summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2024-02-25Merge tag 'x86_urgent_for_v6.8_rc6' of ↵Linus Torvalds12-35/+85
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure clearing CPU buffers using VERW happens at the latest possible point in the return-to-userspace path, otherwise memory accesses after the VERW execution could cause data to land in CPU buffers again * tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/VMX: Move VERW closer to VMentry for MDS mitigation KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key x86/entry_32: Add VERW just before userspace transition x86/entry_64: Add VERW just before userspace transition x86/bugs: Add asm helpers for executing VERW
2024-02-25Merge tag 'powerpc-6.8-4' of ↵Linus Torvalds5-10/+73
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a crash when hot adding a PCI device to an LPAR since recent changes - Fix nested KVM level-2 guest reboot failure due to empty 'arch_compat' Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav Batra, and Vaibhav Jain. * tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat' powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
2024-02-25Merge tag 'cxl-fixes-6.8-rc6' of ↵Linus Torvalds1-13/+8
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Dan Williams: "A collection of significant fixes for the CXL subsystem. The largest change in this set, that bordered on "new development", is the fix for the fact that the location of the new qos_class attribute did not match the Documentation. The fix ends up deleting more code than it added, and it has a new unit test to backstop basic errors in this interface going forward. So the "red-diff" and unit test saved the "rip it out and try again" response. In contrast, the new notification path for firmware reported CXL errors (CXL CPER notifications) has a locking context bug that can not be fixed with a red-diff. Given where the release cycle stands, it is not comfortable to squeeze in that fix in these waning days. So, that receives the "back it out and try again later" treatment. There is a regression fix in the code that establishes memory NUMA nodes for platform CXL regions. That has an ack from x86 folks. There are a couple more fixups for Linux to understand (reassemble) CXL regions instantiated by platform firmware. The policy around platforms that do not match host-physical-address with system-physical-address (i.e. systems that have an address translation mechanism between the address range reported in the ACPI CEDT.CFMWS and endpoint decoders) has been softened to abort driver load rather than teardown the memory range (can cause system hangs). Lastly, there is a robustness / regression fix for cases where the driver would previously continue in the face of error, and a fixup for PCI error notification handling. Summary: - Fix NUMA initialization from ACPI CEDT.CFMWS - Fix region assembly failures due to async init order - Fix / simplify export of qos_class information - Fix cxl_acpi initialization vs single-window-init failures - Fix handling of repeated 'pci_channel_io_frozen' notifications - Workaround platforms that violate host-physical-address == system-physical address assumptions - Defer CXL CPER notification handling to v6.9" * tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/acpi: Fix load failures due to single window creation failure acpi/ghes: Remove CXL CPER notifications cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window cxl/test: Add support for qos_class checking cxl: Fix sysfs export of qos_class for memdev cxl: Remove unnecessary type cast in cxl_qos_class_verify() cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf' cxl/region: Allow out of order assembly of autodiscovered regions cxl/region: Handle endpoint decoders in cxl_region_find_decoder() x86/numa: Fix the sort compare func used in numa_fill_memblks() x86/numa: Fix the address overlap check in numa_fill_memblks() cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
2024-02-24Merge tag 'loongarch-fixes-6.8-3' of ↵Linus Torvalds5-98/+113
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix two cpu-hotplug issues, fix the init sequence about FDT system, fix the coding style of dts, and fix the wrong CPUCFG ID handling of KVM" * tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Streamline kvm_check_cpucfg() and improve comments LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask() LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg() LoongArch: dts: Minor whitespace cleanup LoongArch: Call early_init_fdt_scan_reserved_mem() earlier LoongArch: Update cpu_sibling_map when disabling nonboot CPUs LoongArch: Disable IRQ before init_fn() for nonboot CPUs
2024-02-23Merge tag 'parisc-for-6.8-rc6' of ↵Linus Torvalds4-18/+9
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Fixes CPU hotplug, the parisc stack unwinder and two possible build errors in kprobes and ftrace area: - Fix CPU hotplug - Fix unaligned accesses and faults in stack unwinder - Fix potential build errors by always including asm-generic/kprobes.h - Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check" * tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix stack unwinder parisc/kprobes: always include asm-generic/kprobes.h parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check Revert "parisc: Only list existing CPUs in cpu_possible_mask"
2024-02-23Merge tag 'arm-fixes-6.8-2' of ↵Linus Torvalds65-131/+119
