summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-11-18net: wan: Delete the DLCI / SDLA driversXie He3-3/+0
The DLCI driver (dlci.c) implements the Frame Relay protocol. However, we already have another newer and better implementation of Frame Relay provided by the HDLC_FR driver (hdlc_fr.c). The DLCI driver's implementation of Frame Relay is used by only one hardware driver in the kernel - the SDLA driver (sdla.c). The SDLA driver provides Frame Relay support for the Sangoma S50x devices. However, the vendor provides their own driver (along with their own multi-WAN-protocol implementations including Frame Relay), called WANPIPE. I believe most users of the hardware would use the vendor-provided WANPIPE driver instead. (The WANPIPE driver was even once in the kernel, but was deleted in commit 8db60bcf3021 ("[WAN]: Remove broken and unmaintained Sangoma drivers.") because the vendor no longer updated the in-kernel WANPIPE driver.) Cc: Mike McLagan <mike.mclagan@linux.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski32-272/+275
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13Merge tag 'net-5.10-rc4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETCMichael Walle1-0/+1
Since commit 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") the network port of the Kontron sl28 board is broken. After the migration to phylink the device tree has to specify the in-band-mode property. Add it. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201109110436.5906-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-113/+129
Pull kvm fixes from Paolo Bonzini: "ARM: - fix compilation error when PMD and PUD are folded - fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1 - add aarch64 get-reg-list test x86: - fix semantic conflict between two series merged for 5.10 - fix (and test) enforcement of paravirtual cpuid features selftests: - various cleanups to memory management selftests - new selftests testcase for performance of dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) KVM: selftests: allow two iterations of dirty_log_perf_test KVM: selftests: Introduce the dirty log perf test KVM: selftests: Make the number of vcpus global KVM: selftests: Make the per vcpu memory size global KVM: selftests: Drop pointless vm_create wrapper KVM: selftests: Add wrfract to common guest code KVM: selftests: Simplify demand_paging_test with timespec_diff_now KVM: selftests: Remove address rounding in guest code KVM: selftests: Factor code out of demand_paging_test KVM: selftests: Use a single binary for dirty/clear log test KVM: selftests: Always clear dirty bitmap after iteration KVM: selftests: Add blessed SVE registers to get-reg-list KVM: selftests: Add aarch64 get-reg-list test selftests: kvm: test enforcement of paravirtual cpuid features selftests: kvm: Add exception handling to selftests selftests: kvm: Clear uc so UCALL_NONE is being properly reported selftests: kvm: Fix the segment descriptor layout to match the actual layout KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs kvm: x86: request masterclock update any time guest uses different msr kvm: x86: ensure pv_cpuid.features is initialized when enabling cap ...
2020-11-08Merge tag 'x86-urgent-2020-11-08' of ↵Linus Torvalds5-32/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs integrated assembler upset - Correct the mitigation selection logic which prevented the related prctl to work correctly - Make the UV5 hubless system work correctly by fixing up the malformed table entries and adding the missing ones" * tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Recognize UV5 hubless system identifier x86/platform/uv: Remove spaces from OEM IDs x86/platform/uv: Fix missing OEM_TABLE_ID x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S
2020-11-08Merge tag 'powerpc-5.10-3' of ↵Linus Torvalds10-104/+44
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user() - fix for an RCU splat at boot caused by a recent lockdep change - fix for a possible deadlock in our EEH debugfs code - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms - build fix when CONFIG_NUMA=n Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai, and Scott Cheloha. * tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/numa: Fix build when CONFIG_NUMA=n powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry powerpc/8xx: Always fault when _PAGE_ACCESSED is not set powerpc/40x: Always fault when _PAGE_ACCESSED is not set powerpc/603: Always fault when _PAGE_ACCESSED is not set powerpc: Use asm_goto_volatile for put_user() powerpc/smp: Call rcu_cpu_starting() earlier powerpc/eeh_cache: Fix a possible debugfs deadlock
