Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
|
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetree fixes for v6.8-final
Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.
Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The riscv BPF JIT doesn't emit proper kCFI prologues for BPF programs
and struct_ops trampolines when CONFIG_CFI_CLANG is enabled.
This causes CFI failures when calling BPF programs and can even crash
the kernel due to invalid memory accesses.
Example crash:
root@rv-selftester:~/bpf# ./test_progs -a dummy_st_ops
Unable to handle kernel paging request at virtual address ffffffff78204ffc
Oops [#1]
Modules linked in: bpf_testmod(OE) [....]
CPU: 3 PID: 356 Comm: test_progs Tainted: P OE 6.8.0-rc1 #1
Hardware name: riscv-virtio,qemu (DT)
epc : bpf_struct_ops_test_run+0x28c/0x5fc
ra : bpf_struct_ops_test_run+0x26c/0x5fc
epc : ffffffff82958010 ra : ffffffff82957ff0 sp : ff200000007abc80
gp : ffffffff868d6218 tp : ff6000008d87b840 t0 : 000000000000000f
t1 : 0000000000000000 t2 : 000000002005793e s0 : ff200000007abcf0
s1 : ff6000008a90fee0 a0 : 0000000000000000 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
a5 : ffffffff868dba26 a6 : 0000000000000001 a7 : 0000000052464e43
s2 : 00007ffffc0a95f0 s3 : ff6000008a90fe80 s4 : ff60000084c24c00
s5 : ffffffff78205000 s6 : ff60000088750648 s7 : ff20000000035008
s8 : fffffffffffffff4 s9 : ffffffff86200610 s10: 0000000000000000
s11: 0000000000000000 t3 : ffffffff8483dc30 t4 : ffffffff8483dc10
t5 : ffffffff8483dbf0 t6 : ffffffff8483dbd0
status: 0000000200000120 badaddr: ffffffff78204ffc cause: 000000000000000d
[<ffffffff82958010>] bpf_struct_ops_test_run+0x28c/0x5fc
[<ffffffff805083ee>] bpf_prog_test_run+0x170/0x548
[<ffffffff805029c8>] __sys_bpf+0x2d2/0x378
[<ffffffff804ff570>] __riscv_sys_bpf+0x5c/0x120
[<ffffffff8000e8fe>] syscall_handler+0x62/0xe4
[<ffffffff83362df6>] do_trap_ecall_u+0xc6/0x27c
[<ffffffff833822c4>] ret_from_exception+0x0/0x64
Code: b603 0109 b683 0189 b703 0209 8493 0609 157d 8d65 (a303) ffca
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Implement proper kCFI prologues for the BPF programs and callbacks and
drop __nocfi for riscv64. Fix the trampoline generation code to emit kCFI
prologue when a struct_ops trampoline is being prepared.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240303170207.82201-2-puranjay12@gmail.com
|
|
Even if pXd_leaf() API is defined globally, it's not clear on the retval,
and there are three types used (bool, int, unsigned log).
Always return a boolean for pXd_leaf() APIs.
Link: https://lkml.kernel.org/r/20240305043750.93762-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SEED CSR access from VS/VU mode (guest) will always trap to
HS-mode (KVM) when Zkr extension is available to the Guest/VM.
Forward this CSR access to KVM user space so that it can be
emulated based on the method chosen by VMM.
Fixes: f370b4e668f0 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The BUILTIN_DTB_SOURCE was only configured for K210 before. Since
SOC_BUILTIN_DTB_DECLARE was removed at commit d5805af9fe9f ("riscv: Fix
builtin DTB handling") from patch [1], the kernel cannot choose one of the
dtbs from then on and always take the first one dtb to use. Then, another
commit 0ddd7eaffa64 ("riscv: Fix BUILTIN_DTB for sifive and microchip soc")
from patch [2] supports BUILTIN_DTB_SOURCE for other SoCs. However, this
feature will only work if the Kconfig we use links the dtb we expected in
the first place as mentioned in the thread [3]. Thus, a config
BUILTIN_DTB_SOURCE is needed for all SoCs to choose one dtb to use.
For some considerations, this patch also removes default y if XIP_KERNEL
for BUILTIN_DTB, as this requires setting a proper dtb to use on the
BUILTIN_DTB_SOURCE, else the kernel with XIP but does not set
BUILTIN_DTB_SOURCE or unselect BUILTIN_DTB will not boot.
