summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/44x/warp_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-06-29powerpc: Restore CONFIG_DEBUG_INFO in defconfigsChristophe Leroy1-1/+1
Commit f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs. It is now necessary to select one of the three DEBUG_INFO_DWARF* options to get DEBUG_INFO enabled. Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all defconfigs using the following command: sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/` Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu
2020-06-22powerpc/configs: Remove CMDLINE_BOOLChris Packham1-1/+0
Regenerate defconfigs to remove CONFIG_CMDLINE_BOOL and the default CONFIG_CMDLINE where applicable. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611224220.25066-3-chris.packham@alliedtelesis.co.nz
2019-07-03powerpc/configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski1-1/+0
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal1-1/+1
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-01-25firmware: Drop FIRMWARE_IN_KERNEL Kconfig optionBenjamin Gilbert1-1/+0
It doesn't actually do anything. Merge its help text into EXTRA_FIRMWARE. Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware") Fixes: 0946b2fb38fd ("firmware: cleanup FIRMWARE_IN_KERNEL message") Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman1-1/+0
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08powerpc/configs: Remove old symbols from defconfigsAndrew Donnellan1-4/+1
Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman1-21/+2
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-03-07powerpc: : Kill CONFIG_MTD_PARTITIONS송은봉1-1/+0
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-19net: fix IBM EMAC driver after rename.Tony Breeds1-2/+3
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30powerpc: Restore some misc devices to our configsStephen Rothwell1-0/+1
Uwe Kleine-König reported: while working on an defconfig (arm/mx27) I noticed that just updating it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that since commit v2.6.36-5965-g5f2365d (misc devices: do not enable by default) MISC_DEVICES isn't enabled anymore by default. So all defconfigs that have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same problem. This restores those misc devices to the powerpc defconfigs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Uwe Kleine-König Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-1/+1
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt1-1388/+1
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-04powerpc/44x: Update PowerPC 44x board defconfigsJosh Boyer1-70/+158
Update the 44x defconfig files for 2.6.33 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06powerpc/44x: Update Warp defconfigSean MacLennan1-43/+157
* Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-28Merge commit 'jwb/jwb-merge' into mergeBenjamin Herrenschmidt1-33/+105
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
2009-01-26eeprom: More consistent symbol namesJean Delvare1-2/+2
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-23powerpc/44x: Update PowerPC 44x defconfigsJosh Boyer1-34/+106
Update the 44x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-10-31powerpc/44x: Update 44x defconfigsJosh Boyer1-27/+55
Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-08-06powerpc/4xx: Update defconfig files for 2.6.27-rc1Josh Boyer1-68/+164
Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-15[POWERPC] 4xx: Reorganize 4xx defconfigsJosh Boyer1-0/+1110
Board specific defconfigs are useful, however with the ability to do multi-board defconfigs they aren't needed in the top level configs directory. Move the 4xx board specific defconfigs to individual directories under arch/powerpc/configs. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-28 05:04:32 +0300