summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-03-21Merge tag 'perf-urgent-2021-03-21' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Boundary condition fixes for bugs unearthed by the perf fuzzer" * tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT perf/x86/intel: Fix a crash caused by zero PEBS status
2021-03-21Merge tag 'x86_urgent_for_v5.12-rc4' of ↵Linus Torvalds5-33/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The freshest pile of shiny x86 fixes for 5.12: - Add the arch-specific mapping between physical and logical CPUs to fix devicetree-node lookups - Restore the IRQ2 ignore logic - Fix get_nr_restart_syscall() to return the correct restart syscall number. Split in a 4-patches set to avoid kABI breakage when backporting to dead kernels" * tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/of: Fix CPU devicetree-node lookups x86/ioapic: Ignore IRQ2 again x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall() x86: Move TS_COMPAT back to asm/thread_info.h kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds2-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-20Merge tag 'riscv-for-linus-5.12-rc4' of ↵Linus Torvalds19-19/+55
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes for 5.12: - fix the SBI remote fence numbers for hypervisor fences, which had been transcribed in the wrong order in Linux. These fences are only used with the KVM patches applied. - fix a whole host of build warnings, these should have no functional change. - fix init_resources() to prevent an off-by-one error from causing an out-of-bounds array reference. This was manifesting during boot on vexriscv. - ensure the KASAN mappings are visible before proceeding to use them" * tag 'riscv-for-linus-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Correct SPARSEMEM configuration RISC-V: kasan: Declare kasan_shallow_populate() static riscv: Ensure page table writes are flushed when initializing KASAN vmalloc RISC-V: Fix out-of-bounds accesses in init_resources() riscv: Fix compilation error with Canaan SoC ftrace: Fix spelling mistake "disabed" -> "disabled" riscv: fix bugon.cocci warnings riscv: process: Fix no prototype for arch_dup_task_struct riscv: ftrace: Use ftrace_get_regs helper riscv: process: Fix no prototype for show_regs riscv: syscall_table: Reduce W=1 compilation warnings noise riscv: time: Fix no prototype for time_init riscv: ptrace: Fix no prototype warnings riscv: sbi: Fix comment of __sbi_set_timer_v01 riscv: irq: Fix no prototype warning riscv: traps: Fix no prototype warnings RISC-V: correct enum sbi_ext_rfence_fid
2021-03-20x86/apic/of: Fix CPU devicetree-node lookupsJohan Hovold1-0/+5
Architectures that describe the CPU topology in devicetree and do not have an identity mapping between physical and logical CPU ids must override the default implementation of arch_match_cpu_phys_id(). Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node() and of_cpu_device_node_get() which several drivers rely on. It also causes the CPU struct devices exported through sysfs to point to the wrong devicetree nodes. On x86, CPUs are described in devicetree using their APIC ids and those do not generally coincide with the logical ids, even if CPU0 typically uses APIC id 0. Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node lookups work also with SMP. Apart from fixing the broken sysfs devicetree-node links this likely does not affect current users of mainline kernels on x86. Fixes: 4e07db9c8db8 ("x86/devicetree: Use CPU description from Device Tree") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org
2021-03-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-114/+227
Pull kvm fixes from Paolo Bonzini: "Fixes for kvm on x86: - new selftests - fixes for migration with HyperV re-enlightenment enabled - fix RCU/SRCU usage - fixes for local_irq_restore misuse false positive" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID x86/kvm: Fix broken irq restoration in kvm_wait KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish selftests: kvm: add set_boot_cpu_id test selftests: kvm: add _vm_ioctl selftests: kvm: add get_msr_index_features selftests: kvm: Add basic Hyper-V clocksources tests KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment KVM: x86: hyper-v: Track Hyper-V TSC page status KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs KVM: x86: hyper-v: Limit guest to writing zero to HV_X64_MSR_TSC_EMULATION_STATUS KVM: x86/mmu: Store the address space ID in the TDP iterator KVM: x86/mmu: Factor out tdp_iter_return_to_root KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEs KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_page
2021-03-19Merge tag 's390-5.12-4' of ↵Linus Torvalds5-19/+34
