summaryrefslogtreecommitdiff
path: root/arch/s390/mm
AgeCommit message (Collapse)AuthorFilesLines
2023-05-17procfs: consolidate arch_report_meminfo declarationArnd Bergmann1-0/+1
The arch_report_meminfo() function is provided by four architectures, with a __weak fallback in procfs itself. On architectures that don't have a custom version, the __weak version causes a warning because of the missing prototype. Remove the architecture specific prototypes and instead add one in linux/proc_fs.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for arch/x86 Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Message-Id: <20230516195834.551901-1-arnd@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+7
Pull more kvm updates from Paolo Bonzini: "This includes the 6.4 changes for RISC-V, and a few bugfix patches for other architectures. For x86, this closes a longstanding performance issue in the newer and (usually) more scalable page table management code. RISC-V: - ONE_REG interface to enable/disable SBI extensions - Zbb extension for Guest/VM - AIA CSR virtualization x86: - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU can result in the root being freed even though the root is completely valid and can be reused as-is (with a TLB flush). s390: - A couple of bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix race in gmap_make_secure() KVM: s390: pv: fix asynchronous teardown for small VMs KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated RISC-V: KVM: Virtualize per-HART AIA CSRs RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask RISC-V: KVM: Add ONE_REG interface for AIA CSRs RISC-V: KVM: Implement subtype for CSR ONE_REG interface RISC-V: KVM: Initial skeletal support for AIA RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines RISC-V: Detect AIA CSRs from ISA string RISC-V: Add AIA related CSR defines RISC-V: KVM: Allow Zbb extension for Guest/VM RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions RISC-V: KVM: Alphabetize selects KVM: RISC-V: Retry fault if vma_lookup() results become invalid
2023-05-05Merge tag 'kvm-s390-next-6.4-2' of ↵Paolo Bonzini1-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD For 6.4
2023-05-04Merge tag 'mm-stable-2023-05-03-16-22' of ↵Linus Torvalds1-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout()
2023-05-04KVM: s390: pv: fix asynchronous teardown for small VMsClaudio Imbrenda1-0/+7
On machines without the Destroy Secure Configuration Fast UVC, the topmost level of page tables is set aside and freed asynchronously as last step of the asynchronous teardown. Each gmap has a host_to_guest radix tree mapping host (userspace) addresses (with 1M granularity) to gmap segment table entries (pmds). If a guest is smaller than 2GB, the topmost level of page tables is the segment table (i.e. there are only 2 levels). Replacing it means that the pointers in the host_to_guest mapping would become stale and cause all kinds of nasty issues. This patch fixes the issue by disallowing asynchronous teardown for guests with only 2 levels of page tables. Userspace should (and already does) try using the normal destroy if the asynchronous one fails. Update s390_replace_asce so it refuses to replace segment type ASCEs. This is still needed in case the normal destroy VM fails. Fixes: fb491d5500a7 ("KVM: s390: pv: asynchronous destroy for reboot") Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230421085036.52511-2-imbrenda@linux.ibm.com>
2023-05-03mm/ksm: move disabling KSM from s390/gmap code to KSM codeDavid Hildenbrand1-19/+1
Let's factor out actual disabling of KSM. The existing "mm->def_flags &= ~VM_MERGEABLE;" was essentially a NOP and can be dropped, because def_flags should never include VM_MERGEABLE. Note that we don't currently prevent re-enabling KSM. This should now be faster in case KSM was never enabled, because we only conditionally iterate all VMAs. Further, it certainly looks cleaner. Link: https://lkml.kernel.org/r/20230422210156.33630-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Stefan Roesch <shr@devkernel.io> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-30Merge tag 's390-6.4-1' of ↵Linus Torvalds7-359/+111
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code * tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits) s390/stackleak: provide fast __stackleak_poison() implementation stackleak: allow to specify arch specific stackleak poison function s390: select ARCH_USE_SYM_ANNOTATIONS s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc() s390: wire up memfd_secret system call s390/mm: enable ARCH_HAS_SET_DIRECT_MAP s390/mm: use BIT macro to generate SET_MEMORY bit masks s390/relocate_kernel: adjust indentation s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc. s390/entry: use SYM* macros instead of ENTRY(), etc. s390/purgatory: use SYM* macros instead of ENTRY(), etc. s390/kprobes: use SYM* macros instead of ENTRY(), etc. s390/reipl: use SYM* macros instead of ENTRY(), etc. s390/head64: use SYM* macros instead of ENTRY(), etc. s390/earlypgm: use SYM* macros instead of ENTRY(), etc. s390/mcount: use SYM* macros instead of ENTRY(), etc. s390/crc32le: use SYM* macros instead of ENTRY(), etc. s390/crc32be: use SYM* macros instead of ENTRY(), etc. s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc. s390/amode31: use SYM* macros instead of ENTRY(), etc. ...
