| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.
The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.
In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes: df24e1783e6e ("parisc: Add vDSO support")
CC: stable@vger.kernel.org # 5.18
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The commit e8aa7b17fe41 broke the 32-bit load-word unalignment exception
handler because it calculated the wrong amount of bits by which the value
should be shifted. This patch fixes it.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: e8aa7b17fe41 ("parisc/unaligned: Rewrite inline assembly of emulate_ldw()")
Cc: stable@vger.kernel.org # v5.18
|
|
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
|
|
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.
This won't fix all coherency issues with shared mappings but it
seems to work well in practice. I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.
There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.18+
|
|
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix this build error noticed by the kernel test robot:
drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.10+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
|
|
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f86 ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
|
With the kernel 5.18, the system will hang on boot if it is compiled with
CONFIG_SCHED_MC. The last printed message is "Brought up 1 node, 1 CPU".
The crash happens in sd_init
tl->mask (which is cpu_coregroup_mask) returns an empty mask. This happens
because cpu_topology[0].core_sibling is empty.
Consequently, sd_span is set to an empty mask
sd_id = cpumask_first(sd_span) sets sd_id == NR_CPUS (because the mask is
empty)
sd->shared = *per_cpu_ptr(sdd->sds, sd_id); sets sd->shared to NULL
because sd_id is out of range
atomic_inc(&sd->shared->ref); crashes without printing anything
We can fix it by calling reset_cpu_topology() from init_cpu_topology() -
this will initialize the sibling masks on CPUs, so that they're not empty.
This patch also removes the variable "dualcores_found", it is useless,
because during boot, init_cpu_topology is called before
store_cpu_topology. Thus, set_sched_topology(parisc_mc_topology) is never
called. We don't need to call it at all because default_topology in
kernel/sched/topology.c contains the same items as parisc_mc_topology.
Note that we should not call store_cpu_topology() from init_per_cpu()
because it is called too early in the kernel initialization process and it
results in the message "Failure to register CPU0 device". Before this
patch, store_cpu_topology() would exit immediatelly because
cpuid_topo->core id was uninitialized and it was 0.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v5.18
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"Minor cleanups and code optimizations, e.g.:
- improvements in assembly statements in the tmpalias code path
- added some additionals compile time checks
- drop some unneccesary assembler DMA syncs"
* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
parisc: Optimize tmpalias function calls
parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
parisc: Fix wrong comment for shr macro
parisc: Prevent ldil() to sign-extend into upper 32 bits
parisc: Don't hardcode assembler bit definitions in tmpalias code
parisc: Don't enforce DMA completion order in cache flushes
parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
|
Those old syscalls aren't exported via our syscall table, so just drop
them.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Parisc overrides 'nm' with a shell script. I was hit by a false-positive
error of $(NM) because this script returns the exit status of grep
instead of ${CROSS_COMPILE}nm. (grep returns 1 if no lines were selected)
I tried to fix it, but in the code review, Helge suggested to remove it
entirely. [1]
This script was added in 2003. [2]
Presumably, it was a workaround for old toolchains (but even the parisc
maintainer does not know the detail any more).
Hopefully, recent tools should work fine.
[1]: https://lore.kernel.org/all/1c12cd26-d8aa-4498-f4c0-29478b9578fe@gmx.de/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=36eaa6e4c0e0b6950136b956b72fd08155b92ca3
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
|
|
Instead of converting the physical address of the tmpalias mapping to
the tlb insert format inside all the various tmpalias functions, move
this conversion over to the DTLB miss handler. The physical address is
already in %r26 (or will be calculated into %r23), so there are no
additional steps needed in the functions themselves.
Additionally use the dep_safe() and depi_safe() macros to avoid
differentiating between 32- and 64-bit builds and as such make the code
much more readable.
The check if "ldil L%(TMPALIAS_MAP_START)" will sign extend into the
upper 32 bits can be dropped, because we added a compile time check in
an earlier patch.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The comment that the source and target register can not be the same is
wrong. Instead on PA2.0 usage of extru can clobber upper 32-bits.
This patch fixes the comment.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add some build time checks to prevent that the various usages of
"ldil L%(TMPALIAS_MAP_START), %reg"
sign-extends into the upper 32 bits when building a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove the hardcoded bit definitions in the tmpalias assembly code.
This makes it easy to change the size of the tmpalias region.
The alignment of the tmpalias region is reduced from 16 MB to 8 MB.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The only place we need to ensure all outstanding cache coherence
operations are complete is in invalidate_kernel_vmap_range. All
parisc drivers synchronize DMA operations internally and do not
call invalidate_kernel_vmap_range. We only need this for non-coherent
I/O operations.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Nothing in termbits seems to require anything from linux/posix_types.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
the comments in mips).
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some defines are the same across all archs. Move the most obvious
intersection to termbits-common.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change fixes the following:
1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.
2) flush_kernel_vmap_range is primarily intended for DMA flushes.
The whole cache flush in flush_kernel_vmap_range is only possible
when interrupts are enabled on SMP machines. Since __patch_text_multiple
calls flush_kernel_vmap_range with interrupts disabled, it is better
to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm.
3) The final call to flush_icache_range is unnecessary.
