summaryrefslogtreecommitdiff
path: root/arch/powerpc/kexec
AgeCommit message (Collapse)AuthorFilesLines
2024-02-24arch, crash: move arch_crash_save_vmcoreinfo() out to file vmcore_info.cBaoquan He3-28/+33
Nathan reported below building error: ===== $ curl -LSso .config https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.armv7 $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- olddefconfig all .. arm-linux-gnueabi-ld: arch/arm/kernel/machine_kexec.o: in function `arch_crash_save_vmcoreinfo': machine_kexec.c:(.text+0x488): undefined reference to `vmcoreinfo_append_str' ==== On architecutres, like arm, s390, ppc, sh, function arch_crash_save_vmcoreinfo() is located in machine_kexec.c and it can only be compiled in when CONFIG_KEXEC_CORE=y. That's not right because arch_crash_save_vmcoreinfo() is used to export arch specific vmcoreinfo. CONFIG_VMCORE_INFO is supposed to control its compiling in. However, CONFIG_VMVCORE_INFO could be independent of CONFIG_KEXEC_CORE, e.g CONFIG_PROC_KCORE=y will select CONFIG_VMVCORE_INFO. Or CONFIG_KEXEC/CONFIG_KEXEC_FILE is set while CONFIG_CRASH_DUMP is not set, it will report linking error. So, on arm, s390, ppc and sh, move arch_crash_save_vmcoreinfo out to a new file vmcore_info.c. Let CONFIG_VMCORE_INFO decide if compiling in arch_crash_save_vmcoreinfo(). [akpm@linux-foundation.org: remove stray newlines at eof] Link: https://lkml.kernel.org/r/20240129135033.157195-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240126045551.GA126645@dev-arch.thelio-3990X/T/#u Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-09Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of ↵Linus Torvalds3-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Quite a lot of kexec work this time around. Many singleton patches in many places. The notable patch series are: - nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio conversions for file paths'. - Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2: Folio conversions for directory paths'. - IA64 remnant removal in Heiko Carstens's 'Remove unused code after IA-64 removal'. - Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere in 'Treewide: enable -Wmissing-prototypes'. This had some followup fixes: - Nathan Chancellor has cleaned up the hexagon build in the series 'hexagon: Fix up instances of -Wmissing-prototypes'. - Nathan also addressed some s390 warnings in 's390: A couple of fixes for -Wmissing-prototypes'. - Arnd Bergmann addresses the same warnings for MIPS in his series 'mips: address -Wmissing-prototypes warnings'. - Baoquan He has made kexec_file operate in a top-down-fitting manner similar to kexec_load in the series 'kexec_file: Load kernel at top of system RAM if required' - Baoquan He has also added the self-explanatory 'kexec_file: print out debugging message if required'. - Some checkstack maintenance work from Tiezhu Yang in the series 'Modify some code about checkstack'. - Douglas Anderson has disentangled the watchdog code's logging when multiple reports are occurring simultaneously. The series is 'watchdog: Better handling of concurrent lockups'. - Yuntao Wang has contributed some maintenance work on the crash code in 'crash: Some cleanups and fixes'" * tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits) crash_core: fix and simplify the logic of crash_exclude_mem_range() x86/crash: use SZ_1M macro instead of hardcoded value x86/crash: remove the unused image parameter from prepare_elf_headers() kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE scripts/decode_stacktrace.sh: strip unexpected CR from lines watchdog: if panicking and we dumped everything, don't re-enable dumping watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting watchdog/hardlockup: adopt softlockup logic avoiding double-dumps kexec_core: fix the assignment to kimage->control_page x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init() lib/trace_readwrite.c:: replace asm-generic/io with linux/io nilfs2: cpfile: fix some kernel-doc warnings stacktrace: fix kernel-doc typo scripts/checkstack.pl: fix no space expression between sp and offset x86/kexec: fix incorrect argument passed to kexec_dprintk() x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs nilfs2: add missing set_freezable() for freezable kthread kernel: relay: remove relay_file_splice_read dead code, doesn't work docs: submit-checklist: remove all of "make namespacecheck" ...