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull arm and RISC-V SoC fixes from Arnd Bergmann: "The Rockchip and IMX8 platforms get a number of fixes for dts files in order to address some misconfigurations, including a regression for USB-C support on some boards. The other dts fixes are part of a series by Rob Herring to clean up another class of dtc compiler warnings across all platforms, with a few others helping out as well. With this, we can enable the warning for the coming merge window without introducing regressions. Conor Dooley has collected fixes for RISC-V platforms, both for the dts files and for platofrm specific drivers. The ep93xx platform gets a regression for for its gpio descriptors" * tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits) ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback() arm64: dts: qcom: Fix interrupt-map cell sizes arm: dts: Fix dtc interrupt_map warnings arm64: dts: Fix dtc interrupt_provider warnings arm: dts: Fix dtc interrupt_provider warnings arm64: dts: freescale: Disable interrupt_map check ARM: ep93xx: Add terminator to gpiod_lookup_table riscv: dts: sifive: add missing #interrupt-cells to pmic arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node arm64: dts: rockchip: set num-cs property for spi on px30 arm64: dts: rockchip: minor rk3588 whitespace cleanup riscv: dts: starfive: replace underscores in node names bus: imx-weim: fix valid range check Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector" Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector" arm64: dts: tqma8mpql: fix audio codec iov-supply arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes ...
2024-02-23Merge tag 'arm64-fixes' of ↵Linus Torvalds4-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A simple fix to a definition in the CXL PMU driver, a couple of patches to restore SME control registers on the resume path (since Arm's fast model now clears them) and a revert for our jump label asm constraints after Geert noticed they broke the build with GCC 5.5. There was then the ensuing discussion about raising the minimum GCC (and corresponding binutils) versions at [1], but for now we'll keep things working as they were until that goes ahead. - Revert fix to jump label asm constraints, as it regresses the build with some GCC 5.5 toolchains. - Restore SME control registers when resuming from suspend - Fix incorrect filter definition in CXL PMU driver" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend arm64/sme: Restore SME registers on exit from suspend Revert "arm64: jump_label: use constraints "Si" instead of "i"" perf: CXL: fix CPMU filter value mask length
2024-02-23Merge tag 's390-6.8-3' of ↵Linus Torvalds5-17/+7
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix invalid -EBUSY on ccw_device_start() which can lead to failing device initialization - Add missing multiplication by 8 in __iowrite64_copy() to get the correct byte length before calling zpci_memcpy_toio() - Various config updates * tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: fix invalid -EBUSY on ccw_device_start s390: use the correct count for __iowrite64_copy() s390/configs: update default configurations s390/configs: enable INIT_STACK_ALL_ZERO in all configurations s390/configs: provide compat topic configuration target
2024-02-23Merge tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+2
Pull drm fixes from Dave Airlie: "This is the weekly drm fixes. Non-drivers there is a fbdev/sparc fix, syncobj, ttm and buddy fixes. On the driver side, ivpu, meson, i915 have a small fix each. Then amdgpu and xe have a bunch. Nouveau has some minor uapi additions to give userspace some useful info along with a Kconfig change to allow the new GSP firmware paths to be used by default on the GPUs it supports. Seems about the usual amount for this time of release cycle. fbdev: - fix sparc undefined reference syncobj: - fix sync obj fence waiting - handle NULL fence in syncobj eventfd code ttm: - fix invalid free buddy: - fix list handling - fix 32-bit build meson: - don't remove bridges from other drivers nouveau: - fix build warnings - add two minor info parameters - add a Kconfig to allow GSP by default on some GPUs ivpu: - allow fw to do initial tile config i915: - fix TV mode amdgpu: - Suspend/resume fixes - Backlight error fix - DCN 3.5 fixes - Misc fixes xe: - Remove support for persistent exec_queues - Drop a reduntant sysfs newline printout - A three-patch fix for a VM_BIND rebind optimization path - Fix a modpost warning on an xe KUNIT module" * tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drm: (27 commits) nouveau: add an ioctl to report vram usage nouveau: add an ioctl to return vram bar size. nouveau/gsp: add kconfig option to enable GSP paths by default drm/amdgpu: Fix the runtime resume failure issue drm/amd/display: fix null-pointer dereference on edid reading drm/amd/display: Fix memory leak in dm_sw_fini() drm/amd/display: fix input states translation error for dcn35 & dcn351 drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv drm/amd/display: Only allow dig mapping to pwrseq in new asic drm/amd/display: adjust few initialization order in dm drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set drm/ttm: Fix an invalid freeing on already freed page in error path sparc: Fix undefined reference to fb_is_primary_device drm/xe: Fix modpost warning on xe_mocs kunit module drm/xe/xe_gt_idle: Drop redundant newline in name drm/xe: Return 2MB page size for compact 64k PTEs drm/xe: Add XE_VMA_PTE_64K VMA flag drm/xe: Fix xe_vma_set_pte_size drm/xe/uapi: Remove support for persistent exec_queues ...