2020-11-08KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrsPankaj Gupta1-3/+3
Windows2016 guest tries to enable LBR by setting the corresponding bits in MSR_IA32_DEBUGCTLMSR. KVM does not emulate MSR_IA32_DEBUGCTLMSR and spams the host kernel logs with error messages like: kvm [...]: vcpu1, guest rIP: 0xfffff800a8b687d3 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop" This patch fixes this by enabling error logging only with 'report_ignored_msrs=1'. Signed-off-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Message-Id: <20201105153932.24316-1-pankaj.gupta.linux@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08kvm: x86: request masterclock update any time guest uses different msrOliver Upton1-1/+1
Commit 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21) subtly changed the behavior of guest writes to MSR_KVM_SYSTEM_TIME(_NEW). Restore the previous behavior; update the masterclock any time the guest uses a different msr than before. Fixes: 5b9bb0ebbcdc ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21) Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20201027231044.655110-6-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08kvm: x86: ensure pv_cpuid.features is initialized when enabling capOliver Upton3-7/+19
Make the paravirtual cpuid enforcement mechanism idempotent to ioctl() ordering by updating pv_cpuid.features whenever userspace requests the capability. Extract this update out of kvm_update_cpuid_runtime() into a new helper function and move its other call site into kvm_vcpu_after_set_cpuid() where it more likely belongs. Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20201027231044.655110-5-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08kvm: x86: reads of restricted pv msrs should also result in #GPOliver Upton1-0/+34
commit 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID") only protects against disallowed guest writes to KVM paravirtual msrs, leaving msr reads unchecked. Fix this by enforcing KVM_CPUID_FEATURES for msr reads as well. Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20201027231044.655110-4-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: x86: use positive error values for msr emulation that causes #GPMaxim Levitsky2-14/+22
Recent introduction of the userspace msr filtering added code that uses negative error codes for cases that result in either #GP delivery to the guest, or handled by the userspace msr filtering. This breaks an assumption that a negative error code returned from the msr emulation code is a semi-fatal error which should be returned to userspace via KVM_RUN ioctl and usually kill the guest. Fix this by reusing the already existing KVM_MSR_RET_INVALID error code, and by adding a new KVM_MSR_RET_FILTERED error code for the userspace filtered msrs. Fixes: 291f35fb2c1d1 ("KVM: x86: report negative values from wrmsr emulation to userspace") Reported-by: Qian Cai <cai@redhat.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20201101115523.115780-1-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: x86/mmu: fix counting of rmap entries in pte_list_addLi RongQing1-5/+7
Fix an off-by-one style bug in pte_list_add() where it failed to account the last full set of SPTEs, i.e. when desc->sptes is full and desc->more is NULL. Merge the two "PTE_LIST_EXT-1" checks as part of the fix to avoid an extra comparison. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <1601196297-24104-1-git-send-email-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08Merge tag 'kvmarm-fixes-5.10-2' of ↵Paolo Bonzini3-83/+43
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for v5.10, take #2 - Fix compilation error when PMD and PUD are folded - Fix regresssion of the RAZ behaviour of ID_AA64ZFR0_EL1
2020-11-08net: x25_asy: Delete the x25_asy driverXie He2-2/+0