2023-04-22mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()Linus Torvalds2-2/+2
Instead of having callers care about the mmap_min_addr logic for the lowest valid mapping address (and some of them getting it wrong), just move the logic into vm_unmapped_area() itself. One less thing for various architecture cases (and generic helpers) to worry about. We should really try to make much more of this be common code, but baby steps.. Without this, vm_unmapped_area() could return an address below mmap_min_addr (because some caller forgot about that). That then causes the mmap machinery to think it has found a workable address, but then later security_mmap_addr(addr) is unhappy about it and the mmap() returns with a nonsensical error (EPERM). The proper action is to either return ENOMEM (if the virtual address space is exhausted), or try to find another address (ie do a bottom-up search for free addresses after the top-down one failed). See commit 2afc745f3e30 ("mm: ensure get_unmapped_area() returns higher address than mmap_min_addr"), which fixed this for one call site (the generic arch_get_unmapped_area_topdown() fallback) but left other cases alone. Link: https://lkml.kernel.org/r/20230418214009.1142926-1-Liam.Howlett@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-22mm: add new api to enable ksm per processStefan Roesch1-0/+7
Patch series "mm: process/cgroup ksm support", v9. So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. Use case 1: The madvise call is not available in the programming language. An example for this are programs with forked workloads using a garbage collected language without pointers. In such a language madvise cannot be made available. In addition the addresses of objects get moved around as they are garbage collected. KSM sharing needs to be enabled "from the outside" for these type of workloads. Use case 2: The same interpreter can also be used for workloads where KSM brings no benefit or even has overhead. We'd like to be able to enable KSM on a workload by workload basis. Use case 3: With the madvise call sharing opportunities are only enabled for the current process: it is a workload-local decision. A considerable number of sharing opportunities may exist across multiple workloads or jobs (if they are part of the same security domain). Only a higler level entity like a job scheduler or container can know for certain if its running one or more instances of a job. That job scheduler however doesn't have the necessary internal workload knowledge to make targeted madvise calls. Security concerns: In previous discussions security concerns have been brought up. The problem is that an individual workload does not have the knowledge about what else is running on a machine. Therefore it has to be very conservative in what memory areas can be shared or not. However, if the system is dedicated to running multiple jobs within the same security domain, its the job scheduler that has the knowledge that sharing can be safely enabled and is even desirable. Performance: Experiments with using UKSM have shown a capacity increase of around 20%. Here are the metrics from an instagram workload (taken from a machine with 64GB main memory): full_scans: 445 general_profit: 20158298048 max_page_sharing: 256 merge_across_nodes: 1 pages_shared: 129547 pages_sharing: 5119146 pages_to_scan: 4000 pages_unshared: 1760924 pages_volatile: 10761341 run: 1 sleep_millisecs: 20 stable_node_chains: 167 stable_node_chains_prune_millisecs: 2000 stable_node_dups: 2751 use_zero_pages: 0 zero_pages_sharing: 0 After the service is running for 30 minutes to an hour, 4 to 5 million shared pages are common for this workload when using KSM. Detailed changes: 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 3. Add general_profit metric The general_profit metric of KSM is specified in the documentation, but not calculated. This adds the general profit metric to /sys/kernel/debug/mm/ksm. 4. Add more metrics to ksm_stat This adds the process profit metric to /proc/<pid>/ksm_stat. 5. Add more tests to ksm_tests and ksm_functional_tests This adds an option to specify the merge type to the ksm_tests. This allows to test madvise and prctl KSM. It also adds a two new tests to ksm_functional_tests: one to test the new prctl options and the other one is a fork test to verify that the KSM process setting is inherited by client processes. This patch (of 3): So far KSM can only be enabled by calling madvise for memory regions. To be able to use KSM for more workloads, KSM needs to have the ability to be enabled / disabled at the process / cgroup level. 