away on unhandled exceptions. Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-01openrisc: Use common of_get_cpu_node() instead of open-codingRob Herring1-17/+2
The common of_get_cpu_node() is equivalent to setup_find_cpu_node(), so use it instead. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-03-24treewide: Trace IPIs sent via smp_send_reschedule()Valentin Schneider1-1/+1
To be able to trace invocations of smp_send_reschedule(), rename the arch-specific definitions of it to arch_smp_send_reschedule() and wrap it into an smp_send_reschedule() that contains a tracepoint. Changes to include the declaration of the tracepoint were driven by the following coccinelle script: @func_use@ @@ smp_send_reschedule(...); @include@ @@ #include <trace/events/ipi.h> @no_include depends on func_use && !include@ @@ #include <...> + + #include <trace/events/ipi.h> [csky bits] [riscv bits] Signed-off-by: Valentin Schneider <vschneid@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
2023-01-13arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabledPeter Zijlstra1-0/+1
Current arch_cpu_idle() is called with IRQs disabled, but will return with IRQs enabled. However, the very first thing the generic code does after calling arch_cpu_idle() is raw_local_irq_disable(). This means that architectures that can idle with IRQs disabled end up doing a pointless 'enable-disable' dance. Therefore, push this IRQ disabling into the idle function, meaning that those architectures can avoid the pointless IRQ state flipping. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
2023-01-13objtool/idle: Validate __cpuidle code as noinstrPeter Zijlstra1-1/+0
Idle code is very like entry code in that RCU isn't available. As such, add a little validation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
2022-11-16openrisc: ptrace: user_regset_copyin_ignore() always returns 0Sergey Shtylyov1-5/+3
user_regset_copyin_ignore() always returns 0, so checking its result seems pointless -- don't do this anymore... Link: https://lkml.kernel.org/r/20221014212235.10770-9-s.shtylyov@omp.ru Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-16Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds1-8/+8
Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-08openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncachedJann Horn1-8/+8
Since commit 8782fb61cc848 ("mm: pagewalk: Fix race between unmap and page walker"), walk_page_range() on kernel ranges won't work anymore, walk_page_range_novma() must be used instead. Note: I don't have an openrisc development setup, so this is completely untested. Fixes: 8782fb61cc848 ("mm: pagewalk: Fix race between unmap and page walker") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-10-02kbuild: use obj-y instead extra-y for objects placed at the headMasahiro Yamada1-2/+2
The objects placed at the head of vmlinux need special treatments: - arch/$(SRCARCH)/Makefile adds them to head-y in order to place them before other archives in the linker command line. - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of obj-y to avoid them going into built-in.a. This commit gets rid of the latter. Create vmlinux.a to collect all the objects that are unconditionally linked to vmlinux. The objects listed in head-y are moved to the head of vmlinux.a by using 'ar m'. With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y for builtin objects. There is no *.o that is directly linked to vmlinux. Drop unneeded code in scripts/clang-tools/gen_compile_commands.py. $(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested by Nathan Chancellor [1]. [1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-12kernel: exit: cleanup release_thread()Kefeng Wang1-4/+0
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs. Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Brian Cain <bcain@quicinc.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> [csky] Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-07-30profile: setup_profiling_timer() is moslty not implementedBen Dooks1-6/+0
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-28openrisc: unwinder: Fix grammar issue in commentXiang wangx1-1/+1
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-04Merge tag 'kthread-cleanups-for-v5.19' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kthread updates from Eric Biederman: "This updates init and user mode helper tasks to be ordinary user mode tasks. Commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") caused init and the user mode helper threads that call kernel_execve to have struct kthread allocated for them. This struct kthread going away during execve in turned made a use after free of struct kthread possible. Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for init and umh") is enough to fix the use after free and is simple enough to be backportable. The rest of the changes pass struct kernel_clone_args to clean things up and cause the code to make sense. In making init and the user mode helpers tasks purely user mode tasks I ran into two complications. The function task_tick_numa was detecting tasks without an mm by testing for the presence of PF_KTHREAD. The initramfs code in populate_initrd_image was using flush_delayed_fput to ensuere the closing of all it's file descriptors was complete, and flush_delayed_fput does not work in a userspace thread. I have looked and looked and more complications and in my code review I have not found any, and neither has anyone else with the code sitting in linux-next" * tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sched: Update task_tick_numa to ignore tasks without an mm fork: Stop allowing kthreads to call execve fork: Explicitly set PF_KTHREAD init: Deal with the init process being a user mode process fork: Generalize PF_IO_WORKER handling fork: Explicity test for idle tasks in copy_thread fork: Pass struct kernel_clone_args into copy_thread kthread: Don't allocate kthread_struct for init and umh
2022-05-27Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds5-306/+167
Pull OpenRISC updates from Stafford Horne: - A few sparse warning fixups and other cleanups I noticed when working on a recent TLB bug found on a new OpenRISC core bring up. - A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC platforms when running CI tests * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Allow power off handler overriding openrisc: Remove unused IMMU tlb workardound openrisc/fault: Fix symbol scope warnings openrisc/delay: Add include to fix symbol not declared warning openrisc/time: Fix symbol scope warnings openrisc/traps: Declare unhandled_exception for asmlinkage openrisc/traps: Remove die_if_kernel function openrisc/traps: Declare file scope symbols as static openrisc: Update litex defconfig to support glibc userland openrisc: Pretty print show_registers memory dumps openrisc: Add syscall details to emergency syscall debugging openrisc: Add support for liteuart emergency printing openrisc: Cleanup emergency print handling openrisc: Add gcc machine instruction flag configuration openrisc: define nop command for simulator reboot openrisc: remove bogus nops and shutdowns openrisc: fix typos in comments
2022-05-23openrisc: Allow power off handler overridingStafford Horne1-2/+15
The OpenRISC platform always defines a default pm_power_off hanlder which is only useful for simulators. Having this set also means power management drivers like syscon-power are not able to wire in their own pm_power_off handlers. Fix this by not setting the pm_power_off handler by default and fallback to the simulator power off handler if no handler is set. This has been tested with a new OpenRISC virt platform I am working on for QEMU. https://github.com/stffrdhrn/qemu/commits/or1k-virt Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Remove unused IMMU tlb workardoundStafford Horne1-209/+0
This looks to be some historical code that was used to convert TLB misses on branches from l.bf, l.jal, l.j etc all to a trampoline using l.jr (jump register). I don't see this being used and I don't know the history of it so remove it. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/time: Fix symbol scope warningsStafford Horne1-1/+2
Spare reported the following warnings: arch/openrisc/kernel/time.c:64:1: warning: symbol 'clockevent_openrisc_timer' was not declared. Should it be static? arch/openrisc/kernel/time.c:66:6: warning: symbol 'openrisc_clockevent_init' was not declared. Should it be static? This patch fixes by: - Add static declaration to clockevent_openrisc_timer as it's used only in this file. - Add include for asm/time.h for openrisc_clockevent_init declaration. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Declare unhandled_exception for asmlinkageStafford Horne1-1/+1
Noticed this when workin on warnings. As unhandled_exception is used in entry.S we should attribute it with asmlinkage. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Remove die_if_kernel functionStafford Horne1-9/+0
This was noticed when I saw this warning: arch/openrisc/kernel/traps.c:234:6: warning: no previous prototype for 'die_if_kernel' [-Wmissing-prototypes] 234 | void die_if_kernel(const char *str, struct pt_regs *regs, long err) | ^~~~~~~~~~~~~ The die_if_kernel function is not used in the OpenRISC port so remove it. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Declare file scope symbols as staticStafford Horne1-3/+3
Sparse was reporting the following warnings: arch/openrisc/kernel/traps.c:37:5: warning: symbol 'kstack_depth_to_print' was not declared. Should it be static? arch/openrisc/kernel/traps.c:39:22: warning: symbol 'lwa_addr' was not declared. Should it be static? arch/openrisc/kernel/traps.c:41:6: warning: symbol 'print_trace' was not declared. Should it be static? The function print_trace and local variables kstack_depth_to_print and lwa_addr are not used outside of this file. This patch marks them as static. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Pretty print show_registers memory dumpsStafford Horne1-13/+33
