| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Binutils-2.38 and GCC-12.1.0 bumped[0][1] the default ISA spec to the newer
20191213 version which moves some instructions from the I extension to the
Zicsr and Zifencei extensions. So if one of the binutils and GCC exceeds
that version, we should explicitly specifying Zicsr and Zifencei via -march
to cope with the new changes. but this only occurs when binutils >= 2.36
and GCC >= 11.1.0. It's a different story when binutils < 2.36.
binutils-2.36 supports the Zifencei extension[2] and splits Zifencei and
Zicsr from I[3]. GCC-11.1.0 is particular[4] because it add support Zicsr
and Zifencei extension for -march. binutils-2.35 does not support the
Zifencei extension, and does not need to specify Zicsr and Zifencei when
working with GCC >= 12.1.0.
To make our lives easier, let's relax the check to binutils >= 2.36 in
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI. For the other two cases,
where clang < 17 or GCC < 11.1.0, we will deal with them in
CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC.
For more information, please refer to:
commit 6df2a016c0c8 ("riscv: fix build with binutils 2.38")
commit e89c2e815e76 ("riscv: Handle zicsr/zifencei issues between clang and binutils")
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc [0]
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=98416dbb0a62579d4a7a4a76bab51b5b52fec2cd [1]
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=5a1b31e1e1cee6e9f1c92abff59cdcfff0dddf30 [2]
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=729a53530e86972d1143553a415db34e6e01d5d2 [3]
Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=b03be74bad08c382da47e048007a78fa3fb4ef49 [4]
Link: https://lore.kernel.org/all/20230308220842.1231003-1-conor@kernel.org
Link: https://lore.kernel.org/all/20230223220546.52879-1-conor@kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mingzheng Xing <xingmingzheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230809165648.21071-1-xingmingzheng@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The independent softirq stack uses s0 to save & restore sp, but s0 would
be corrupted when CONFIG_FRAME_POINTER=n. So add s0 in the clobber list
to fix the problem.
Fixes: dd69d07a5a6c ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Cc: stable@vger.kernel.org
Reported-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230716001506.3506041-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The independent irq stack uses s0 to save & restore sp, but s0 would be
corrupted when CONFIG_FRAME_POINTER=n. So add s0 in the clobber list to
fix the problem.
Fixes: 163e76cc6ef4 ("riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK")
Cc: stable@vger.kernel.org
Reported-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230716001506.3506041-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When we test seccomp with 6.4 kernel, we found errno has wrong value.
If we deny NETLINK_AUDIT with EAFNOSUPPORT, after f0bddf50586d, we will
get ENOSYS instead. We got same result with commit 9c2598d43510 ("riscv:
entry: Save a0 prior syscall_enter_from_user_mode()").
After analysing code, we think that regs->a0 = -ENOSYS should only be
executed when syscall != -1. In __seccomp_filter, when seccomp rejected
this syscall with specified errno, they will set a0 to return number as
syscall ABI, and then return -1. This return number is finally pass as
return number of syscall_enter_from_user_mode, and then is compared with
NR_syscalls after converted to ulong (so it will be ULONG_MAX). The
condition syscall < NR_syscalls will always be false, so regs->a0 = -ENOSYS
is always executed. It covered a0 set by seccomp, so we always get
ENOSYS when match seccomp RET_ERRNO rule.
Fixes: f0bddf50586d ("riscv: entry: Convert to generic entry")
Reported-by: Felix Yan <felixonmars@archlinux.org>
Co-developed-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Ruizhe Pan <c141028@gmail.com>
Co-developed-by: Shiqi Zhang <shiqi@isrc.iscas.ac.cn>
Signed-off-by: Shiqi Zhang <shiqi@isrc.iscas.ac.cn>
Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com>
Tested-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230801141607.435192-1-CoelacanthusHex@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
commit 914d6f44fc50 ("RISC-V: only iterate over possible CPUs in ISA
string parser") changed riscv_fill_hwcap() from iterating over CPU DT
nodes to iterating over logical CPU IDs. Since this function runs long
before cpu_dev_init() creates CPU devices, it hits the fallback path in
of_cpu_device_node_get(), which itself iterates over the DT nodes,
searching for a node with the requested CPU ID. (Incidentally, this
makes riscv_fill_hwcap() now take quadratic time.)
riscv_fill_hwcap() passes a logical CPU ID to of_cpu_device_node_get(),
which uses the arch_match_cpu_phys_id() hook to translate the logical ID
to a physical ID as found in the DT.
arch_match_cpu_phys_id() has a generic weak definition, and RISC-V
provides a strong definition using cpuid_to_hartid_map(). However, the
RISC-V specific implementation is located in arch/riscv/kernel/smp.c,
and that file is only compiled when SMP is enabled.