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - disable preemption when accessing local per-cpu variables in the new counter set driver - fix by a factor of four increased steal time due to missing cputime_to_nsecs() conversion - fix PCI device structure leak * tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix leak of PCI device structure s390/vtime: fix increased steal time accounting s390/cpumf: disable preemption when accessing per-cpu variable
2021-03-19x86/ioapic: Ignore IRQ2 againThomas Gleixner1-0/+10
Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where the matrix allocator claimed to be out of vectors. He analyzed it down to the point that IRQ2, the PIC cascade interrupt, which is supposed to be not ever routed to the IO/APIC ended up having an interrupt vector assigned which got moved during unplug of CPU0. The underlying issue is that IRQ2 for various reasons (see commit af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated as a reserved system vector by the vector core code and is not accounted as a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2 which causes the IO/APIC setup to claim that interrupt which is granted by the vector domain because there is no sanity check. As a consequence the allocation counter of CPU0 underflows which causes a subsequent unplug to fail with: [ ... ] CPU 0 has 4294967295 vectors, 589 available. Cannot disable CPU There is another sanity check missing in the matrix allocator, but the underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic during the conversion to irqdomains. For almost 6 years nobody complained about this wreckage, which might indicate that this requirement could be lifted, but for any system which actually has a PIC IRQ2 is unusable by design so any routing entry has no effect and the interrupt cannot be connected to a device anyway. Due to that and due to history biased paranoia reasons restore the IRQ2 ignore logic and treat it as non existent despite a routing entry claiming otherwise. Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
2021-03-18x86/kvm: Fix broken irq restoration in kvm_waitWanpeng Li1-13/+10
After commit 997acaf6b4b59c (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUsWanpeng Li1-1/+1
In order to deal with noncoherent DMA, we should execute wbinvd on all dirty pCPUs when guest wbinvd exits to maintain data consistency. smp_call_function_many() does not execute the provided function on the local core, therefore replace it by on_each_cpu_mask(). Reported-by: Nadav Amit <namit@vmware.com> Cc: Nadav Amit <namit@vmware.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615517151-7465-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ishSean Christopherson2-52/+74
Fix a plethora of issues with MSR filtering by installing the resulting filter as an atomic bundle instead of updating the live filter one range at a time. The KVM_X86_SET_MSR_FILTER ioctl() isn't truly atomic, as the hardware MSR bitmaps won't be updated until the next VM-Enter, but the relevant software struct is atomically updated, which is what KVM really needs. Similar to the approach used for modifying memslots, make arch.msr_filter a SRCU-protected pointer, do all the work configuring the new filter outside of kvm->lock, and then acquire kvm->lock only when the new filter has been vetted and created. That way vCPU readers either see the old filter or the new filter in their entirety, not some half-baked state. Yuan Yao pointed out a use-after-free in ksm_msr_allowed() due to a TOCTOU bug, but that's just the tip of the iceberg... - Nothing is __rcu annotated, making it nigh impossible to audit the code for correctness. - kvm_add_msr_filter() has an unpaired smp_wmb(). Violation of kernel coding style aside, the lack of a smb_rmb() anywhere casts all code into doubt. - kvm_clear_msr_filter() has a double free TOCTOU bug, as it grabs count before taking the lock. - kvm_clear_msr_filter() also has memory leak due to the same TOCTOU bug. The entire approach of updating the live filter is also flawed. While installing a new filter is inherently racy if vCPUs are running, fixing the above issues also makes it trivial to ensure certain behavior is deterministic, e.g. KVM can provide deterministic behavior for MSRs with identical settings in the old and new filters. An atomic update of the filter also prevents KVM from getting into a half-baked state, e.g. if installing a filter fails, the existing approach would leave the filter in a half-baked state, having already committed whatever bits of the filter were already processed. [*] https://lkml.kernel.org/r/20210312083157.25403-1-yaoyuan0329os@gmail.com Fixes: 1a155254ff93 ("KVM: x86: Introduce MSR filtering") Cc: stable@vger.kernel.org Cc: Alexander Graf <graf@amazon.com> Reported-by: Yuan Yao <yaoyuan0329os@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210316184436.2544875-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18KVM: x86: hyper-v: Don't touch TSC page values when guest opted for ↵Vitaly Kuznetsov1-1/+25