Currently show registers, print memory dumps character by character and there is no address information, so its a bit difficult to use. For example before a stack dump looks as follows. [ 13.650000] Stack: [ 13.650000] Call trace [ 13.690000] [<(ptrval)>] ? put_timespec64+0x44/0x60 [ 13.690000] [<(ptrval)>] ? _data_page_fault_handler+0x104/0x10c [ 13.700000] [ 13.700000] Code: [ 13.700000] 13 [ 13.700000] ff [ 13.700000] ff [ 13.700000] f9 [ 13.710000] 84 [ 13.710000] 82 [ 13.710000] ff [ 13.710000] bc [ 13.710000] 07 [ 13.710000] fd [ 13.720000] 4e [ 13.720000] 67 [ 13.720000] 84 [ 13.720000] 62 [ 13.720000] ff ... This change updates this to print the address and data a word at time. [ 0.830000] Stack: [ 0.830000] Call trace: [ 0.830000] [<(ptrval)>] load_elf_binary+0x744/0xf5c [ 0.830000] [<(ptrval)>] ? __kernel_read+0x144/0x184 [ 0.830000] [<(ptrval)>] bprm_execve+0x27c/0x3e4 [ 0.830000] [<(ptrval)>] kernel_execve+0x16c/0x1a0 [ 0.830000] [<(ptrval)>] run_init_process+0xa0/0xec [ 0.830000] [<(ptrval)>] ? kernel_init+0x0/0x14c [ 0.830000] [<(ptrval)>] kernel_init+0x7c/0x14c [ 0.830000] [<(ptrval)>] ? calculate_sigpending+0x30/0x40 [ 0.830000] [<(ptrval)>] ret_from_fork+0x1c/0x84 [ 0.830000] [ 0.830000] c1033dbc: c1033dec [ 0.830000] c1033dc0: c015258c [ 0.830000] c1033dc4: c129da00 [ 0.830000] c1033dc8: 00000002 [ 0.830000] c1033dcc: 00000000 [ 0.830000] c1033dd0: c129da00 [ 0.830000] c1033dd4: 00000000 [ 0.830000] c1033dd8: 00000000 [ 0.830000] (c1033ddc:) 00001e04 [ 0.830000] c1033de0: 001501fc [ 0.830000] c1033de4: c1033e68 [ 0.830000] c1033de8: c0152e60 [ 0.830000] c1033dec: c129da5c [ 0.830000] c1033df0: c0674a20 [ 0.830000] c1033df4: c1033e50 [ 0.830000] c1033df8: c00e3d6c [ 0.830000] c1033dfc: c129da5c [ 0.830000] c1033e00: 00000003 [ 0.830000] c1033e04: 00150000 [ 0.830000] c1033e08: 00002034 [ 0.830000] c1033e0c: 001501fc [ 0.830000] c1033e10: 00000000 [ 0.830000] c1033e14: 00150000 [ 0.830000] c1033e18: 0014ebbc [ 0.830000] c1033e1c: 00002000 [ 0.830000] c1033e20: 00000003 [ 0.830000] c1033e24: c12a07e0 [ 0.830000] c1033e28: 00000000 [ 0.830000] c1033e2c: 00000000 [ 0.830000] c1033e30: 00000000 [ 0.830000] c1033e34: 40040000 [ 0.830000] c1033e38: 00000000 [ 0.830000] [ 0.830000] Code: [ 0.830000] c00047a4: 9c21fff8 [ 0.830000] c00047a8: d4012000 [ 0.830000] c00047ac: d4011804 [ 0.830000] c00047b0: e4040000 [ 0.830000] c00047b4: 10000005 [ 0.830000] c00047b8: 9c84ffff [ 0.830000] (c00047bc:) d8030000 [ 0.830000] c00047c0: 03fffffc [ 0.830000] c00047c4: 9c630001 [ 0.830000] c00047c8: 9d640001 [ 0.830000] c00047cc: 84810000 [ 0.830000] c00047d0: 84610004 Now we are also printing a bit of the stack as well as the code. The stack is output to help with debugging. There may be concern about exposing sensitive information on the stack, but we are already dumping all register content which would have similar sensitive information. So I am going ahead as this proves useful in investigation. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Add syscall details to emergency syscall debuggingStafford Horne1-5/+15
When bringing linux on the or1k Marocchino we ran into issues starting init. This patch adds the syscall number and return address to assist tracing syscalls even before strace is able to be used. By default this is all disabled but a developer could adjust the ifdef to enable debugging. Cc: Andrey Bacherov <bandvig@mail.ru> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Add support for liteuart emergency printingStafford Horne1-1/+12
This patch adds support for sending emergency print output, such as unhandled exception details, to a liteuart serial device. This is the default device available on litex platforms. If a developer want to use this they should update UART_BASE_ADD to the address of liteuart. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Cleanup emergency print handlingStafford Horne1-63/+85
The emergency print support only works for 8250 compatible serial ports. Now that OpenRISC platforms may be configured with different serial port hardware we don't want emergency print to try to print to non-existent hardware which will cause lockups. This patch contains several fixes to get emergency print working again: - Update symbol loading to not assume the location of symbols - Split the putc print operation out to its own function to allow for different future implementations. - Update _emergency_print_nr and _emergency_print to use the putc function. - Guard serial 8250 specific sequences by CONFIG_SERIAL_8250 - Update string line feed from lf,cr to cr,lf. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: define nop command for simulator rebootJason A. Donenfeld1-0/+2