Tested with `[PATCH, V3] parisc: Rewrite cache flush code for
PA8800/PA8900' change on rp3440, c8000 and c3750 (32 and 64-bit).
Note by Helge:
This patch had been temporarily reverted shortly before v5.18-rc6 in order
to fix boot issues. Now it can be re-applied.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Originally, I was convinced that we needed to use tmpalias flushes
everwhere, for both user and kernel flushes. However, when I modified
flush_kernel_dcache_page_addr, to use a tmpalias flush, my c8000
would crash quite early when booting.
The PDC returns alias values of 0 for the icache and dcache. This
indicates that either the alias boundary is greater than 16MB or
equivalent aliasing doesn't work. I modified the tmpalias code to
make it easy to try alternate boundaries. I tried boundaries up to
128MB but still kernel tmpalias flushes didn't work on c8000.
This led me to conclude that tmpalias flushes don't work on PA8800
and PA8900 machines, and that we needed to flush directly using the
virtual address of user and kernel pages. This is likely the major
cause of instability on the c8000 and rp34xx machines.
Flushing user pages requires doing a temporary context switch as we
have to flush pages that don't belong to the current context. Further,
we have to deal with pages that aren't present. If a page isn't
present, the flush instructions fault on every line.
Other code has been rearranged and simplified based on testing. For
example, I introduced a flush_cache_dup_mm routine. flush_cache_mm
and flush_cache_dup_mm differ in that flush_cache_mm calls
purge_cache_pages and flush_cache_dup_mm calls flush_cache_pages.
In some implementations, pdc is more efficient than fdc. Based on
my testing, I don't believe there's any performance benefit on the
c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Change the "BUG" to "WARNING" and disable the message because it triggers
occasionally in spite of the check in flush_cache_page_if_present.
The pte value extracted for the "from" page in copy_user_highpage is racy and
occasionally the pte is cleared before the flush is complete. I assume that
the page is simultaneously flushed by flush_cache_mm before the pte is cleared
as nullifying the fdc doesn't seem to cause problems.
I investigated various locking scenarios but I wasn't able to find a way to
sequence the flushes. This code is called for every COW break and locks impact
performance.
This patch is related to the bigger cache flush patch because we need the pte
on PA8800/PA8900 to flush using the vma context.
I have also seen this from copy_to_user_page and copy_from_user_page.
The messages appear infrequently when enabled.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We need the tty fixes in here as well, as we need to revert one of them :(
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch series "Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating", v4.
presently, migrating a hugetlb page or unmapping a poisoned hugetlb page,
we'll use ptep_clear_flush() and set_pte_at() to nuke the page table entry
and remap it, and this is incorrect for CONT-PTE or CONT-PMD size hugetlb
page, which will cause potential data consistent issue. This patch set
will change to use hugetlb related APIs to fix this issue.
Note: Mike pointed out the huge_ptep_get() will only return the one
specific value, and it would not take into account the dirty or young bits
of CONT-PTE/PMDs like the huge_ptep_get_and_clear() [1]. This
inconsistent issue is not introduced by this patch set, and this issue
will be addressed in another thread [2]. Meanwhile the uffd for hugetlb
case [3] pointed out by Gerald also needs another patch to address.
[1] https://lore.kernel.org/linux-mm/85bd80b4-b4fd-0d3f-a2e5-149559f2f387@oracle.com/
[2] https://lore.kernel.org/all/cover.1651998586.git.baolin.wang@linux.alibaba.com/
[3] https://lore.kernel.org/linux-mm/20220503120343.6264e126@thinkpad/
This patch (of 3):
It is incorrect to use ptep_clear_flush() to nuke a hugetlb page table
when unmapping or migrating a hugetlb page, and will change to use
huge_ptep_clear_flush() instead in the following patches.
So this is a preparation patch, which changes the huge_ptep_clear_flush()
to return the original pte to help to nuke a hugetlb page table.
[baolin.wang@linux.alibaba.com: fix build in several more architectures]
Link: https://lkml.kernel.org/r/0009a4cd-2826-e8be-e671-f050d4f18d5d@linux.alibaba.com
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20220511181531.7f27a5c1@canb.auug.org.au
Link: https://lkml.kernel.org/r/cover.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20f77ddab90baa249bd24504c413189b82acde69.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/cover.1652147571.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/dcf065868cce35bceaf138613ad27f17bb7c0c19.1652147571.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PA-RISC defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
No conflicts.
Build issue in drivers/net/ethernet/sfc/ptp.c
54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static")
49e6123c65da ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
This reverts commit a58e9d0984e8dad53f17ec73ae3c1cc7f8d88151.
Triggers segfaults with 32-bit kernels on PA8500 machines.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
MAX_ADDRESS (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
|
|
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
In commit 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and
enable CONFIG_NAMESPACES and CONFIG_USER_NS.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The inventory knows which CPUs are in the system, so this bitmask should
be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS.
Reset the cpu_possible_mask before scanning the system for CPUs, and
mark each existing CPU as possible during initialization of that CPU.
This avoids those warnings later on too:
register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
|
|
This reverts commit a9fe7fa7d874a536e0540469f314772c054a0323.
Leads to segfaults on 32bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This reverts commit d97180ad68bdb7ee10f327205a649bc2f558741d.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
|