re-enlightenment When guest opts for re-enlightenment notifications upon migration, it is in its right to assume that TSC page values never change (as they're only supposed to change upon migration and the host has to keep things as they are before it receives confirmation from the guest). This is mostly true until the guest is migrated somewhere. KVM userspace (e.g. QEMU) will trigger masterclock update by writing to HV_X64_MSR_REFERENCE_TSC, by calling KVM_SET_CLOCK,... and as TSC value and kvmclock reading drift apart (even slightly), the update causes TSC page values to change. The issue at hand is that when Hyper-V is migrated, it uses stale (cached) TSC page values to compute the difference between its own clocksource (provided by KVM) and its guests' TSC pages to program synthetic timers and in some cases, when TSC page is updated, this puts all stimer expirations in the past. This, in its turn, causes an interrupt storm and L2 guests not making much forward progress. Note, KVM doesn't fully implement re-enlightenment notification. Basically, the support for reenlightenment MSRs is just a stub and userspace is only expected to expose the feature when TSC scaling on the expected destination hosts is available. With TSC scaling, no real re-enlightenment is needed as TSC frequency doesn't change. With TSC scaling becoming ubiquitous, it likely makes little sense to fully implement re-enlightenment in KVM. Prevent TSC page from being updated after migration. In case it's not the guest who's initiating the change and when TSC page is already enabled, just keep it as it is: TSC value is supposed to be preserved across migration and TSC frequency can't change with re-enlightenment enabled. The guest is doomed anyway if any of this is not true. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18KVM: x86: hyper-v: Track Hyper-V TSC page statusVitaly Kuznetsov2-14/+52
Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it was updated from guest/host side or if we've failed to set it up (because e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no need to retry. Also, in a hypothetical situation when we are in 'always catchup' mode for TSC we can now avoid contending 'hv->hv_lock' on every guest enter by setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters() returns false. Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in get_time_ref_counter() to properly handle the situation when we failed to write the updated TSC page values to the guest. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17Merge tag 'mips-fixes_5.12_2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Fix for fdt alignment when image is compressed" * tag 'mips-fixes_5.12_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
2021-03-17KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUsVitaly Kuznetsov3-0/+26
When KVM_REQ_MASTERCLOCK_UPDATE request is issued (e.g. after migration) we need to make sure no vCPU sees stale values in PV clock structures and thus all vCPUs are kicked with KVM_REQ_CLOCK_UPDATE. Hyper-V TSC page clocksource is global and kvm_guest_time_update() only updates in on vCPU0 but this is not entirely correct: nothing blocks some other vCPU from entering the guest before we finish the update on CPU0 and it can read stale values from the page. Invalidate TSC page in kvm_gen_update_masterclock() to switch all vCPUs to using MSR based clocksource (HV_X64_MSR_TIME_REF_COUNT). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-17KVM: x86: hyper-v: Limit guest to writing zero to ↵Vitaly Kuznetsov1-0/+3
HV_X64_MSR_TSC_EMULATION_STATUS HV_X64_MSR_TSC_EMULATION_STATUS indicates whether TSC accesses are emulated after migration (to accommodate for a different host TSC frequency when TSC scaling is not supported; we don't implement this in KVM). Guest can use the same MSR to stop TSC access emulation by writing zero. Writing anything else is forbidden. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210316143736.964151-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-17riscv: Correct SPARSEMEM configurationKefeng Wang1-2/+2
There are two issues for RV32, 1) if use FLATMEM, it is useless to enable SPARSEMEM_STATIC. 2) if use SPARSMEM, both SPARSEMEM_VMEMMAP and SPARSEMEM_STATIC is enabled. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17RISC-V: kasan: Declare kasan_shallow_populate() staticPalmer Dabbelt1-1/+1
Without this I get a missing prototype warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: Ensure page table writes are flushed when initializing KASAN vmallocAlexandre Ghiti1-0/+2
