summaryrefslogtreecommitdiff
path: root/block/blk-mq.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-22blk-mq: insert request not through ->queue_rq into sw/scheduler queueMing Lei1-1/+2
c616cbee97ae ("blk-mq: punt failed direct issue to dispatch list") supposed to add request which has been through ->queue_rq() to the hw queue dispatch list, however it adds request running out of budget or driver tag to hw queue too. This way basically bypasses request merge, and causes too many request dispatched to LLD, and system% is unnecessary increased. Fixes this issue by adding request not through ->queue_rq into sw/scheduler queue, and this way is safe because no ->queue_rq is called on this request yet. High %system can be observed on Azure storvsc device, and even soft lock is observed. This patch reduces %system during heavy sequential IO, meantime decreases soft lockup risk. Fixes: c616cbee97ae ("blk-mq: punt failed direct issue to dispatch list") Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-17blk-mq: order adding requests to hctx->dispatch and checking SCHED_RESTARTMing Lei1-0/+9
SCHED_RESTART code path is relied to re-run queue for dispatch requests in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding requests to hctx->dispatch. memory barriers have to be used for ordering the following two pair of OPs: 1) adding requests to hctx->dispatch and checking SCHED_RESTART in blk_mq_dispatch_rq_list() 2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch in blk_mq_sched_restart(). Without the added memory barrier, either: 1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in dispatch side or 2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue in dispatch side, meantime checking if there is request in hctx->dispatch from blk_mq_sched_restart() is missed. IO hang in ltp/fs_fill test is reported by kernel test robot: https://lkml.org/lkml/2020/7/26/77 Turns out it is caused by the above out-of-order OPs. And the IO hang can't be observed any more after applying this patch. Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Jeffery <djeffery@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-17block: blk-mq.c: fix @at_head kernel-doc warningRandy Dunlap1-0/+1
Fix a kernel-doc warning in block/blk-mq.c: ../block/blk-mq.c:1844: warning: Function parameter or member 'at_head' not described in 'blk_mq_request_bypass_insert' Fixes: 01e99aeca397 ("blk-mq: insert passthrough request into hctx->dispatch directly") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds1-140/+256
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-08-01block: blk-mq: delete duplicated wordRandy Dunlap1-1/+1
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28block: Use non _rcu version of list functions for tag_set_listDaniel Wagner1-2/+2
tag_set_list is only accessed under the tag_set_lock lock. There is no need for using the _rcu list functions. The _rcu list function were introduced to allow read access to the tag_set_list protected under RCU, see 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") and 05b79413946d ("Revert "blk-mq: don't handle TAG_SHARED in restart""). Those changes got reverted later but the cleanup commit missed a couple of places to undo the changes. Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()" Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-10blk-mq: remove redundant validation in __blk_mq_end_request()Baolin Wang1-2/+1
We've already validated the 'q->elevator' before calling ->ops.completed_request() in blk_mq_sched_completed_request(), thus no need to validate rq->internal_tag again. Rmove it. Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09blk-mq: centralise related handling into blk_mq_get_driver_tagMing Lei1-16/+15
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09blk-mq: streamline handling of q->mq_ops->queue_rq resultMing Lei1-13/+11
Current handling of q->mq_ops->queue_rq result is a bit ugly: - two branches which needs to 'continue' have to check if the dispatch local list is empty, otherwise one bad request may be retrieved via 'rq = list_first_entry(list, struct request, queuelist);' - the branch of 'if (unlikely(ret != BLK_STS_OK))' isn't easy to follow, since it is actually one error branch. Streamline this handling, so the code becomes more readable, meantime potential kernel oops can be avoided in case that the last request in local dispatch list is failed. Fixes: fc17b6534eb8 ("blk-mq: switch ->queue_rq return value to blk_status_t") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-07blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()Ming Lei1-2/+2
dm-multipath is the only user of blk_mq_queue_inflight(). When dm-multipath calls blk_mq_queue_inflight() to check if it has outstanding IO it can get a false negative. The reason for this is blk_mq_rq_inflight() doesn't consider requests that are no longer MQ_RQ_IN_FLIGHT but that are now MQ_RQ_COMPLETE (->complete isn't called or finished yet) as "inflight". This causes request-based dm-multipath's dm_wait_for_completion() to return before all outstanding dm-multipath requests have actually completed. This breaks DM multipath's suspend functionality because blk-mq requests complete after DM's suspend has finished -- which shouldn't happen. Fix this by considering any request not in the MQ_RQ_IDLE state (so either MQ_RQ_COMPLETE or MQ_RQ_IN_FLIGHT) as "inflight" in blk_mq_rq_inflight(). Fixes: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-02Revert "blk-mq: put driver tag when this request is completed"Jens Axboe1-36/+16
