| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'def_bool X' is a shorthand for 'bool' plus 'default X'.
'def_bool' is redundant where 'bool' is already present, so 'def_bool X'
can be replaced with 'default X', or removed if X is 'n'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Reformat nested if-conditionals in Makefiles with 4 spaces
- Fix CONFIG_DEBUG_INFO_BTF builds for big endian
- Fix modpost for module srcversion
- Fix an escape sequence warning in gen_compile_commands.py
- Fix kallsyms to ignore ARMv4 thunk symbols
* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: ignore ARMv4 thunks along with others
modpost: trim leading spaces when processing source files list
gen_compile_commands: fix invalid escape sequence warning
kbuild: Fix changing ELF file type for output of gen_btf for big endian
docs: kconfig: Fix grammar and formatting
kbuild: use 4-space indentation when followed by conditionals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use a GB page for identity mapping only when memory of this size is
requested so that mapping of reserved regions is prevented which
would otherwise lead to system crashes on UV machines
* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
RISC-V:
- Fix steal-time related sparse warnings
x86:
- Cleanup gtod_is_based_on_tsc() to return "bool" instead of an "int"
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if
and only if the incoming events->nmi.pending is non-zero. If the
target vCPU is in the UNITIALIZED state, the spurious request will
result in KVM exiting to userspace, which in turn causes QEMU to
constantly acquire and release QEMU's global mutex, to the point
where the BSP is unable to make forward progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl
being incorrectly truncated, and ultimately causes KVM to think a
fixed counter has already been disabled (KVM thinks the old value
is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from
userspace that is ultimately ignored due to ignore_msrs=true
doesn't zero the output as intended.
Selftests cleanups and fixes:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build
failures when compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails
with an error code other than ENOENT (a Hyper-V selftest bug
resulted in an EMFILE, and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could
be left pending across multiple runs, resulting in incorrect
synchronization between the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix
false positives due to the number of mappings for memslot 0 (used
for code and data that is NOT being dirty logged) changing, e.g.
due to NUMA balancing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Fix double-free following kvm_pgtable_stage2_free_unlinked()
RISC-V: KVM: Use correct restricted types
RISC-V: paravirt: Use correct restricted types
RISC-V: paravirt: steal_time should be static
KVM: selftests: Don't assert on exact number of 4KiB in dirty log split test
KVM: selftests: Fix a semaphore imbalance in the dirty ring logging test
KVM: x86: Fix KVM_GET_MSRS stack info leak
KVM: arm64: Do not source virt/lib/Kconfig twice
KVM: x86/pmu: Fix type length error when reading pmu->fixed_ctr_ctrl
KVM: x86: Make gtod_is_based_on_tsc() return 'bool'
KVM: selftests: Make hyperv_clock require TSC based system clocksource
KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too
KVM: selftests: Use generic sys_clocksource_is_tsc() in vmx_nested_tsc_scaling_test
KVM: selftests: Generalize check_clocksource() from kvm_clock_test
KVM: x86: make KVM_REQ_NMI request iff NMI pending for vcpu
KVM: arm64: Fix circular locking dependency
KVM: selftests: Fail tests when open() fails with !ENOENT
KVM: selftests: Avoid infinite loop in hyperv_features when invtsc is missing
KVM: selftests: Delete superfluous, unused "stage" variable in AMX test
KVM: selftests: x86_64: Remove redundant newlines
...
|
|
GNU Make manual [1] clearly forbids a tab at the beginning of the
conditional directive line:
"Extra spaces are allowed and ignored at the beginning of the
conditional directive line, but a tab is not allowed."
This will not work for the next release of GNU Make, hence commit
82175d1f9430 ("kbuild: Replace tabs with spaces when followed by
conditionals") replaced the inappropriate tabs with 8 spaces.
However, the 8-space indentation cannot be visually distinguished.
Linus suggested 2-4 spaces for those nested if-statements. [2]
This commit redoes the replacement with 4 spaces.