Make sure that writes to kernel page table during KASAN vmalloc initialization are made visible by adding a sfence.vma. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17RISC-V: Fix out-of-bounds accesses in init_resources()Geert Uytterhoeven1-1/+2
init_resources() allocates an array of resources, based on the current total number of memory regions and reserved memory regions. However, allocating this array using memblock_alloc() might increase the number of reserved memory regions. If that happens, populating the array later based on the new number of regions will cause out-of-bounds writes beyond the end of the allocated array. Fix this by allocating one more entry, which may or may not be used. Fixes: 797f0375dd2ef5cd ("RISC-V: Do not allocate memblock while iterating reserved memblocks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: Fix compilation error with Canaan SoCDamien Le Moal1-0/+2
When CONFIG_SOC_CANAAN is selected, the K210 sysctl driver is always compiled. Since this driver early init function calls the function k210_clk_early_init() implemented by the K210 clk driver, this driver must also always be selected for compilation ot avoid build failures. Avoid such build failures by always selecting CONFIG_COMMON_CLK and CONFIG_COMMON_CLK_K210 when CONFIG_SOC_CANAAN is enabled. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Fixes: c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17ftrace: Fix spelling mistake "disabed" -> "disabled"Colin Ian King3-3/+3
There is a spelling mistake in a comment, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17riscv: fix bugon.cocci warningskernel test robot1-2/+1
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") CC: Guo Ren <guoren@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-03-17MIPS: vmlinux.lds.S: Fix appended dtb not properly alignedPaul Cercueil1-1/+1
Commit 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes") changed the alignment from STRUCT_ALIGNMENT bytes to 8 bytes. The commit's message makes it sound like it was actually done on purpose, but this is not the case. The commit was written when raw appended dtb were not aligned at all. The STRUCT_ALIGN() was added a few days before, in commit 7a05293af39f ("MIPS: boot/compressed: Copy DTB to aligned address"). The true purpose of the commit was not to align specifically to 8 bytes, but to make sure that the generated vmlinux' size was properly padded to the alignment required for DTBs. While the switch to 8-byte alignment worked for vmlinux-appended dtb blobs, it broke vmlinuz-appended dtb blobs, as the decompress routine moves the blob to a STRUCT_ALIGNMENT aligned address. Fix this by changing the raw appended dtb blob alignment from 8 bytes back to STRUCT_ALIGNMENT bytes in vmlinux.lds.S. Fixes: 6654111c893f ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes") Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-17x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTARTOleg Nesterov2-11/+3
Save the current_thread_info()->status of X86 in the new restart_block->arch_data field so TS_COMPAT_RESTART can be removed again. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210201174716.GA17898@redhat.com
2021-03-17x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()Oleg Nesterov2-24/+14
The comment in get_nr_restart_syscall() says: * The problem is that we can get here when ptrace pokes * syscall-like values into regs even if we're not in a syscall * at all. Yes, but if not in a syscall then the status & (TS_COMPAT|TS_I386_REGS_POKED) check below can't really help: - TS_COMPAT can't be set - TS_I386_REGS_POKED is only set if regs->orig_ax was changed by 32bit debugger; and even in this case get_nr_restart_syscall() is only correct if the tracee is 32bit too. Suppose that a 64bit debugger plays with a 32bit tracee and * Tracee calls sleep(2) // TS_COMPAT is set * User interrupts the tracee by CTRL-C after 1 sec and does "(gdb) call func()" * gdb saves the regs by PTRACE_GETREGS * does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1 * PTRACE_CONT // TS_COMPAT is cleared * func() hits int3. * Debugger catches SIGTRAP. * Restore original regs by PTRACE_SETREGS. * PTRACE_CONT get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the tracee calls ia32_sys_call_table[219] == sys_madvise. Add the sticky TS_COMPAT_RESTART flag which survives after return to user mode. It's going to be removed in the next step again by storing the information in the restart block. As a further cleanup it might be possible to remove also TS_I386_REGS_POKED with that. Test-case: $ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests $ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32 $ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil $ ./erestartsys-trap-debugger Unexpected: retval 1, errno 22 erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421 Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code") Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