1. New options for prctl system command This patch series adds two new options to the prctl system call. The first one allows to enable KSM at the process level and the second one to query the setting. The setting will be inherited by child processes. With the above setting, KSM can be enabled for the seed process of a cgroup and all processes in the cgroup will inherit the setting. 2. Changes to KSM processing When KSM is enabled at the process level, the KSM code will iterate over all the VMA's and enable KSM for the eligible VMA's. When forking a process that has KSM enabled, the setting will be inherited by the new child process. 1) Introduce new MMF_VM_MERGE_ANY flag This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag is set, kernel samepage merging (ksm) gets enabled for all vma's of a process. 2) Setting VM_MERGEABLE on VMA creation When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the VM_MERGEABLE flag will be set for this VMA. 3) support disabling of ksm for a process This adds the ability to disable ksm for a process if ksm has been enabled for the process with prctl. 4) add new prctl option to get and set ksm for a process This adds two new options to the prctl system call - enable ksm for all vmas of a process (if the vmas support it). - query if ksm has been enabled for a process. 3. Disabling MMF_VM_MERGE_ANY for storage keys in s390 In the s390 architecture when storage keys are used, the MMF_VM_MERGE_ANY will be disabled. Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-20s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()Heiko Carstens1-5/+50
Make use of the set_direct_map() calls for module allocations. In particular: - All changes to read-only permissions in kernel VA mappings are also applied to the direct mapping. Note that execute permissions are intentionally not applied to the direct mapping in order to make sure that all allocated pages within the direct mapping stay non-executable - module_alloc() passes the VM_FLUSH_RESET_PERMS to __vmalloc_node_range() to make sure that all implicit permission changes made to the direct mapping are reset when the allocated vm area is freed again Side effects: the direct mapping will be fragmented depending on how many vm areas with VM_FLUSH_RESET_PERMS and/or explicit page permission changes are allocated and freed again. For example, just after boot of a system the direct mapping statistics look like: $cat /proc/meminfo ... DirectMap4k: 111628 kB DirectMap1M: 16665600 kB DirectMap2G: 0 kB Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-20s390/mm: enable ARCH_HAS_SET_DIRECT_MAPHeiko Carstens1-0/+35
Implement the set_direct_map_*() API, which allows to invalidate and set default permissions to pages within the direct mapping. Note that kernel_page_present(), which is also supposed to be part of this API, is intentionally not implemented. The reason for this is that kernel_page_present() is only used (and currently only makes sense) for suspend/resume, which isn't supported on s390. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-13s390/mm: fix direct map accountingHeiko Carstens1-1/+1
Commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") did not implement direct map accounting in the early page table setup code. In result the reported values are bogus now: $cat /proc/meminfo ... DirectMap4k: 5120 kB DirectMap1M: 18446744073709546496 kB DirectMap2G: 0 kB Fix this by adding the missing accounting. The result looks sane again: $cat /proc/meminfo ... DirectMap4k: 6156 kB DirectMap1M: 2091008 kB DirectMap2G: 6291456 kB Fixes: bb1520d581a3 ("s390/mm: start kernel with DAT enabled") Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-13s390/mm: use set_memory_*() helpers instead of open codingHeiko Carstens2-23/+16
Given that set_memory_rox() and set_memory_rwnx() exist, it is possible to get rid of all open coded __set_memory() usages and replace them with proper helper calls everywhere. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-04-06s390/mm: try VMA lock-based page fault handling firstHeiko Carstens1-0/+24
Attempt VMA lock-based page fault handling first, and fall back to the existing mmap_lock-based handling if that fails. This is the s390 variant of "x86/mm: try VMA lock-based page fault handling first". Link: https://lkml.kernel.org/r/20230314132808.1266335-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-20s390/mm: make use of atomic_fetch_xor()Heiko Carstens1-7/+1
Make use of atomic_fetch_xor() instead of an atomic_cmpxchg() loop to implement atomic_xor_bits() (aka atomic_xor_return()). This makes the C code more readable and in addition generates better code, since for z196 and newer a single lax instruction is generated instead of a cmpxchg() loop. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20Merge branch 'decompressor-memory-tracking' into featuresHeiko Carstens4-306/+11
