summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2018-12-12block: Fix null_blk_zoned creation failure with small number of zonesShin'ichiro Kawasaki1-1/+1
null_blk_zoned creation fails if the number of zones specified is equal to or is smaller than 64 due to a memory allocation failure in blk_alloc_zones(). With such a small number of zones, the required memory size for all zones descriptors fits in a single page, and the page order for alloc_pages_node() is zero. Allow this value in blk_alloc_zones() for the allocation to succeed. Fixes: bf5054569653 "block: Introduce blk_revalidate_disk_zones()" Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10block/bio: Do not zero user pagesKeith Busch1-1/+2
We don't need to zero fill the bio if not using kernel allocated pages. Fixes: f3587d76da05 ("block: Clear kernel memory before copying to user") # v4.20-rc2 Reported-by: Todd Aiken <taiken@mvtech.ca> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Cc: Bart Van Assche <bvanassche@acm.org> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07blk-mq: punt failed direct issue to dispatch listJens Axboe1-28/+5
After the direct dispatch corruption fix, we permanently disallow direct dispatch of non read/write requests. This works fine off the normal IO path, as they will be retried like any other failed direct dispatch request. But for the blk_insert_cloned_request() that only DM uses to bypass the bottom level scheduler, we always first attempt direct dispatch. For some types of requests, that's now a permanent failure, and no amount of retrying will make that succeed. This results in a livelock. Instead of making special cases for what we can direct issue, and now having to deal with DM solving the livelock while still retaining a BUSY condition feedback loop, always just add a request that has been through ->queue_rq() to the hardware queue dispatch list. These are safe to use as no merging can take place there. Additionally, if requests do have prepped data from drivers, we aren't dependent on them not sharing space in the request structure to safely add them to the IO scheduler lists. This basically reverts ffe81d45322c and is based on a patch from Ming, but with the list insert case covered as well. Fixes: ffe81d45322c ("blk-mq: fix corruption with direct issue") Cc: stable@vger.kernel.org Suggested-by: Ming Lei <ming.lei@redhat.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Ming Lei <ming.lei@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07block, bfq: fix decrement of num_active_groupsPaolo Valente3-25/+107
Since commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection")', if there are process groups with I/O requests waiting for completion, then BFQ tags the scenario as 'asymmetric'. This detection is needed for preserving service guarantees (for details, see comments on the computation * of the variable asymmetric_scenario in the function bfq_better_to_idle). Unfortunately, commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection")' contains an error exactly in the updating of the number of groups with I/O requests waiting for completion: if a group has more than one descendant process, then the above number of groups, which is renamed from num_active_groups to a more appropriate num_groups_with_pending_reqs by this commit, may happen to be wrongly decremented multiple times, namely every time one of the descendant processes gets all its pending I/O requests completed. A correct, complete solution should work as follows. Consider a group that is inactive, i.e., that has no descendant process with pending I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs is still accounting for this group, because the group still has some descendant process with some I/O request still in flight. num_groups_with_pending_reqs should be decremented when the in-flight request of the last descendant process is finally completed (assuming that nothing else has changed for the group in the meantime, in terms of composition of the group and active/inactive state of child groups and processes). To accomplish this, an additional pending-request counter must be added to entities, and must be updated correctly. To avoid this additional field and operations, this commit resorts to the following tradeoff between simplicity and accuracy: for an inactive group that is still counted in num_groups_with_pending_reqs, this commit decrements num_groups_with_pending_reqs when the first descendant process of the group remains with no request waiting for completion. This simplified scheme provides a fix to the unbalanced decrements introduced by 2d29c9f89fcd. Since this error was also caused by lack of comments on this non-trivial issue, this commit also adds related comments. Fixes: 2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection") Reported-by: Steven Barrett <steven@liquorix.net> Tested-by: Steven Barrett <steven@liquorix.net> Tested-by: Lucjan Lucjanov <lucjan.lucjanov@gmail.com> Reviewed-by: Federico Motta <federico@willer.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-05blk-mq: fix corruption with direct issueJens Axboe1-1/+25