2023-12-21kexec_file, power: print out debugging message if requiredBaoquan He2-13/+13
Then when specifying '-d' for kexec_file_load interface, loaded locations of kernel/initrd/cmdline etc can be printed out to help debug. Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file loading related codes. Link: https://lkml.kernel.org/r/20231213055747.61826-7-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Conor Dooley <conor@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-13powerpc: add cpu_spec.cpu_features to vmcoreinfoAditya Gupta1-0/+1
CPU features can be determined in makedumpfile, using 'cur_cpu_spec.cpu_features'. This provides more data to makedumpfile about the crashed system, and can help in filtering the vmcore accordingly. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230920105706.853626-2-adityag@linux.ibm.com
2023-12-11arch: remove ARCH_TASK_STRUCT_ON_STACKHeiko Carstens1-2/+1
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK. IA-64 was removed with commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"). Therefore remove support for ARCH_TASK_STRUCT_ON_STACK as well. Note: this also reveals a potential bug in powerpc code, which makes use of __init_task_data without selecting ARCH_TASK_STRUCT_ON_STACK which makes __init_task_data a no-op. This is broken since commit d11ed3ab3166 ("Expand INIT_TASK() in init/init_task.c and remove") from 2018 and needs to be addressed separately. Link: https://lkml.kernel.org/r/20231116133638.1636277-4-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-03Merge tag 'powerpc-6.7-1' of ↵Linus Torvalds3-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for KVM running as a nested hypervisor under development versions of PowerVM, using the new PAPR nested virtualisation API - Add support for the BPF prog pack allocator - A rework of the non-server MMU handling to support execute-only on all platforms - Some optimisations & cleanups for the powerpc qspinlock code - Various other small features and fixes Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin, Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant, Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan. * tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits) powerpc/vmcore: Add MMU information to vmcoreinfo Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo" powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free] powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack powerpc/bpf: implement bpf_arch_text_copy powerpc/code-patching: introduce patch_instructions() powerpc/32s: Implement local_flush_tlb_page_psize() powerpc/pseries: use kfree_sensitive() in plpks_gen_password() powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure powerpc/fsl_msi: Use device_get_match_data() powerpc: Remove cpm_dp...() macros powerpc/qspinlock: Rename yield_propagate_owner tunable powerpc/qspinlock: Propagate sleepy if previous waiter is preempted powerpc/qspinlock: don't propagate the not-sleepy state powerpc/qspinlock: propagate owner preemptedness rather than CPU number powerpc/qspinlock: stop queued waiters trying to set lock sleepy powerpc/perf: Fix disabling BHRB and instruction sampling powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh ...
2023-10-25powerpc/vmcore: Add MMU information to vmcoreinfoAditya Gupta1-0/+3
Since below commit, address mapping for vmemmap has changed for Radix MMU, where address mapping is stored in kernel page table itself, instead of earlier used 'vmemmap_list'. commit 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function") Hence with upstream kernel, in case of Radix MMU, makedumpfile fails to do address translation for vmemmap addresses, as it depended on vmemmap_list, which can now be empty. While fixing the address translation in makedumpfile, it was identified that currently makedumpfile cannot distinguish between Hash MMU and Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And hence fails to assign offsets and shifts correctly (such as in L4 to PGDIR offset calculation in makedumpfile). For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`. Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec` struct, to VMCOREINFO, so that makedumpfile can assign the offsets correctly, without needing a VMLINUX. Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel developers need to be cautious of changes to 'MMU_FTR_*' defines. A more stable approach was suggested in the below thread by contributors: https://lore.kernel.org/linuxppc-dev/20230920105706.853626-1-adityag@linux.ibm.com/ The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo This patch also implements the suggestion, by adding 'RADIX_MMU' in vmcoreinfo, which makedumpfile can use to get whether the crashed system had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which case 'NUMBER(RADIX_MMU)=0') Fixes: 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
2023-10-25Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"Michael Ellerman1-2/+0