Vasily Gorbik says: =================== Combine and generalize all methods for finding unused memory in decompressor, while decreasing complexity, add memory holes support, while improving error handling (especially in low-memory conditions) and debug-ability. =================== Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390/kasan: move shadow mapping to decompressorVasily Gorbik3-301/+11
Since regular paging structs are initialized in decompressor already move KASAN shadow mapping to decompressor as well. This helps to avoid allocating KASAN required memory in 1 large chunk, de-duplicate paging structs creation code and start the uncompressed kernel with KASAN instrumentation right away. This also allows to avoid all pitfalls accidentally calling KASAN instrumented code during KASAN initialization. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390/mm,pageattr: allow KASAN shadow memoryVasily Gorbik1-2/+0
Allow changing page table attributes for KASAN shadow memory ranges. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390/boot: rework decompressor reserved trackingVasily Gorbik1-21/+18
Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390/boot: rename mem_detect to physmem_infoVasily Gorbik1-3/+3
In preparation to extending mem_detect with additional information like reserved ranges rename it to more generic physmem_info. This new naming also help to avoid confusion by using more exact terms like "physmem online ranges", etc. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390: simplify one-level sysctl registration for page_table_sysctlLuis Chamberlain1-11/+1
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230310234525.3986352-6-mcgrof@kernel.org Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-20s390: simplify one level sysctl registration for cmm_tableLuis Chamberlain1-11/+1
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230310234525.3986352-5-mcgrof@kernel.org Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-03Merge tag 's390-6.3-2' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - Add empty command line parameter handling stubs to kernel for all command line parameters which are handled in the decompressor. This avoids invalid "Unknown kernel command line parameters" messages from the kernel, and also avoids that these will be incorrectly passed to user space. This caused already confusion, therefore add the empty stubs - Add missing phys_to_virt() handling to machine check handler - Introduce and use a union to be used for zcrypt inline assemblies. This makes sure that only a register wide member of the union is passed as input and output parameter to inline assemblies, while usual C code uses other members of the union to access bit fields of it - Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to atomically read a 128-bit value from memory. This replaces the (mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf code. Currently gcc does not generate the used lpq instruction if __READ_ONCE() is used for aligned 128-bit accesses, therefore use this s390 specific helper - Simplify machine check handler code if a task needs to be killed because of e.g. register corruption due to a machine malfunction - Perform CPU reset to clear pending interrupts and TLB entries on an already stopped target CPU before delegating work to it - Generate arch/s390/boot/vmlinux.map link map for the decompressor, when CONFIG_VMLINUX_MAP is enabled for debugging purposes - Fix segment type handling for dcssblk devices. It incorrectly always returned type "READ/WRITE" even for read-only segements, which can result in a kernel panic if somebody tries to write to a read-only device - Sort config S390 select list again - Fix two kprobe reenter bugs revealed by a recently added kprobe kunit test * tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kprobes: fix current_kprobe never cleared after kprobes reenter s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler s390/Kconfig: sort config S390 select list again s390/extmem: return correct segment type in __segment_load() s390/decompressor: add link map saving s390/smp: perform cpu reset before delegating work to target cpu s390/mcck: cleanup user process termination path s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg s390/rwonce: add READ_ONCE_ALIGNED_128() macro s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union s390/nmi: fix virtual-physical address confusion s390/setup: do not complain about parameters handled in decompressor
2023-03-01s390/extmem: return correct segment type in __segment_load()Gerald Schaefer1-5/+7