This driver transports LAPB (X.25 link layer) frames over TTY links. I can safely say that this driver has no actual user because it was not working at all until: commit 8fdcabeac398 ("drivers/net/wan/x25_asy: Fix to make it work") The code in its current state still has problems: 1. The uses of "struct x25_asy" in x25_asy_unesc (when receiving) and in x25_asy_write_wakeup (when sending) are not protected by locks against x25_asy_change_mtu's changing of the transmitting/receiving buffers. Also, all "netif_running" checks in this driver are not protected by locks against the ndo_stop function. 2. The driver stops all TTY read/write when the netif is down. I think this is not right because this may cause the last outgoing frame before the netif goes down to be incompletely transmitted, and the first incoming frame after the netif goes up to be incompletely received. And there may also be other problems. I was planning to fix these problems but after recent discussions about deleting other old networking code, I think we may just delete this driver, too. Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20201105073434.429307-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07Merge tag 'riscv-for-linus-5.10-rc3' of ↵Linus Torvalds8-23/+47
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - SPDX comment style fix - ignore memory that is unusable - avoid setting a kernel text offset for the !MMU kernels, where skipping the first page of memory is both unnecessary and costly - avoid passing the flag bits in satp to pfn_to_virt() - fix __put_kernel_nofault, where we had the arguments to __put_user_nocheck reversed - workaround for a bug in the FU540 to avoid triggering PMP issues during early boot - change to how we pull symbols out of the vDSO. The old mechanism was removed from binutils-2.35 (and has been backported to Debian's 2.34) * tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix the VDSO symbol generaton for binutils-2.35+ RISC-V: Use non-PGD mappings for early DTB access riscv: uaccess: fix __put_kernel_nofault() riscv: fix pfn_to_virt err in do_page_fault(). riscv: Set text_offset correctly for M-Mode RISC-V: Remove any memblock representing unusable memory area risc-v: kernel: ftrace: Fixes improper SPDX comment style
2020-11-07x86/platform/uv: Recognize UV5 hubless system identifierMike Travis1-3/+10
Testing shows a problem in that UV5 hubless systems were not being recognized. Add them to the list of OEM IDs checked. Fixes: 6c7794423a998 ("Add UV5 direct references") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com
2020-11-07x86/platform/uv: Remove spaces from OEM IDsMike Travis1-0/+3
Testing shows that trailing spaces caused problems with the OEM_ID and the OEM_TABLE_ID. One being that the OEM_ID would not string compare correctly. Another the OEM_ID and OEM_TABLE_ID would be concatenated in the printout. Remove any trailing spaces. Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com
2020-11-07x86/platform/uv: Fix missing OEM_TABLE_IDMike Travis1-2/+5
Testing shows a problem in that the OEM_TABLE_ID was missing for hubless systems. This is used to determine the APIC type (legacy or extended). Add the OEM_TABLE_ID to the early hubless processing. Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab") Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com
2020-11-06Merge tag 'arm64-fixes' of ↵Linus Torvalds7-59/+67
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here's the weekly batch of fixes for arm64. Not an awful lot here, but there are still a few unresolved issues relating to CPU hotplug, RCU and IRQ tracing that I hope to queue fixes for next week. Summary: - Fix early use of kprobes - Fix kernel placement in kexec_file_load() - Bump maximum number of NUMA nodes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: try more regions if loading segments fails arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4
2020-11-06Merge tag 'arc-5.10-rc3' of ↵Linus Torvalds3-19/+22
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Unbork HSDKv1 platform (won't boot) due to memory map issue - Prevent stack unwinder from infinite looping * tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline ARC: stack unwinding: avoid indefinite looping
2020-11-06Merge tag 's390-5.10-3' of ↵Linus Torvalds8-40/+48
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - fix reference counting for ap devices - fix paes selftest - fix pmd_deref()/pud_deref() so they can also handle large pages - remove unused vdso file and defines - update defconfigs - call rcu_cpu_starting() early in smp init code to avoid lockdep warnings - fix hotplug of PCI function missing bus * tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix hot-plug of PCI function missing bus s390/smp: move rcu_cpu_starting() earlier s390/pkey: fix paes selftest failure with paes and pkey static build s390: update defconfigs s390/vdso: remove unused constants s390/vdso: remove empty unused file s390/mm: make pmd/pud_deref() large page aware s390/ap: fix ap devices reference counting
2020-11-06KVM: arm64: Remove AA64ZFR0_EL1 accessorsAndrew Jones1-50/+11