This reverts commit 7135b921b32966d7602ede396b7286d372aee63f. I applied this commit prematurely while there was still discussion ongoing. Revert it so the final patch can be applied cleanly. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2023-10-19powerpc: Annotate endianness of various variables and functionsBenjamin Gray2-5/+5
Sparse reports several endianness warnings on variables and functions that are consistently treated as big endian. There are no multi-endianness shenanigans going on here so fix these low hanging fruit up in one patch. All changes are just type annotations; no endianness switching operations are introduced by this patch. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231011053711.93427-7-bgray@linux.ibm.com
2023-10-04crash_core: change the prototype of function parse_crashkernel()Baoquan He1-1/+1
Add two parameters 'low_size' and 'high' to function parse_crashkernel(), later crashkernel=,high|low parsing will be added. Make adjustments in all call sites of parse_crashkernel() in arch. Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Jiahao <chenjiahao16@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18powerpc: add `cur_cpu_spec` symbol to vmcoreinfoAditya Gupta1-0/+2
Presently, while reading a vmcore, makedumpfile uses `cur_cpu_spec.mmu_features` to decide whether the crashed system had RADIX MMU or not. Currently, makedumpfile fails to get the `cur_cpu_spec` symbol (unless a vmlinux is passed with the `-x` flag to makedumpfile), and hence assigns offsets and shifts (such as pgd_offset_l4) incorrecly considering MMU to be hash MMU. Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec` struct, to VMCOREINFO, so that the symbol address and offset is accessible to makedumpfile, without needing the vmlinux file Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Reported-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230911091409.415662-1-adityag@linux.ibm.com
2023-09-18powerpc/kexec_file: add missing of_node_putJulia Lawall1-2/+6
for_each_node_with_property performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. This was done using the Coccinelle semantic patch iterators/for_each_child.cocci Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230907095521.14053-7-Julia.Lawall@inria.fr
2023-08-18powerpc: Move DMA64_PROPNAME define to a headerMichal Suchanek1-4/+1
Avoid redefining the same value in multiple source. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230817162411.429-1-msuchanek@suse.de
2023-08-14powerpc: mark more local variables as volatileArnd Bergmann1-1/+1
A while ago I created a2305e3de8193 ("powerpc: mark local variables around longjmp as volatile") in order to allow building powerpc with -Wextra enabled on gcc-11. I tried this again with gcc-13 and found two more of the same issues, presumably based on slightly different optimization paths being taken here: arch/powerpc/xmon/xmon.c:3306:27: error: variable 'mm' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] arch/powerpc/kexec/crash.c:353:22: error: variable 'i' might be clobbered by 'longjmp' or 'vfork' [-Werror=clobbered] I checked a bunch of randconfigs and found only these two, so just address them the same way as the others. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230809131024.2039647-1-arnd@kernel.org
2023-08-02powerpc/kexec: fix minor typoLaurent Dufour1-3/+3
Function name in the descriptor was not correct. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307251721.bUGcsCeQ-lkp@intel.com/ Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230725132759.53975-1-ldufour@linux.ibm.com
2023-08-02powerpc: Explicitly include correct DT includesRob Herring2-2/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Fixup maple/setup.c which needs platform_device] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
2023-02-15powerpc/kexec_file: print error string on usable memory property update failureSourabh Jain1-1/+2
Print the FDT error description along with the error message if failed to set the "linux,drconf-usable-memory" property in the kdump kernel's FDT. Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221216122708.182154-1-sourabhjain@linux.ibm.com
2023-02-12powerpc/pseries: Pass PLPKS password on kexecRussell Currey1-5/+13
Before interacting with the PLPKS, we ask the hypervisor to generate a password for the current boot, which is then required for most further PLPKS operations. If we kexec into a new kernel, the new kernel will try and fail to generate a new password, as the password has already been set. Pass the password through to the new kernel via the device tree, in /chosen/ibm,plpks-pw. Check for the presence of this property before trying to generate a new password - if it exists, use the existing password and remove it from the device tree. This only works with the kexec_file_load() syscall, not the older kexec_load() syscall, however if you're using Secure Boot then you want to be using kexec_file_load() anyway. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