The simulator defines `l.nop 1` for shutdown, but doesn't have anything for reboot. Use 13 for this, which is currently unused, dubbed `NOP_REBOOT`. Cc: Stafford Horne <shorne@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Link: https://lore.kernel.org/all/YmnaDUpVI5ihgvg6@zx2c4.com/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-18random: handle latent entropy and command line from random_init()Jason A. Donenfeld1-1/+1
Currently, start_kernel() adds latent entropy and the command line to the entropy bool *after* the RNG has been initialized, deferring when it's actually used by things like stack canaries until the next time the pool is seeded. This surely is not intended. Rather than splitting up which entropy gets added where and when between start_kernel() and random_init(), just do everything in random_init(), which should eliminate these kinds of bugs in the future. While we're at it, rename the awkwardly titled "rand_initialize()" to the more standard "random_init()" nomenclature. Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-14openrisc: start CPU timer early in bootJason A. Donenfeld1-0/+9
In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Acked-by: Stafford Horne <shorne@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-07fork: Generalize PF_IO_WORKER handlingEric W. Biederman1-4/+3
Add fn and fn_arg members into struct kernel_clone_args and test for them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER). This allows any task that wants to be a user space task that only runs in kernel mode to use this functionality. The code on x86 is an exception and still retains a PF_KTHREAD test because x86 unlikely everything else handles kthreads slightly differently than user space tasks that start with a function. The functions that created tasks that start with a function have been updated to set ".fn" and ".fn_arg" instead of ".stack" and ".stack_size". These functions are fork_idle(), create_io_thread(), kernel_thread(), and user_mode_thread(). Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07fork: Pass struct kernel_clone_args into copy_threadEric W. Biederman1-2/+5
With io_uring we have started supporting tasks that are for most purposes user space tasks that exclusively run code in kernel mode. The kernel task that exec's init and tasks that exec user mode helpers are also user mode tasks that just run kernel code until they call kernel execve. Pass kernel_clone_args into copy_thread so these oddball tasks can be supported more cleanly and easily. v2: Fix spelling of kenrel_clone_args on h8300 Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-03-11resume_user_mode: Move to resume_user_mode.hEric W. Biederman1-2/+2
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h. While doing that rename tracehook_notify_resume to resume_user_mode_work. Update all of the places that included tracehook.h for these functions to include resume_user_mode.h instead. Update all of the callers of tracehook_notify_resume to call resume_user_mode_work. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-03-10ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.hEric W. Biederman1-3/+2
Rename tracehook_report_syscall_{entry,exit} to ptrace_report_syscall_{entry,exit} and place them in ptrace.h There is no longer any generic tracehook infractructure so make these ptrace specific functions ptrace specific. Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-01-17Merge branch 'signal-for-v5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
2022-01-14Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds2-14/+17
Pull OpenRISC updates from Stafford Horne: "A few fixups and enhancements for OpenRISC: - Fix to add proper wrapper for clone3 to save callee saved regs - Cleanups for clone, fork and switch - Add support for common clk so OpenRISC and use more drivers" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: init: Add support for common clk openrisc: Add clone3 ABI wrapper openrisc: Use delay slot for clone and fork wrappers openrisc: Cleanup switch code and comments
2022-01-12openrisc: init: Add support for common clkStafford Horne1-0/+4
When testing the new litex_mmc driver it was found to not work on OpenRISC due to missing support for common clk. This patch does the basic initialization to allow OpenRISC to use the common clk framework. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-12-13exit: Add and use make_task_dead.Eric W. Biederman1-1/+1
There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-04openrisc: Add clone3 ABI wrapperStafford Horne1-0/+5
Like fork and clone the clone3 syscall needs a wrapper to save callee saved registers, which is required by the OpenRISC ABI. This came up after auditing code following a discussion with Rob Landley and Arnd Bergmann [0]. Tested with the clone3 kselftests and there were no issues. [0] https://lore.kernel.org/all/41206fc7-f8ce-98aa-3718-ba3e1431e320@landley.net/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944 Fixes: 07e83dfbe16c ("openrisc: Enable the clone3 syscall") Cc: Rob Landley <rob@landley.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-04openrisc: Use delay slot for clone and fork wrappersStafford Horne1-4/+2