Commit f05f62d04271f ("s390/vmem: get rid of memory segment list") reshuffled the call to vmem_add_mapping() in __segment_load(), which now overwrites rc after it was set to contain the segment type code. As result, __segment_load() will now always return 0 on success, which corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable segment. This results in a kernel crash when loading a read-only segment as dcssblk block device, and trying to write to it. Instead of reshuffling code again, make sure to return the segment type on success, and also describe this rather delicate and unexpected logic in the function comment. Also initialize new segtype variable with invalid value, to prevent possible future confusion. Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list") Cc: <stable@vger.kernel.org> # 5.9+ Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-24Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-15s390/kfence: fix page fault reportingHeiko Carstens1-14/+35
Baoquan He reported lots of KFENCE reports when /proc/kcore is read, e.g. with crash or even simpler with dd: BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x5e/0x120 Invalid read at 0x00000000f4f5149f: copy_from_kernel_nofault+0x5e/0x120 read_kcore+0x6b2/0x870 proc_reg_read+0x9a/0xf0 vfs_read+0x94/0x270 ksys_read+0x70/0x100 __do_syscall+0x1d0/0x200 system_call+0x82/0xb0 The reason for this is that read_kcore() simply reads memory that might have been unmapped by KFENCE with copy_from_kernel_nofault(). Any fault due to pages being unmapped by KFENCE would be handled gracefully by the fault handler (exception table fixup). However the s390 fault handler first reports the fault, and only afterwards would perform the exception table fixup. Most architectures have this in reversed order, which also avoids the false positive KFENCE reports when an unmapped page is accessed. Therefore change the s390 fault handler so it handles exception table fixups before KFENCE page faults are reported. Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Acked-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/r/20230213183858.1473681-1-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mem_detect: do not truncate online memory ranges infoVasily Gorbik1-2/+2
Commit bf64f0517e5d ("s390/mem_detect: handle online memory limit just once") introduced truncation of mem_detect online ranges based on identity mapping size. For kdump case however the full set of online memory ranges has to be feed into memblock_physmem_add so that crashed system memory could be extracted. Instead of truncating introduce a "usable limit" which is respected by mem_detect api. Also add extra online memory ranges iterator which still provides full set of online memory ranges disregarding the "usable limit". Fixes: bf64f0517e5d ("s390/mem_detect: handle online memory limit just once") Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mm: add support for RDP (Reset DAT-Protection)Gerald Schaefer1-0/+25
RDP instruction allows to reset DAT-protection bit in a PTE, with less CPU synchronization overhead than IPTE instruction. In particular, IPTE can cause machine-wide synchronization overhead, and excessive IPTE usage can negatively impact machine performance. RDP can be used instead of IPTE, if the new PTE only differs in SW bits and _PAGE_PROTECT HW bit, for PTE protection changes from RO to RW. SW PTE bit changes are allowed, e.g. for dirty and young tracking, but none of the other HW-defined part of the PTE must change. This is because the architecture forbids such changes to an active and valid PTE, which is why invalidation with IPTE is always used first, before writing a new entry. The RDP optimization helps mainly for fault-driven SW dirty-bit tracking. Writable PTEs are initially always mapped with HW _PAGE_PROTECT bit set, to allow SW dirty-bit accounting on first write protection fault, where the DAT-protection would then be reset. The reset is now done with RDP instead of IPTE, if RDP instruction is available. RDP cannot always guarantee that the DAT-protection reset is propagated to all CPUs immediately. This means that spurious TLB protection faults on other CPUs can now occur. For this, common code provides a flush_tlb_fix_spurious_fault() handler, which will now be used to do a CPU-local TLB flush. However, this will clear the whole TLB of a CPU, and not just the affected entry. For more fine-grained flushing, by simply doing a (local) RDP again, flush_tlb_fix_spurious_fault() would need to also provide the PTE pointer. Note that spurious TLB protection faults cannot really be distinguished from racing pagetable updates, where another thread already installed the correct PTE. In such a case, the local TLB flush would be unnecessary overhead, but overall reduction of CPU synchronization overhead by not using IPTE is still expected to be beneficial. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-14s390/mm: define private VM_FAULT_* reasons from top bitsPeter Xu1-5/+9
The current definition already collapse with the generic definition of vm_fault_reason. Move the private definitions to allocate bits from the top of uint so they won't collapse anymore. Signed-off-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20230205231704.909536-4-peterx@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-10mm: replace vma->vm_flags indirect modification in ksm_madviseSuren Baghdasaryan1-1/+5
Replace indirect modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. Link: https://lkml.kernel.org/r/20230126193752.297968-6-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-10mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan1-2/+1
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09Merge branch 'cmpxchg_user_key' into featuresHeiko Carstens1-2/+7
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-06s390/kasan: avoid mapping KASAN shadow for standby memoryVasily Gorbik1-21/+5
KASAN common code is able to handle memory hotplug and create KASAN shadow memory on a fly. Online memory ranges are available from mem_detect, use this information to avoid mapping KASAN shadow for standby memory. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-06s390/mem_detect: handle online memory limit just onceVasily Gorbik1-2/+0
Introduce mem_detect_truncate() to cut any online memory ranges above established identity mapping size, so that mem_detect users wouldn't have to do it over and over again. Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-06s390/vmem: remove unnecessary KASAN checksVasily Gorbik1-12/+1
Kasan shadow memory area has been moved to the end of kernel address space since commit 9a39abb7c9aa ("s390/boot: simplify and fix kernel memory layout setup"), therefore skipping any memory ranges above VMALLOC_START in empty page tables cleanup code already handles KASAN shadow memory intersection case and explicit checks could be removed. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-06s390/vmem: fix empty page tables cleanup under KASANVasily Gorbik1-3/+3
Commit b9ff81003cf1 ("s390/vmem: cleanup empty page tables") introduced empty page tables cleanup in vmem code, but when the kernel is built with KASAN enabled the code has no effect due to wrong KASAN shadow memory intersection condition, which effectively ignores any memory range below KASAN shadow. Fix intersection condition to make code work as anticipated. Fixes: b9ff81003cf1 ("s390/vmem: cleanup empty page tables") Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-06s390/kasan: update kasan memory layout noteVasily Gorbik1-30/+26
Kasan shadow memory area has been moved to the end of kernel address space since commit 9a39abb7c9aa ("s390/boot: simplify and fix kernel memory layout setup"). Change kasan memory layout note accordingly. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-31s390/mm,ptdump: avoid Kasan vs Memcpy Real markers swappingVasily Gorbik1-8/+8
---[ Real Memory Copy Area Start ]--- 0x001bfffffffff000-0x001c000000000000 4K PTE I ---[ Kasan Shadow Start ]--- ---[ Real Memory Copy Area End ]--- 0x001c000000000000-0x001c000200000000 8G PMD RW NX ... ---[ Kasan Shadow End ]--- ptdump does a stable sort of markers. Move kasan markers after memcpy real to avoid swapping. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-22s390/vmem: use swap() instead of open coding itJiapeng Chong1-7/+1
Swap is a function interface that provides exchange function. To avoid code duplication, we can use swap function. ./arch/s390/mm/vmem.c:680:10-11: WARNING opportunity for swap(). [hca@linux.ibm.com: get rid of all temp variables] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3786 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230117060223.58583-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-19mm: remove zap_page_range and create zap_vma_pagesMike Kravetz1-1/+1
zap_page_range was originally designed to unmap pages within an address range that could span multiple vmas. While working on [1], it was discovered that all callers of zap_page_range pass a range entirely within a single vma. In addition, the mmu notification call within zap_page range does not correctly handle ranges that span multiple vmas. When crossing a vma boundary, a new mmu_notifier_range_init/end call pair with the new vma should be made. Instead of fixing zap_page_range, do the following: - Create a new routine zap_vma_pages() that will remove all pages within the passed vma. Most users of zap_page_range pass the entire vma and can use this new routine. - For callers of zap_page_range not passing the entire vma, instead call zap_page_range_single(). - Remove zap_page_range. [1] https://lore.kernel.org/linux-mm/20221114235507.294320-2-mike.kravetz@oracle.com/ Link: https://lkml.kernel.org/r/20230104002732.232573-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Suggested-by: Peter Xu <peterx@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390] Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-13s390/mm: allocate Absolute Lowcore Area in decompressorAlexander Gordeev1-3/+2
Move Absolute Lowcore Area allocation to the decompressor. As result, get_abs_lowcore() and put_abs_lowcore() access brackets become really straight and do not require complex execution context analysis and LAP and interrupts tackling. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/mm: allocate Real Memory Copy Area in decompressorAlexander Gordeev1-8/+1
Move Real Memory Copy Area allocation to the decompressor. As result, memcpy_real() and memcpy_real_iter() movers become usable since the very moment the kernel starts. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/kasan: remove identity mapping supportAlexander Gordeev1-22/+5
The identity mapping is created in the decompressor, there is no need to have the same functionality in the kasan setup code. Thus, remove it. Remove the 4KB pages check for first 1MB since there is no need to take care of the lowcore pages. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/maccess: remove dead DAT-off codeAlexander Gordeev1-9/+5
As the kernel is executed in DAT-on mode only, remove unnecessary DAT bit check together with the dead code. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/mm: start kernel with DAT enabledAlexander Gordeev3-120/+96
The setup of the kernel virtual address space is spread throughout the sources, boot stages and config options like this: 1. The available physical memory regions are queried and stored as mem_detect information for later use in the decompressor. 2. Based on the physical memory availability the virtual memory layout is established in the decompressor; 3. If CONFIG_KASAN is disabled the kernel paging setup code populates kernel pgtables and turns DAT mode on. It uses the information stored at step [1]. 4. If CONFIG_KASAN is enabled the kernel early boot kasan setup populates kernel pgtables and turns DAT mode on. It uses the information stored at step [1]. The kasan setup creates early_pg_dir directory and directly overwrites swapper_pg_dir entries to make shadow memory pages available. Move the kernel virtual memory setup to the decompressor and start the kernel with DAT turned on right from the very first istruction. That completely eliminates the boot phase when the kernel runs in DAT-off mode, simplies the overall design and consolidates pgtables setup. The identity mapping is created in the decompressor, while kasan shadow mappings are still created by the early boot kernel code. Share with decompressor the existing kasan memory allocator. It decreases the size of a newly requested memory block from pgalloc_pos and ensures that kernel image is not overwritten. pgalloc_low and pgalloc_pos pointers are made preserved boot variables for that. Use the bootdata infrastructure to setup swapper_pg_dir and invalid_pg_dir directories used by the kernel later. The interim early_pg_dir directory established by the kasan initialization code gets eliminated as result. As the kernel runs in DAT-on mode only the PSW_KERNEL_BITS define gets PSW_MASK_DAT bit by default. Additionally, the setup_lowcore_dat_off() and setup_lowcore_dat_on() routines get merged, since there is no DAT-off mode stage anymore. The memory mappings are created with RW+X protection that allows the early boot code setting up all necessary data and services for the kernel being booted. Just before the paging is enabled the memory protection is changed to RO+X for text, RO+NX for read-only data and RW+NX for kernel data and the identity mapping. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/kasan: use set_pXe_bit() for pgtable entries setupAlexander Gordeev1-11/+26
Convert setup of pgtable entries to use set_pXe_bit() helpers as the preferred way in MM code. Locally introduce pgprot_clear_bit() helper, which is strictly speaking a generic function. However, it is only x86 pgprot_clear_protnone_bits() helper, which does a similar thing, so do not make it public. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/kasan: cleanup setup of untracked memory pgtablesAlexander Gordeev1-4/+3
Avoid duplicate IS_ENABLED(CONFIG_KASAN_VMALLOC) condition check. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/kasan: cleanup setup of zero pgtableAlexander Gordeev1-7/+5