2023-02-06powerpc/kexec_file: fix implicit decl errorRandy Dunlap1-0/+1
kexec (PPC64) code calls memory_hotplug_max(). Add the header declaration for it from <asm/mmzone.h>. Using <linux/mmzone.h> does not work since the #include for <asm/mmzone.h> depends on CONFIG_NUMA=y, which is not always set. Fixes this build error/warning: arch/powerpc/kexec/file_load_64.c: In function 'kexec_extra_fdt_size_ppc64': arch/powerpc/kexec/file_load_64.c:993:33: error: implicit declaration of function 'memory_hotplug_max' 993 | usm_entries = ((memory_hotplug_max() / drmem_lmb_size()) + | ^~~~~~~~~~~~~~~~~~ Fixes: fc546faa5595 ("powerpc/kexec_file: Count hot-pluggable memory in FDT estimate") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230204172206.7662-1-rdunlap@infradead.org
2023-02-01powerpc/kexec_file: Count hot-pluggable memory in FDT estimateSourabh Jain1-1/+1
On Systems where online memory is lesser compared to max memory, the kexec_file_load system call may fail to load the kdump kernel with the below errors: "Failed to update fdt with linux,drconf-usable-memory property" "Error setting up usable-memory property for kdump kernel" This happens because the size estimation for usable memory properties for the kdump kernel's FDT is based on the online memory whereas the usable memory properties include max memory. In short, the hot-pluggable memory is not accounted for while estimating the size of the usable memory properties. The issue is addressed by calculating usable memory property size using max hotplug address instead of the last online memory address. Fixes: 2377c92e37fe ("powerpc/kexec_file: fix FDT size estimation for kdump kernel") Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230131030615.729894-1-sourabhjain@linux.ibm.com
2023-01-31powerpc/kexec_file: Fix division by zero in extra size estimationMichael Ellerman1-4/+7
In kexec_extra_fdt_size_ppc64() there's logic to estimate how much extra space will be needed in the device tree for some memory related properties. That logic uses the size of RAM divided by drmem_lmb_size() to do the estimation. However drmem_lmb_size() can be zero if the machine has no hotpluggable memory configured, which is the case when booting with qemu and no maxmem=x parameter is passed (the default). The division by zero is reported by UBSAN, and can also lead to an overflow and a warning from kvmalloc, and kdump kernel loading fails: WARNING: CPU: 0 PID: 133 at mm/util.c:596 kvmalloc_node+0x15c/0x160 Modules linked in: CPU: 0 PID: 133 Comm: kexec Not tainted 6.2.0-rc5-03455-g07358bd97810 #223 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-dd0dca pSeries NIP: c00000000041ff4c LR: c00000000041fe58 CTR: 0000000000000000 REGS: c0000000096ef750 TRAP: 0700 Not tainted (6.2.0-rc5-03455-g07358bd97810) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24248242 XER: 2004011e CFAR: c00000000041fed0 IRQMASK: 0 ... NIP kvmalloc_node+0x15c/0x160 LR kvmalloc_node+0x68/0x160 Call Trace: kvmalloc_node+0x68/0x160 (unreliable) of_kexec_alloc_and_setup_fdt+0xb8/0x7d0 elf64_load+0x25c/0x4a0 kexec_image_load_default+0x58/0x80 sys_kexec_file_load+0x5c0/0x920 system_call_exception+0x128/0x330 system_call_vectored_common+0x15c/0x2ec To fix it, skip the calculation if drmem_lmb_size() is zero. Fixes: 2377c92e37fe ("powerpc/kexec_file: fix FDT size estimation for kdump kernel") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230130014707.541110-1-mpe@ellerman.id.au
2022-12-19Merge tag 'powerpc-6.2-1' of ↵Linus Torvalds1-1/+58
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details - Enable objtool to be built on powerpc to generate mcount locations - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI - Sanitise user registers on interrupt entry on 64-bit Book3S - Many other small features and fixes Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, and Wolfram Sang. * tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits) powerpc/code-patching: Fix oops with DEBUG_VM enabled powerpc/qspinlock: Fix 32-bit build powerpc/prom: Fix 32-bit build powerpc/rtas: mandate RTAS syscall filtering powerpc/rtas: define pr_fmt and convert printk call sites powerpc/rtas: clean up includes powerpc/rtas: clean up rtas_error_log_max initialization powerpc/pseries/eeh: use correct API for error log size powerpc/rtas: avoid scheduling in rtas_os_term() powerpc/rtas: avoid device tree lookups in rtas_os_term() powerpc/rtasd: use correct OF API for event scan rate powerpc/rtas: document rtas_call() powerpc/pseries: unregister VPA when hot unplugging a CPU powerpc/pseries: reset the RCU watchdogs after a LPM powerpc: Take in account addition CPU node when building kexec FDT powerpc: export the CPU node count powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state powerpc/dts/fsl: Fix pca954x i2c-mux node names cxl: Remove unnecessary cxl_pci_window_alignment() selftests/powerpc: Fix resource leaks ...
