| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
These routines will be wired into a kvm ioctl in order to respond to
requests to enable / disable a device for Adapter Event Notifications /
Adapter Interuption Forwarding.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-16-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
A subsequent patch will be issuing SIC from KVM -- export the necessary
routine and make the operation control definitions available from a header.
Because the routine will now be exported, let's rename __zpci_set_irq_ctrl
to zpci_set_irq_ctrl and get rid of the zero'd iib wrapper function of
the same name.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-8-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Currently it is not detectable from within Linux when PCI instructions
are retried because of a busy condition. Detecting such conditions and
especially how long they lasted can however be quite useful in problem
determination. This patch enables this by adding an s390dbf error log
when a CC 2 is first encountered as well as after the retried
instruction.
Despite being unlikely it may be possible that these added debug
messages drown out important other messages so allow setting the debug
level in zpci_err_insn*() and set their level to 1 so they can be
filtered out if need be.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Currently when a PCI instruction returns a non-zero condition code it
can be very hard to tell from the s390dbf logs what kind of instruction
was executed. In case of PCI memory I/O (MIO) instructions it is even
impossible to tell if we attempted a load, store or block store or how
large the access was because only the address is logged.
Improve this by adding an indicator byte for the instruction type to the
error record and also store the length of the access for MIO
instructions where this can not be deduced from the request.
We use the following indicator values:
- 'l': PCI load
- 's': PCI store
- 'b': PCI store block
- 'L': PCI load (MIO)
- 'S': PCI store (MIO)
- 'B': PCI store block (MIO)
- 'M': MPCIFC
- 'R': RPCIT
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.
Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The PCI Write Barrier instruction ignores the registers encoded in it.
There is thus no need to explicitly set the register to zero or to
associate it with a variable at all. In the resulting binary this removes
an unnecessary lghi and it makes the code simpler.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The function handle of a PCI function is updated when disabling or
enabling it as well as when the function's availability changes or it
enters the error state.
Until now this only occurred either while there is no struct pci_dev
associated with the function yet or the function became unavailable.
This meant that leaving a stale function handle in the iomap either
didn't happen because there was no iomap yet or it lead to errors on PCI
access but so would the correct disabled function handle.
In the future a CLP Set PCI Function Disable/Enable cycle during PCI
device recovery may be done while the device is bound to a driver. In
this case we must update the iomap associated with the now-stale
function handle to ensure that the resulting zPCI instruction references
an accurate function handle.
Since the function handle is accessed by the PCI accessor helpers
without locking use READ_ONCE()/WRITE_ONCE() to mark this access and
prevent compiler optimizations that would move the load/store.
With that infrastructure in place let's also properly update the
function handle in the existing cases. This makes sure that in the
future debugging of a zPCI function access through the handle will
show an up to date handle reducing the chance of confusion. Also it
makes sure we have one single place where a zPCI function handle is
updated after initialization.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Provide support for PCI I/O instructions that work on mapped IO addresses.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This is a preparation patch for usage of new pci instructions.
No functional change.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Up until now all interrupts on s390 have been floating. For MSI interrupts
we've used a global summary bit vector (with a bit for each function) and
a per-function interrupt bit vector (with a bit per MSI).
This patch introduces a new IRQ delivery mode: CPU directed interrupts.
In this new mode a per-CPU interrupt bit vector is used (with a bit per
MSI per function). Further it is now possible to direct an IRQ to a
specific CPU so we can finally support IRQ affinity.
If an interrupt can't be delivered because the appointed CPU is occupied
by a hypervisor the interrupt is delivered floating. For this a global
summary bit vector is used (with a bit per CPU).
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
In a virtualized setup lazy flushing can lead to the hypervisor
running out of resources when lots of guest pages need to be
pinned. In this situation simply trigger a global flush to give
the hypervisor a chance to free some of these resources.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the arch/s390/pci/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
As of today QEMU does not provide the AIS facility to its guest. This
prevents Linux guests from using PCI devices as the ais facility is
checked during init. As this is just a performance optimization, we can
move the ais check into the code where we need it (calling the SIC
instruction). This is used at initialization and on interrupt. Both
places do not require any serialization, so we can simply skip the
instruction.
Since we will now get all interrupts, we can also avoid the 2nd scan.
As we can have multiple interrupts in parallel we might trigger spurious
irqs more often for the non-AIS case but the core code can handle that.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When we ask a function to stop creating interrupts this may fail
due to the function being already gone (e.g. after hot-unplug).
Consequently we don't free associated resources like summary bits
and bit vectors used for irq processing. This could lead to
situations where we ran out of these resources and fail to setup
new interrupts.
The fix is to just ignore the errors in cases where we can be
sure no new interrupts are generated.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use only simple inline assemblies which consist of a single basic
block if the register asm construct is being used.
Otherwise gcc would generate broken code if the compiler option
--sanitize-coverage=trace-pc would be used.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
zpci_err_insn writes stale stack content to the debugfs.
Ensure that the struct in zpci_err_insn is ordered in a way that
we don't have uninitialized holes in it. In addition to that
add the packed attribute.
Fixes: 3d8258e (s390/pci: move debug messages to debugfs)
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The error messages in pci_insn are for debug purposes only. Move
them to the debugfs.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Rename s390pci_xyz to zpci_xxz and set_irq_ctrl to zpci_set_irq_ctrl.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If a pci load instruction fails the content of the register where the
data is stored is possibly unchanged. Fix the inline assembly wrapper
__pcilg to not return stale data. Additionally fix the callers of this
function who access uninitialized variables.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Don't let pci_load and friends crash the kernel when called with
e.g. an invalid offset. Return -ENXIO instead.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use distinct (and hopefully sane) names for the pci instruction
wrappers.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Uninline pci related instruction wrappers to de-bloat the code:
add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302)
This is especially useful for the inlined pci read and write functions
which are used all over the kernel. Also remove the unused __stpcifc
while at it.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