2024-02-23Merge tag 'renesas-fixes-for-v6.8-tag1' of ↵Arnd Bergmann8-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v6.8 - Add missing #interrupt-cells to DA9063 nodes. * tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes Link: https://lore.kernel.org/r/cover.1708597150.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-23Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of ↵Arnd Bergmann3-8/+9
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Devicetree fixes for v6.8-rc6 Two fixes for W=2 issues in devicetrees, which should constitute fixes for all reasonable-to-fix W=2 problems on RISC-V. The others are caused by standard USB and MMC property names containing underscores that are not likely to ever change. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: sifive: add missing #interrupt-cells to pmic riscv: dts: starfive: replace underscores in node names Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-23LoongArch: KVM: Streamline kvm_check_cpucfg() and improve commentsWANG Xuerui1-22/+20
All the checks currently done in kvm_check_cpucfg can be realized with early returns, so just do that to avoid extra cognitive burden related to the return value handling. While at it, clean up comments of _kvm_get_cpucfg_mask() and kvm_check_cpucfg(), by removing comments that are merely restatement of the code nearby, and paraphrasing the rest so they read more natural for English speakers (that likely are not familiar with the actual Chinese- influenced grammar). No functional changes intended. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()WANG Xuerui1-3/+3
The function is not actually a getter of guest CPUCFG, but rather validation of the input CPUCFG ID plus information about the supported bit flags of that CPUCFG leaf. So rename it to avoid confusion. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()WANG Xuerui1-17/+18
The range check for the CPUCFG ID is wrong (should have been a || instead of &&) and useless in effect, so fix the obvious mistake. Furthermore, the juggling of the temp return value is unnecessary, because it is semantically equivalent and more readable to just return at every switch case's end. This is done too to avoid potential bugs in the future related to the unwanted complexity. Also, the return value of _kvm_get_cpucfg is meant to be checked, but this was not done, so bad CPUCFG IDs wrongly fall back to the default case and 0 is incorrectly returned; check the return value to fix the UAPI behavior. While at it, also remove the redundant range check in kvm_check_cpucfg, because out-of-range CPUCFG IDs are already rejected by the -EINVAL as returned by _kvm_get_cpucfg(). Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support") Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support") Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: dts: Minor whitespace cleanupKrzysztof Kozlowski2-2/+2
The DTS code coding style expects exactly one space before '{' character. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Call early_init_fdt_scan_reserved_mem() earlierHuacai Chen1-2/+2
The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the arch_mem_init() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier in the init sequence, so that the reserved memory regions are set aside before any allocations are done using memblock. Cc: stable@vger.kernel.org Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table") Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Update cpu_sibling_map when disabling nonboot CPUsHuacai Chen1-53/+68
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23LoongArch: Disable IRQ before init_fn() for nonboot CPUsHuacai Chen1-0/+1
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-23Merge tag 'drm-misc-fixes-2024-02-22' of ↵Dave Airlie2-2/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A list handling fix and 64bit division on 32bit platform fix for the drm/buddy allocator, a cast warning and an initialization fix for nouveau, a bridge handling fix for meson, an initialisation fix for ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two fence handling fixes for syncobj. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/gl2antuifidtzn3dfm426p7xwh5fxj23behagwh26owfnosh2w@gqoa7vj5prnh
2024-02-22Merge tag 'net-6.8.0-rc6' of ↵Linus Torvalds3-9/+20