This saves one instruction. Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-04openrisc: Cleanup switch code and commentsStafford Horne1-10/+6
The saving of the r12 register was there for a compiler bug referring to a port that was never upstreamed. It should be safe to use this as the new compiler is what we use and the old deprecated. Also, clean up some typos and references to old names in the switch comments. Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-12-01openrisc: Snapshot thread flagsMark Rutland1-1/+1
Some thread flags can be set remotely, and so even when IRQs are disabled, the flags can change under our feet. Generally this is unlikely to cause a problem in practice, but it is somewhat unsound, and KCSAN will legitimately warn that there is a data race. To avoid such issues, a snapshot of the flags has to be taken prior to using them. Some places already use READ_ONCE() for that, others do not. Convert them all to the new flag accessor helpers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Link: https://lore.kernel.org/r/20211129130653.2037928-9-mark.rutland@arm.com
2021-11-11Merge branch 'exit-cleanups-for-v5.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
2021-11-08Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds4-7/+7
Pull OpenRISC updates from Stafford Horne: "This includes two minor cleanups, plus a bug fix for OpenRISC TLB flush code that allows the the SMP kernel to boot again" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: fix SMP tlb flush NULL pointer dereference openrisc: signal: remove unused DEBUG_SIG macro openrisc: time: don't mark comment as kernel-doc
2021-11-03openrisc: fix SMP tlb flush NULL pointer dereferenceStafford Horne2-4/+6
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing kernel tlb entries. Somehow this was missed when I was testing c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") and now the SMP kernel fails to completely boot. In OpenRISC VMA is used only to determine which cores need to have their TLB entries flushed. This patch updates the logic to flush tlbs on all cores when the VMA is passed as NULL. Also, we update places VMA is passed as NULL to use flush_tlb_kernel_range instead. Now, the only place VMA is passed as NULL is in the implementation of flush_tlb_kernel_range. Fixes: c28b27416da9 ("openrisc: Implement proper SMP tlb flushing") Reported-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de> Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-11-03Merge tag 'devicetree-for-5.16' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert /reserved-memory bindings to schemas - Convert a bunch of NFC bindings to schemas - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680, Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards, and TI sysc - New binding schemas for: msi-ranges, Aspeed UART routing controller, palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM memory controller, and Apple M1 PCIe host - Run schema checks for %.dtb targets - Improve build time when using DT_SCHEMA_FILES - Improve error message when dtschema is not found - Various doc reference fixes in MAINTAINERS - Convert architectures to common CPU h/w ID parsing function of_get_cpu_hwid(). - Allow for empty NUMA node IDs which may be hotplugged - Cleanup of __fdt_scan_reserved_mem() - Constify device_node parameters - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks 'node_name_vs_property_name' and 'interrupt_map'. - Enable dtc 'unit_address_format' warning by default - Fix unittest EXPECT text for gpio hog errors * tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits) dt-bindings: net: ti,bluetooth: Document default max-speed dt-bindings: pci: rcar-pci-ep: Document r8a7795 dt-bindings: net: qcom,ipa: IPA does support up to two iommus of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem() of: unittest: document intentional interrupt-map provider build warning of: unittest: fix EXPECT text for gpio hog errors of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8 dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml dt-bindings: display: tilcd: Fix endpoint addressing in example dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible dt-bindings: ufs: exynos-ufs: add io-coherency property dt-bindings: mips: convert Ralink SoCs and boards to schema dt-bindings: display: xilinx: Fix example with psgtr dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml dt-bindings: Add a help message when dtschema tools are missing dt-bindings: bus: ti-sysc: Update to use yaml binding dt-bindings: sram: Allow numbers in sram region node name dt-bindings: display: Document the Xylon LogiCVC display controller ...
2021-11-01Merge tag 'sched-core-2021-11-01' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-04 00:38:49 +0300