If we attempt a direct issue to a SCSI device, and it returns BUSY, then we queue the request up normally. However, the SCSI layer may have already setup SG tables etc for this particular command. If we later merge with this request, then the old tables are no longer valid. Once we issue the IO, we only read/write the original part of the request, not the new state of it. This causes data corruption, and is most often noticed with the file system complaining about the just read data being invalid: [ 235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256) because most of it is garbage... This doesn't happen from the normal issue path, as we will simply defer the request to the hardware queue dispatch list if we fail. Once it's on the dispatch list, we never merge with it. Fix this from the direct issue path by flagging the request as REQ_NOMERGE so we don't change the size of it before issue. See also: https://bugzilla.kernel.org/show_bug.cgi?id=201685 Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 6ce3dd6eec1 ("blk-mq: issue directly if hw queue isn't busy in case of 'none'") Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30block: fix single range discard mergeMing Lei1-1/+1
There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0f4d329a ("blk-mq: fix discard merge with scheduler attached") Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Guangwu Zhang <guazhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14SCSI: fix queue cleanup race before queue initialization is doneMing Lei1-3/+2
c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones <drjones@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Cc: jianchao.wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14block: fix 32 bit overflow in __blkdev_issue_discard()Dave Chinner1-1/+3
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard") Tested-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Killed pointless WARN_ON(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12block: copy ioprio in __bio_clone_fast() and bounceHannes Reinecke2-0/+2
We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3ff0a ("block: move bio io prio to a new field") Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixed up subject, and ordered stores. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-blockLinus Torvalds4-22/+22
Pull block layer fixes from Jens Axboe: - Two fixes for an ubd regression, one for missing locking, and one for a missing initialization of a field. The latter was an old latent bug, but it's now visible and triggers (Me, Anton Ivanov) - Set of NVMe fixes via Christoph, but applied manually due to a git tree mixup (Christoph, Sagi) - Fix for a discard split regression, in three patches (Ming) - Update libata git trees (Geert) - SPDX identifier for sata_rcar (Kuninori Morimoto) - Virtual boundary merge fix (Johannes) - Preemptively clear memory we are going to pass to userspace, in case the driver does a short read (Keith) * tag 'for-linus-20181109' of git://git.kernel.dk/linux-block: block: make sure writesame bio is aligned with logical block size block: cleanup __blkdev_issue_discard() block: make sure discard bio is aligned with logical block size Revert "nvmet-rdma: use a private workqueue for delete" nvme: make sure ns head inherits underlying device limits nvmet: don't try to add ns to p2p map unless it actually uses it sata_rcar: convert to SPDX identifiers ubd: fix missing initialization of io_req block: Clear kernel memory before copying to user MAINTAINERS: Fix remaining pointers to obsolete libata.git ubd: fix missing lock around request issue block: respect virtual boundary mask in bvecs
2018-11-09block: make sure writesame bio is aligned with logical block sizeMing Lei1-1/+1
Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: b49a0871be31a745b2ef ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: cleanup __blkdev_issue_discard()Ming Lei1-17/+6
Cleanup __blkdev_issue_discard() a bit: - remove local variable of 'end_sect' - remove code block of 'fail' Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09block: make sure discard bio is aligned with logical block sizeMing Lei3-3/+13
Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7cbb56a6 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08block: Clear kernel memory before copying to userKeith Busch1-0/+1
If the kernel allocates a bounce buffer for user read data, this memory needs to be cleared before copying it to the user, otherwise it may leak kernel memory to user space. Laurence Oberman <loberman@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: respect virtual boundary mask in bvecsJohannes Thumshirn2-2/+2
With drivers that are settting a virtual boundary constrain, we are seeing a lot of bio splitting and smaller I/Os being submitted to the driver. This happens because the bio gap detection code does not account cases where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will split the bio unnecessarily. Cc: Jan Kara <jack@suse.cz> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-02Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-blockLinus Torvalds11-236/+166
Pull block layer fixes from Jens Axboe: "The biggest part of this pull request is the revert of the blkcg cleanup series. It had one fix earlier for a stacked device issue, but another one was reported. Rather than play whack-a-mole with this, revert the entire series and try again for the next kernel release. Apart from that, only small fixes/changes. Summary: - Indentation fixup for mtip32xx (Colin Ian King) - The blkcg cleanup series revert (Dennis Zhou) - Two NVMe fixes. One fixing a regression in the nvme request initialization in this merge window, causing nvme-fc to not work. The other is a suspend/resume p2p resource issue (James, Keith) - Fix sg discard merge, allowing us to merge in cases where we didn't before (Jianchao Wang) - Call rq_qos_exit() after the queue is frozen, preventing a hang (Ming) - Fix brd queue setup, fixing an oops if we fail setting up all devices (Ming)" * tag 'for-linus-20181102' of git://git.kernel.dk/linux-block: nvme-pci: fix conflicting p2p resource adds nvme-fc: fix request private initialization blkcg: revert blkcg cleanups series block: brd: associate with queue until adding disk block: call rq_qos_exit() after queue is frozen mtip32xx: clean an indentation issue, remove extraneous tabs block: fix the DISCARD request merge
2018-11-02Merge branch 'work.afs' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-11-02blkcg: revert blkcg cleanups seriesDennis Zhou9-224/+127
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: d459d853c2ed, b2c3fa546705, 101246ec02b5, b3b9f24f5fcc, e2b0989954ae, f0fcb3ec89f3, c839e7a03f92, bdc2491708c4, 74b7c02a9bc1, 5bf9a1f3b4ef, a7b39b4e961c, 07b05bcc3213, 49f4c2dc2b50, 27e6fa996c53 Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport2-2/+2
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31block: call rq_qos_exit() after queue is frozenMing Lei2-2/+3
rq_qos_exit() removes the current q->rq_qos, this action has to be done after queue is frozen, otherwise the IO queue path may never be waken up, then IO hang is caused. So fixes this issue by moving rq_qos_exit() after queue is frozen. Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-29block: fix the DISCARD request mergeJianchao Wang1-10/+36
There are two cases when handle DISCARD merge. If max_discard_segments == 1, the bios/requests need to be contiguous to merge. If max_discard_segments > 1, it takes every bio as a range and different range needn't to be contiguous. But now, attempt_merge screws this up. It always consider contiguity for DISCARD for the case max_discard_segments > 1 and cannot merge contiguous DISCARD for the case max_discard_segments == 1, because rq_attempt_discard_merge always returns false in this case. This patch fixes both of the two cases above. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-27Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-3/+5
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) hugetlbfs: dirty pages as they are added to pagecache mm: export add_swap_extent() mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page() mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page() mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t mm/gup: cache dev_pagemap while pinning pages Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved" mm: return zero_resv_unavail optimization mm: zero remaining unavailable struct pages tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option tools/testing/selftests/vm/gup_benchmark.c: allow user specified file tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage mm/gup_benchmark.c: add additional pinning methods mm/gup_benchmark.c: time put_page() mm: don't raise MEMCG_OOM event due to failed high-order allocation mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock ...