[1]: https://www.gnu.org/software/make/manual/make.html#Conditional-Syntax
[2]: https://lore.kernel.org/all/CAHk-=whJKZNZWsa-VNDKafS_VfY4a5dAjG-r8BZgWk_a-xSepw@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
|
|
KVM x86 fixes for 6.8:
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
|
|
When ident_pud_init() uses only gbpages to create identity maps, large
ranges of addresses not actually requested can be included in the
resulting table; a 4K request will map a full GB. On UV systems, this
ends up including regions that will cause hardware to halt the system
if accessed (these are marked "reserved" by BIOS). Even processor
speculation into these regions is enough to trigger the system halt.
Only use gbpages when map creation requests include the full GB page
of space. Fall back to using smaller 2M pages when only portions of a
GB page are included in the request.
No attempt is made to coalesce mapping requests. If a request requires
a map entry at the 2M (pmd) level, subsequent mapping requests within
the same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full
gbpage. Existing usage starts with larger regions and then adds
smaller regions, so this should not have any great consequence.
[ dhansen: fix up comment formatting, simplifty changelog ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com
|
|
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Correct the minimum CPU family for Transmeta Crusoe in Kconfig so
that such hw can boot again
- Do not take into accout XSTATE buffer size info supplied by userspace
when constructing a sigreturn frame
- Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an
MCE is encountered so that it can be properly recovered from instead
of simply panicking
* tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
x86/fpu: Stop relying on userspace for info to fault in xsave buffer
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
|
|
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f53 ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The only notable change here is the patch that changes the way we deal
with spurious errors from the EFI memory attribute protocol. This will
be backported to v6.6, and is intended to ensure that we will not
paint ourselves into a corner when we tighten this further in order to
comply with MS requirements on signed EFI code.
Note that this protocol does not currently exist in x86 production
systems in the field, only in Microsoft's fork of OVMF, but it will be
mandatory for Windows logo certification for x86 PCs in the future.
- Tighten ELF relocation checks on the RISC-V EFI stub
- Give up if the new EFI memory attributes protocol fails spuriously
on x86
- Take care not to place the kernel in the lowest 16 MB of DRAM on
x86
- Omit special purpose EFI memory from memblock
- Some fixes for the CXL CPER reporting code
- Make the PE/COFF layout of mixed-mode capable images comply with a
strict interpretation of the spec"
* tag 'efi-fixes-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
cxl/trace: Remove unnecessary memcpy's
cxl/cper: Fix errant CPER prints for CXL events
efi: Don't add memblocks for soft-reserved memory
efi: runtime: Fix potential overflow of soft-reserved region size
efi/libstub: Add one kernel-doc comment
x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR
x86/efistub: Give up if memory attribute protocol returns an error
riscv/efistub: Tighten ELF relocation check
riscv/efistub: Ensure GP-relative addressing is not used
|
|
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
|
|
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Avoid false positive for check that only matters on AMD processors
x86:
- Give a hint when Win2016 might fail to boot due to XSAVES &&
!XSAVEC configuration
- Do not allow creating an in-kernel PIT unless an IOAPIC already
exists
RISC-V:
- Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)
S390:
- fix CC for successful PQAP instruction
- fix a race when creating a shadow page"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
x86/kvm: Fix SEV check in sev_map_percpu_data()
KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
KVM: x86: Check irqchip mode before create PIT
KVM: riscv: selftests: Add Zfa extension to get-reg-list test
RISC-V: KVM: Allow Zfa extension for Guest/VM
KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
RISC-V: KVM: Allow Zihintntl extension for Guest/VM
KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
RISC-V: KVM: Allow vector crypto extensions for Guest/VM
KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
KVM: riscv: selftests: Add Zbc extension to get-reg-list test
RISC-V: KVM: Allow Zbc extension for Guest/VM
KVM: s390: fix cc for successful PQAP
KVM: s390: vsie: fix race during shadow creation
|
|
After commit a9ef277488cf ("x86/kvm: Fix SEV check in
sev_map_percpu_data()"), there is a build error when building
x86_64_defconfig with GCOV using LLVM:
ld.lld: error: undefined symbol: cc_vendor
>>> referenced by kvm.c
>>> arch/x86/kernel/kvm.o:(kvm_smp_prepare_boot_cpu) in archive vmlinux.a
which corresponds to
if (cc_vendor != CC_VENDOR_AMD ||
!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
return;
Without GCOV, clang is able to eliminate the use of cc_vendor because
cc_platform_has() evaluates to false when CONFIG_ARCH_HAS_CC_PLATFORM is
not set, meaning that if statement will be true no matter what value
cc_vendor has.
With GCOV, the instrumentation keeps the use of cc_vendor around for
code coverage purposes but cc_vendor is only declared, not defined,
without CONFIG_ARCH_HAS_CC_PLATFORM, leading to the build error above.
Provide a macro definition of cc_vendor when CONFIG_ARCH_HAS_CC_PLATFORM
is not set with a value of CC_VENDOR_NONE, so that the first condition
can always be evaluated/eliminated at compile time, avoiding the build
error altogether. This is very similar to the situation prior to
commit da86eb961184 ("x86/coco: Get rid of accessor functions").
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Message-Id: <20240202-provide-cc_vendor-without-arch_has_cc_platform-v1-1-09ad5f2a3099@kernel.org>
Fixes: a9ef277488cf ("x86/kvm: Fix SEV check in sev_map_percpu_data()", 2024-01-31)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 6abe9c1386e5 ("KVM: X86: Move ignore_msrs handling upper the
stack") changed the 'ignore_msrs' handling, including sanitizing return
values to the caller. This was fine until commit 12bc2132b15e ("KVM:
X86: Do the same ignore_msrs check for feature msrs") which allowed
non-existing feature MSRs to be ignored, i.e. to not generate an error
on the ioctl() level. It even tried to preserve the sanitization of the
return value. However, the logic is flawed, as '*data' will be
overwritten again with the uninitialized stack value of msr.data.
Fix this by simplifying the logic and always initializing msr.data,
vanishing the need for an additional error exit path.
Fixes: 12bc2132b15e ("KVM: X86: Do the same ignore_msrs check for feature msrs")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240203124522.592778-2-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)
This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.
Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.
So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)
Fixes: 3e3eabe26dc8 ("x86/boot: Increase section and file alignment to 4k/512")
Reported-by: Mike Beaton <mjsbeaton@gmail.com>
Link: https://lkml.kernel.org/r/CAHzAAWQ6srV6LVNdmfbJhOwhBw5ZzxxZZ07aHt9oKkfYAdvuQQ%40mail.gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use a u64 instead of a u8 when taking a snapshot of pmu->fixed_ctr_ctrl
when reprogramming fixed counters, as truncating the value results in KVM
thinking fixed counter 2 is already disabled (the bug also affects fixed
counters 3+, but KVM doesn't yet support those). As a result, if the
guest disables fixed counter 2, KVM will get a false negative and fail to
reprogram/disable emulation of the counter, which can leads to incorrect
counts and spurious PMIs in the guest.
Fixes: 76d287b2342e ("KVM: x86/pmu: Drop "u8 ctrl, int idx" for reprogram_fixed_counter()")
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240123221220.3911317-1-mizhang@google.com
[sean: rewrite changelog to call out the effects of the bug]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UML build with clang-18 and newer
- Avoid using the alias attribute in host programs
- Replace tabs with spaces when followed by conditionals for future GNU
Make versions
- Fix rpm-pkg for the systemd-provided kernel-install tool
- Fix the undefined behavior in Kconfig for a 'int' symbol used in a
conditional
* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: initialize sym->curr.tri to 'no' for all symbol types again
kbuild: rpm-pkg: simplify installkernel %post
kbuild: Replace tabs with spaces when followed by conditionals
modpost: avoid using the alias attribute
kbuild: fix W= flags in the help message
modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
um: Fix adding '-no-pie' for clang
kbuild: defconf: use SRCARCH to find merged configs
|
|
gtod_is_based_on_tsc() is boolean in nature, i.e. it returns '1' for good
clocksources and '0' otherwise. Moreover, its result is used raw by
kvm_get_time_and_clockread()/kvm_get_walltime_and_clockread() which are
'bool'.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-6-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The function sev_map_percpu_data() checks if it is running on an SEV
platform by checking the CC_ATTR_GUEST_MEM_ENCRYPT attribute. However,
this attribute is also defined for TDX.