This reverts commits the following commits: 37f4a24c2469a10a4c16c641671bd766e276cf9f 723bf178f158abd1ce6069cb049581b3cb003aab 36a3df5a4574d5ddf59804fcd0c4e9654c514d9a The last one is the culprit, but we have to go a bit deeper to get this to revert cleanly. There's been a report that this breaks some MMC setups [1], and also causes an issue with swap [2]. Until this can be figured out, revert the offending commits. [1] https://lore.kernel.org/linux-block/57fb09b1-54ba-f3aa-f82c-d709b0e6b281@samsung.com/ [2] https://lore.kernel.org/linux-block/20200702043721.GA1087@lca.pw/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig1-5/+5
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig1-1/+1
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: centralise related handling into blk_mq_get_driver_tagMing Lei1-16/+14
Move .nr_active update and request assignment into blk_mq_get_driver_tag(), all are good to do during getting driver tag. Meantime blk-flush related code is simplified and flush request needn't to update the request table manually any more. Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: move blk_mq_put_driver_tag() into blk-mq.cMing Lei1-0/+20
It is used by blk-mq.c only, so move it to the source file. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: move blk_mq_get_driver_tag into blk-mq.cMing Lei1-0/+34
blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to stay in blk-mq.c, so move it and preparing for cleanup code of get/put driver tag. Meantime hctx_may_queue() is moved to header file and it is fine since it is defined as inline always. No functional change. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: support batching dispatch in case of ioMing Lei1-2/+0
More and more drivers want to get batching requests queued from block layer, such as mmc, and tcp based storage drivers. Also current in-tree users have virtio-scsi, virtio-blk and nvme. For none, we already support batching dispatch. But for io scheduler, every time we just take one request from scheduler and pass the single request to blk_mq_dispatch_rq_list(). This way makes batching dispatch not possible when io scheduler is applied. One reason is that we don't want to hurt sequential IO performance, becasue IO merge chance is reduced if more requests are dequeued from scheduler queue. Try to support batching dispatch for io scheduler by starting with the following simple approach: 1) still make sure we can get budget before dequeueing request 2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy we fackback to non-batching dispatch, otherwise dequeue as many as possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list(). Wrt. 2), we use similar policy for none, and turns out that SCSI SSD performance got improved much. In future, maybe we can develop more intelligent algorithem for batching dispatch. Baolin has tested this patch and found that MMC performance is improved[3]. [1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r [2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/ [3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: pass obtained budget count to blk_mq_dispatch_rq_listMing Lei1-4/+27
Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare for supporting fully batching submission. With the obtained budget count, it is easier to put extra budgets in case of .queue_rq failure. Meantime remove the old 'got_budget' parameter. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Christoph Hellwig <hch@infradead.org> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: remove dead check from blk_mq_dispatch_rq_listMing Lei1-7/+0
When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from .queue_rq, the 'list' variable always holds this rq which isn't queued to LLD successfully. So blk_mq_dispatch_rq_list() always returns false from the branch of '!list_empty(list)'. No functional change. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@infradead.org> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: move getting driver tag and budget into one helperMing Lei1-26/+40
Move code for getting driver tag and budget into one helper, so blk_mq_dispatch_rq_list gets a bit simplified, and easier to read. Meantime move updating of 'no_tag' and 'no_budget_available' into the branch for handling partial dispatch because that is exactly consumer of the two local variables. Also rename the parameter of 'got_budget' as 'ask_budget'. No functional change. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: pass hctx to blk_mq_dispatch_rq_listMing Lei1-3/+3
All requests in the 'list' of blk_mq_dispatch_rq_list belong to same hctx, so it is better to pass hctx instead of request queue, because blk-mq's dispatch target is hctx instead of request queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-30blk-mq: pass request queue into get/put budget callbackMing Lei1-4/+4
blk-mq budget is abstract from scsi's device queue depth, and it is always per-request-queue instead of hctx. It can be quite absurd to get a budget from one hctx, then dequeue a request from scheduler queue, and this request may not belong to this hctx, at least for bfq and deadline. So fix the mess and always pass request queue to get/put budget callback. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-mq: remove the BLK_MQ_REQ_INTERNAL flagChristoph Hellwig1-7/+3