Also, this patch removes the default dtb string for k210 from Kconfig to
nommu_k210_defconfig and nommu_k210_sdcard_defconfig to avoid complex
Kconfig settings for other SoCs in the future.
[1] https://lore.kernel.org/linux-riscv/20201208073355.40828-5-damien.lemoal@wdc.com/
[2] https://lore.kernel.org/linux-riscv/20210604120639.1447869-1-alex@ghiti.fr/
[3] https://lore.kernel.org/linux-riscv/CAK7LNATt_56mO2Le4v4EnPnAfd3gC8S_Sm5-GCsfa=qXy=8Lrg@mail.gmail.com/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
JH7100 clock controller driver depends on certain root clock names.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWw0dteXO2jw4cwGvzKcL6vmnb96C=qgPgUqNDMtF6X0Q@mail.gmail.com/
Fixes: f03606470886 ("riscv: dts: starfive: replace underscores in node names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
There is no point in having seven architectures implementing the same empty
stub.
Provide a weak function in the init code and remove the stubs.
This also allows to utilize the function on UP which is required to
sanitize the per CPU handling on X86 UP.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de
|
|
soc/dt
RISC-V Devicetrees for v6.9
Sophgo:
Added reset support for SG2042.
Also updated maintainer information for SOPHGO vendor support.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.9' of https://github.com/sophgo/linux:
MAINTAINERS: Setup proper info for SOPHGO vendor support
riscv: dts: add resets property for uart node
riscv: dts: add reset generator for Sophgo SG2042 SoC
Link: https://lore.kernel.org/r/MA0P287MB2822315119DA51FF95EE3071FE5D2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
|
|
Offset vmemmap so that the first page of vmemmap will be mapped
to the first page of physical memory in order to ensure that
vmemmap’s bounds will be respected during
pfn_to_page()/page_to_pfn() operations.
The conversion macros will produce correct SV39/48/57 addresses
for every possible/valid DRAM_BASE inside the physical memory limits.
v2:Address Alex's comments
Suggested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Reported-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Closes: https://lore.kernel.org/linux-riscv/20240202135030.42265-1-csd4492@csd.uoc.gr
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240229191723.32779-1-dvlachos@ics.forth.gr
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This contains 2 fixes for NAPOT: patch 1 disables the use of NAPOT
mapping for vmalloc/vmap and patch 2 implements pte_leaf_size() to
report NAPOT size.
* b4-shazam-merge:
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
Link: https://lore.kernel.org/r/20240227205016.121901-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
pte_leaf_size() must be reimplemented to add support for NAPOT mappings.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This reverts commit ce173474cf19fe7fbe8f0fc74e3c81ec9c3d9807.
We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if
some part of a NAPOT mapping is unmapped, the remaining mapping is not
updated accordingly. For example:
ptr = vmalloc_huge(64 * 1024, GFP_KERNEL);
vunmap_range((unsigned long)(ptr + PAGE_SIZE),
(unsigned long)(ptr + 64 * 1024));
leads to the following kernel page table dump:
0xffff8f8000ef0000-0xffff8f8000ef1000 0x00000001033c0000 4K PTE N .. .. D A G . . W R V
Meaning the first entry which was not unmapped still has the N bit set,
which, if accessed first and cached in the TLB, could allow access to the
unmapped range.
That's because the logic to break the NAPOT mapping does not exist and
likely won't. Indeed, to break a NAPOT mapping, we first have to clear
the whole mapping, flush the TLB and then set the new mapping ("break-
before-make" equivalent). That works fine in userspace since we can handle
any pagefault occurring on the remaining mapping but we can't handle a kernel
pagefault on such mapping.
So fix this by reverting the commit that introduced the vmap/vmalloc
support.
Fixes: ce173474cf19 ("riscv: mm: support Svnapot in huge vmap")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes a couple of issues related to using the cbo.zero
instruction in userspace. The first patch fixes a bug where the wrong
enable bit gets set if the kernel is running in M-mode. The remaining
patches fix a bug where the enable bit gets reset to its default value
after a nonretentive idle state. I have hardware which reproduces this:
Before this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
Illegal instruction
After applying this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
ok 2 cbo.zero
ok 3 cbo.zero check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
* b4-shazam-merge:
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
Link: https://lore.kernel.org/r/20240228065559.3434837-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The value of the [ms]envcfg CSR is lost when entering a nonretentive
idle state, so the CSR must be rewritten when resuming the CPU.