2021-03-17x86: Move TS_COMPAT back to asm/thread_info.hOleg Nesterov2-9/+9
Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED. It was moved to asm/processor.h by b9d989c7218a ("x86/asm: Move the thread_info::status field to thread_struct"), then later 37a8f7c38339 ("x86/asm: Move 'status' from thread_struct to thread_info") moved the 'status' field back but TS_COMPAT was forgotten. Preparatory patch to fix the COMPAT case for get_nr_restart_syscall() Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
2021-03-16perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENTKan Liang1-0/+3
On a Haswell machine, the perf_fuzzer managed to trigger this message: [117248.075892] unchecked MSR access error: WRMSR to 0x3f1 (tried to write 0x0400000000000000) at rIP: 0xffffffff8106e4f4 (native_write_msr+0x4/0x20) [117248.089957] Call Trace: [117248.092685] intel_pmu_pebs_enable_all+0x31/0x40 [117248.097737] intel_pmu_enable_all+0xa/0x10 [117248.102210] __perf_event_task_sched_in+0x2df/0x2f0 [117248.107511] finish_task_switch.isra.0+0x15f/0x280 [117248.112765] schedule_tail+0xc/0x40 [117248.116562] ret_from_fork+0x8/0x30 A fake event called VLBR_EVENT may use the bit 58 of the PEBS_ENABLE, if the precise_ip is set. The bit 58 is reserved by the HW. Accessing the bit causes the unchecked MSR access error. The fake event doesn't support PEBS. The case should be rejected. Fixes: 097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1615555298-140216-2-git-send-email-kan.liang@linux.intel.com
2021-03-16perf/x86/intel: Fix a crash caused by zero PEBS statusKan Liang1-1/+1
A repeatable crash can be triggered by the perf_fuzzer on some Haswell system. https://lore.kernel.org/lkml/7170d3b-c17f-1ded-52aa-cc6d9ae999f4@maine.edu/ For some old CPUs (HSW and earlier), the PEBS status in a PEBS record may be mistakenly set to 0. To minimize the impact of the defect, the commit was introduced to try to avoid dropping the PEBS record for some cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates the local pebs_status accordingly. However, it doesn't correct the PEBS status in the PEBS record, which may trigger the crash, especially for the large PEBS. It's possible that all the PEBS records in a large PEBS have the PEBS status 0. If so, the first get_next_pebs_record_by_bit() in the __intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large PEBS, the 'count' parameter must > 1. The second get_next_pebs_record_by_bit() will crash. Besides the local pebs_status, correct the PEBS status in the PEBS record as well. Fixes: 01330d7288e0 ("perf/x86: Allow zero PEBS status with only single active event") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1615555298-140216-1-git-send-email-kan.liang@linux.intel.com
2021-03-16KVM: x86/mmu: Store the address space ID in the TDP iteratorSean Christopherson4-24/+13
Store the address space ID in the TDP iterator so that it can be retrieved without having to bounce through the root shadow page. This streamlines the code and fixes a Sparse warning about not properly using rcu_dereference() when grabbing the ID from the root on the fly. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210315233803.2706477-5-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16KVM: x86/mmu: Factor out tdp_iter_return_to_rootBen Gardon3-10/+19
In tdp_mmu_iter_cond_resched there is a call to tdp_iter_start which causes the iterator to continue its walk over the paging structure from the root. This is needed after a yield as paging structure could have been freed in the interim. The tdp_iter_start call is not very clear and something of a hack. It requires exposing tdp_iter fields not used elsewhere in tdp_mmu.c and the effect is not obvious from the function name. Factor a more aptly named function out of tdp_iter_start and call it from tdp_mmu_iter_cond_resched and tdp_iter_start. No functional change intended. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210315233803.2706477-4-bgardon@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEsBen Gardon1-1/+1
Fix a missing rcu_dereference in tdp_mmu_zap_spte_atomic. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210315233803.2706477-3-bgardon@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_pageBen Gardon1-3/+8
The pt passed into handle_removed_tdp_mmu_page does not need RCU protection, as it is not at any risk of being freed by another thread at that point. However, the implicit cast from tdp_sptep_t to u64 * dropped the __rcu annotation without a proper rcu_derefrence. Fix this by passing the pt as a tdp_ptep_t and then rcu_dereferencing it in the function. Suggested-by: Sean Christopherson <seanjc@google.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20210315233803.2706477-2-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15s390/pci: fix leak of PCI device structureNiklas Schnelle3-17/+31