Just check for a non-NULL elevator directly to make the code more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29blk-mq: put driver tag when this request is completedMing Lei1-0/+2
It is natural to release driver tag when this request is completed by LLD or device since its purpose is for LLD use. One big benefit is that the released tag can be re-used quicker since bio_endio() may take too long. Meantime we don't need to release driver tag for flush request. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: add a new blk_mq_complete_request_remote APIChristoph Hellwig1-19/+26
This is a variant of blk_mq_complete_request_remote that only completes the request if it needs to be bounced to another CPU or a softirq. If the request can be completed locally the function returns false and lets the driver complete it without requring and indirect function call. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: factor out a blk_mq_complete_need_ipi helperChristoph Hellwig1-18/+21
Add a helper to decide if we can complete locally or need an IPI. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: remove the get_cpu/put_cpu pair in blk_mq_complete_requestChristoph Hellwig1-2/+1
We don't really care if we get migrated during the I/O completion. In the worth case we either perform an IPI that wasn't required, or complete the request on a CPU which we just migrated off. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig1-27/+7
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: merge the softirq vs non-softirq IPI logicChristoph Hellwig1-65/+20
Both the softirq path for single queue devices and the multi-queue completion handler share the same logic to figure out if we need an IPI for the completion and eventually issue it. Merge the two versions into a single unified code path. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: short cut the IPI path in blk_mq_force_complete_rq for !SMPChristoph Hellwig1-1/+2
Let the compile optimize out the entire IPI path, given that we are obviously not going to use it. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: complete polled requests directlyChristoph Hellwig1-6/+11
Even for single queue devices there is no point in offloading a polled completion to the softirq, given that blk_mq_force_complete_rq is called from the polling thread in that case and thus there are no starvation issues. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: remove raise_blk_irqChristoph Hellwig1-30/+10
By open coding raise_blk_irq in the only caller, and replacing the ifdef CONFIG_SMP with an IS_ENABLED check the flow in the caller can be significantly simplified. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: factor out a helper to reise the block softirqChristoph Hellwig1-17/+14
Add a helper to deduplicate the logic that raises the block softirq. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: merge blk-softirq.c into blk-mq.cChristoph Hellwig1-0/+135
__blk_complete_request is only called from the blk-mq code, and duplicates a lot of code from blk-mq.c. Move it there to prepare for better code sharing and simplifications. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-18block: update hctx map when use multiple mapsWeiping Zhang1-1/+3
There is an issue when tune the number for read and write queues, if the total queue count was not changed. The hctx->type cannot be updated, since __blk_mq_update_nr_hw_queues will return directly if the total queue count has not been changed. Reproduce: dmesg | grep "default/read/poll" [ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default tune the write queues to 24: echo 24 > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dmesg | grep "default/read/poll" [ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default The driver's hardware queue mapping is not same as block layer. Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-07blk-mq: split out a __blk_mq_get_driver_tag helperChristoph Hellwig1-29/+0
Allocation of the driver tag in the case of using a scheduler shares very little code with the "normal" tag allocation. Split out a new helper to streamline this path, and untangle it from the complex normal tag allocation. This way also avoids to fail driver tag allocation because of inactive hctx during cpu hotplug, and fixes potential hang risk. Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: John Garry <john.garry@huawei.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: drain I/O when all CPUs in a hctx are offlineMing Lei1-2/+110
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctxChristoph Hellwig1-21/+23
blk_mq_alloc_request_hctx is only used for NVMeoF connect commands, so tailor it to the specific requirements, and don't bother the general fast path code with its special twinkles. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: use BLK_MQ_NO_TAG in more placesChristoph Hellwig1-7/+7
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAGChristoph Hellwig1-1/+1
To prepare for wider use of this constant give it a more applicable name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: move more request initialization to blk_mq_rq_ctx_initChristoph Hellwig1-17/+19