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - af_unix: fix another unix GC hangup Previous releases - regressions: - core: fix a possible AF_UNIX deadlock - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready() - netfilter: nft_flow_offload: release dst in case direct xmit path is used - bridge: switchdev: ensure MDB events are delivered exactly once - l2tp: pass correct message length to ip6_append_data - dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished() - tls: fixes for record type handling with PEEK - devlink: fix possible use-after-free and memory leaks in devlink_init() Previous releases - always broken: - bpf: fix an oops when attempting to read the vsyscall page through bpf_probe_read_kernel - sched: act_mirred: use the backlog for mirred ingress - netfilter: nft_flow_offload: fix dst refcount underflow - ipv6: sr: fix possible use-after-free and null-ptr-deref - mptcp: fix several data races - phonet: take correct lock to peek at the RX queue Misc: - handful of fixes and reliability improvements for selftests" * tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) l2tp: pass correct message length to ip6_append_data net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY selftests: ioam: refactoring to align with the fix Fix write to cloned skb in ipv6_hop_ioam() phonet/pep: fix racy skb_queue_empty() use phonet: take correct lock to peek at the RX queue net: sparx5: Add spinlock for frame transmission from CPU net/sched: flower: Add lock protection when remove filter handle devlink: fix port dump cmd type net: stmmac: Fix EST offset for dwmac 5.10 tools: ynl: don't leak mcast_groups on init error tools: ynl: make sure we always pass yarg to mnl_cb_run net: mctp: put sock on tag allocation failure netfilter: nf_tables: use kzalloc for hook allocation netfilter: nf_tables: register hooks last when adding new chain/flowtable netfilter: nft_flow_offload: release dst in case direct xmit path is used netfilter: nft_flow_offload: reset dst in route object after setting up flow netfilter: nf_tables: set dormant flag on hook register failure selftests: tls: add test for peeking past a record of a different type selftests: tls: add test for merging of same-type control messages ...
2024-02-22ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodesGeert Uytterhoeven8-0/+8
make dtbs_check W=2: arch/arm/boot/dts/renesas/r8a7790-lager.dts:444.11-458.5: Warning (interrupt_provider): /i2c-mux4/pmic@58: Missing '#interrupt-cells' in interrupt provider ... Fix this by adding the missing #interrupt-cells properties. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/a351e503ea97fb1af68395843f513925ff1bdf26.1707922460.git.geert+renesas@glider.be
2024-02-22Merge tag 'for-netdev' of ↵Paolo Abeni3-9/+20
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-02-22 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 24 day(s) which contain a total of 15 files changed, 217 insertions(+), 17 deletions(-). The main changes are: 1) Fix a syzkaller-triggered oops when attempting to read the vsyscall page through bpf_probe_read_kernel and friends, from Hou Tao. 2) Fix a kernel panic due to uninitialized iter position pointer in bpf_iter_task, from Yafang Shao. 3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel, from Martin KaFai Lau. 4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET) due to incorrect truesize accounting, from Sebastian Andrzej Siewior. 5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready, from Shigeru Yoshida. 6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be resolved, from Hari Bathini. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() selftests/bpf: Add negtive test cases for task iter bpf: Fix an issue due to uninitialized bpf_iter_task selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel selftest/bpf: Test the read of vsyscall page under x86-64 x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault() x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h bpf, scripts: Correct GPL license name xsk: Add truesize to skb_add_rx_frag(). bpf: Fix warning for bpf_cpumask in verifier ==================== Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull kvm fixes from Paolo Bonzini: "Two fixes for ARM ITS emulation. Unmapped interrupts were used instead of ignored, causing NULL pointer dereferences" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
2024-02-21s390: use the correct count for __iowrite64_copy()Jason Gunthorpe1-1/+1
The signature for __iowrite64_copy() requires the number of 64 bit quantities, not bytes. Multiple by 8 to get to a byte length before invoking zpci_memcpy_toio() Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn") Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-21sparc: Fix undefined reference to fb_is_primary_deviceJavier Martinez Canillas2-2/+2
Commit 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") added a new FB_CORE Kconfig symbol, that can be enabled to only have fbcon/VT and DRM fbdev emulation, but without support for any legacy fbdev driver. Unfortunately, it missed to change the CONFIG_FB in arch/sparc makefiles, which leads to the following linking error in some sparc64 configurations: sparc64-linux-ld: drivers/video/fbdev/core/fbcon.o: in function `fbcon_fb_registered': >> fbcon.c:(.text+0x4f60): undefined reference to `fb_is_primary_device' Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202401290306.IV8rhJ02-lkp@intel.com/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240220095428.3341195-1-javierm@redhat.com
2024-02-21Merge tag 'kvmarm-fixes-6.8-3' of ↵Paolo Bonzini1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.8, take #3 - Check for the validity of interrupts handled by a MOVALL command - Check for the validity of interrupts while reading the pending state on enabling LPIs.