As a result, when SMP is disabled, the generic definition is used, and
riscv_isa gets initialized based on the ISA string of hart 0, not the
boot hart. On FU740, this means has_fpu() returns false, and userspace
crashes when trying to use floating-point instructions.
Fix this by moving arch_match_cpu_phys_id() to a file which is always
compiled.
Fixes: 70114560b285 ("RISC-V: Add RISC-V specific arch_match_cpu_phys_id")
Fixes: 914d6f44fc50 ("RISC-V: only iterate over possible CPUs in ISA string parser")
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230803012608.3540081-1-samuel.holland@sifive.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Petr Tesarik <petrtesarik@huaweicloud.com> says:
From: Petr Tesarik <petr.tesarik.ext@huawei.com>
The kexec_file_load(2) syscall does not work at least in some kernel
builds. For details see the relevant section in this blog post:
https://sigillatum.tesarici.cz/2023-07-21-state-of-riscv64-kdump.html
This patch series handles an additional relocation types, removes the need
to implement a Global Offset Table (GOT) for the purgatory and fixes the
placement of initrd.
* b4-shazam-merge:
riscv/kexec: load initrd high in available memory
riscv/kexec: handle R_RISCV_CALL_PLT relocation type
Link: https://lore.kernel.org/r/cover.1690365011.git.petr.tesarik.ext@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When initrd is loaded low, the secondary kernel fails like this:
INITRD: 0xdc581000+0x00eef000 overlaps in-use memory region
This initrd load address corresponds to the _end symbol, but the
reservation is aligned on PMD_SIZE, as explained by a comment in
setup_bootmem().
It is technically possible to align the initrd load address accordingly,
leaving a hole between the end of kernel and the initrd, but it is much
simpler to allocate the initrd top-down.
Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/67c8eb9eea25717c2c8208d9bfbfaa39e6e2a1c6.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
R_RISCV_CALL has been deprecated and replaced by R_RISCV_CALL_PLT. See Enum
18-19 in Table 3. Relocation types here:
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc
It was deprecated in ("Deprecated R_RISCV_CALL, prefer R_RISCV_CALL_PLT"):
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a0dced85018d7a0ec17023c9389cbd70b1dbc1b0
Recent tools (at least GNU binutils-2.40) already use R_RISCV_CALL_PLT.
Kernels built with such binutils fail kexec_load_file(2) with:
kexec_image: Unknown rela relocation: 19
kexec_image: Error loading purgatory ret=-8
The binary code at the call site remains the same, so tell
arch_kexec_apply_relocations_add() to handle _PLT alike.
Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Cc: Li Zhengyu <lizhengyu3@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/b046b164af8efd33bbdb7d4003273bdf9196a5b0.1690365011.git.petr.tesarik.ext@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since RISC-V Linux v6.4, the commit 3335068f8721 ("riscv: Use
PUD/P4D/PGD pages for the linear mapping") changes phys_ram_base
from the physical start of the kernel to the actual start of the DRAM.
The Crash-utility's VTOP() still uses phys_ram_base and kernel_map.virt_addr
to translate kernel virtual address, that failed the Crash with Linux v6.4 [1].
Export kernel_map.va_kernel_pa_offset in vmcoreinfo to help Crash translate
the kernel virtual address correctly.
Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Link: https://lore.kernel.org/linux-riscv/20230724040649.220279-1-suagrfillet@gmail.com/ [1]
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230724100917.309061-1-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
acpi_os_ioremap() currently is a wrapper to memremap() on
RISC-V. But the callers of acpi_os_ioremap() expect it to
return __iomem address and hence sparse tool reports a new
warning. Fix this issue by type casting to __iomem type.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307230357.egcTAefj-lkp@intel.com/
Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230724100346.1302937-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ACPI ISA strings are based on a specification after Zicsr and Zifencei
were split out of I, so we shouldn't be treating them as part of I. We
haven't release an ACPI-based kernel yet, so we don't need to worry
about compatibility with the old ISA strings.
