Age | Commit message (Collapse) | Author | Files | Lines |
|
Freeze the queue earlier in del_gendisk so that the state does not
change while we remove debugfs and sysfs files.
Ming mentioned that being able to observer request in debugfs might
be useful while the queue is being frozen in del_gendisk, which is
made possible by this change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614074827.458955-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The elevator is only used for file system requests, which are stopped in
del_gendisk. Move disabling the elevator and freeing the scheduler tags
to the end of del_gendisk instead of doing that work in disk_release and
blk_cleanup_queue to avoid a use after free on q->tag_set from
disk_release as the tag_set might not be alive at that point.
Move the blk_qos_exit call as well, as it just depends on the elevator
exit and would be the only reason to keep the not exactly cheap queue
freeze in disk_release.
Fixes: e155b0c238b2 ("blk-mq: Use shared tags for shared sbitmap support")
Reported-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+3e3f419f4a7816471838@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220614074827.458955-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Historically we did distinguish between a flag that surpressed partition
scanning, and a combinations of the minors variable and another flag if
any partitions were supported. This was generally confusing and doesn't
make much sense, but some corner case uses of the loop driver actually
do want to support manually added partitions on a device that does not
actively scan for partitions. To make things worsee the loop driver
also wants to dynamically toggle the scanning for partitions on a live
gendisk, which makes the disk->flags updates non-atomic.
Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables
just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART
in the loop driver.
Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just use bdev_alignment_offset in disk_discard_alignment_show instead.
That helpers is the same except for an always false branch that doesn't
matter in this slow path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220415045258.199825-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This does the same as the open coded variant except for an extra branch,
and allows to remove queue_alignment_offset entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220415045258.199825-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
|
|
ida_alloc_range(..., min, max, ...) returns values from min to max,
inclusive.
So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor().
This is an issue because in device_add_disk(), this value is used in:
ddev->devt = MKDEV(disk->major, disk->first_minor);
and NR_EXT_DEVT is '(1 << MINORBITS)'.
So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow.
Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Significant refactoring and fixing of how DM core does bio-based IO
accounting with focus on fixing wildly inaccurate IO stats for
dm-crypt (and other DM targets that defer bio submission in their own
workqueues). End result is proper IO accounting, made possible by
targets being updated to use the new dm_submit_bio_remap() interface.
- Add hipri bio polling support (REQ_POLLED) to bio-based DM.
- Reduce dm_io and dm_target_io structs so that a single dm_io (which
contains dm_target_io and first clone bio) weighs in at 256 bytes.
For reference the bio struct is 128 bytes.
- Various other small cleanups, fixes or improvements in DM core and
targets.
- Update MAINTAINERS with my kernel.org email address to allow
distinction between my "upstream" and "Red" Hats.
* tag 'for-5.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (46 commits)
dm: consolidate spinlocks in dm_io struct
dm: reduce size of dm_io and dm_target_io structs
dm: switch dm_target_io booleans over to proper flags
dm: switch dm_io booleans over to proper flags
dm: update email address in MAINTAINERS
dm: return void from __send_empty_flush
dm: factor out dm_io_complete
dm cache: use dm_submit_bio_remap
dm: simplify dm_sumbit_bio_remap interface
dm thin: use dm_submit_bio_remap
dm: add WARN_ON_ONCE to dm_submit_bio_remap
dm: support bio polling
block: add ->poll_bio to block_device_operations
dm mpath: use DMINFO instead of printk with KERN_INFO
dm: stop using bdevname
dm-zoned: remove the ->name field in struct dmz_dev
dm: remove unnecessary local variables in __bind
dm: requeue IO if mapping table not yet available
dm io: remove stale comment block for dm_io()
dm thin metadata: remove unused dm_thin_remove_block and __remove
...
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
Throttled bios can't be issued after del_gendisk() is done, thus
it's better to cancel them immediately rather than waiting for
throttle is done.
For example, if user thread is throttled with low bps while it's
issuing large io, and the device is deleted. The user thread will
wait for a long time for io to return.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for supporting IO polling for bio-based driver.
Add ->poll_bio callback so that bio-based driver can provide their own
logic for polling bio.
Also fix ->submit_bio_bio typo in comment block above
__submit_bio_noacct.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Keep all teardown of file system I/O related functionality in one place.
There can't be file system I/O in disk_release(), so it is safe to move
rq_qos_exit() there.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220308055200.735835-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the calls to ioc_clear_queue and blk_mq_sched_free_rqs into
elevator_exit. Except for one call where we know we can't have io_cq
structures yet these always go together, and that extra call in an
error path is harmless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220308055200.735835-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There can't be file system I/O in disk_release(), so move the call to
blk_exit_queue() there, preparing to have the teardown of file system I/O
only functionality in one place, when the gendisk that is needed for it
is torn down.