In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the pci_dev_put() call matching the earlier pci_get_slot() done as part of __zpci_event_availability(). This was based on the wrong understanding that the device_put() done as part of pci_destroy_device() would counter the pci_get_slot() when it only counters the initial reference. This same understanding and existing bad example also lead to not doing a pci_dev_put() in zpci_remove_device(). Since releasing the PCI devices, unlike releasing the PCI slot, does not print any debug message for testing I added one in pci_release_dev(). This revealed that we are indeed leaking the PCI device on PCI hotunplug. Further testing also revealed another missing pci_dev_put() in disable_slot(). Fix this by adding the missing pci_dev_put() in disable_slot() and fix zpci_remove_device() with the correct pci_dev_put() calls. Also instead of calling pci_get_slot() in __zpci_event_availability() to determine if a PCI device is registered and then doing the same again in zpci_remove_device() do this once in zpci_remove_device() which makes sure that the pdev in __zpci_event_availability() is only used for the result of pci_scan_single_device() which does not need a reference count decremnt as its ownership goes to the PCI bus. Also move the check if zdev->zbus->bus is set into zpci_remove_device() since it may be that we're removing a device with devfn != 0 which never had a PCI bus. So we can still set the pdev->error_state to indicate that the device is not usable anymore, add a flag to set the error state. Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus") Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device() Cc: <stable@vger.kernel.org> # 5.8+ Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-15s390/vtime: fix increased steal time accountingGerald Schaefer1-1/+1
Commit 152e9b8676c6e ("s390/vtime: steal time exponential moving average") inadvertently changed the input value for account_steal_time() from "cputime_to_nsecs(steal)" to just "steal", resulting in broken increased steal time accounting. Fix this by changing it back to "cputime_to_nsecs(steal)". Fixes: 152e9b8676c6e ("s390/vtime: steal time exponential moving average") Cc: <stable@vger.kernel.org> # 5.1 Reported-by: Sabine Forkel <sabine.forkel@de.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-15s390/cpumf: disable preemption when accessing per-cpu variableThomas Richter1-1/+2
The following BUG message was triggered repeatedly when complete counter sets are extracted from the CPUMF: BUG: using smp_processor_id() in preemptible [00000000] code: psvc-readsets/7759 caller is cf_diag_needspace+0x2c/0x100 CPU: 7 PID: 7759 Comm: psvc-readsets Not tainted 5.12.0 Hardware name: IBM 3906 M03 703 (LPAR) Call Trace: [<00000000c7043f78>] show_stack+0x90/0xf8 [<00000000c705776a>] dump_stack+0xba/0x108 [<00000000c705d91c>] check_preemption_disabled+0xec/0xf0 [<00000000c63eb1c4>] cf_diag_needspace+0x2c/0x100 [<00000000c63ecbcc>] cf_diag_ioctl_start+0x10c/0x240 [<00000000c63ece9a>] cf_diag_ioctl+0x19a/0x238 [<00000000c675f3f4>] __s390x_sys_ioctl+0xc4/0x100 [<00000000c63ca762>] do_syscall+0x82/0xd0 [<00000000c705bdd8>] __do_syscall+0xc0/0xd8 [<00000000c706d532>] system_call+0x72/0x98 2 locks held by psvc-readsets/7759: #0: 00000000c75a57c0 (cpu_hotplug_lock){++++}-{0:0}, at: cf_diag_ioctl+0x44/0x238 #1: 00000000c75a3078 (cf_diag_ctrset_mutex){+.+.}-{3:3}, at: cf_diag_ioctl+0x54/0x238 This issue is a missing get_cpu_ptr/put_cpu_ptr pair in function cf_diag_needspace. Add it. Fixes: cf6acb8bdb1d ("s390/cpumf: Add support for complete counter set extraction") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-14Merge tag 'irq-urgent-2021-03-14' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of irqchip updates: - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct - Add a missing DT compatible string for the Ingenic driver - Remove the pointless debugfs_file pointer from struct irqdomain" * tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Add support for the JZ4760 dt-bindings/irq: Add compatible string for the JZ4760B irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly irqdomain: Remove debugfs_file from struct irq_domain
2021-03-14Merge tag 'objtool-urgent-2021-03-14' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Thomas Gleixner: "A single objtool fix to handle the PUSHF/POPF validation correctly for the paravirt changes which modified arch_local_irq_restore not to use popf" * tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool,x86: Fix uaccess PUSHF/POPF validation