2022-12-07powerpc: Take in account addition CPU node when building kexec FDTLaurent Dufour1-1/+58
On a system with a large number of CPUs, the creation of the FDT for a kexec kernel may fail because the allocated FDT is not large enough. When this happens, such a message is displayed on the console: Unable to add ibm,processor-vadd-size property: FDT_ERR_NOSPACE The property's name may change depending when the buffer overwrite is detected. Obviously the created FDT is missing information, and it is expected that system dump or kexec kernel failed to run properly. When the FDT is allocated, the size of the FDT the kernel received at boot time is used and an extra size can be applied. Currently, only memory added after boot time is taken in account, not the CPU nodes. The extra size should take in account these additional CPU nodes and compute the required extra space. To achieve that, the size of a CPU node, including its subnode is computed once and multiplied by the number of additional CPU nodes. The assumption is that the size of the CPU node is _same_ for all the node, the only variable part should be the name "PowerPC,POWERxx@##" where "##" may vary a little. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> [mpe: Don't shadow function name w/variable, minor coding style changes] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221110180619.15796-3-ldufour@linux.ibm.com
2022-11-19kexec: replace crash_mem_range with rangeLi Chen2-5/+5
We already have struct range, so just use it. Link: https://lkml.kernel.org/r/20220929042936.22012-4-bhe@redhat.com Signed-off-by: Li Chen <lchen@ambarella.com> Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Chen Lifu <chenlifu@huawei.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Jianglei Nie <niejianglei2021@163.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: ye xingchen <ye.xingchen@zte.com.cn> Cc: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28powerpc/64/kdump: Limit kdump base to 512MBHari Bathini1-3/+3
Since commit e641eb03ab2b0 ("powerpc: Fix up the kdump base cap to 128M") memory for kdump kernel has been reserved at an offset of 128MB. This held up well for a long time before running into boot failure on LPARs having a lot of cores. Commit 7c5ed82b800d8 ("powerpc: Set crashkernel offset to mid of RMA region") fixed this boot failure by moving the offset to mid of RMA region. This change meant the offset is either 256MB or 512MB on LPARs as ppc64_rma_size was 512MB or 1024MB owing to commit 103a8542cb35b ("powerpc/book3s64/ radix: Fix boot failure with large amount of guest memory"). But ppc64_rma_size can be larger as well with newer f/w. So, limit crashkernel reservation offset to 512MB to avoid running into boot failures during kdump kernel boot, due to RTAS or other allocation restrictions. Also, while here, use SZ_128M instead of opening coding it. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220912065031.57416-1-hbathini@linux.ibm.com
2022-09-26powerpc: Remove CONFIG_PPC_BOOK3EChristophe Leroy1-1/+1
CONFIG_PPC_BOOK3E is redundant with CONFIG_PPC_BOOK3E_64. The later is more explicit about the fact that it's a 64 bits target. Remove CONFIG_PPC_BOOK3E. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5d0891490813c19cdcfc04678f512ea68cba3e64.1663606876.git.christophe.leroy@csgroup.eu
2022-09-26powerpc: Remove CONFIG_FSL_BOOKEChristophe Leroy2-3/+3
PPC_85xx is PPC32 only. PPC_85xx always selects E500 and is the only PPC32 that selects E500. FSL_BOOKE is selected when E500 and PPC32 are selected. So FSL_BOOKE is redundant with PPC_85xx. Remove FSL_BOOKE. And rename four files accordingly. cpu_setup_fsl_booke.S is not renamed because it is linked to PPC_FSL_BOOK3E and not to FSL_BOOKE as suggested by its name. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/08e3e15594e66d63b9e89c5b4f9c35153913c28f.1663606875.git.christophe.leroy@csgroup.eu
2022-08-10powerpc/kexec: Fix build failure from uninitialised variableRussell Currey1-5/+5
clang 14 won't build because ret is uninitialised and can be returned if both prop and fdtprop are NULL. Drop the ret variable and return an error in that failure case. Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220810054331.373761-1-ruscur@russell.cc
2022-08-03powerpc/64e: Fix kexec build errorMichael Ellerman1-0/+1