To avoid false positives, add a cc_vendor check.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 4d96f9109109 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Rientjes <rientjes@google.com>
Message-Id: <20240124130317.495519-1-kirill.shutemov@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since commit b0563468eeac ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
kernel unconditionally clears the XSAVES CPU feature bit on Zen1/2 CPUs.
Because KVM CPU caps are initialized from the kernel boot CPU features this
makes the XSAVES feature also unavailable for KVM guests in this case.
At the same time the XSAVEC feature is left enabled.
Unfortunately, having XSAVEC but no XSAVES in CPUID breaks Hyper-V enabled
Windows Server 2016 VMs that have more than one vCPU.
Let's at least give users hint in the kernel log what could be wrong since
these VMs currently simply hang at boot with a black screen - giving no
clue what suddenly broke them and how to make them work again.
Trigger the kernel message hint based on the particular guest ID written to
the Guest OS Identity Hyper-V MSR implemented by KVM.
Defer this check to when the L1 Hyper-V hypervisor enables SVM in EFER
since we want to limit this message to Hyper-V enabled Windows guests only
(Windows session running nested as L2) but the actual Guest OS Identity MSR
write is done by L1 and happens before it enables SVM.
Fixes: b0563468eeac ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <b83ab45c5e239e5d148b0ae7750133a67ac9575c.1706127425.git.maciej.szmigiero@oracle.com>
[Move some checks before mutex_lock(), rename function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As the kvm api(https://docs.kernel.org/virt/kvm/api.html) reads,
KVM_CREATE_PIT2 call is only valid after enabling in-kernel irqchip
support via KVM_CREATE_IRQCHIP.
Without this check, I can create PIT first and enable irqchip-split
then, which may cause the PIT invalid because of lacking of in-kernel
PIC to inject the interrupt.
Signed-off-by: Tengfei Yu <moehanabichan@gmail.com>
Message-Id: <20240125050823.4893-1-moehanabichan@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_vcpu_ioctl_x86_set_vcpu_events() routine makes 'KVM_REQ_NMI'
request for a vcpu even when its 'events->nmi.pending' is zero.
Ex:
qemu_thread_start
kvm_vcpu_thread_fn
qemu_wait_io_event
qemu_wait_io_event_common
process_queued_cpu_work
do_kvm_cpu_synchronize_post_init/_reset
kvm_arch_put_registers
kvm_put_vcpu_events (cpu, level=[2|3])
This leads vCPU threads in QEMU to constantly acquire & release the
global mutex lock, delaying the guest boot due to lock contention.
Add check to make KVM_REQ_NMI request only if vcpu has NMI pending.
Fixes: bdedff263132 ("KVM: x86: Route pending NMIs from userspace through process_nmi()")
Cc: stable@vger.kernel.org
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240103075343.549293-1-ppandit@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This is needed for the future (post make-4.4.1) versions of gnu make.
Starting from https://git.savannah.gnu.org/cgit/make.git/commit/?id=07fcee35f058a876447c8a021f9eb1943f902534
gnu make won't allow conditionals to follow recipe prefix.
For example there is a tab followed by ifeq on line 324 in the root Makefile.
With the new make this conditional causes the following
$ make cpu.o
/home/dgoncharov/src/linux-kbuild/Makefile:2063: *** missing 'endif'. Stop.
make: *** [Makefile:240: __sub-make] Error 2
This patch replaces tabs followed by conditionals with 8 spaces.
See https://savannah.gnu.org/bugs/?64185 and
https://savannah.gnu.org/bugs/?64259 for details.
Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net>
Reported-by: Martin Dorey <martin.dorey@hitachivantara.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Before this change, the expected size of the user space buffer was
taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed
from user-space, so it is possible construct a sigreturn frame where:
* fx_sw->xstate_size is smaller than the size required by valid bits in
fx_sw->xfeatures.
* user-space unmaps parts of the sigrame fpu buffer so that not all of
the buffer required by xrstor is accessible.
In this case, xrstor tries to restore and accesses the unmapped area
which results in a fault. But fault_in_readable succeeds because buf +
fx_sw->xstate_size is within the still mapped area, so it goes back and
tries xrstor again. It will spin in this loop forever.
Instead, fault in the maximum size which can be touched by XRSTOR (taken
from fpstate->user_size).
[ dhansen: tweak subject / changelog ]
Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path")
Reported-by: Konstantin Bogomolov <bogomolov@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
|
|
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
|
|
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add model ranges starting at 0x20, 0x40 and 0x70 to the synthetic
feature flag X86_FEATURE_ZEN5.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240124220749.2983-1-mario.limonciello@amd.com
|
|
Presently ia32 registers stored in ptregs are unconditionally cast to
unsigned int by the ia32 stub. They are then cast to long when passed to
__se_sys*, but will not be sign extended.
This takes the sign of the syscall argument into account in the ia32
stub. It still casts to unsigned int to avoid implementation specific
behavior. However then casts to int or unsigned int as necessary. So that
the following cast to long sign extends the value.
This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently
the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the
maximum number of events.
It doesn't appear other systemcalls with signed arguments are effected
because they all have compat variants defined and wired up.
Fixes: ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com
Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/
|
|
Server product based on the Atom Darkmont core.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240117191844.56180-1-tony.luck@intel.com
|
|
Add a synthetic feature flag for Zen5.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240104201138.5072-1-bp@alien8.de
|
|
Several inlined functions subject to paravirt patching are referencing
BUG_func() after the recent switch to the alternative patching
mechanism.
As those functions can legally be used by non-GPL modules, BUG_func()
must be usable by those modules, too. So use EXPORT_SYMBOL() when
exporting BUG_func().
Fixes: 9824b00c2b58 ("x86/paravirt: Move some functions and defines to alternative.c")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240109082232.22657-1-jgross@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are three new drivers this cycle. Also the cmos driver is
getting fixes for longstanding wakeup issues on AMD.
New drivers:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support"
* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
rtc: da9063: Use dev_err_probe()
rtc: da9063: Use device_get_match_data()
rtc: da9063: Make IRQ as optional
rtc: max31335: Fix comparison in max31335_volatile_reg()
rtc: max31335: use regmap_update_bits_check
rtc: max31335: remove unecessary locking
rtc: max31335: add driver support
dt-bindings: rtc: max31335: add max31335 bindings
rtc: rv8803: add wakeup-source support
rtc: ac100: remove misuses of kernel-doc
rtc: class: Remove usage of the deprecated ida_simple_xx() API
rtc: MAINTAINERS: drop Alessandro Zummo
rtc: ma35d1: remove hardcoded UIE support
dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
rtc: rv8803: Add power management support
rtc: ds3232: avoid unused-const-variable warning
rtc: lpc24xx: add missing dependency
rtc: tps6594: Add driver for TPS6594 RTC
rtc: Add driver for Nuvoton ma35d1 rtc controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Mark 32bit syscall helpers as clobbering memory
um: Remove unused register save/restore functions
um: Rely on PTRACE_SETREGSET to set FS/GS base registers
Documentation: kunit: Add clang UML coverage example
arch: um: Add Clang coverage support
um: time-travel: fix time corruption
um: net: Fix return type of uml_net_start_xmit()
um: Always inline stub functions
um: Do not use printk in userspace trampoline
um: Reap winch thread if it fails
um: Do not use printk in SIGWINCH helper thread
um: Don't use vfprintf() for os_info()
um: Make errors to stop ptraced child fatal during startup
um: Drop NULL check from start_userspace
um: Drop support for hosts without SYSEMU_SINGLESTEP support
um: document arch_futex_atomic_op_inuser
um: mmu: remove stub_pages
um: Fix naming clash between UML and scheduler
um: virt-pci: fix platform map offset
|
|
- Convert pci-host-common.c platform .remove() callback to .remove_new()
returning 'void' since it's not useful to return error codes here (Uwe
Kleine-König)
- Log a message about updating AMD USB controller class code (so dwc3, not
xhci, claims it) only when we actually change it (Guilherme G. Piccoli)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc
(Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather
than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen)
* pci/enumeration:
PCI: Fix 64GT/s effective data rate calculation
x86/pci: Clean up open-coded PCIBIOS return code mangling
scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal
powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
x86/pci: Use PCI_HEADER_TYPE_* instead of literals
PCI: Only override AMD USB controller if required
PCI: host-generic: Convert to platform remove callback returning void
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0d7
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
|