2024-02-21KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handlerOliver Upton1-0/+2
It is possible that an LPI mapped in a different ITS gets unmapped while handling the MOVALL command. If that is the case, there is no state that can be migrated to the destination. Silently ignore it and continue migrating other LPIs. Cc: stable@vger.kernel.org Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-02-21KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()Oliver Upton1-0/+3
vgic_get_irq() may not return a valid descriptor if there is no ITS that holds a valid translation for the specified INTID. If that is the case, it is safe to silently ignore it and continue processing the LPI pending table. Cc: stable@vger.kernel.org Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-02-21Merge branch 'for-6.8/cxl-cper' into for-6.8/cxlDan Williams120-346/+725
Pick up CXL CPER notification removal for v6.8-rc6, to return in a later merge window.
2024-02-20arm64: dts: qcom: Fix interrupt-map cell sizesRob Herring2-12/+12
The PCI node interrupt-map properties have the wrong size as #address-cells in the interrupt parent are not accounted for. The dtc interrupt_map check catches this, but the warning is off because its dependency, interrupt_provider, is off by default. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-5-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20arm: dts: Fix dtc interrupt_map warningsRob Herring3-4/+8
The dtc interrupt_map warning is off because its dependency, interrupt_provider, is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-4-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20arm64: dts: Fix dtc interrupt_provider warningsRob Herring9-5/+7
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Acked-by: Chanho Min <chanho.min@lge.com> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20arm: dts: Fix dtc interrupt_provider warningsRob Herring24-58/+18
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20arm64: dts: freescale: Disable interrupt_map checkRob Herring1-0/+19
Several Freescale Layerscape platforms extirq binding use a malformed interrupt-map property missing parent address cells. These are documented in of_irq_imap_abusers list in drivers/of/irq.c. In order to enable dtc interrupt_map check tree wide, we need to disable it for these platforms which will not be fixed (as that would break compatibility). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-1-f2dee1292525@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20Merge tag 'v6.8-rockchip-dtsfixes1' of ↵Arnd Bergmann10-26/+21
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Some fixes to make devicetrees conform to bindings better (pwm irqs), dt styling fixes (unneeded jaguar status, whitespaces, Cool Pi regulator naming) and functionality fixes (px30 spi chipselect number, allowing rk3588-evb1 to turn off, pcie lane numbers on CoolPi, wrong gpio-names on Indidroid Nova and some CoolPi sdmmc aliases to match what uboot uses). * tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node arm64: dts: rockchip: set num-cs property for spi on px30 arm64: dts: rockchip: minor rk3588 whitespace cleanup arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B arm64: dts: rockchip: mark system power controller on rk3588-evb1 Link: https://lore.kernel.org/r/2450634.jE0xQCEvom@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20Merge tag 'imx-fixes-6.8' of ↵Arnd Bergmann4-18/+16
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.8: - A tqma8mpql device tree fix to correct audio codec iov-supply. - A couple of USB-C connector DT description revert to fix regression on imx8mp-dhcom-pdk3 and imx8mn-var-som-symphony board. - Fix valid range check for imx-weim bus driver. - Disable UART4 on Data Modul i.MX8M Plus eDM SBC to avoid boot hang in case that RDC protection is in place. * tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: bus: imx-weim: fix valid range check Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector" Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector" arm64: dts: tqma8mpql: fix audio codec iov-supply arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC Link: https://lore.kernel.org/r/20240206151744.2459-1-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20ARM: ep93xx: Add terminator to gpiod_lookup_tableNikita Shubin1-0/+1
Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Cc: stable@vger.kernel.org Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-20arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspendMark Brown1-0/+2