When building ppc64_book3e_allmodconfig the build fails with: arch/powerpc/kexec/file_load_64.c:1063:14: error: implicit declaration of function ‘firmware_has_feature’ 1063 | if (!firmware_has_feature(FW_FEATURE_LPAR)) | ^~~~~~~~~~~~~~~~~~~~ Add a direct include of asm/firmware.h to fix the error. Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220803063152.1249270-1-mpe@ellerman.id.au
2022-07-28pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-windowAlexey Kardashevskiy1-0/+54
The pseries platform uses 32bit default DMA window (always 4K pages) and optional 64bit DMA window available via DDW ("Dynamic DMA Windows"), 64K or 2M pages. For ages the default one was not removed and a huge window was created in addition. Things changed with SRIOV-enabled PowerVM which creates a default-and-bigger DMA window in 64bit space (still using 4K pages) for IOV VFs so certain OSes do not need to use the DDW API in order to utilize all available TCE budget. Linux on the other hand removes the default window and creates a bigger one (with more TCEs or/and a bigger page size - 64K/2M) in a bid to map the entire RAM, and if the new window size is smaller than that - it still uses this new bigger window. The result is that the default window is removed but the "ibm,dma-window" property is not. When kdump is invoked, the existing code tries reusing the existing 64bit DMA window which location and parameters are stored in the device tree but this fails as the new property does not make it to the kdump device tree blob. So the code falls back to the default window which does not exist anymore although the device tree says that it does. The result of that is that PCI devices become unusable and cannot be used for kdumping. This preserves the DMA64 and DIRECT64 properties in the device tree blob for the crash kernel. Since the crash kernel setup is done after device drivers are loaded and probed, the proper DMA config is stored at least for boot time devices. Because DDW window is optional and the code configures the default window first, the existing code creates an IOMMU table descriptor for the non-existing default DMA window. It is harmless for kdump as it does not touch the actual window (only reads what is mapped and marks those IO pages as used) but it is bad for kexec which clears it thinking it is a smaller default window rather than a bigger DDW window. This removes the "ibm,dma-window" property from the device tree after a bigger window is created and the crash kernel setup picks it up. Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220629060614.1680476-1-aik@ozlabs.ru
2022-07-28powerpc/crash: save cpu register data in crash_smp_send_stop()Hari Bathini1-30/+47
During kdump, two set of NMI IPIs are sent to secondary CPUs, if 'crash_kexec_post_notifiers' option is set. The first set of NMI IPIs to stop the CPUs and the other set to collect register data. Instead, capture register data for secondary CPUs while stopping them itself. Also, fallback to smp_send_stop() in case the function gets called without kdump configured. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220630064942.192283-1-hbathini@linux.ibm.com
2022-06-29powerpc: Include asm/firmware.h in all users of firmware_has_feature()Christophe Leroy1-0/+1
Trying to remove asm/ppc_asm.h from all places that don't need it leads to several failures linked to firmware_has_feature(). To fix it, include asm/firmware.h in all files using firmware_has_feature() All users found with: git grep -L "firmware\.h" ` git grep -l "firmware_has_feature("` Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/11956ec181a034b51a881ac9c059eea72c679a73.1651828453.git.christophe.leroy@csgroup.eu
2022-06-20powerpc: Don't include asm/setup.h in asm/machdep.hChristophe Leroy1-0/+1
asm/machdep.h doesn't need asm/setup.h Remove it. Add it directly in files that needs it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
2022-05-29powerpc/kasan: Mark more real-mode code as not to be instrumentedPaul Mackerras1-1/+1
This marks more files and functions that can possibly be called in real mode as not to be instrumented by KASAN. Most were found by inspection, except for get_pseries_errorlog() which was reported as causing a crash in testing. Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoX1kZPnmUX4RZEK@cleo
2022-05-22powerpc/kasan: Disable address sanitization in kexec pathsDaniel Axtens1-0/+2
The kexec code paths involve code that necessarily run in real mode, as CPUs are disabled and control is transferred to the new kernel. Disable address sanitization for the kexec code and the functions called in real mode on CPUs being disabled. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