2021-03-14Merge tag 'perf_urgent_for_v5.12-rc3' of ↵Linus Torvalds3-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Make sure PMU internal buffers are flushed for per-CPU events too and properly handle PID/TID for large PEBS. - Handle the case properly when there's no PMU and therefore return an empty list of perf MSRs for VMX to switch instead of reading random garbage from the stack. * tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR perf/core: Flush PMU internal buffers for per-CPU events
2021-03-14Merge tag 'x86_urgent_for_v5.12_rc3' of ↵Linus Torvalds9-29/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A couple of SEV-ES fixes and robustifications: verify usermode stack pointer in NMI is not coming from the syscall gap, correctly track IRQ states in the #VC handler and access user insn bytes atomically in same handler as latter cannot sleep. - Balance 32-bit fast syscall exit path to do the proper work on exit and thus not confuse audit and ptrace frameworks. - Two fixes for the ORC unwinder going "off the rails" into KASAN redzones and when ORC data is missing. * tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use __copy_from_user_inatomic() x86/sev-es: Correctly track IRQ states in runtime #VC handler x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack x86/sev-es: Introduce ip_within_syscall_gap() helper x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls x86/unwind/orc: Silence warnings caused by missing ORC data x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
2021-03-14Merge tag 'powerpc-5.12-3' of ↵Linus Torvalds7-9/+20
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.12: - Fix wrong instruction encoding for lis in ppc_function_entry(), which could potentially lead to missed kprobes. - Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of non-volatile GPRs immediately after exec. - Clean up a missed SRR specifier in the recent interrupt rework. - Don't treat unrecoverable_exception() as an interrupt handler, it's called from other handlers so shouldn't do the interrupt entry/exit accounting itself. - Fix build errors caused by missing declarations for [en/dis]able_kernel_vsx(). Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri Olsa, Naveen N. Rao, and Nicholas Piggin" * tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/traps: unrecoverable_exception() is not an interrupt handler powerpc: Fix missing declaration of [en/dis]able_kernel_vsx() powerpc/64s/exception: Clean up a missed SRR specifier powerpc: Fix inverted SET_FULL_REGS bitop powerpc/64s: Use symbolic macros for function entry encoding powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
2021-03-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds25-79/+184
Pull KVM fixes from Paolo Bonzini: "More fixes for ARM and x86" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: LAPIC: Advancing the timer expiration on guest initiated write KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged kvm: x86: annotate RCU pointers KVM: arm64: Fix exclusive limit for IPA size KVM: arm64: Reject VM creation when the default IPA size is unsupported KVM: arm64: Ensure I-cache isolation between vcpus of a same VM KVM: arm64: Don't use cbz/adr with external symbols KVM: arm64: Fix range alignment when walking page tables KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config() KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key KVM: arm64: Fix nVHE hyp panic host context restore KVM: arm64: Avoid corrupting vCPU context register in guest exit KVM: arm64: nvhe: Save the SPE context early kvm: x86: use NULL instead of using plain integer as pointer KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled' KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
2021-03-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-7/+19
Merge misc fixes from Andrew Morton: "28 patches. Subsystems affected by this series: mm (memblock, pagealloc, hugetlb, highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and ia64" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits) zram: fix broken page writeback zram: fix return value on writeback_store mm/memcg: set memcg when splitting page mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls mm/userfaultfd: fix memory corruption due to writeprotect kasan: fix KASAN_STACK dependency for HW_TAGS kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC mm/madvise: replace ptrace attach requirement for process_madvise include/linux/sched/mm.h: use rcu_dereference in in_vfork() kfence: fix reports if constant function prefixes exist kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations kfence: fix printk format for ptrdiff_t linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP* MAINTAINERS: exclude uapi directories in API/ABI section binfmt_misc: fix possible deadlock in bm_register_write mm/highmem.c: fix zero_user_segments() with start > end hugetlb: do early cow when page pinned on src mm mm: use is_cow_mapping() across tree where proper ...