The fields in SMCR_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us. Do so for SMCR_EL1.EZT0. Fixes: d4913eee152d ("arm64/sme: Add basic enumeration for SME2") Reported-by: Jackson Cooper-Driver <Jackson.Cooper-Driver@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-2-17e05e493471@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2024-02-20arm64/sme: Restore SME registers on exit from suspendMark Brown3-0/+19
The fields in SMCR_EL1 and SMPRI_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us. The vector length will be restored as part of restoring the SME state for the next SME using task. Fixes: a1f4ccd25cc2 ("arm64/sme: Provide Kconfig for SME") Reported-by: Jackson Cooper-Driver <Jackson.Cooper-Driver@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-1-17e05e493471@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2024-02-20Revert "arm64: jump_label: use constraints "Si" instead of "i""Will Deacon1-8/+4
This reverts commit f9daab0ad01cf9d165dbbbf106ca4e61d06e7fe8. Geert reports that his particular GCC 5.5 vintage toolchain fails to build an arm64 defconfig because of this change: | arch/arm64/include/asm/jump_label.h:25:2: error: invalid 'asm': | invalid operand | asm goto( ^ Aopparently, this is something we claim to support, so let's revert back to the old jump label constraint for now while discussions about raising the minimum GCC version are ongoing. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/CAMuHMdX+6fnAf8Hm6EqYJPAjrrLO9T7c=Gu3S8V_pqjSDowJ6g@mail.gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2024-02-20KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'Amit Machhiwal2-4/+42
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in below error as L1 qemu sends PVR value 'arch_compat' == 0 via ppc_set_compat ioctl. This triggers a condition failure in kvmppc_set_arch_compat() resulting in an EINVAL. qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid argument Also, a value of 0 for arch_compat generally refers the default compatibility of the host. But, arch_compat, being a Guest Wide Element in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a non-zero value. A value of 0 triggers a kernel trap during a reboot and consequently causes it to fail: [ 22.106360] reboot: Restarting system KVM: unknown exit, hardware reason ffffffffffffffea NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0 MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3 TB 00000000 00000000 DECR 0 GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000 GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033 GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000 GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004 GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000 GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288 GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000 GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000 CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000 SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 0000000000000000 HSRR1 0000000000000000 CFAR 0000000000000000 LPCR 0000000000020400 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000 kernel:trap=0xffffffea | pc=0x100 | msr=0x1000 This patch updates kvmppc_set_arch_compat() to use the host PVR value if 'compat_pvr' == 0 indicating that qemu doesn't want to enforce any specific PVR compat mode. The relevant part of the code might need a rework if PowerVM implements a support for `arch_compat == 0` in nestedv2 API. Fixes: 19d31c5f1157 ("KVM: PPC: Add support for nestedv2 guests") Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240207054526.3720087-1-amachhiw@linux.ibm.com
2024-02-20KVM/VMX: Move VERW closer to VMentry for MDS mitigationPawan Gupta2-4/+19
During VMentry VERW is executed to mitigate MDS. After VERW, any memory access like register push onto stack may put host data in MDS affected CPU buffers. A guest can then use MDS to sample host data. Although likelihood of secrets surviving in registers at current VERW callsite is less, but it can't be ruled out. Harden the MDS mitigation by moving the VERW mitigation late in VMentry path. Note that VERW for MMIO Stale Data mitigation is unchanged because of the complexity of per-guest conditional VERW which is not easy to handle that late in asm with no GPRs available. If the CPU is also affected by MDS, VERW is unconditionally executed late in asm regardless of guest having MMIO access. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
2024-02-20KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCHSean Christopherson2-5/+8
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF, for MDS mitigations as late as possible without needing to duplicate VERW for both paths. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
2024-02-20x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static keyPawan Gupta5-26/+7