2022-05-08powerpc: Add missing headersChristophe Leroy1-1/+1
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy2-2/+0
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2022-05-05powerpc: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2022-03-08powerpc: Move C prototypes out of asm-prototypes.hChristophe Leroy1-1/+0
We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc: Introduce asm-prototypes.h"). It's purpose was for prototypes of C functions that are only called from asm, in order to fix sparse warnings about missing prototypes. A few months later Nick added a different use case in commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm") for C prototypes for exported asm functions. This is basically the inverse of our original usage. Since then we've added various prototypes to asm-prototypes.h for both reasons, meaning we now need to unstitch it all. Dispatch prototypes of C functions into relevant headers and keep only the prototypes for functions defined in assembly. For the time being, leave prom_init() there because moving it into asm/prom.h or asm/setup.h conflicts with drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o This will be fixed later by untaggling asm/pci.h and asm/prom.h or by renaming the function in shadowrom.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
2022-03-07powerpc/kexec: Declare kexec_paca staticChristophe Leroy1-1/+1
kexec_paca is exclusively used in kexec/core_64.c Declare it static. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/094983ee851644165b7700c73cac63cfe20596cd.1646413435.git.christophe.leroy@csgroup.eu
2022-02-07powerpc: Set crashkernel offset to mid of RMA regionSourabh Jain1-4/+11
On large config LPARs (having 192 and more cores), Linux fails to boot due to insufficient memory in the first memblock. It is due to the memory reservation for the crash kernel which starts at 128MB offset of the first memblock. This memory reservation for the crash kernel doesn't leave enough space in the first memblock to accommodate other essential system resources. The crash kernel start address was set to 128MB offset by default to ensure that the crash kernel get some memory below the RMA region which is used to be of size 256MB. But given that the RMA region size can be 512MB or more, setting the crash kernel offset to mid of RMA size will leave enough space for the kernel to allocate memory for other system resources. Since the above crash kernel offset change is only applicable to the LPAR platform, the LPAR feature detection is pushed before the crash kernel reservation. The rest of LPAR specific initialization will still be done during pseries_probe_fw_features as usual. This patch is dependent on changes to paca allocation for boot CPU. It expect boot CPU to discover 1T segment support which is introduced by the patch posted here: https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
2021-12-23powerpc/kernel: Add __init attribute to eligible functionsNick Child1-1/+1
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
2021-12-09powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMUNicholas Piggin2-3/+3
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves 128kB kernel image size (90kB text) on powernv_defconfig minus KVM, 350kB on pseries_defconfig minus KVM, 40kB on a tiny config. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG. Fix radix_enabled() use in setup_initial_memory_limit(). Add some stubs to reduce number of ifdefs.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
2021-10-22powerpc/machdep: Remove stale functions from ppc_md structureChristophe Leroy3-15/+2
ppc_md.iommu_save() is not set anymore by any platform after commit c40785ad305b ("powerpc/dart: Use a cachable DART"). So iommu_save() has become a nop and can be removed. ppc_md.show_percpuinfo() is not set anymore by any platform after commit 4350147a816b ("[PATCH] ppc64: SMU based macs cpufreq support"). Last users of ppc_md.rtc_read_val() and ppc_md.rtc_write_val() were removed by commit 0f03a43b8f0f ("[POWERPC] Remove todc code from ARCH=powerpc") Last user of kgdb_map_scc() was removed by commit 17ce452f7ea3 ("kgdb, powerpc: arch specific powerpc kgdb support"). ppc.machine_kexec_prepare() has not been used since commit 8ee3e0d69623 ("powerpc: Remove the main legacy iSerie platform code"). This allows the removal of machine_kexec_prepare() and the rename of default_machine_kexec_prepare() into machine_kexec_prepare() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Daniel Axtens <dja@axtens.net> [mpe: Drop prototype for default_machine_kexec_prepare() as noted by dja] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/24d4ca0ada683c9436a5f812a7aeb0a1362afa2b.1630398606.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/kexec_file: Add of_node_put() before gotoWan Jiabing1-0/+1