Fixes: 07edc32779e3 ("RISC-V: always report presence of extensions formerly part of the base ISA")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230711224600.10879-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- A bunch of fixes/cleanups from the first part of the merge window,
mostly related to ACPI and vector as those were large
- Some documentation improvements, mostly related to the new code
- The "riscv,isa" DT key is deprecated
- Support for link-time dead code elimination
- Support for minor fault registration in userfaultd
- A handful of cleanups around CMO alternatives
* tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (23 commits)
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
riscv: Select HAVE_ARCH_USERFAULTFD_MINOR
RISC-V: Document the ISA string parsing rules for ACPI
risc-v: Fix order of IPI enablement vs RCU startup
mm: riscv: fix an unsafe pte read in huge_pte_alloc()
dt-bindings: riscv: deprecate riscv,isa
RISC-V: drop error print from riscv_hartid_to_cpuid()
riscv: Discard vector state on syscalls
riscv: move memblock_allow_resize() after linear mapping is ready
riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idle
riscv: vdso: include vdso/vsyscall.h for vdso_data
selftests: Test RISC-V Vector's first-use handler
riscv: vector: clear V-reg in the first-use trap
riscv: vector: only enable interrupts in the first-use trap
RISC-V: Fix up some vector state related build failures
RISC-V: Document that V registers are clobbered on syscalls
riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD
riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
...
|
|
Conor reports that risc-v tries to enable IPIs before telling the
core code to enable RCU. With the introduction of the mapple tree
as a backing store for the irq descriptors, this results in
a very shouty boot sequence, as RCU is legitimately upset.
Restore some sanity by moving the risc_ipi_enable() call after
notify_cpu_starting(), which explicitly enables RCU on the calling
CPU.
Fixes: 832f15f42646 ("RISC-V: Treat IPIs as normal Linux IRQs")
Reported-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230703-dupe-frying-79ae2ccf94eb@spud
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230703183126.1567625-1-maz@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As of commit 2ac874343749 ("RISC-V: split early & late of_node to
hartid mapping") my CI complains about newly added pr_err() messages
during boot, for example:
[ 0.000000] Couldn't find cpu id for hartid [0]
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
Before the split, riscv_of_processor_hartid() contained a check for
whether the cpu was "available", before calling riscv_hartid_to_cpuid(),
but after the split riscv_of_processor_hartid() can be called for cpus
that are disabled.
Most callers of riscv_hartid_to_cpuid() already report custom errors
where it falls, making this print superfluous in those case. In other
places, the print adds nothing - see riscv_intc_init() for example.
Fixes: 2ac874343749 ("RISC-V: split early & late of_node to hartid mapping")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230629-paternity-grafted-b901b76d04a0@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The RISC-V vector specification states:
Executing a system call causes all caller-saved vector registers
(v0-v31, vl, vtype) and vstart to become unspecified.
The vector registers are set to all 1s, vill is set (invalid), and the
vector status is set to Dirty.
That way we can prevent userspace from accidentally relying on the
stated save.
Rémi pointed out [1] that writing to the registers might be
superfluous, and setting vill is sufficient.
Link: https://lore.kernel.org/linux-riscv/12784326.9UPPK3MAeB@basile.remlab.net/ # [1]
Suggested-by: Darius Rad <darius@bluespec.com>
Suggested-by: Palmer Dabbelt <palmer@rivosinc.com>
Suggested-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230629142228.1125715-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add include of <vdso/vsyscall.h> to pull in the defition of vdso_data
to remove the following sparse warning:
arch/riscv/kernel/vdso.c:39:18: warning: symbol 'vdso_data' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230616114357.159601-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If there is no context switch happens after we enable V for a process,
then we return to user space with whatever left on the CPU's V registers
accessible to the process. The leaked data could belong to another
process's V-context saved from last context switch, impacting process's
confidentiality on the system.
To prevent this from happening, we clear V registers by restoring
zero'd V context after turining on V.
Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230627015556.12329-2-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The function irqentry_exit_to_user_mode() must be called with interrupt
disabled. The caller of do_trap_insn_illegal() also assumes running
without interrupts. So, we should turn off interrupts after
riscv_v_first_use_handler() returns.