Cc: <stable@vger.kernel.org> # v6.7+
Fixes: 43c16d51a19b ("RISC-V: Enable cbo.zero in usermode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged
ISA (aka S[ms]1p12). However, bits in this CSR are defined by several
other extensions which may be implemented separately from any particular
version of the privileged ISA (for example, some unrelated errata may
prevent an implementation from claiming conformance with Ss1p12). As a
result, Linux cannot simply use the privileged ISA version to determine
if the CSR is present. It must also check if any of these other
extensions are implemented. It also cannot probe the existence of the
CSR at runtime, because Linux does not require Sstrict, so (in the
absence of additional information) it cannot know if a CSR at that
address is [ms]envcfg or part of some non-conforming vendor extension.
Since there are several standard extensions that imply the existence of
the [ms]envcfg CSR, it becomes unwieldy to check for all of them
wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA
extension bit that is implied by the other extensions and denotes that
the CSR exists as defined in the privileged ISA, containing at least one
of the fields common between menvcfg and senvcfg.
This extension does not need to be parsed from the devicetree or ISA
string because it can only be implemented as a subset of some other
standard extension.
Cc: <stable@vger.kernel.org> # v6.7+
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When the kernel is running in M-mode, the CBZE bit must be set in the
menvcfg CSR, not in senvcfg.
Cc: <stable@vger.kernel.org>
Fixes: 43c16d51a19b ("RISC-V: Enable cbo.zero in usermode")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on risc-v with some adjustments.
Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery, and
use IS_ENABLED(CONFIG_CRASH_RESERVE) check to decide if compiling
in the crashkernel reservation code.
Link: https://lkml.kernel.org/r/20240124051254.67105-13-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Split crash out from kexec and clean up related config
items", v3.
Motivation:
=============
Previously, LKP reported a building error. When investigating, it can't
be resolved reasonablly with the present messy kdump config items.
https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
The kdump (crash dumping) related config items could causes confusions:
Firstly,
CRASH_CORE enables codes including
- crashkernel reservation;
- elfcorehdr updating;
- vmcoreinfo exporting;
- crash hotplug handling;
Now fadump of powerpc, kcore dynamic debugging and kdump all selects
CRASH_CORE, while fadump
- fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
global variable 'elfcorehdr_addr';
- kcore only needs vmcoreinfo exporting;
- kdump needs all of the current kernel/crash_core.c.
So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
mislead people that we enable crash dumping, actual it's not.
Secondly,
It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
Because KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are
shared by both kexec reboot and kdump. We could want kexec reboot,
but disable kdump. In that case, CRASH_CORE should not be selected.
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
Thirdly,
It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
code built in doesn't make any sense because no kernel loading or
switching will happen to utilize the KEXEC_CORE code.
---------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
---------------------
In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
while CRASH_DUMP can still be enabled when !MMU, then compiling error is
seen as the lkp test robot reported in above link.
------arch/sh/Kconfig------
config ARCH_SUPPORTS_KEXEC
def_bool MMU
config ARCH_SUPPORTS_CRASH_DUMP
def_bool BROKEN_ON_SMP
---------------------------
Changes:
===========
1, split out crash_reserve.c from crash_core.c;
2, split out vmcore_infoc. from crash_core.c;
3, move crash related codes in kexec_core.c into crash_core.c;
4, remove dependency of FA_DUMP on CRASH_DUMP;
5, clean up kdump related config items;
6, wrap up crash codes in crash related ifdefs on all 8 arch-es
which support crash dumping, except of ppc;
Achievement:
===========
With above changes, I can rearrange the config item logic as below (the right
item depends on or is selected by the left item):
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE (for kexec reboot only)
KEXEC_FILE --|
Test
========
On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
riscv, loongarch, I did below three cases of config item setting and
building all passed. Take configs on x86_64 as exampmle here:
(1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
items are unset automatically:
# Kexec and crash features
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# end of Kexec and crash features
(2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
---------------
# Kexec and crash features
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
---------------
(3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
------------------------
# Kexec and crash features
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
# end of Kexec and crash features
------------------------
Note:
For ppc, it needs investigation to make clear how to split out crash
code in arch folder. Hope Hari and Pingfan can help have a look, see if
it's doable. Now, I make it either have both kexec and crash enabled, or
disable both of them altogether.