2021-03-14powerpc: Force inlining of cpu_has_feature() to avoid build failureChristophe Leroy1-2/+2
The code relies on constant folding of cpu_has_feature() based on possible and always true values as defined per CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE. Build failure is encountered with for instance book3e_all_defconfig on kisskb in the AMDGPU driver which uses cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling kernel_enable_vsx() or not. The failure is due to cpu_has_feature() not being inlined with that configuration with gcc 4.9. In the same way as commit acdad8fb4a15 ("powerpc: Force inlining of mmu_has_feature to fix build failure"), for inlining of cpu_has_feature(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu
2021-03-14powerpc/vdso32: Add missing _restgpr_31_x to fix build failureChristophe Leroy1-0/+11
With some defconfig including CONFIG_CC_OPTIMIZE_FOR_SIZE, (for instance mvme5100_defconfig and ps3_defconfig), gcc 5 generates a call to _restgpr_31_x. Until recently it went unnoticed, but commit 42ed6d56ade2 ("powerpc/vdso: Block R_PPC_REL24 relocations") made it rise to the surface. Provide that function (copied from lib/crtsavres.S) in gettimeofday.S Fixes: ab037dd87a2f ("powerpc/vdso: Switch VDSO to generic C implementation.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a7aa198a88bcd33c6e35e99f70f86c7b7f2f9440.1615270757.git.christophe.leroy@csgroup.eu
2021-03-13Merge tag 'kbuild-fixes-v5.12-2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - avoid 'make image_name' invoking syncconfig - fix a couple of bugs in scripts/dummy-tools - fix LLD_VENDOR and locale issues in scripts/ld-version.sh - rebuild GCC plugins when the compiler is upgraded - allow LTO to be enabled with KASAN_HW_TAGS - allow LTO to be enabled without LLVM=1 * tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix ld-version.sh to not be affected by locale kbuild: remove meaningless parameter to $(call if_changed_rule,dtc) kbuild: remove LLVM=1 test from HAS_LTO_CLANG kbuild: remove unneeded -O option to dtc kbuild: dummy-tools: adjust to scripts/cc-version.sh kbuild: Allow LTO to be selected with KASAN_HW_TAGS kbuild: dummy-tools: support MPROFILE_KERNEL checks for ppc kbuild: rebuild GCC plugins when the compiler is upgraded kbuild: Fix ld-version.sh script if LLD was built with LLD_VENDOR kbuild: dummy-tools: fix inverted tests for gcc kbuild: add image_name to no-sync-config-targets
2021-03-13ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) signSergei Trofimovich1-1/+1
In https://bugs.gentoo.org/769614 Dmitry noticed that `ptrace(PTRACE_GET_SYSCALL_INFO)` does not return error sign properly. The bug is in mismatch between get/set errors: static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { return regs->r10 == -1 ? regs->r8:0; } static inline long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) { return regs->r8; } static inline void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, int error, long val) { if (error) { /* error < 0, but ia64 uses > 0 return value */ regs->r8 = -error; regs->r10 = -1; } else { regs->r8 = val; regs->r10 = 0; } } Tested on v5.10 on rx3600 machine (ia64 9040 CPU). Link: https://lkml.kernel.org/r/20210221002554.333076-2-slyfox@gentoo.org Link: https://bugs.gentoo.org/769614 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reported-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-13ia64: fix ia64_syscall_get_set_arguments() for break-based syscallsSergei Trofimovich1-6/+18
In https://bugs.gentoo.org/769614 Dmitry noticed that `ptrace(PTRACE_GET_SYSCALL_INFO)` does not work for syscalls called via glibc's syscall() wrapper. ia64 has two ways to call syscalls from userspace: via `break` and via `eps` instructions. The difference is in stack layout: 1. `eps` creates simple stack frame: no locals, in{0..7} == out{0..8} 2. `break` uses userspace stack frame: may be locals (glibc provides one), in{0..7} == out{0..8}. Both work fine in syscall handling cde itself. But `ptrace(PTRACE_GET_SYSCALL_INFO)` uses unwind mechanism to re-extract syscall arguments but it does not account for locals. The change always skips locals registers. It should not change `eps` path as kernel's handler already enforces locals=0 and fixes `break`. Tested on v5.10 on rx3600 machine (ia64 9040 CPU). Link: https://lkml.kernel.org/r/20210221002554.333076-1-slyfox@gentoo.org Link: https://bugs.gentoo.org/769614 Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reported-by: Dmitry V. Levin <ldv@altlinux.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-12Merge tag 'arm64-fixes' of ↵Linus Torvalds12-67/+88
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "We've got a smattering of changes all over the place which we've acrued since -rc1. To my knowledge, there aren't any pending issues at the moment, but there's still plenty of time for something else to crop up... Summary: - Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing - Fix pfn_valid() not to reject all ZONE_DEVICE memory - Fix memory tagging setup for hotplugged memory regions - Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled - Fix accidental truncation of CPU PMU event counters - Fix error code initialisation when failing probe of DMC620 PMU - Fix return value initialisation for sve-ptrace selftest - Drop broken support for CMDLINE_EXTEND" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe() arm64: mm: remove unused __cpu_uses_extended_idmap[_level()] arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds arm64: perf: Fix 64-bit event counter read truncation arm64/mm: Fix __enable_mmu() for new TGRAN range values kselftest: arm64: Fix exit code of sve-ptrace arm64: mte: Map hotplugged memory as Normal Tagged arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL arm64/mm: Reorganize pfn_valid() arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE arm64: Drop support for CMDLINE_EXTEND arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides