summaryrefslogtreecommitdiff
path: root/block/mq-deadline.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-18blk-mq: Stop using pointers for blk_mq_tags bitmap tagsJohn Garry1-1/+1
Now that we use shared tags for shared sbitmap support, we don't require the tags sbitmap pointers, so drop them. This essentially reverts commit 222a5ae03cdd ("blk-mq: Use pointers for blk_mq_tags bitmap tags"). Function blk_mq_init_bitmap_tags() is removed also, since it would be only a wrappper for blk_mq_init_bitmaps(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633429419-228500-14-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block/mq-deadline: Prioritize high-priority requestsBart Van Assche1-4/+73
In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block/mq-deadline: Stop using per-CPU countersBart Van Assche1-68/+56
Calculating the sum over all CPUs of per-CPU counters frequently is inefficient. Hence switch from per-CPU to individual counters. Three counters are protected by the mq-deadline spinlock since these are only accessed from contexts that already hold that spinlock. The fourth counter is atomic because protecting it with the mq-deadline spinlock would trigger lock contention. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block/mq-deadline: Add an invariant checkBart Van Assche1-6/+12
Check a statistics invariant at module unload time. When running blktests, the invariant is verified every time a request queue is removed and hence is verified at least once per test. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-3-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block/mq-deadline: Improve request accounting furtherBart Van Assche1-7/+10
The scheduler .insert_requests() callback is called when a request is queued for the first time and also when it is requeued. Only count a request the first time it is queued. Additionally, since the mq-deadline scheduler only performs zone locking for requests that have been inserted, skip the zone unlock code for requests that have not been inserted into the mq-deadline scheduler. Fixes: 38ba64d12d4c ("block/mq-deadline: Track I/O statistics") Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210927220328.1410161-2-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move elevator.h to block/Christoph Hellwig1-1/+1
Except for the features passed to blk_queue_required_elevator_features, elevator.h is only needed internally to the block layer. Move the ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to block/, dropping all the spurious includes outside of that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-02block/mq-deadline: Move dd_queued() to fix defined but not used warningGeert Uytterhoeven1-6/+6
If CONFIG_BLK_DEBUG_FS=n: block/mq-deadline.c:274:12: warning: ‘dd_queued’ defined but not used [-Wunused-function] 274 | static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio) | ^~~~~~~~~ Fix this by moving dd_queued() just before the sole function that calls it. Fixes: 7b05bf771084ff78 ("Revert "block/mq-deadline: Prioritize high-priority requests"") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 38ba64d12d4c ("block/mq-deadline: Track I/O statistics") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210830091128.1854266-1-geert@linux-m68k.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-31Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+2
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ...
2021-08-26Revert "block/mq-deadline: Prioritize high-priority requests"Jens Axboe1-37/+5
This reverts commit fb926032b3209300f9dc454a36b8299582ae545c. Zhen reports that this commit slows down mq-deadline on a 128 thread box, going from 258K IOPS to 170-180K. My testing shows that Optane gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box. Looking in detail at the code, the main culprit here is needing to sum percpu counters in the dispatch hot path, leading to very high CPU utilization there. To make matters worse, the code currently needs to sum 2 percpu counters, and it does so in the most naive way of iterating possible CPUs _twice_. Since we're close to release, revert this commit and we can re-do it with regular per-priority counters instead for the 5.15 kernel. Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/ Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25mq-deadline: Fix request accountingBart Van Assche1-5/+11
The block layer may call the I/O scheduler .finish_request() callback without having called the .insert_requests() callback. Make sure that the mq-deadline I/O statistics are correct if the block layer inserts an I/O request that bypasses the I/O scheduler. This patch prevents that lower priority I/O is delayed longer than necessary for mixed I/O priority workloads. Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-11Revert "block/mq-deadline: Add cgroup support"Tejun Heo1-0/+1130
This reverts commit 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") and a follow-up commit c06bc5a3fb42 ("block/mq-deadline: Remove a WARN_ON_ONCE() call"). The added cgroup support has the following issues: * It breaks cgroup interface file format rule by adding custom elements to a nested key-value file. * It registers mq-deadline as a cgroup-aware policy even though all it's doing is collecting per-cgroup stats. Even if we need these stats, this isn't the right way to add them. * It hasn't been reviewed from cgroup side. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add cgroup supportBart Van Assche1-1095/+0
Maintain statistics per cgroup and export these to user space. These statistics are essential for verifying whether the proper I/O priorities have been assigned to requests. An example of the statistics data with this patch applied: $ cat /sys/fs/cgroup/io.stat 11:2 rbytes=0 wbytes=0 rios=3 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0 8:32 rbytes=2142720 wbytes=0 rios=105 wios=0 dbytes=0 dios=0 [NONE] dispatched=0 inserted=0 merged=171 [RT] dispatched=0 inserted=0 merged=0 [BE] dispatched=0 inserted=0 merged=0 [IDLE] dispatched=0 inserted=0 merged=0 Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-16-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Track I/O statisticsBart Van Assche1-0/+100
Track I/O statistics per I/O priority and export these statistics to debugfs. These statistics help developers of the deadline scheduler. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-15-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add I/O priority supportBart Van Assche1-114/+228
Maintain one dispatch list and one FIFO list per I/O priority class: RT, BE and IDLE. Maintain statistics for each priority level. Split the debugfs attributes per priority level as follows: $ ls /sys/kernel/debug/block/.../sched/ async_depth dispatch2 read_next_rq write2_fifo_list batching read0_fifo_list starved write_next_rq dispatch0 read1_fifo_list write0_fifo_list dispatch1 read2_fifo_list write1_fifo_list Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-14-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Micro-optimize the batching algorithmBart Van Assche1-6/+5
When dispatching the first request of a batch, the deadline_move_request() call clears .next_rq[] for the opposite data direction. .next_rq[] is not restored when changing data direction. Fix this by not clearing .next_rq[] and by keeping track of the data direction of a batch in a variable instead. This patch is a micro-optimization because: - The number of deadline_next_request() calls for the read direction is halved. - The number of times that deadline_next_request() returns NULL is reduced. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-13-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Reserve 25% of scheduler tags for synchronous requestsBart Van Assche1-0/+55
For interactive workloads it is important that synchronous requests are not delayed. Hence reserve 25% of scheduler tags for synchronous requests. This patch still allows asynchronous requests to fill the hardware queues since blk_mq_init_sched() makes sure that the number of scheduler requests is the double of the hardware queue depth. From blk_mq_init_sched(): q->nr_requests = 2 * min_t(unsigned int, q->tag_set->queue_depth, BLKDEV_MAX_RQ); Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-12-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Improve the sysfs show and store macrosBart Van Assche1-37/+29
Define separate macros for integers and jiffies to improve readability. Use sysfs_emit() and kstrtoint() instead of sprintf() and simple_strtol(). The former functions are the recommended functions. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-11-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Improve compile-time argument checkingBart Van Assche1-47/+49
Modern compilers complain if an out-of-range value is passed to a function argument that has an enumeration type. Let the compiler detect out-of-range data direction arguments instead of verifying the data_dir argument at runtime. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-10-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Rename dd_init_queue() and dd_exit_queue()Bart Van Assche1-4/+4
Change "queue" into "sched" to make the function names reflect better the purpose of these functions. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-9-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Remove two local variablesBart Van Assche1-6/+2
Make __dd_dispatch_request() easier to read by removing two local variables. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-8-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add two lockdep_assert_held() statementsBart Van Assche1-0/+4
Document the locking strategy by adding two lockdep_assert_held() statements. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-7-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-22block/mq-deadline: Add several commentsBart Van Assche1-0/+18
Make the code easier to read by adding more comments. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-6-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-11kyber: fix out of bounds access when preemptedOmar Sandoval1-2/+1
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch. Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-16bfq/mq-deadline: remove redundant check for passthrough requestLin Feng1-5/+2
Since commit 01e99aeca39796003 'blk-mq: insert passthrough request into hctx->dispatch directly', passthrough request should not appear in IO-scheduler any more, so blk_rq_is_passthrough checking in addon IO schedulers is redundant. (Notes: this patch passes generic IO load test with hdds under SAS controller and hdds under AHCI controller but obviously not covers all. Not sure if passthrough request can still escape into IO scheduler from blk_mq_sched_insert_requests, which is used by blk_mq_flush_plug_list and has lots of indirect callers.) Signed-off-by: Lin Feng <linf@wangsu.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-22block: get rid of the trace rq insert wrapperChaitanya Kulkarni1-1/+3
Get rid of the wrapper for trace_block_rq_insert() and call the function directly. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25Revert "blk-mq, elevator: Count requests per hctx to improve performance"Jan Kara1-6/+0
This reverts commit b445547ec1bbd3e7bf4b1c142550942f70527d95. Since both mq-deadline and BFQ completely ignore hctx they are passed to their dispatch function and dispatch whatever request they deem fit checking whether any request for a particular hctx is queued is just pointless since we'll very likely get a request from a different hctx anyway. In the following commit we'll deal with lock contention in these IO schedulers in presence of multiple HW queues in a different way. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-04blk-mq, elevator: Count requests per hctx to improve performanceKashyap Desai1-0/+6
High CPU utilization on "native_queued_spin_lock_slowpath" due to lock contention is possible for mq-deadline and bfq IO schedulers when nr_hw_queues is more than one. It is because kblockd work queue can submit IO from all online CPUs (through blk_mq_run_hw_queues()) even though only one hctx has pending commands. The elevator callback .has_work for mq-deadline and bfq scheduler considers pending work if there are any IOs on request queue but it does not account hctx context. Add a per-hctx 'elevator_queued' count to the hctx to avoid triggering the elevator even though there are no requests queued. [jpg: Relocated atomic_dec() in dd_dispatch_request(), update commit message per Kashyap] Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-29blk-mq: remove the bio argument to ->prepare_requestChristoph Hellwig1-1/+1
None of the I/O schedulers actually needs it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-06block: Introduce elevator featuresDamien Le Moal1-0/+1
Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03block: mq-deadline: Fix queue restart handlingDamien Le Moal1-10/+9
Commit 7211aef86f79 ("block: mq-deadline: Fix write completion handling") added a call to blk_mq_sched_mark_restart_hctx() in dd_dispatch_request() to make sure that write request dispatching does not stall when all target zones are locked. This fix left a subtle race when a write completion happens during a dispatch execution on another CPU: CPU 0: Dispatch CPU1: write completion dd_dispatch_request() lock(&dd->lock); ... lock(&dd->zone_lock); dd_finish_request() rq = find request lock(&dd->zone_lock); unlock(&dd->zone_lock); zone write unlock unlock(&dd->zone_lock); ... __blk_mq_free_request check restart flag (not set) -> queue not run ... if (!rq && have writes) blk_mq_sched_mark_restart_hctx() unlock(&dd->lock) Since the dispatch context finishes after the write request completion handling, marking the queue as needing a restart is not seen from __blk_mq_free_request() and blk_mq_sched_restart() not executed leading to the dispatch stall under 100% write workloads. Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from dd_dispatch_request() into dd_finish_request() under the zone lock to ensure full mutual exclusion between write request dispatch selection and zone unlock on write request completion. Fixes: 7211aef86f79 ("block: mq-deadline: Fix write completion handling") Cc: stable@vger.kernel.org Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-15docs: block: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the block documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-20block: remove the bi_phys_segments field in struct bioChristoph Hellwig1-2/+3
We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig1-0/+1
Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17block: mq-deadline: Fix write completion handlingDamien Le Moal1-1/+11
For a zoned block device using mq-deadline, if a write request for a zone is received while another write was already dispatched for the same zone, dd_dispatch_request() will return NULL and the newly inserted write request is kept in the scheduler queue waiting for the ongoing zone write to complete. With this behavior, when no other request has been dispatched, rq_list in blk_mq_sched_dispatch_requests() is empty and blk_mq_sched_mark_restart_hctx() not called. This in turn leads to __blk_mq_free_request() call of blk_mq_sched_restart() to not run the queue when the already dispatched write request completes. The newly dispatched request stays stuck in the scheduler queue until eventually another request is submitted. This problem does not affect SCSI disk as the SCSI stack handles queue restart on request completion. However, this problem is can be triggered the nullblk driver with zoned mode enabled. Fix this by always requesting a queue restart in dd_dispatch_request() if no request was dispatched while WRITE requests are queued. Fixes: 5700f69178e9 ("mq-deadline: Introduce zone locking support") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Add missing export of blk_mq_sched_restart() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: get rid of MQ scheduler ops unionJens Axboe1-1/+1
This is a remnant of when we had ops for both SQ and MQ schedulers. Now it's just MQ, so get rid of the union. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove dead elevator codeJens Axboe1-1/+0
This removes a bunch of core and elevator related code. On the core front, we remove anything related to queue running, draining, initialization, plugging, and congestions. We also kill anything related to request allocation, merging, retrieval, and completion. Remove any checking for single queue IO schedulers, as they no longer exist. This means we can also delete a bunch of code related to request issue, adding, completion, etc - and all the SQ related ops and helpers. Also kill the load_default_modules(), as all that did was provide for a way to load the default single queue elevator. Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-24block drivers/block: Use octal not symbolic permissionsJoe Perches1-2/+1
Convert the S_<FOO> symbolic permissions to their octal equivalents as using octal and not symbolic permissions is preferred by many as more readable. see: https://lkml.org/lkml/2016/8/2/1945 Done with automated conversion via: $ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...> Miscellanea: o Wrapped modified multi-line calls to a single line where appropriate o Realign modified multi-line calls to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-01mq-deadline: Make sure to always unlock zonesDamien Le Moal1-3/+13
In case of a failed write request (all retries failed) and when using libata, the SCSI error handler calls scsi_finish_command(). In the case of blk-mq this means that scsi_mq_done() does not get called, that blk_mq_complete_request() does not get called and also that the mq-deadline .completed_request() method is not called. This results in the target zone of the failed write request being left in a locked state, preventing that any new write requests are issued to the same zone. Fix this by replacing the .completed_request() method with the .finish_request() method as this method is always called whether or not a request completes successfully. Since the .finish_request() method is only called by the blk-mq core if a .prepare_request() method exists, add a dummy .prepare_request() method. Fixes: 5700f69178e9 ("mq-deadline: Introduce zone locking support") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [ bvanassche: edited patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06mq-deadline: make it clear that __dd_dispatch_request() works on all hw queuesJens Axboe1-3/+8
Don't pass in the hardware queue to __dd_dispatch_request(), since it leads the reader to believe that we are returning a request for that specific hardware queue. That's not how mq-deadline works, the state for determining which request to serve next is shared across all hardware queues for a device. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-05mq-deadline: Introduce zone locking supportDamien Le Moal1-3/+86
Introduce zone write locking to avoid write request reordering with zoned block devices. This is achieved using a finer selection of the next request to dispatch: 1) Any non-write request is always allowed to proceed. 2) Any write to a conventional zone is always allowed to proceed. 3) For a write to a sequential zone, the zone lock is first checked. a) If the zone is not locked, the write is allowed to proceed after its target zone is locked. b) If the zone is locked, the write request is skipped and the next request in the dispatch queue tested (back to step 1). For a write request that has locked its target zone, the zone is unlocked either when the request completes with a call to the method deadline_request_completed() or when the request is requeued using dd_insert_request(). Requests targeting a locked zone are always left in the scheduler queue to preserve the lba ordering for write requests. If no write request can be dispatched, allow reads to be dispatched even if the write batch is not done. If the device used is not a zoned block device, or if zoned block device support is disabled, this patch does not modify mq-deadline behavior. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-05mq-deadline: Introduce dispatch helpersDamien Le Moal1-8/+37
Avoid directly referencing the next_rq and fifo_list arrays using the helper functions deadline_next_request() and deadline_fifo_request() to facilitate changes in the dispatch request selection in __dd_dispatch_request() for zoned block devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-25mq-deadline: add 'deadline' as a name aliasJens Axboe1-0/+1
The scheduler framework now supports looking up the appropriate scheduler with the {name,mq} tupple. We can register mq-deadline with the alias of 'deadline', so that switching to 'deadline' will do the right thing based on the type of driver attached to it. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-29mq-deadline: Enable auto-loading when built as moduleBen Hutchings1-0/+1
The block core requests modules with the "-iosched" name suffix, but mq-deadline does not have that suffix. Add an alias. Fixes: 945ffb60c11d ("mq-deadline: add blk-mq adaptation of the deadline ...") Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28block, scheduler: convert xxx_var_store to voidweiping zhang1-5/+4
The last parameter "count" never be used in xxx_var_store, convert these functions to void. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-05-04mq-deadline: add debugfs attributesOmar Sandoval1-0/+123
Expose the fifo lists, cached next requests, batching state, and dispatch list. It'd also be possible to add the sorted lists, but there aren't already seq_file helpers for rbtrees. Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-08block: enumify ELEVATOR_*_MERGEChristoph Hellwig1-1/+1
Switch these constants to an enum, and make let the compiler ensure that all callers of blk_try_merge and elv_merge handle all potential values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03block: free merged request in the callerJens Axboe1-2/+6
If we end up doing a request-to-request merge when we have completed a bio-to-request merge, we free the request from deep down in that path. For blk-mq-sched, the merge path has to hold the appropriate lock, but we don't need it for freeing the request. And in fact holding the lock is problematic, since we are now calling the mq sched put_rq_private() hook with the lock held. Other call paths do not hold this lock. Fix this inconsistency by ensuring that the caller frees a merged request. Then we can do it outside of the lock, making it both more efficient and fixing the blk-mq-sched problem of invoking parts of the scheduler with an unknown lock state. Reported-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-02-03blk-mq-sched: bypass the scheduler for flushes entirelyOmar Sandoval1-3/+0
There's a weird inconsistency that flushes are mostly hidden from the scheduler, but it needs to be aware of them in ->insert_requests(). Instead of having every scheduler call blk_mq_sched_bypass_insert(), let's do it in the common framework. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-01block: introduce blk_rq_is_passthroughChristoph Hellwig1-1/+1
This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27blk-mq-sched: change ->dispatch_requests() to ->dispatch_request()Jens Axboe1-4/+6
When we invoke dispatch_requests(), the scheduler empties everything into the passed in list. This isn't always a good thing, since it means that we remove items that we could have potentially merged with. Change the function to dispatch single requests at the time. If we do that, we can backoff exactly at the point where the device can't consume more IO, and leave the rest with the scheduler for better merging and future dispatch decision making. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Tested-by: Hannes Reinecke <hare@suse.com>