Don't split request initialization between __blk_mq_alloc_request and blk_mq_rq_ctx_init. Also remove the op argument as it can be derived from the blk_mq_alloc_data structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: simplify the blk_mq_get_request calling conventionChristoph Hellwig1-14/+22
The bio argument is entirely unused, and the request_queue can be passed through the alloc_data, given that it needs to be filled out for the low-level tag allocation anyway. Also rename the function to __blk_mq_alloc_request as the switch between get and alloc in the call chains is rather confusing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: remove the bio argument to ->prepare_requestChristoph Hellwig1-1/+1
None of the I/O schedulers actually needs it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: blk-mq: provide forced completion methodKeith Busch1-2/+13
Drivers may need to bypass error injection for error recovery. Rename __blk_mq_complete_request() to blk_mq_force_complete_rq() and export that function so drivers may skip potential fake timeouts after they've reclaimed lost requests. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-27block: add a blk_account_io_merge_bio helperKonstantin Khlebnikov1-1/+1
Move the non-"new_io" branch of blk_account_io_start() into separate function. Fix merge accounting for discards (they were counted as write merges). The new blk_account_io_merge_bio() doesn't call update_io_ticks() unlike blk_account_io_start(), as there is no reason for that. [hch: rebased] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: allow blk_mq_make_request to consume the q_usage_counter referenceChristoph Hellwig1-6/+7
blk_mq_make_request currently needs to grab an q_usage_counter reference when allocating a request. This is because the block layer grabs one before calling blk_mq_make_request, but also releases it as soon as blk_mq_make_request returns. Remove the blk_queue_exit call after blk_mq_make_request returns, and instead let it consume the reference. This works perfectly fine for the block layer caller, just device mapper needs an extra reference as the old problem still persists there. Open code blk_queue_enter_live in device mapper, as there should be no other callers and this allows better documenting why we do a non-try get. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: remove a pointless queue enter pair in blk_mq_alloc_request_hctxChristoph Hellwig1-3/+0
No need for two queue references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: remove a pointless queue enter pair in blk_mq_alloc_requestChristoph Hellwig1-3/+0
No need for two queue references. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-19blk-mq: move the call to blk_queue_enter_live out of blk_mq_get_requestChristoph Hellwig1-11/+16
Move the blk_queue_enter_live calls into the callers, where they can successively be cleaned up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14block: Inline encryption support for blk-mqSatya Tangirala1-0/+13
We must have some way of letting a storage device driver know what encryption context it should use for en/decrypting a request. However, it's the upper layers (like the filesystem/fscrypt) that know about and manages encryption contexts. As such, when the upper layer submits a bio to the block layer, and this bio eventually reaches a device driver with support for inline encryption, the device driver will need to have been told the encryption context for that bio. We want to communicate the encryption context from the upper layer to the storage device along with the bio, when the bio is submitted to the block layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can represent an encryption context (note that we can't use the bi_private field in struct bio to do this because that field does not function to pass information across layers in the storage stack). We also introduce various functions to manipulate the bio_crypt_ctx and make the bio/request merging logic aware of the bio_crypt_ctx. We also make changes to blk-mq to make it handle bios with encryption contexts. blk-mq can merge many bios into the same request. These bios need to have contiguous data unit numbers (the necessary changes to blk-merge are also made to ensure this) - as such, it suffices to keep the data unit number of just the first bio, since that's all a storage driver needs to infer the data unit number to use for each data block in each bio in a request. blk-mq keeps track of the encryption context to be used for all the bios in a request with the request's rq_crypt_ctx. When the first bio is added to an empty request, blk-mq will program the encryption context of that bio into the request_queue's keyslot manager, and store the returned keyslot in the request's rq_crypt_ctx. All the functions to operate on encryption contexts are in blk-crypto.c. Upper layers only need to call bio_crypt_set_ctx with the encryption key, algorithm and data_unit_num; they don't have to worry about getting a keyslot for each encryption context, as blk-mq/blk-crypto handles that. Blk-crypto also makes it possible for request-based layered devices like dm-rq to make use of inline encryption hardware by cloning the rq_crypt_ctx and programming a keyslot in the new request_queue when necessary. Note that any user of the block layer can submit bios with an encryption context, such as filesystems, device-mapper targets, etc. Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>