This patch (of 14):
Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the
relevant codes into separate files: crash_reserve.c,
include/linux/crash_reserve.h.
And also add config item CRASH_RESERVE to control its enabling of the
codes. And update config items which has relationship with crashkernel
reservation.
And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE
when those scopes are only crashkernel reservation related.
And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on
arm64, x86 and risc-v because those architectures' crash_core.h is only
related to crashkernel reservation.
[akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin]
Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Earlier, vmap_area_list is exported to vmcoreinfo so that makedumpfile get
the base address of vmalloc area. Now, vmap_area_list is empty, so export
VMALLOC_START to vmcoreinfo instead, and remove vmap_area_list.
[urezki@gmail.com: fix a warning in the crash_save_vmcoreinfo_init()]
Link: https://lkml.kernel.org/r/20240111192329.449189-1-urezki@gmail.com
Link: https://lkml.kernel.org/r/20240102184633.748113-6-urezki@gmail.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kazuhito Hagio <k-hagio-ab@nec.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm and RISC-V SoC fixes from Arnd Bergmann:
"The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with a
few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors"
* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
arm64: dts: qcom: Fix interrupt-map cell sizes
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: freescale: Disable interrupt_map check
ARM: ep93xx: Add terminator to gpiod_lookup_table
riscv: dts: sifive: add missing #interrupt-cells to pmic
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
riscv: dts: starfive: replace underscores in node names
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
...
|
|
Before attempting to support the pre-ratification version of vector
found on older T-Head CPUs, disallow "v" in riscv,isa on these
platforms. The deprecated property has no clear way to communicate
the specific version of vector that is supported and much of the vendor
provided software puts "v" in the isa string. riscv,isa-extensions
should be used instead. This should not be too much of a burden for
these systems, as the vendor shipped devicetrees and firmware do not
work with a mainline kernel and will require updating.
We can limit this restriction to only ignore v in riscv,isa on CPUs
that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs
that support the ratified version of vector should report non-zero
marchid, according to Guo Ren [1].
Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1]
Fixes: dc6667a4e7e3 ("riscv: Extending cpufeature.c to detect V-extension")
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240223-tidings-shabby-607f086cb4d7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add resets property for uart0 for completeness, although it is
deasserted by default.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://lore.kernel.org/r/807f75e433a0f900da40ebb6a448349c98580072.1706577450.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
Add reset generator node to device tree for SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://lore.kernel.org/r/b2f5d7cd2d3fccfc00cf4563d2dd7363b0fa2fca.1706577450.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
CONFIG_CLANG_SUPPORTS_DYNAMIC_FTRACE
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, this condition is always true, as the build will
fail during the configuration stage for older LLVM versions. Remove it.
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-8-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, the condition for using _mcount as MCOUNT_NAME is
always true, as the build will fail during the configuration stage for
older LLVM versions. Replace MCOUNT_NAME with _mcount directly.
This effectively reverts commit 7ce047715030 ("riscv: Workaround mcount
name prior to clang-13").
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-7-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reviews.llvm.org was LLVM's Phabricator instances for code review. It has
been abandoned in favor of GitHub pull requests. While the majority of
links in the kernel sources still work because of the work Fangrui has
done turning the dynamic Phabricator instance into a static archive, there
are some issues with that work, so preemptively convert all the links in
the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in the
commit message itself so there should not be any loss of fidelity in the
relevant information.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-2-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new riscv specific arch_hugetlb_migration_supported() must be
guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid
the following build error:
In file included from include/linux/hugetlb.h:851,
from kernel/fork.c:52:
>> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration
15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported'
916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'}
14 | bool arch_hugetlb_migration_supported(struct hstate *h);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/
Fixes: ce68c035457b ("riscv: Fix arch_hugetlb_migration_supported() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240211083640.756583-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Previous commit dbfbda3bd6bf ("riscv: mm: update T-Head memory type
definitions") from patch [1] missed a `<` for bit shifting, result in
bit(61) does not set in _PAGE_NOCACHE_THEAD and leaves bit(0) set instead.
This patch get this fixed.
Link: https://lore.kernel.org/linux-riscv/20230912072510.2510-1-jszhang@kernel.org/ [1]
Fixes: dbfbda3bd6bf ("riscv: mm: update T-Head memory type definitions")
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/tencent_E19FA1A095768063102E654C6FC858A32F06@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|