The AA64ZFR0_EL1 accessors are just the general accessors with its visibility function open-coded. It also skips the if-else chain in read_id_reg, but there's no reason not to go there. Indeed consolidating ID register accessors and removing lines of code make it worthwhile. Remove the AA64ZFR0_EL1 accessors, replacing them with the general accessors for sanitized ID registers. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201105091022.15373-5-drjones@redhat.com
2020-11-06KVM: arm64: Check RAZ visibility in ID register accessorsAndrew Jones2-3/+26
The instruction encodings of ID registers are preallocated. Until an encoding is assigned a purpose the register is RAZ. KVM's general ID register accessor functions already support both paths, RAZ or not. If for each ID register we can determine if it's RAZ or not, then all ID registers can build on the general functions. The register visibility function allows us to check whether a register should be completely hidden or not, extending it to also report when the register should be RAZ or not allows us to use it for ID registers as well. Check for RAZ visibility in the ID register accessor functions, allowing the RAZ case to be handled in a generic way for all system registers. The new REG_RAZ flag will be used in a later patch. This patch has no intended functional change. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201105091022.15373-4-drjones@redhat.com
2020-11-06KVM: arm64: Consolidate REG_HIDDEN_GUEST/USERAndrew Jones2-20/+10
REG_HIDDEN_GUEST and REG_HIDDEN_USER are always used together. Consolidate them into a single REG_HIDDEN flag. We can always add another flag later if some register needs to expose itself differently to the guest than it does to userspace. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201105091022.15373-3-drjones@redhat.com
2020-11-06KVM: arm64: Don't hide ID registers from userspaceAndrew Jones1-17/+1
ID registers are RAZ until they've been allocated a purpose, but that doesn't mean they should be removed from the KVM_GET_REG_LIST list. So far we only have one register, SYS_ID_AA64ZFR0_EL1, that is hidden from userspace when its function, SVE, is not present. Expose SYS_ID_AA64ZFR0_EL1 to userspace as RAZ when SVE is not implemented. Removing the userspace visibility checks is enough to reexpose it, as it will already return zero to userspace when SVE is not present. The register already behaves as RAZ for the guest when SVE is not present. Fixes: 73433762fcae ("KVM: arm64/sve: System register context switch and access support") Reported-by: 张东旭 <xu910121@sina.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org#v5.2+ Link: https://lore.kernel.org/r/20201105091022.15373-2-drjones@redhat.com
2020-11-06KVM: arm64: Fix build error in user_mem_abort()Gavin Shan1-0/+2
The PUD and PMD are folded into PGD when the following options are enabled. In that case, PUD_SHIFT is equal to PMD_SHIFT and we fail to build with the indicated errors: CONFIG_ARM64_VA_BITS_42=y CONFIG_ARM64_PAGE_SHIFT=16 CONFIG_PGTABLE_LEVELS=3 arch/arm64/kvm/mmu.c: In function ‘user_mem_abort’: arch/arm64/kvm/mmu.c:798:2: error: duplicate case value case PMD_SHIFT: ^~~~ arch/arm64/kvm/mmu.c:791:2: note: previously used here case PUD_SHIFT: ^~~~ This fixes the issue by skipping the check on PUD huge page when PUD and PMD are folded into PGD. Fixes: 2f40c46021bbb ("KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201103003009.32955-1-gshan@redhat.com
2020-11-06RISC-V: Fix the VDSO symbol generaton for binutils-2.35+Palmer Dabbelt3-9/+16
We were relying on GNU ld's ability to re-link executable files in order to extract our VDSO symbols. This behavior was deemed a bug as of binutils-2.35 (specifically the binutils-gdb commit a87e1817a4 ("Have the linker fail if any attempt to link in an executable is made."), but as that has been backported to at least Debian's binutils-2.34 in may manifest in other places. The previous version of this was a bit of a mess: we were linking a static executable version of the VDSO, containing only a subset of the input symbols, which we then linked into the kernel. This worked, but certainly wasn't a supported path through the toolchain. Instead this new version parses the textual output of nm to produce a symbol table. Both rely on near-zero addresses being linkable, but as we rely on weak undefined symbols being linkable elsewhere I don't view this as a major issue. Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06RISC-V: Use non-PGD mappings for early DTB accessAnup Patel1-0/+14