Fixes: cd054837243b ("riscv: Allocate user's vector context in the first-use trap")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230625155416.18629-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Jisheng Zhang <jszhang@kernel.org> says:
When trying to run linux with various opensource riscv core on
resource limited FPGA platforms, for example, those FPGAs with less
than 16MB SDRAM, I want to save mem as much as possible. One of the
major technologies is kernel size optimizations, I found that riscv
does not currently support HAVE_LD_DEAD_CODE_DATA_ELIMINATION, which
passes -fdata-sections, -ffunction-sections to CFLAGS and passes the
--gc-sections flag to the linker.
This not only benefits my case on FPGA but also benefits defconfigs.
Here are some notable improvements from enabling this with defconfigs:
nommu_k210_defconfig:
text data bss dec hex
1112009 410288 59837 1582134 182436 before
962838 376656 51285 1390779 1538bb after
rv32_defconfig:
text data bss dec hex
8804455 2816544 290577 11911576 b5c198 before
8692295 2779872 288977 11761144 b375f8 after
defconfig:
text data bss dec hex
9438267 3391332 485333 13314932 cb2b74 before
9285914 3350052 483349 13119315 c82f53 after
patch1 and patch2 are clean ups.
patch3 fixes a typo.
patch4 finally enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for riscv.
* b4-shazam-merge:
riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD
riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
vmlinux.lds.h: use correct .init.data.* section name
riscv: vmlinux-xip.lds.S: remove .alternative section
riscv: move options to keep entries sorted
riscv: Fix orphan section warnings caused by kernel/pi
Link: https://lore.kernel.org/r/20230523165502.2592-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add new feature to have function graph tracer record the return
value. Adds a new option: funcgraph-retval ; when set, will show the
return value of a function in the function graph tracer.
- Also add the option: funcgraph-retval-hex where if it is not set, and
the return value is an error code, then it will return the decimal of
the error code, otherwise it still reports the hex value.
- Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd
That when a application opens it, it becomes the task that the timer
lat tracer traces. The application can also read this file to find
out how it's being interrupted.
- Add the file /sys/kernel/tracing/available_filter_functions_addrs
that works just the same as available_filter_functions but also shows
the addresses of the functions like kallsyms, except that it gives
the address of where the fentry/mcount jump/nop is. This is used by
BPF to make it easier to attach BPF programs to ftrace hooks.
- Replace strlcpy with strscpy in the tracing boot code.
* tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warnings when building htmldocs for function graph retval
riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
tracing/boot: Replace strlcpy with strscpy
tracing/timerlat: Add user-space interface
tracing/osnoise: Skip running osnoise if all instances are off
tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable
ftrace: Show all functions with addresses in available_filter_functions_addrs
selftests/ftrace: Add funcgraph-retval test case
LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex
function_graph: Support recording and printing the return value of function
fgraph: Add declaration of "struct fgraph_ret_regs"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
|
|
Select CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION for RISC-V, allowing
the user to enable dead code elimination. In order for this to work,
ensure that we keep the alternative table by annotating them with KEEP.
This boots well on qemu with both rv32_defconfig & rv64 defconfig, but
it only shrinks their builds by ~1%, a smaller config is thereforce
customized to test this feature:
| rv32 | rv64
--------|------------------------|---------------------
No DCE | 4460684 | 4893488
DCE | 3986716 | 4376400
Shrink | 473968 (~10.6%) | 517088 (~10.5%)
The config used above only reserves necessary options to boot on qemu
with serial console, more like the size-critical embedded scenes:
- rv64 config: https://pastebin.com/crz82T0s
- rv32 config: rv64 config + 32-bit.config
Here is Jisheng's original commit-msg:
When trying to run linux with various opensource riscv core on
resource limited FPGA platforms, for example, those FPGAs with less
than 16MB SDRAM, I want to save mem as much as possible. One of the
major technologies is kernel size optimizations, I found that riscv
does not currently support HAVE_LD_DEAD_CODE_DATA_ELIMINATION, which
passes -fdata-sections, -ffunction-sections to CFLAGS and passes the
--gc-sections flag to the linker.
This not only benefits my case on FPGA but also benefits defconfigs.