2018-10-27sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOADJohannes Weiner1-3/+5
There are several definitions of those functions/macros in places that mess with fixed-point load averages. Provide an official version. [akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c] Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Daniel Drake <drake@endlessm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-25block, bfq: fix asymmetric scenarios detectionFederico Motta1-12/+6
Since commit 2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection"), a scenario is defined asymmetric when one of the following conditions holds: - active bfq_queues have different weights - one or more group of entities (bfq_queue or other groups of entities) are active bfq grants fairness and low latency also in such asymmetric scenarios, by plugging the dispatching of I/O if the bfq_queue in service happens to be temporarily idle. This plugging may lower throughput, so it is important to do it only when strictly needed. By mistake, in commit '2d29c9f89fcd' ("block, bfq: improve asymmetric scenarios detection") the num_active_groups counter was firstly incremented and subsequently decremented at any entity (group or bfq_queue) weight change. This is useless, because only transitions from active to inactive and vice versa matter for that counter. Unfortunately this is also incorrect in the following case: the entity at issue is a bfq_queue and it is under weight raising. In fact in this case there is a spurious increment of the num_active_groups counter. This spurious increment may cause scenarios to be wrongly detected as asymmetric, thus causing useless plugging and loss of throughput. This commit fixes this issue by simply removing the above useless and wrong increments and decrements. Fixes: 2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection") Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Federico Motta <federico@willer.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25blk-mq: place trace_block_getrq() in correct placeXiaoguang Wang1-2/+2
trace_block_getrq() is to indicate a request struct has been allocated for queue, so put it in right place. Reviewed-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce blk_revalidate_disk_zones()Damien Le Moal3-0/+144
Drivers exposing zoned block devices have to initialize and maintain correctness (i.e. revalidate) of the device zone bitmaps attached to the device request queue (seq_zones_bitmap and seq_zones_wlock). To simplify coding this, introduce a generic helper function blk_revalidate_disk_zones() suitable for most (and likely all) cases. This new function always update the seq_zones_bitmap and seq_zones_wlock bitmaps as well as the queue nr_zones field when called for a disk using a request based queue. For a disk using a BIO based queue, only the number of zones is updated since these queues do not have schedulers and so do not need the zone bitmaps. With this change, the zone bitmap initialization code in sd_zbc.c can be replaced with a call to this function in sd_zbc_read_zones(), which is called from the disk revalidate block operation method. A call to blk_revalidate_disk_zones() is also added to the null_blk driver for devices created with the zoned mode enabled. Finally, to ensure that zoned devices created with dm-linear or dm-flakey expose the correct number of zones through sysfs, a call to blk_revalidate_disk_zones() is added to dm_table_set_restrictions(). The zone bitmaps allocated and initialized with blk_revalidate_disk_zones() are freed automatically from __blk_release_queue() using the block internal function blk_queue_free_zone_bitmaps(). Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: add a report_zones methodChristoph Hellwig3-115/+51
Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Expose queue nr_zones in sysfsDamien Le Moal1-0/+11
Expose through sysfs the nr_zones field of struct request_queue. Exposing this value helps in debugging disk issues as well as facilitating scripts based use of the disk (e.g. blktests). For zoned block devices, the nr_zones field indicates the total number of zones of the device calculated using the known disk capacity and zone size. This number of zones is always 0 for regular block devices. Since nr_zones is defined conditionally with CONFIG_BLK_DEV_ZONED, introduce the blk_queue_nr_zones() function to return the correct value for any device, regardless if CONFIG_BLK_DEV_ZONED is set. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Improve zone reset executionDamien Le Moal3-20/+24
There is no need to synchronously execute all REQ_OP_ZONE_RESET BIOs necessary to reset a range of zones. Similarly to what is done for discard BIOs in blk-lib.c, all zone reset BIOs can be chained and executed asynchronously and a synchronous call done only for the last BIO of the chain. Modify blkdev_reset_zones() to operate similarly to blkdev_issue_discard() using the next_bio() helper for chaining BIOs. To avoid code duplication of that function in blk_zoned.c, rename next_bio() into blk_next_bio() and declare it as a block internal function in blk.h. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce BLKGETNRZONES ioctlDamien Le Moal1-0/+2
Get a zoned block device total number of zones. The device can be a partition of the whole device. The number of zones is always 0 for regular block devices. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce BLKGETZONESZ ioctlDamien Le Moal1-0/+2
Get a zoned block device zone size in number of 512 B sectors. The zone size is always 0 for regular block devices. Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Limit allocation of zone descriptors for report zonesDamien Le Moal1-2/+1
There is no point in allocating more zone descriptors than the number of zones a block device has for doing a zone report. Avoid doing that in blkdev_report_zones_ioctl() by limiting the number of zone decriptors allocated internally to process the user request. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25block: Introduce blkdev_nr_zones() helperDamien Le Moal1-0/+27
Introduce the blkdev_nr_zones() helper function to get the total number of zones of a zoned block device. This number is always 0 for a regular block device (q->limits.zoned == BLK_ZONED_NONE case). Replace hard-coded number of zones calculation in dmz_get_zoned_device() with a call to this helper. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-24iov_iter: Use accessor functionDavid Howells1-1/+1
Use accessor functions to access an iterator's type and direction. This allows for the possibility of using some other method of determining the type of iterator than if-chains with bitwise-AND conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-22Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-blockLinus Torvalds30-1010/+1726
Pull block layer updates from Jens Axboe: "This is the main pull request for block changes for 4.20. This contains: - Series enabling runtime PM for blk-mq (Bart). - Two pull requests from Christoph for NVMe, with items such as; - Better AEN tracking - Multipath improvements - RDMA fixes - Rework of FC for target removal - Fixes for issues identified by static checkers - Fabric cleanups, as prep for TCP transport - Various cleanups and bug fixes - Block merging cleanups (Christoph) - Conversion of drivers to generic DMA mapping API (Christoph) - Series fixing ref count issues with blkcg (Dennis) - Series improving BFQ heuristics (Paolo, et al) - Series improving heuristics for the Kyber IO scheduler (Omar) - Removal of dangerous bio_rewind_iter() API (Ming) - Apply single queue IPI redirection logic to blk-mq (Ming) - Set of fixes and improvements for bcache (Coly et al) - Series closing a hotplug race with sysfs group attributes (Hannes) - Set of patches for lightnvm: - pblk trace support (Hans) - SPDX license header update (Javier) - Tons of refactoring patches to cleanly abstract the 1.2 and 2.0 specs behind a common core interface. (Javier, Matias) - Enable pblk to use a common interface to retrieve chunk metadata (Matias) - Bug fixes (Various) - Set of fixes and updates to the blk IO latency target (Josef) - blk-mq queue number updates fixes (Jianchao) - Convert a bunch of drivers from the old legacy IO interface to blk-mq. This will conclude with the removal of the legacy IO interface itself in 4.21, with the rest of the drivers (me, Omar) - Removal of the DAC960 driver. The SCSI tree will introduce two replacement drivers for this (Hannes)" * tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits) block: setup bounce bio_sets properly blkcg: reassociate bios when make_request() is called recursively blkcg: fix edge case for blk_get_rl() under memory pressure nvme-fabrics: move controller options matching to fabrics nvme-rdma: always have a valid trsvcid mtip32xx: fully switch to the generic DMA API rsxx: switch to the generic DMA API umem: switch to the generic DMA API sx8: switch to the generic DMA API sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code skd: switch to the generic DMA API ubd: remove use of blk_rq_map_sg nvme-pci: remove duplicate check drivers/block: Remove DAC960 driver nvme-pci: fix hot removal during error handling nvmet-fcloop: suppress a compiler warning nvme-core: make implicit seed truncation explicit nvmet-fc: fix kernel-doc headers nvme-fc: rework the request initialization code nvme-fc: introduce struct nvme_fcp_op_w_sgl ...
2018-10-21block: setup bounce bio_sets properlyJens Axboe1-9/+28
We're only setting up the bounce bio sets if we happen to need bouncing for regular HIGHMEM, not if we only need it for ISA devices. Protect the ISA bounce setup with a mutex, since it's being invoked from driver init functions and can thus be called in parallel. Cc: stable@vger.kernel.org Reported-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-21blkcg: reassociate bios when make_request() is called recursivelyDennis Zhou2-0/+21
When submitting a bio, multiple recursive calls to make_request() may occur. This causes the initial associate done in blkcg_bio_issue_check() to be incorrect and reference the prior request_queue. This introduces a helper to do reassociation when make_request() is recursively called. Fixes: a7b39b4e961c ("blkcg: always associate a bio with a blkg") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Dennis Zhou <dennis@kernel.org> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18block: don't deal with discard limit in blkdev_issue_discard()Ming Lei1-26/+2
blk_queue_split() does respect this limit via bio splitting, so no need to do that in blkdev_issue_discard(), then we can align to normal bio submit(bio_add_page() & submit_bio()). More importantly, this patch fixes one issue introduced in a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks"), in which zero discard bio may be generated in case of zero alignment. Fixes: a22c4d7e34402ccdf3 ("block: re-add discard_granularity and alignment checks") Cc: stable@vger.kernel.org Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16blk-mq: provide helper for setting up an SQ queue and tag setJens Axboe1-0/+33
This pattern is repeated throughout all the blk-mq conversions. Provide a basic helper to get it done. Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14block: remove bogus check for queue_lock assignmentJens Axboe1-2/+1
We just allocated the queue and haven't even set it up yet, hence we know that checking if ->mq_ops is NULL is always going to be true. In fact we do need to assign a lock to ->queue_lock always, as we need it for the queue flags modifications. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14blk-mq: fallback to previous nr_hw_queues when updating failsJianchao Wang1-3/+24
When we try to increate the nr_hw_queues, we may fail due to shortage of memory or other reason, then blk_mq_realloc_hw_ctxs stops and some entries in q->queue_hw_ctx are left with NULL. However, because queue map has been updated with new nr_hw_queues, some cpus have been mapped to hw queue which just encounters allocation failure, thus blk_mq_map_queue could return NULL. This will cause panic in following blk_mq_map_swqueue. To fix it, when increase nr_hw_queues fails, fallback to previous nr_hw_queues and post warning. At the same time, driver's .map_queues usually use completion irq affinity to map hw and cpu, fallback nr_hw_queues will cause lack of some cpu's map to hw, so use default blk_mq_map_queues to do that. Reported-by: syzbot+83e8cbe702263932d9d4@syzkaller.appspotmail.com Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14blk-mq: realloc hctx when hw queue is mapped to another nodeJianchao Wang1-26/+56
When the hw queues and mq_map are updated, a hctx could be mapped to a different numa node. At this moment, we need to realloc the hctx. If fail to do that, go on using previous hctx. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14blk-mq: change gfp flags to GFP_NOIO in blk_mq_realloc_hw_ctxsJianchao Wang4-12/+15
blk_mq_realloc_hw_ctxs could be invoked during update hw queues. At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL to GFP_NOIO to avoid forever hang during memory allocation in blk_mq_realloc_hw_ctxs. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14blk-mq: adjust debugfs and sysfs register when updating nr_hw_queuesJianchao Wang1-27/+12
blk-mq debugfs and sysfs entries need to be removed before updating queue map, otherwise, we get get wrong result there. This patch fixes it and remove the redundant debugfs and sysfs register/unregister operations during __blk_mq_update_nr_hw_queues. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-14block, bfq: improve asymmetric scenarios detectionFederico Motta3-131/+155
bfq defines as asymmetric a scenario where an active entity, say E (representing either a single bfq_queue or a group of other entities), has a higher weight than some other entities. If the entity E does sync I/O in such a scenario, then bfq plugs the dispatch of the I/O of the other entities in the following situation: E is in service but temporarily has no pending I/O request. In fact, without this plugging, all the times that E stops being temporarily idle, it may find the internal queues of the storage device already filled with an out-of-control number of extra requests, from other entities. So E may have to wait for the service of these extra requests, before finally having its own requests served. This may easily break service guarantees, with E getting less than its fair share of the device throughput. Usually, the end result is that E gets the same fraction of the throughput as the other entities, instead of getting more, according to its higher weight. Yet there are two other more subtle cases where E, even if its weight is actually equal to or even lower than the weight of any other active entities, may get less than its fair share of the throughput in case the above I/O plugging is not performed: 1. other entities issue larger requests than E; 2. other entities contain more active child entities than E (or in general tend to have more backlog than E). In the first case, other entities may get more service than E because they get larger requests, than those of E, served during the temporary idle periods of E. In the second case, other entities get more service because, by having many child entities, they have many requests ready for dispatching while E is temporarily idle. This commit addresses this issue by extending the definition of asymmetric scenario: a scenario is asymmetric when - active entities representing bfq_queues have differentiated weights, as in the original definition or (inclusive) - one or more entities representing groups of entities are active. This broader definition makes sure that I/O plugging will be performed in all the above cases, provided that there is at least one active group. Of course, this definition is very coarse, so it will trigger I/O plugging also in cases where it is not needed, such as, e.g., multiple active entities with just one child each, and all with the same I/O-request size. The reason for this coarse definition is just that a finer-grained definition would be rather heavy to compute. On the opposite end, even this new definition does not trigger I/O plugging in all cases where there is no active group, and all bfq_queues have the same weight. So, in these cases some unfairness may occur if there are asymmetries in I/O-request sizes. We made this choice because I/O plugging may lower throughput, and probably a user that has not created any group cares more about throughput than about perfect fairness. At any rate, as for possible applications that may care about service guarantees, bfq already guarantees a high responsiveness and a low latency to soft real-time applications automatically. Signed-off-by: Federico Motta <federico@willer.it> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-11blk-wbt: wake up all when we scale up, not downJosef Bacik1-1/+1
Tetsuo brought to my attention that I screwed up the scale_up/scale_down helpers when I factored out the rq-qos code. We need to wake up all the waiters when we add slots for requests to make, not when we shrink the slots. Otherwise we'll end up things waiting forever. This was a mistake and simply puts everything back the way it was. cc: stable@vger.kernel.org Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt") eported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-11cfq: clear queue pointers from cfqg after unpinning them in cfq_pd_offlineMaciej S. Szmigiero1-3/+9
BFQ is already doing a similar thing in its .pd_offline_fn() method implementation. While it seems that after commit 4c6994806f70 ("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()") was reverted leaving these pointers intact no longer causes crashes clearing them is still a sensible thing to do to make the code more robust. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-10block: remove redundant 'default n' from Kconfig-sBartlomiej Zolnierkiewicz2-10/+0
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-08blk-mq: complete req in softirq context in case of single queueMing Lei2-3/+16
Lot of controllers may have only one irq vector for completing IO request. And usually affinity of the only irq vector is all possible CPUs, however, on most of ARCH, there may be only one specific CPU for handling this interrupt. So if all IOs are completed in hardirq context, it is inevitable to degrade IO performance because of increased irq latency. This patch tries to address this issue by allowing to complete request in softirq context, like the legacy IO path. IOPS is observed as ~13%+ in the following randread test on raid0 over virtio-scsi. mdadm --create --verbose /dev/md0 --level=0 --chunk=1024 --raid-devices=8 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi fio --time_based --name=benchmark --runtime=30 --filename=/dev/md0 --nrfiles=1 --ioengine=libaio --iodepth=32 --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=32 --rw=randread --blocksize=4k Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Zach Marano <zmarano@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-05blk-mq-debugfs: Also show requests that have not yet been startedBart Van Assche1-2/+1
When debugging e.g. the SCSI timeout handler it is important that requests that have not yet been started or that already have completed are also reported through debugfs. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>