We still need to freeze queue here since the request is freed after the
bio is completed and passthrough request rely on scheduler tags as well.
The disk can be released before or after queue is cleaned up, and we have
to free the scheduler request pool before blk_cleanup_queue returns,
while the static request pool has to be freed before exiting the
I/O scheduler.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[hch: rebased, updated the commit log]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220308055200.735835-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg works on FS bio level, so it is reasonable to make both blkcg and
gendisk sharing same lifetime. Meantime there won't be any FS IO when
releasing disk, so safe to move blkcg initialization/destroy into disk
allocation/release handler
Long term, we can move blkcg into gendisk completely.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220308055200.735835-10-hch@lst.de
[axboe: fixup missing blk-cgroup.h include]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the inflight IOs are slow and no new IOs are issued, we expect
iostat could manifest the IO hang problem. However after
commit 5b18b5a73760 ("block: delete part_round_stats and switch to less
precise counting"), io_tick and time_in_queue will not be updated until
the end of IO, and the avgqu-sz and %util columns of iostat will be zero.
Because it has using stat.nsecs accumulation to express time_in_queue
which is not suitable to change, and may %util will express the status
better when io hang occur. To fix io_ticks, we use update_io_ticks and
inflight to update io_ticks when diskstats_show and part_stat_show
been called.
Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220217064247.4041435-1-zhangwensheng5@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a method to notify the driver that the gendisk is about to be freed.
This allows drivers to tie the lifetime of their private data to that of
the gendisk and thus deal with device removal races without expensive
synchronization and boilerplate code.
A new flag is added so that ->free_disk is only called after a successful
call to add_disk, which significantly simplifies the error handling path
during probing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220215094514.3828912-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the legacy dev_t based autoloading optional and add a deprecation
warning. This kind of autoloading has ceased to be useful about 20 years
ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220104071647.164918-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ioctl(fd, LOOP_CTL_ADD, 1048576) causes
sysfs: cannot create duplicate filename '/dev/block/7:0'
message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0)
due to MINORMASK == 1048575. Verify that all minor numbers for that device
fit in the minor range.
Reported-by: wangyangbo <wangyangbo@uniontech.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
One device_add is called disk->ev will be freed by disk_release, so we
should free it twice. Fix this by allocating disk->ev after device_add
so that the extra local unwinding can be removed entirely.
Based on an earlier patch from Tetsuo Handa.
Reported-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com>
Fixes: 83cbce9574462c6b ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211221161851.788424-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch
critical area. However, this srcu instance stays at the end of hctx, and
it often takes standalone cacheline, often cold.
Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on
the indirect percpu variable which is allocated from heap instead of
being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It
doesn't matter if srcu structure stays in hctx or request queue.
So switch to per-request-queue srcu for protecting dispatch, and this
way simplifies quiesce a lot, not mention quiesce is always done on the
request queue wide.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not needed, shift it into the source files that need it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211123185312.1432157-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No needed, shift it into the source files that need it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211123185312.1432157-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Hidden gendisks can't be opened using blkdev_get_*, so we can't really
reach any of the partition scanning paths or partitioning ioctls except
for the initial partition scan from add_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This flag is not set directly anywhere and only inherited from
GENHD_FL_HIDDEN. Just check for GENHD_FL_HIDDEN instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The GENHD_FL_NO_PART_SCAN controls more than just partitions canning,
so rename it to GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20211122130625.1136848-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unify the functionality that implements a partition rescan for a
gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
disk_max_parts never returns 0 given that ->minors for devices not using
the extended dev_t must be non-zero, and disk_max_parts always returns
DISK_MAX_PARTS for the latter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For avoiding to slow down queue destroy, we don't call
blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to
cancel dispatch work in blk_release_queue().
However, this way has caused kernel oops[1], reported by Changhui. The log
shows that scsi_device can be freed before running blk_release_queue(),
which is expected too since scsi_device is released after the scsi disk
is closed and the scsi_device is removed.
Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue()
and disk_release():
1) when disk_release() is run, the disk has been closed, and any sync
dispatch activities have been done, so canceling dispatch work is enough to
quiesce filesystem I/O dispatch activity.
2) in blk_cleanup_queue(), we only focus on passthrough request, and
passthrough request is always explicitly allocated & freed by
its caller, so once queue is frozen, all sync dispatch activity
for passthrough request has been done, then it is enough to just cancel
dispatch work for avoiding any dispatch activity.