Here are some notable improvements from enabling this with defconfigs:
nommu_k210_defconfig:
text data bss dec hex
1112009 410288 59837 1582134 182436 before
962838 376656 51285 1390779 1538bb after
rv32_defconfig:
text data bss dec hex
8804455 2816544 290577 11911576 b5c198 before
8692295 2779872 288977 11761144 b375f8 after
defconfig:
text data bss dec hex
9438267 3391332 485333 13314932 cb2b74 before
9285914 3350052 483349 13119315 c82f53 after
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Link: https://lore.kernel.org/r/20230523165502.2592-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ALTERNATIVE mechanism can't work on XIP, and this is also reflected by
below Kconfig dependency:
RISCV_ALTERNATIVE
...
depends on !XIP_KERNEL
...
So there's no .alternative section at all for XIP case, remove it.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Link: https://lore.kernel.org/r/20230523165502.2592-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
During hibernation or restoration, freeze_secondary_cpus
checks num_online_cpus via BUG_ON, and the subsequent
save_processor_state also does the checking with WARN_ON.
In the case of CONFIG_PM_SLEEP_SMP=n, freeze_secondary_cpus
is not defined, but the sole possible condition to disable
CONFIG_PM_SLEEP_SMP is !SMP where num_online_cpus is always 1.
We also don't have to check it in save_processor_state.
So remove the unnecessary checking in save_processor_state.
Fixes: c0317210012e ("RISC-V: Add arch functions to support hibernation/suspend-to-disk")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230609075049.2651723-4-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
This patch series adds independent irq/softirq stacks to decrease the
press of the thread stack. Also, add a thread STACK_SIZE config for
users to adjust the proper size during compile time.
* b4-shazam-merge:
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
Link: https://lore.kernel.org/r/20230614013018.2168426-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Here are some bits that were discussed with Drew on the "should we
allow caps" threads that I have now created patches for:
- splitting of riscv_of_processor_hartid() into two distinct functions,
one for use purely during early boot, prior to the establishment of
the possible-cpus mask & another to fit the other current use-cases
- that then allows us to then completely skip some validation of the
hartid in the parser
- the biggest diff in the series is a rework of the comments in the
parser, as I have mostly found the existing (sparse) ones to not be
all that helpful whenever I have to go back and look at it
- from writing the comments, I found a conditional doing a bit of a
dance that I found counter-intuitive, so I've had a go at making that
match what I would expect a little better
- `i` implies 4 other extensions, so add them as extensions and set
them for the craic. Sure why not like...
* b4-shazam-merge:
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
Link: https://lore.kernel.org/r/20230607-audacity-overhaul-82bb867a825f@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the HAVE_SOFTIRQ_ON_OWN_STACK feature for the IRQ_STACKS config, and
the irq and softirq use the same irq_stack of percpu.
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230614013018.2168426-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add independent irq stacks for percpu to prevent kernel stack overflows.
It is also compatible with VMAP_STACK by arch_alloc_vmap_stack.
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20230614013018.2168426-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The previous patch ("function_graph: Support recording and printing
the return value of function") has laid the groundwork for the for
the funcgraph-retval, and this modification makes it available on
the RISC-V platform.
We introduce a new structure called fgraph_ret_regs for the RISC-V
platform to hold return registers and the frame pointer. We then
fill its content in the return_to_handler and pass its address to
the function ftrace_return_to_handler to record the return value.
Link: https://lore.kernel.org/linux-trace-kernel/a8d71b12259f90e7e63d0ea654fcac95b0232bbc.1680954589.git.pengdonglin@sangfor.com.cn
Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Of these four extensions, two were part of the base ISA when the port was
written and are required by the kernel. The other two are implied when
`i` is in riscv,isa on DT systems.
There's not much that userspace can do with this extra information, but
there is no harm in reporting an ISA string that closer resembles the
current versions of the specifications either.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607-nest-collision-5796b6be8be6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
While expanding on the comments in the ISA string parsing code, I
noticed that the conditional decrement of `isa` at the end of the loop
was a bit odd.
The parsing code expects that at the start of the for loop, `isa` will
point to the first character of the next unparsed extension.
However, depending on what the next extension is, this may not be true.
Unless the next extension is a multi-letter extension preceded by an
underscore, `isa` will either point to the string's null-terminator or
to the first character of the next extension, once the switch statement
has been evaluated.
Obviously incrementing `isa` at the end of the loop could cause it to
increment past the null terminator or miss a single letter extension, so
`isa` is conditionally decremented, just so that the loop can increment
it again.
It's easier to understand the code if, instead of this decrement +
increment dance, we instead use a while loop & rely on the handling of
individual extension types to leave `isa` pointing to the first
character of the next extension.