Currently, we use PGD mappings for early DTB mapping in early_pgd but this breaks Linux kernel on SiFive Unleashed because on SiFive Unleashed PMP checks don't work correctly for PGD mappings. To fix early DTB mappings on SiFive Unleashed, we use non-PGD mappings (i.e. PMD) for early DTB access. Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap") Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Tested-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06riscv: uaccess: fix __put_kernel_nofault()Changbin Du1-1/+1
The copy_from_kernel_nofault() is broken on riscv because the 'dst' and 'src' are mistakenly reversed in __put_kernel_nofault() macro. copy_to_kernel_nofault: ... 0xffffffe0003159b8 <+30>: sd a4,0(a1) # a1 aka 'src' Fixes: d464118cdc ("riscv: implement __get_kernel_nofault and __put_user_nofault") Signed-off-by: Changbin Du <changbin.du@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06riscv: fix pfn_to_virt err in do_page_fault().Liu Shaohua1-1/+3
The argument to pfn_to_virt() should be pfn not the value of CSR_SATP. Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: liush <liush@allwinnertech.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06powerpc/numa: Fix build when CONFIG_NUMA=nScott Cheloha1-3/+9
Add a non-NUMA definition for of_drconf_to_nid_single() to topology.h so we have one even if powerpc/mm/numa.c is not compiled. On a non-NUMA kernel the appropriate node id is always first_online_node. Fixes: 72cdd117c449 ("pseries/hotplug-memory: hot-add: skip redundant LMB lookup") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201105223040.3612663-1-cheloha@linux.ibm.com
2020-11-06riscv: Set text_offset correctly for M-ModeSean Anderson1-0/+5
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this should be calculated based on PAGE_OFFSET somehow? Even better would be to deprecate text_offset and instead introduce something absolute. Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-06arm64: kexec_file: try more regions if loading segments failsBenjamin Gwin2-11/+39
It's possible that the first region picked for the new kernel will make it impossible to fit the other segments in the required 32GB window, especially if we have a very large initrd. Instead of giving up, we can keep testing other regions for the kernel until we find one that works. Suggested-by: Ryan O'Leary <ryanoleary@google.com> Signed-off-by: Benjamin Gwin <bgwin@google.com> Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-05x86/speculation: Allow IBPB to be conditionally enabled on CPUs with ↵Anand K Mistry1-18/+33
always-on STIBP On AMD CPUs which have the feature X86_FEATURE_AMD_STIBP_ALWAYS_ON, STIBP is set to on and spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED At the same time, IBPB can be set to conditional. However, this leads to the case where it's impossible to turn on IBPB for a process because in the PR_SPEC_DISABLE case in ib_prctl_set() the spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED condition leads to a return before the task flag is set. Similarly, ib_prctl_get() will return PR_SPEC_DISABLE even though IBPB is set to conditional. More generally, the following cases are possible: 1. STIBP = conditional && IBPB = on for spectre_v2_user=seccomp,ibpb 2. STIBP = on && IBPB = conditional for AMD CPUs with X86_FEATURE_AMD_STIBP_ALWAYS_ON The first case functions correctly today, but only because spectre_v2_user_ibpb isn't updated to reflect the IBPB mode. At a high level, this change does one thing. If either STIBP or IBPB is set to conditional, allow the prctl to change the task flag. Also, reflect that capability when querying the state. This isn't perfect since it doesn't take into account if only STIBP or IBPB is unconditionally on. But it allows the conditional feature to work as expected, without affecting the unconditional one. [ bp: Massage commit message and comment; space out statements for better readability. ] Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.") Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20201105163246.v2.1.Ifd7243cd3e2c2206a893ad0a5b9a4f19549e22c6@changeid
2020-11-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds1-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - clarify a comment (Michael Kelley) - change a pr_warn() to pr_info() (Olaf Hering) * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Clarify comment on x2apic mode hv_balloon: disable warning when floor reached
2020-11-05RISC-V: Remove any memblock representing unusable memory areaAtish Patra1-11/+7