Fix following coccicheck warning: ./arch/powerpc/kexec/file_load_64.c:698:1-22: WARNING: Function for_each_node_by_type should have of_node_put() before goto Early exits from for_each_node_by_type should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211018015418.10182-1-wanjiabing@vivo.com
2021-09-03Merge tag 'powerpc-5.15-1' of ↵Linus Torvalds2-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Convert pseries & powernv to use MSI IRQ domains. - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are given a CPU number on the same node as previously, when possible. - Add support for a new more flexible device-tree format for specifying NUMA distances. - Convert powerpc to GENERIC_PTDUMP. - Retire sbc8548 and sbc8641d board support. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, and Zheng Yongjun. * tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits) powerpc/bug: Cast to unsigned long before passing to inline asm powerpc/ptdump: Fix generic ptdump for 64-bit KVM: PPC: Fix clearing never mapped TCEs in realmode powerpc/pseries/iommu: Rename "direct window" to "dma window" powerpc/pseries/iommu: Make use of DDW for indirect mapping powerpc/pseries/iommu: Find existing DDW with given property name powerpc/pseries/iommu: Update remove_dma_window() to accept property name powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() powerpc/pseries/iommu: Allow DDW windows starting at 0x00 powerpc/pseries/iommu: Add ddw_list_new_entry() helper powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper powerpc/kernel/iommu: Add new iommu_table_in_use() helper powerpc/pseries/iommu: Replace hard-coded page shift powerpc/numa: Update cpu_cpu_map on CPU online/offline powerpc/numa: Print debug statements only when required powerpc/numa: convert printk to pr_xxx powerpc/numa: Drop dbg in favour of pr_debug powerpc/smp: Enable CACHE domain for shared processor powerpc/smp: Update cpu_core_map on all PowerPc systems ...
2021-08-30Merge branch 'rework/printk_safe-removal' into for-linusPetr Mladek1-1/+1
2021-08-25powerpc: Avoid link stack corruption in misc asm functionsChristophe Leroy1-6/+6
bl;mflr is used at several places to get code position. Use bcl 20,31,+4 instead of bl in order to preserve link stack. See commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption in __get_datapage()") for details. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c6eabb4fb6c156f75d56dcbcc6f243e5ac0fba42.1629791763.git.christophe.leroy@csgroup.eu
2021-08-10powerpc/kexec: fix for_each_child.cocci warningkernel test robot1-1/+3
for_each_node_by_type should have of_node_put() before return. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2108031654080.17639@hadrien
2021-07-26printk: remove NMI trackingJohn Ogness1-1/+1
All NMI contexts are handled the same as the safe context: store the message and defer printing. There is no need to have special NMI context tracking for this. Using in_nmi() is enough. There are several parts of the kernel that are manually calling into the printk NMI context tracking in order to cause general printk deferred printing: arch/arm/kernel/smp.c arch/powerpc/kexec/crash.c kernel/trace/trace.c For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new function pair printk_deferred_enter/exit that explicitly achieves the same objective. For ftrace, remove the printk context manipulation completely. It was added in commit 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when accessing the main log buffer in NMI"). The purpose was to enforce storing messages directly into the ring buffer even in NMI context. It really should have only modified the behavior in NMI context. There is no need for a special behavior any longer. All messages are always stored directly now. The console deferring is handled transparently in vprintk(). Signed-off-by: John Ogness <john.ogness@linutronix.de> [pmladek@suse.com: Remove special handling in ftrace.c completely. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-27 00:32:08 +0300