As already mentioned, this won't be the case where the following
extension is multi-letter & preceded by an underscore. To handle that,
invert the check and increment rather than decrement.
Hopefully this eliminates a "huh?!?" moment the next time somebody tries
to understand this code.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-estate-left-f20faabefb89@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
I have found these comments to not be at all helpful whenever I look at
the parser. Further, the comments in the default case (single letter
parser) are not quite right either.
Group the comments into a larger one at the start of each case, that
attempts to explain things at a higher level.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607-headpiece-tannery-83ed5cc4856a@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since riscv_fill_hwcap() now only iterates over possible cpus, the
basic validation of whether riscv,isa contains "rv<width>" can be moved
to riscv_early_of_processor_hartid().
Further, "ima" support is required by the kernel, so reject any CPU not
fitting the bill.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-guts-blurry-67e711acf328@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some back and forth with Drew [1] about riscv_fill_hwcap() resulted in
the realisation that it is not very useful to parse the DT & perform
validation of riscv,isa every time we would like to get the id for a
hart.
Although it is no longer called in riscv_fill_hwcap(),
riscv_of_processor_hartid() is called in several other places.
Notably in setup_smp() it forms part of the logic for filling the mask
of possible CPUs. Since a possible CPU must have passed this basic
validation of riscv,isa, a repeat validation is not required.
Rename riscv_of_processor_id() to riscv_early_of_processor_id(),
which will be called from setup_smp() & introduce a new
riscv_of_processor_id() which makes use of the pre-populated mask of
possible cpus.
Link: https://lore.kernel.org/linux-riscv/xvdswl3iyikwvamny7ikrxo2ncuixshtg3f6uucjahpe3xpc5c@ud4cz4fkg5dj/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-glade-pastel-d8cbd9d9f3c6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Saving off the `isa` pointer to a temp variable, followed by checking if
it has been incremented is a bit of an odd pattern. Perhaps it was done
to avoid a funky looking if statement mixed with the ifdeffery.
Now that we use IS_ENABLED() here just return from the parser as soon as
we detect a mismatch between the string and the currently running
kernel.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-splatter-bacterium-a75bb9f0d0b7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
scall is a deprecated alias for ecall. ecall is used in several places,
so there is no assembler compatibility concern.
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20230423223210.126948-1-maskray@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
thread.bad_cause is saved in arch_uprobe_pre_xol(), it should be restored
in arch_uprobe_{post,abort}_xol() accordingly, otherwise the save operation
is meaningless, this change is similar with x86 and powerpc.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Link: https://lore.kernel.org/r/1682214146-3756-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Evan Green <evan@rivosinc.com> says:
This change detects the presence of Zba, Zbb, and Zbs extensions and exports
them per-hart to userspace via the hwprobe mechanism. Glibc can then use
these in setting up hwcaps-based library search paths.
There's a little bit of extra housekeeping here: the first change adds
Zba and Zbs to the set of extensions the kernel recognizes, and the second
change starts tracking ISA features per-hart (in addition to the ANDed
mask of features across all harts which the kernel uses to make
decisions). Now that we track the ISA information per-hart, we could
even fix up /proc/cpuinfo to accurately report extension per-hart,
though I've left that out of this series for now.
* b4-shazam-merge:
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
RISC-V: Add Zba, Zbs extension probing
Link: https://lore.kernel.org/r/20230509182504.2997252-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add two new bits to the IMA_EXT_0 key for ZBA, ZBB, and ZBS extensions.
These are accurately reported per CPU.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230509182504.2997252-4-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The kernel maintains a mask of ISA extensions ANDed together across all
harts. Let's also keep a bitmap of ISA extensions for each CPU. Although
the kernel is currently unlikely to enable a feature that exists only on
some CPUs, we want the ability to report asymmetric CPU extensions
accurately to usermode.
Note that riscv_fill_hwcaps() runs before the per_cpu_offsets are built,
which is why I've used a [NR_CPUS] array rather than per_cpu() data.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230509182504.2997252-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the Zba address bit manipulation extension and Zbs single bit
instructions extension into those the kernel is aware of and maintains
in its riscv_isa bitmap.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230509182504.2997252-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The arch specific __acpi_map_table can be wrapper around either
early_memremap or early_ioremap. But early_memremap
routine works with normal pointers whereas __acpi_map_table expects
pointers in iomem address space. This causes kernel test bot to fail
while using the sparse tool. Fix the issue by using early_ioremap and
similar fix done for __acpi_unmap_table.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305201427.I7QhPjNW-lkp@intel.com/
Fixes: a91a9ffbd3a5 ("RISC-V: Add support to build the ACPI core")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607112417.782085-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The suspend_restore_csrs is called in both __hibernate_cpu_resume
and the `else` of subsequent swsusp_arch_suspend.