RISC-V limits the physical memory size by -PAGE_OFFSET. Any memory beyond that size from DRAM start is unusable. Just remove any memblock pointing to those memory region without worrying about computing the maximum size. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-05powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entryChristophe Leroy4-66/+28
When _PAGE_ACCESSED is not set, a minor fault is expected. To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED into the L2 entry valid bit. To simplify the processing and reduce the number of instructions in TLB miss exceptions, manage it as an APG bit and get it next to _PAGE_GUARDED bit to allow a copy in one go. Then declare the corresponding groups as handling all accesses as user accesses. As the PP bits always define user as No Access, it will generate a fault. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu
2020-11-05powerpc/8xx: Always fault when _PAGE_ACCESSED is not setChristophe Leroy1-12/+2
The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. This adds at least 3 instructions to the TLB miss exception handlers fast path. Following patch will reduce this overhead. Also update the rotation instruction to the correct number of bits to reflect all changes done to _PAGE_ACCESSED over time. Fixes: d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.") Fixes: 5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU") Fixes: e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits") Fixes: 5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC") Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
2020-11-05powerpc/40x: Always fault when _PAGE_ACCESSED is not setChristophe Leroy1-8/+0
The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. Fixes: 2c74e2586bb9 ("powerpc/40x: Rework 40x PTE access and TLB miss") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b02ca2ed2d3676a096219b48c0f69ec982a75bcf.1602342801.git.christophe.leroy@csgroup.eu
2020-11-05powerpc/603: Always fault when _PAGE_ACCESSED is not setChristophe Leroy1-12/+0
The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. Fixes: 84de6ab0e904 ("powerpc/603: don't handle PAGE_ACCESSED in TLB miss handlers.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a44367744de54e2315b2f1a8cbbd7f88488072e0.1602342806.git.christophe.leroy@csgroup.eu
2020-11-05powerpc: Use asm_goto_volatile for put_user()Michael Ellerman1-2/+2
Andreas reported that commit ee0a49a6870e ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()") broke CLONE_CHILD_SETTID. Further inspection showed that the put_user() in schedule_tail() was missing entirely, the store not emitted by the compiler. <.schedule_tail>: mflr r0 std r0,16(r1) stdu r1,-112(r1) bl <.finish_task_switch> ld r9,2496(r3) cmpdi cr7,r9,0 bne cr7,<.schedule_tail+0x60> ld r3,392(r13) ld r9,1392(r3) cmpdi cr7,r9,0 beq cr7,<.schedule_tail+0x3c> li r4,0 li r5,0 bl <.__task_pid_nr_ns> nop bl <.calculate_sigpending> nop addi r1,r1,112 ld r0,16(r1) mtlr r0 blr nop nop nop bl <.__balance_callback> b <.schedule_tail+0x1c> Notice there are no stores other than to the stack. There should be a stw in there for the store to current->set_child_tid. This is only seen with GCC 4.9 era compilers (tested with 4.9.3 and 4.9.4), and only when CONFIG_PPC_KUAP is disabled. When CONFIG_PPC_KUAP=y, the inline asm that's part of the isync() and mtspr() inlined via allow_user_access() seems to be enough to avoid the bug. We already have a macro to work around this (or a similar bug), called asm_volatile_goto which includes an empty asm block to tickle the compiler into generating the right code. So use that. With this applied the code generation looks more like it will work: <.schedule_tail>: mflr r0 std r31,-8(r1) std r0,16(r1) stdu r1,-144(r1) std r3,112(r1) bl <._mcount> nop ld r3,112(r1) bl <.finish_task_switch> ld r9,2624(r3) cmpdi cr7,r9,0 bne cr7,<.schedule_tail+0xa0> ld r3,2408(r13) ld r31,1856(r3) cmpdi cr7,r31,0 beq cr7,<.schedule_tail+0x80> li r4,0 li r5,0 bl <.__task_pid_nr_ns> nop li r9,-1 clrldi r9,r9,12 cmpld cr7,r31,r9 bgt cr7,<.schedule_tail+0x80> lis r9,16 rldicr r9,r9,32,31 subf r9,r31,r9 cmpldi cr7,r9,3 ble cr7,<.schedule_tail+0x80> li r9,0 stw r3,0(r31) <-- stw nop bl <.calculate_sigpending> nop addi r1,r1,144 ld r0,16(r1) ld r31,-8(r1) mtlr r0 blr nop bl <.__balance_callback> b <.schedule_tail+0x30> Fixes: ee0a49a6870e ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Andreas Schwab <schwab@linux-m68k.org> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201104111742.672142-1-mpe@ellerman.id.au