The VERW mitigation at exit-to-user is enabled via a static branch mds_user_clear. This static branch is never toggled after boot, and can be safely replaced with an ALTERNATIVE() which is convenient to use in asm. Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user path. Also remove the now redundant VERW in exc_nmi() and arch_exit_to_user_mode(). Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
2024-02-20x86/entry_32: Add VERW just before userspace transitionPawan Gupta1-0/+3
As done for entry_64, add support for executing VERW late in exit to user path for 32-bit mode. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
2024-02-20x86/entry_64: Add VERW just before userspace transitionPawan Gupta2-0/+12
Mitigation for MDS is to use VERW instruction to clear any secrets in CPU Buffers. Any memory accesses after VERW execution can still remain in CPU buffers. It is safer to execute VERW late in return to user path to minimize the window in which kernel data can end up in CPU buffers. There are not many kernel secrets to be had after SWITCH_TO_USER_CR3. Add support for deploying VERW mitigation after user register state is restored. This helps minimize the chances of kernel data ending up into CPU buffers after executing VERW. Note that the mitigation at the new location is not yet enabled. Corner case not handled ======================= Interrupts returning to kernel don't clear CPUs buffers since the exit-to-user path is expected to do that anyways. But, there could be a case when an NMI is generated in kernel after the exit-to-user path has cleared the buffers. This case is not handled and NMI returning to kernel don't clear CPU buffers because: 1. It is rare to get an NMI after VERW, but before returning to userspace. 2. For an unprivileged user, there is no known way to make that NMI less rare or target it. 3. It would take a large number of these precisely-timed NMIs to mount an actual attack. There's presumably not enough bandwidth. 4. The NMI in question occurs after a VERW, i.e. when user state is restored and most interesting data is already scrubbed. Whats left is only the data that NMI touches, and that may or may not be of any interest. Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
2024-02-20x86/bugs: Add asm helpers for executing VERWPawan Gupta3-1/+37
MDS mitigation requires clearing the CPU buffers before returning to user. This needs to be done late in the exit-to-user path. Current location of VERW leaves a possibility of kernel data ending up in CPU buffers for memory accesses done after VERW such as: 1. Kernel data accessed by an NMI between VERW and return-to-user can remain in CPU buffers since NMI returning to kernel does not execute VERW to clear CPU buffers. 2. Alyssa reported that after VERW is executed, CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system call. Memory accesses during stack scrubbing can move kernel stack contents into CPU buffers. 3. When caller saved registers are restored after a return from function executing VERW, the kernel stack accesses can remain in CPU buffers(since they occur after VERW). To fix this VERW needs to be moved very late in exit-to-user path. In preparation for moving VERW to entry/exit asm code, create macros that can be used in asm. Also make VERW patching depend on a new feature flag X86_FEATURE_CLEAR_CPU_BUF. Reported-by: Alyssa Milburn <alyssa.milburn@intel.com> Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
2024-02-19parisc: Fix stack unwinderGuenter Roeck1-8/+6
Debugging shows a large number of unaligned access traps in the unwinder code. Code analysis reveals a number of issues with this code: - handle_interruption is passed twice through dereference_kernel_function_descriptor() - ret_from_kernel_thread, syscall_exit, intr_return, _switch_to_ret, and _call_on_stack are passed through dereference_kernel_function_descriptor() even though they are not declared as function pointers. To fix the problems, drop one of the calls to dereference_kernel_function_descriptor() for handle_interruption, and compare the other pointers directly. Fixes: 6414b30b39f9 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()") Fixes: 8e0ba125c2bf ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled") Cc: Helge Deller <deller@gmx.de> Cc: Sven Schnelle <svens@stackframe.org> Cc: John David Anglin <dave.anglin@bell.net> Cc: Charlie Jenkins <charlie@rivosinc.com> Cc: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2024-02-19powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controllerGaurav Batra3-6/+31
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240215221833.4817-1-gbatra@linux.ibm.com
2024-02-18Merge tag 'kbuild-fixes-v6.8-2' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-07 08:37:00 +0300