Removing the first call makes both suspend_{save,restore}_csrs
left in swsusp_arch_suspend for clean code.
Fixes: c0317210012e ("RISC-V: Add arch functions to support hibernation/suspend-to-disk")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: JeeHeng Sia <jeeheng.sia@starfivetech.com>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230522025020.285042-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
No need to link the x1/ra reg via jalr before suspend_restore_regs
So it's better to replace jalr with jr.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: JeeHeng Sia <jeeheng.sia@starfivetech.com >
Link: https://lore.kernel.org/r/20230519060854.214138-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If Zicbom is present but there was no riscv,cbom-blocks-size property found
during the cpu feeatures probe, or the cbom-block-size is not valid, then
the extension will be disabled. Make the print explicitly say this is
disabled to ensure that there is no confusion about what is being done.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230317134512.254627-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andy Chiu <andy.chiu@sifive.com> says:
This is the v21 patch series for adding Vector extension support in
Linux. Please refer to [1] for the introduction of the patchset. The
v21 patch series was aimed to solve build issues from v19, provide usage
guideline for the prctl interface, and address review comments on v20.
Thank every one who has been reviewing, suggesting on the topic. Hope
this get a step closer to the final merge.
* b4-shazam-merge: (27 commits)
selftests: add .gitignore file for RISC-V hwprobe
selftests: Test RISC-V Vector prctl interface
riscv: Add documentation for Vector
riscv: Enable Vector code to be built
riscv: detect assembler support for .option arch
riscv: Add sysctl to set the default vector rule for new processes
riscv: Add prctl controls for userspace vector management
riscv: hwcap: change ELF_HWCAP to a function
riscv: KVM: Add vector lazy save/restore support
riscv: kvm: Add V extension to KVM ISA
riscv: prevent stack corruption by reserving task_pt_regs(p) early
riscv: signal: validate altstack to reflect Vector
riscv: signal: Report signal frame size to userspace via auxv
riscv: signal: Add sigcontext save/restore for vector
riscv: signal: check fp-reserved words unconditionally
riscv: Add ptrace vector support
riscv: Allocate user's vector context in the first-use trap
riscv: Add task switch support for vector
riscv: Introduce struct/helpers to save/restore per-task Vector state
riscv: Introduce riscv_v_vsize to record size of Vector context
...
Link: https://lore.kernel.org/r/20230605110724.21391-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
To support Vector extension, the series exports variable-length vector
registers on the signal frame. However, this potentially breaks abi if
processing vector registers is required in the signal handler for old
binaries. For example, there is such need if user-level context switch
is triggerred via signals[1].
For this reason, it is best to leave a decision to distro maintainers,
where the enablement of userspace Vector for new launching programs can
be controlled. Developers may also need the switch to experiment with.
The parameter is configurable through sysctl interface so a distro may
turn off Vector early at init script if the break really happens in the
wild.
The switch will only take effects on new execve() calls once set. This
will not effect existing processes that do not call execve(), nor
processes which has been set with a non-default vstate_ctrl by making
explicit PR_RISCV_V_SET_CONTROL prctl() calls.
Link: https://lore.kernel.org/all/87cz4048rp.fsf@all.your.base.are.belong.to.us/
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-23-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This patch add two riscv-specific prctls, to allow usespace control the
use of vector unit:
* PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next,
or all following execve for a thread. Turning off a thread's Vector
live is not possible since libraries may have registered ifunc that
may execute Vector instructions.
* PR_RISCV_V_GET_CONTROL: get the same permission setting for the
current thread, and the setting for following execve(s).
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Using a function is flexible to represent ELF_HWCAP. So the kernel may
encode hwcap reflecting supported hardware features just at the moment of
the start of each program.
This will be helpful when we introduce prctl/sysctl interface to control
per-process availability of Vector extension in following patches.
Programs started with V disabled should see V masked off in theirs
ELF_HWCAP.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-21-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