2020-11-05risc-v: kernel: ftrace: Fixes improper SPDX comment styleRyan Kosta1-1/+1
Signed-off-by: Ryan Kosta <ryanpkosta@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-11-04x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.SFangrui Song3-9/+3
Commit 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") added .weak directives to arch/x86/lib/mem*_64.S instead of changing the existing ENTRY macros to WEAK. This can lead to the assembly snippet .weak memcpy ... .globl memcpy which will produce a STB_WEAK memcpy with GNU as but STB_GLOBAL memcpy with LLVM's integrated assembler before LLVM 12. LLVM 12 (since https://reviews.llvm.org/D90108) will error on such an overridden symbol binding. Commit ef1e03152cb0 ("x86/asm: Make some functions local") changed ENTRY in arch/x86/lib/memcpy_64.S to SYM_FUNC_START_LOCAL, which was ineffective due to the preceding .weak directive. Use the appropriate SYM_FUNC_START_WEAK instead. Fixes: 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") Fixes: ef1e03152cb0 ("x86/asm: Make some functions local") Reported-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103012358.168682-1-maskray@google.com
2020-11-04ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservationsArd Biesheuvel2-4/+4
free_highpages() iterates over the free memblock regions in high memory, and marks each page as available for the memory management system. Until commit cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") it rounded beginning of each region upwards and end of each region downwards. However, after that commit free_highmem() rounds the beginning and end of each region downwards, and we may end up freeing a page that is memblock_reserve()d, resulting in memory corruption. Restore the original rounding of the region boundaries to avoid freeing reserved pages. Fixes: cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/ Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Co-developed-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-03Merge tag 'x86_seves_for_v5.10_rc3' of ↵Linus Torvalds8-8/+167
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES fixes from Borislav Petkov: "A couple of changes to the SEV-ES code to perform more stringent hypervisor checks before enabling encryption (Joerg Roedel)" * tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Do not support MMIO to/from encrypted memory x86/head/64: Check SEV encryption before switching to kernel page-table x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler x86/boot/compressed/64: Introduce sev_status
2020-11-03s390/pci: fix hot-plug of PCI function missing busNiklas Schnelle1-0/+4
Under some circumstances in particular with "Reconfigure I/O Path" a zPCI function may first appear in Standby through a PCI event with PEC 0x0302 which initially makes it visible to the zPCI subsystem, Only after that is it configured with a zPCI event with PEC 0x0301. If the zbus is still missing a PCI function zero (devfn == 0) when the PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets dereferenced in common code. Check for this case and enable but don't scan the zPCI function. This matches what would happen if we immediately got the 0x0301 configuration request or the function was included in CLP List PCI. In all cases the PCI functions with devfn != 0 will be scanned once function 0 appears. Fixes: 3047766bc6ec ("s390/pci: fix enabling a reserved PCI function") Cc: <stable@vger.kernel.org> # 5.8 Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/smp: move rcu_cpu_starting() earlierQian Cai1-1/+2
The call to rcu_cpu_starting() in smp_init_secondary() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: WARNING: suspicious RCU usage ----------------------------- kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. Call Trace: show_stack+0x158/0x1f0 dump_stack+0x1f2/0x238 __lock_acquire+0x2640/0x4dd0 lock_acquire+0x3a8/0xd08 _raw_spin_lock_irqsave+0xc0/0xf0 clockevents_register_device+0xa8/0x528 init_cpu_timer+0x33e/0x468 smp_init_secondary+0x11a/0x328 smp_start_secondary+0x82/0x88 This is avoided by moving the call to rcu_cpu_starting up near the beginning of the smp_init_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Signed-off-by: Qian Cai <cai@redhat.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390: update defconfigsHeiko Carstens3-9/+12
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/vdso: remove unused constantsHeiko Carstens1-8/+0
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>