Fix variables initialization coding style and setup zero pgtable same way region and segment pgtables are set up. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-13s390/kasan: sort out physical vs virtual memory confusionAlexander Gordeev1-2/+2
The kasan early boot memory allocators operate on pgalloc_pos and segment_pos physical address pointers, but fail to convert it to the corresponding virtual pointers. Currently it is not a problem, since virtual and physical addresses on s390 are the same. Nevertheless, should they ever differ, this would cause an invalid pointer access. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-12-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-77/+82
Pull kvm updates from Paolo Bonzini: "ARM64: - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d: "Fix a number of issues with MTE, such as races on the tags being initialised vs the PG_mte_tagged flag as well as the lack of support for VM_SHARED when KVM is involved. Patches from Catalin Marinas and Peter Collingbourne"). - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. s390: - Second batch of the lazy destroy patches - First batch of KVM changes for kernel virtual != physical address support - Removal of a unused function x86: - Allow compiling out SMM support - Cleanup and documentation of SMM state save area format - Preserve interrupt shadow in SMM state save area - Respond to generic signals during slow page faults - Fixes and optimizations for the non-executable huge page errata fix. - Reprogram all performance counters on PMU filter change - Cleanups to Hyper-V emulation and tests - Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest running on top of a L1 Hyper-V hypervisor) - Advertise several new Intel features - x86 Xen-for-KVM: - Allow the Xen runstate information to cross a page boundary - Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured - Add support for 32-bit guests in SCHEDOP_poll - Notable x86 fixes and cleanups: - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. - Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. - Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. - Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. - Advertise (on AMD) that the SMM_CTL MSR is not supported - Remove unnecessary exports Generic: - Support for responding to signals during page faults; introduces new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks Selftests: - Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. - Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. - Introduce actual atomics for clear/set_bit() in selftests - Add support for pinning vCPUs in dirty_log_perf_test. - Rename the so called "perf_util" framework to "memstress". - Add a lightweight psuedo RNG for guest use, and use it to randomize the access pattern and write vs. read percentage in the memstress tests. - Add a common ucall implementation; code dedup and pre-work for running SEV (and beyond) guests in selftests. - Provide a common constructor and arch hook, which will eventually be used by x86 to automatically select the right hypercall (AMD vs. Intel). - A bunch of added/enabled/fixed selftests for ARM64, covering memslots, breakpoints, stage-2 faults and access tracking. - x86-specific selftest changes: - Clean up x86's page table management. - Clean up and enhance the "smaller maxphyaddr" test, and add a related test to cover generic emulation failure. - Clean up the nEPT support checks. - Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values. - Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). Documentation: - Remove deleted ioctls from documentation - Clean up the docs for the x86 MSR filter. - Various fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits) KVM: x86: Add proper ReST tables for userspace MSR exits/flags KVM: selftests: Allocate ucall pool from MEM_REGION_DATA KVM: arm64: selftests: Align VA space allocator with TTBR0 KVM: arm64: Fix benign bug with incorrect use of VA_BITS KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow KVM: x86: Advertise that the SMM_CTL MSR is not supported KVM: x86: remove unnecessary exports KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic" tools: KVM: selftests: Convert clear/set_bit() to actual atomics tools: Drop "atomic_" prefix from atomic test_and_set_bit() tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests perf tools: Use dedicated non-atomic clear/set bit helpers tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers KVM: arm64: selftests: Enable single-step without a "full" ucall() KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself KVM: Remove stale comment about KVM_REQ_UNHALT KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR KVM: Reference to kvm_userspace_memory_region in doc and comments KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-01 08:52:46 +0300