[1] kernel panic log
[12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300
[12622.777186] #PF: supervisor read access in kernel mode
[12622.782918] #PF: error_code(0x0000) - not-present page
[12622.788649] PGD 0 P4D 0
[12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI
[12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1
[12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015
[12622.813321] Workqueue: kblockd blk_mq_run_work_fn
[12622.818572] RIP: 0010:sbitmap_get+0x75/0x190
[12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58
[12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202
[12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004
[12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030
[12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334
[12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000
[12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030
[12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000
[12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0
[12622.913328] Call Trace:
[12622.916055] <TASK>
[12622.918394] scsi_mq_get_budget+0x1a/0x110
[12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320
[12622.928404] ? pick_next_task_fair+0x39/0x390
[12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140
[12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60
[12622.944829] __blk_mq_run_hw_queue+0x30/0xa0
[12622.949593] process_one_work+0x1e8/0x3c0
[12622.954059] worker_thread+0x50/0x3b0
[12622.958144] ? rescuer_thread+0x370/0x370
[12622.962616] kthread+0x158/0x180
[12622.966218] ? set_kthread_struct+0x40/0x40
[12622.970884] ret_from_fork+0x22/0x30
[12622.974875] </TASK>
[12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_wdt mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_debug]
Reported-by: ChanghuiZhong <czhong@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211116014343.610501-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have done a spring cleaning on all drivers and added
error checking / handling, let's keep it that way and ensure
no new drivers fail to stick with it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20211110002949.999380-1-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
|
|
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
|
|
Commit 83cbce957446 ("block: add error handling for device_add_disk /
add_disk") added error handling to device_add_disk(), however the goto
label for the kobject_create_and_add() failure did not set the return
value correctly, and so we can end up in a situation where
kobject_create_and_add() fails but we report success.
Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org
[axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__register_blkdev() is used to register a probe callback, and
that callback is typically used to call add_disk(). Now that
we are able to capture errors for add_disk(), we need to fix
those probe calls where add_disk() fails and clean up resources.
We don't extend the probe call to return the error given:
1) we'd have to always special-case the case where the disk
was already present, as otherwise concurrent requests to
open an existing block device would fail, and this would be
a userspace visible change
2) the error from ilookup() on blkdev_get_no_open() is sufficient
3) The only thing the probe call is used for is to support
pre-devtmpfs, pre-udev semantics that want to create disks when
their pre-created device node is accessed, and so we don't care
for failures on probe there.
Expand documentation for the probe callback to ensure users cleanup
resources if add_disk() is used and to clarify this interface may be
removed in the future.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-12-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
|
|
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
|
|
Before removing disk from sysfs, userspace still may change queue via
sysfs, such as switching elevator or setting wbt latency, both may
reinitialize wbt, then the warning in blk_free_queue_stats() will be
triggered since rq_qos_exit() is moved to del_gendisk().
Fixes the issue by moving draining queue & tearing down after disk is
removed from sysfs, at that time no one can come into queue's
store()/show().
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211026101204.2897166-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To hide internal implementation and simplify some driver code,
this adds a helper to invalidate the gendisk. It will clean the
gendisk's associated buffer/page caches and reset its internal
states.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210922123711.187-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is called for every write in the fast path, move it inline next
to get_disk_ro() which is called internally.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reading the inode size brings in a new cacheline for IO submit, and
it's in the hot path being checked for every single IO. When doing
millions of IOs per core per second, this is noticeable overhead.
Cache the nr_sectors in the bdev itself.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert bdev->bd_disk->queue to bdev_get_queue(), it's uses a cached
queue pointer and so is faster.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/addf6ea988c04213697ba3684c853e4ed7642a39.1634219547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are tons of places where we need to get a request_queue only
having bdev, which turns into bdev->bd_disk->queue. There are probably a
hundred of such places considering inline helpers, and enough of them
are in hot paths.
Cache queue pointer in struct block_device and make use of it in
bdev_get_queue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a3bfaecdd28956f03629d0ca5c63ebc096e1c809.1634219547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop various include not actually used in genhd.h itself, and
move the remaning includes closer together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Warn when the last reference on a live disk is put without calling
del_gendisk first. There are some BDI related bug reports that look
like a case of this, so make sure we have the proper instrumentation
to catch it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't switch back to percpu mode to avoid the double RCU grace period
when tearing down SCSI devices. After removing the disk only passthrough
commands can be send anyway.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of delaying draining of file system I/O related items like the
blk-qos queues, the integrity read workqueue and timeouts only when the
request_queue is removed, do that when del_gendisk is called. This is
important for SCSI where the upper level drivers that control the gendisk
are separate entities, and the disk can be freed much earlier than the
request_queue, or can even be unbound without tearing down the queue.
Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot is reporting use-after-free read at bdev_free_inode() [1], for
kfree() from __alloc_disk_node() is called before bdev_free_inode()
(which is called after RCU grace period) reads bdev->bd_disk and calls
kfree(bdev->bd_disk).
Fix use-after-free read followed by double kfree() problem
by making sure that bdev->bd_disk is NULL when calling iput().
Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1]
Reported-by: syzbot <syzbot+8281086e8a6fbfbd952a@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/e6dd13c5-8db0-4392-6e78-a42ee5d2a1c4@i-love.sakura.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|